HP StorageWorks 8/8 Brocade Fabric OS Message Reference guide v6.2.0 (53-10011
HP StorageWorks 8/8 - SAN Switch Manual
View all HP StorageWorks 8/8 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks 8/8 manual content summary:
- HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 1
53-1001157-01 24 November 2008 Fabric OS Message Reference Supporting Fabric OS v6.2.0 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 2
, or service offered or to be offered by Brocade. Brocade reserves the brocade.com/support/oscd. Brocade Communications Systems, Incorporated Corporate Headquarters Brocade Communications Systems, Inc. 1745 Technology Drive San Update software and hardware support March 2004 ii Fabric OS Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 3
Message 53-1000046-01 Added BM, FCR, IPS, FCIP, SEC, and ZONE January 2006 Reference Manual messages Fabric OS System Error Message 53-1000046-02 Minor updates to a few messages. Reference Manual June 2006 Fabric OS Message Reference 53-1000242-01 -Updated for Fabric OS v5.2.0: -changed doc - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 4
-Added new chapters: CNM, CTAP, CVLC, CVLM, KAC, RKD, SPC, SPM -Added new Audit chapters: AG, FCIP, FICU, IPAD, PORT, SWCH, UCST -Updated Introductory chapters. Aug 2008 53-1001157-01 Updated for Fabric OS v6.2.0: -Revised and added new messages to FSS, KSWD, CTAP, CNM, CVLM, EM, FABR, FCIP, FW - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 5
In this chapter xlvii How this document is organized xlvii Supported hardware and software xlvii What's new in this document xlviii Auditing 2 System Logging Daemon (syslogd 3 System Console 4 Port Logs 4 Viewing and Configuring System Message Logs 4 Viewing System Messages from Web Tools - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 6
Responding to a System Message 11 Looking Up a System Message 11 Gathering Information About the Problem 12 Support 12 Panic Dump and Core Dump Files 12 Trace Dumps 13 supportSave Command 13 System Module Descriptions 13 Section I RASLog Messages Chapter 2 AG System Messages - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 7
Chapter 3 AG-1026 31 AG-1027 32 AG-1028 32 AG-1029 32 AUTH System Messages AUTH-1001 33 AUTH-1002 33 AUTH-1003 33 AUTH-1004 34 AUTH-1005 34 AUTH-1006 34 AUTH-1007 34 AUTH-1008 35 AUTH-1010 35 AUTH-1011 35 AUTH-1012 36 AUTH-1013 36 AUTH-1014 36 AUTH-1016 36 AUTH-1017 37 AUTH-1018 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 8
Chapter 4 Chapter 5 AUTH-1037 43 AUTH-1038 43 AUTH-1039 43 AUTH-1040 44 AUTH-1041 44 AUTH-1042 44 AUTH-1043 45 AUTH-1044 45 BKSW System Messages BKSW-1003 47 BL System Messages BL-1000 49 BL-1001 49 BL-1002 49 BL-1003 50 BL-1004 50 BL-1006 50 BL-1007 51 BL-1008 51 BL-1009 51 BL- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 9
Chapter 6 Chapter 7 Chapter 8 BL-1025 57 BL-1026 57 BL-1027 58 BL-1028 58 BL-1029 58 BL-1030 59 BL-1031 59 BL-1032 59 BL-1033 59 BL-1034 60 BL-1035 60 BL-1036 60 BL-1037 61 BLL System Messages BLL-1000 63 BM System Messages BM-1001 65 BM-1002 65 BM-1003 65 BM-1004 66 BM-1005 66 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 10
C2-1005 72 Chapter 9 CDR System Messages CDR-1001 73 CDR-1002 73 CDR-1003 73 CDR-1004 74 Chapter 10 CER System Messages CER-1001 75 Chapter 11 CHASSIS System Messages CHASSIS-1002 77 CHASSIS-1003 77 CHASSIS-1004 77 CHASSIS-1005 78 Chapter 12 CNM System Messages CNM-1001 79 CNM- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 11
CNM-1021 84 CNM-1022 84 CNM-1023 84 CNM-1024 84 CNM-1025 85 CNM-1026 85 CNM-1027 85 CNM-1028 85 CNM-1029 86 CNM-1030 86 CNM-1031 86 CNM-1032 86 CNM-1033 87 CNM-1034 87 CNM-1035 87 CNM-1036 87 CNM-1037 88 CNM-1038 88 CNM-1039 88 CNM-1040 88 CNM-1041 89 CNM-1042 89 CNM-1043 89 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 12
CVLC-1015 98 CVLC-1016 99 CVLC-1017 99 CVLC-1018 99 CVLC-1019 99 CVLC-1020 100 CVLC-1021 100 CVLC-1022 100 Chapter 16 CVLMSystem Messages CVLM-1001 101 CVLM-1002 101 CVLM-1003 101 CVLM-1004 101 CVLM-1005 102 CVLM-1006 102 CVLM-1007 102 CVLM-1008 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 13
Fabric OS Message Reference 53-1001157-01 EM-1002 105 EM-1003 105 EM-1004 106 EM-1005 106 EM-1006 107 EM-1007 107 EM-1008 107 EM-1009 108 EM-1010 108 EM-1011 108 EM-1012 108 EM-1013 109 EM-1014 109 EM-1015 109 EM-1016 110 EM-1017 110 EM-1018 110 EM-1019 110 EM-1028 111 EM-1029 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 14
EM-1055 117 EM-1056 117 EM-1057 117 EM-1058 118 EM-1059 118 EM-1060 118 EM-1061 119 EM-1062 119 EM-1063 119 EM-1064 119 EM-1065 120 EM-1066 120 EM-1067 120 EM-1068 121 EM-1069 121 EM-1070 121 EM-2003 121 Chapter 18 ESS System Messages ESS-1001 123 ESS-1002 123 ESS-1003 123 ESS- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 15
FABR-1010 130 FABR-1011 130 FABR-1012 130 FABR-1013 131 FABR-1014 131 FABR-1015 131 FABR-1016 132 FABR-1017 132 FABR-1018 132 FABR-1019 132 FABR-1020 133 FABR-1021 133 FABR-1022 133 FABR-1023 134 FABR-1024 134 FABR-1029 134 FABR-1030 135 FABR-1031 135 FABR-1032 135 FABR-1034 136 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 16
Messages FBC-1001 147 Chapter 23 FCIP System Messages FCIP-1000 149 FCIP-1001 149 FCIP-1002 149 FCIP-1003 149 FCIP-1004 150 Chapter 24 FCMC System Messages FCMC-1001 151 Chapter 25 FCPD System Messages FCPD-1001 153 FCPD-1002 153 FCPD-1003 153 Chapter 26 FCPH System Messages - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 17
Fabric OS Message Reference 53-1001157-01 FCR-1005 158 FCR-1006 158 FCR-1007 158 FCR-1008 158 FCR-1009 159 FCR-1010 159 FCR-1011 159 FCR-1012 160 FCR-1013 160 FCR-1015 160 FCR-1016 160 FCR-1018 161 FCR-1019 161 FCR-1020 161 FCR-1021 162 FCR-1022 162 FCR-1023 162 FCR-1024 163 FCR- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 18
FCR-1048 168 FCR-1049 168 FCR-1053 169 FCR-1054 169 FCR-1055 169 FCR-1056 170 FCR-1057 170 FCR-1058 170 FCR-1059 171 FCR-1060 171 FCR-1061 171 FCR-1062 171 FCR-1063 172 FCR-1064 172 FCR-1065 172 FCR-1066 173 FCR-1067 173 FCR-1068 173 FCR-1069 173 FCR-1070 174 FCR-1071 174 FCR- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 19
FCR-1088 179 FCR-1089 179 Chapter 28 FICON System Messages FICN-1003 181 FICN-1004 181 FICN-1005 182 FICN-1006 182 FICN-1007 182 FICN-1008 183 FICN-1009 183 FICN-1010 183 FICN-1011 183 FICN-1012 184 FICN-1013 184 FICN-1014 184 FICN-1015 185 FICN-1016 185 FICN-1017 185 FICN-1018 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 20
FICN-1036 190 FICN-1037 190 FICN-1038 191 FICN-1039 191 FICN-1040 191 FICN-1041 192 FICN-1042 192 FICN-1043 192 FICN-1044 192 FICN-1045 193 FICN-1046 193 FICN-1047 193 FICN-1048 194 FICN-1049 194 FICN-1050 194 FICN-1051 194 FICN-1052 195 FICN-1053 195 FICN-1054 195 FICN-1055 195 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 21
FICN-1073 200 FICN-1074 201 FICN-1075 201 FICN-1076 201 FICN-1077 202 FICN-1078 202 FICN-1079 202 FICN-1080 203 FICN-1081 203 FICN-1082 203 FICN-1083 204 FICN-1084 204 FICN-1085 204 FICN-1086 204 Chapter 29 FICU System Messages FICU-1001 205 FICU-1002 205 FICU-1003 205 FICU-1004 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 22
Chapter 32 FSPF System Messages FSPF-1001 213 FSPF-1002 213 FSPF-1003 213 FSPF-1005 214 FSPF-1006 214 Chapter 33 FSS System Messages FSS-1001 215 FSS-1002 215 FSS-1003 215 FSS-1004 216 FSS-1005 216 FSS-1006 216 FSS-1007 216 FSS-1008 217 FSS-1009 217 FSS-1010 217 FSS-1011 218 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 23
Fabric OS Message Reference 53-1001157-01 FW-1033 224 FW-1034 224 FW-1035 225 FW-1036 225 FW-1037 225 FW-1038 226 FW-1039 226 FW-1040 226 FW-1041 227 FW-1042 227 FW-1043 227 FW-1044 228 FW-1045 228 FW-1046 228 FW-1047 228 FW-1048 229 FW-1049 229 FW-1050 229 FW-1051 230 FW-1052 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 24
FW-1130 236 FW-1131 236 FW-1132 237 FW-1133 237 FW-1134 237 FW-1135 238 FW-1136 238 FW-1137 238 FW-1138 238 FW-1139 239 FW-1140 239 FW-1160 239 FW-1161 240 FW-1162 240 FW-1163 240 FW-1164 241 FW-1165 241 FW-1166 241 FW-1167 242 FW-1168 242 FW-1169 242 FW-1170 243 FW-1171 243 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 25
Fabric OS Message Reference 53-1001157-01 FW-1186 248 FW-1187 248 FW-1188 248 FW-1189 248 FW-1190 249 FW-1191 249 FW-1192 249 FW-1193 250 FW-1194 250 FW-1195 250 FW-1196 251 FW-1197 251 FW-1198 251 FW-1198 251 FW-1216 252 FW-1217 252 FW-1218 253 FW-1219 253 FW-1240 253 FW-1241 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 26
FW-1299 259 FW-1300 260 FW-1301 260 FW-1302 260 FW-1303 261 FW-1304 261 FW-1305 261 FW-1306 262 FW-1307 262 FW-1308 262 FW-1309 263 FW-1310 263 FW-1311 263 FW-1312 264 FW-1313 264 FW-1314 264 FW-1315 265 FW-1316 265 FW-1317 265 FW-1318 266 FW-1319 266 FW-1320 266 FW-1321 267 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 27
Fabric OS Message Reference 53-1001157-01 FW-1336 272 FW-1337 272 FW-1338 272 FW-1339 273 FW-1340 273 FW-1341 273 FW-1342 274 FW-1343 274 FW-1344 274 FW-1345 275 FW-1346 275 FW-1347 275 FW-1348 276 FW-1349 276 FW-1350 276 FW-1351 277 FW-1352 277 FW-1353 278 FW-1354 278 FW-1355 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 28
FW-1373 284 FW-1374 285 FW-1375 285 FW-1376 285 FW-1377 286 FW-1378 286 FW-1379 286 FW-1400 287 FW-1401 287 FW-1402 287 FW-1403 288 FW-1424 288 FW-1425 288 FW-1426 288 FW-1427 289 FW-1428 289 FW-1429 289 FW-1430 290 FW-1431 290 FW-1432 290 FW-1433 290 FW-1434 291 FW-1435 291 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 29
Chapter 36 HAM System Messages HAM-1001 297 HAM-1002 297 HAM-1004 297 HAM-1005 298 HAM-1006 298 HAM-1007 299 HAM-1008 299 HAM-1009 299 Chapter 37 HAMK System Messages HAMK-1001 301 HAMK-1002 301 HAMK-1003 301 HAMK-1004 302 Chapter 38 HIL System Messages HIL-1101 303 HIL-1102 303 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 30
HIL-1306 309 HIL-1307 309 HIL-1308 309 HIL-1309 310 HIL-1310 310 HIL-1311 310 HIL-1401 310 HIL-1402 311 HIL-1403 311 HIL-1404 311 HIL-1501 311 HIL-1502 312 HIL-1503 312 HIL-1504 312 HIL-1505 313 HIL-1506 313 HIL-1507 313 HIL-1508 314 HIL-1509 314 HIL-1510 314 HIL-1601 315 HIL- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 31
-1007 328 ICPD-1008 328 Chapter 45 IPAD System Messages IPAD-1000 331 IPAD-1001 331 Chapter 46 IPS System Messages IPS-1001 333 IPS-1002 333 IPS-1003 333 IPS-1004 333 IPS-1005 334 IPS-1006 334 Chapter 47 ISCS System Messages ISCS-1000 335 Chapter 48 ISNS System Messages ISNS-1001 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 32
ISNS-1005 338 ISNS-1006 338 ISNS-1008 338 ISNS-1009 339 ISNS-1010 339 ISNS-1011 339 ISNS-1013 339 ISNS-1014 340 Chapter 49 KAC System Messages KAC-1002 341 KAC-1004 341 KAC-1006 341 KAC-1007 341 KAC-1008 342 Chapter 50 KSWD System Messages KSWD-1001 343 KSWD-1002 343 KSWD-1003 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 33
LOG-1001 349 LOG-1002 349 LOG-1003 350 Chapter 54 LSDB System Messages LSDB-1001 351 LSDB-1002 351 LSDB-1003 351 LSDB-1004 352 Chapter 55 MFIC System Messages MFIC-1001 353 MFIC-1002 353 MFIC-1003 353 Chapter 56 MPTH System Messages MPTH-1001 355 MPTH-1002 355 MPTH-1003 355 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 34
Chapter 59 NBFS System Messages NBFS-1001 365 NBFS-1002 365 NBFS-1003 366 Chapter 60 NS System Messages NS-1001 367 NS-1002 367 NS-1003 367 NS-1004 368 NS-1005 368 NS-1006 368 Chapter 61 PDM System Messages PDM-1001 369 PDM-1002 369 PDM-1003 369 PDM-1004 370 PDM-1005 370 PDM-1006 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 35
-1004 381 PMGR-1005 382 PMGR-1006 382 PMGR-1007 382 PMGR-1008 382 PMGR-1009 383 PMGR-1010 383 Chapter 65 PORT System Messages PORT-1003 385 PORT-1004 385 PORT-1005 385 Chapter 66 PS System Messages PS-1000 387 PS-1001 387 PS-1002 387 PS-1003 387 PS-1004 388 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 36
Chapter 68 RAS System Messages RAS-1001 391 RAS-1002 391 RAS-1004 391 RAS-1005 391 RAS-1006 392 RAS-2001 392 RAS-2002 392 RAS-2003 392 RAS-3001 393 RAS-3002 393 RAS-3003 393 RAS-3004 393 Chapter 69 RCS System Messages RCS-1001 395 RCS-1002 395 RCS-1003 395 RCS-1004 396 RCS-1005 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 37
Chapter 72 RTWR System Messages RTWR-1001 403 RTWR-1002 403 RTWR-1003 404 Chapter 73 SAS System Messages SAS-1001 405 Chapter 74 SCN System Messages SCN-1001 407 Chapter 75 SEC System Messages SEC-1001 409 SEC-1002 409 SEC-1003 410 SEC-1005 410 SEC-1006 410 SEC-1007 411 SEC-1008 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 38
xxxviii SEC-1042 417 SEC-1043 417 SEC-1044 417 SEC-1045 417 SEC-1046 418 SEC-1049 418 SEC-1050 418 SEC-1051 419 SEC-1052 419 SEC-1053 419 SEC-1054 420 SEC-1055 420 SEC-1056 420 SEC-1057 421 SEC-1059 421 SEC-1062 421 SEC-1063 421 SEC-1064 422 SEC-1065 422 SEC-1069 422 SEC-1071 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 39
Fabric OS Message Reference 53-1001157-01 SEC-1088 427 SEC-1089 427 SEC-1090 428 SEC-1091 428 SEC-1092 428 SEC-1093 428 SEC-1094 429 SEC-1095 429 SEC-1096 429 SEC-1097 430 SEC-1098 430 SEC-1099 430 SEC-1100 430 SEC-1101 431 SEC-1102 431 SEC-1104 431 SEC-1105 432 SEC-1106 432 SEC- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 40
SEC-1136 437 SEC-1137 438 SEC-1138 438 SEC-1139 438 SEC-1142 439 SEC-1145 439 SEC-1146 439 SEC-1153 440 SEC-1154 440 SEC-1155 440 SEC-1156 441 SEC-1157 441 SEC-1158 441 SEC-1159 442 SEC-1160 442 SEC-1163 442 SEC-1164 442 SEC-1165 443 SEC-1166 443 SEC-1167 443 SEC-1168 443 SEC- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 41
Fabric OS Message Reference 53-1001157-01 SEC-1189 448 SEC-1190 449 SEC-1191 449 SEC-1192 449 SEC-1193 449 SEC-1194 450 SEC-1195 450 SEC-1196 450 SEC-1197 451 SEC-1198 451 SEC-1199 451 SEC-1200 451 SEC-1201 452 SEC-1202 452 SEC-1203 452 SEC-1250 453 SEC-1251 453 SEC-1253 453 SEC- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 42
SEC-1319 459 SEC-1320 459 SEC-1321 459 SEC-1322 460 SEC-1323 460 SEC-1324 460 SEC-1325 460 SEC-1326 461 SEC-1327 461 SEC-1328 461 SEC-1329 462 SEC-1330 462 SEC-1331 462 SEC-1332 462 SEC-1333 463 SEC-3035 463 SEC-3036 463 SEC-3037 464 SEC-3038 464 SEC-3039 464 SEC-3050 464 SEC- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 43
SPC-2001 472 SPC-2002 472 SPC-2003 472 SPC-2004 472 SPC-2005 473 SPC-2006 473 SPC-2007 473 SPC-2008 473 SPC-2009 474 SPC-2010 474 SPC-2011 474 SPC-2012 474 SPC-3001 475 SPC-3002 475 SPC-3003 475 SPC-3004 475 SPC-3005 476 SPC-3006 476 SPC-3007 477 SPC-3008 477 SPC-3009 477 SPC- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 44
SPM-1009 483 SPM-1010 483 Chapter 79 SS System Messages SS-1000 485 SS-1001 485 SS-1002 485 SS-1003 486 Chapter 80 SULB System Messages SULB-1001 487 SULB-1002 487 SULB-1003 487 SULB-1004 488 SULB-1005 488 SULB-1006 488 SULB-1007 488 SULB-1008 489 SULB-1009 489 SULB-1010 495 SULB - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 45
SULB-1037 500 Chapter 81 SWCH System Messages SWCH-1001 501 SWCH-1002 501 SWCH-1003 501 SWCH-1004 502 SWCH-1005 502 SWCH-1006 502 SWCH-1007 502 SWCH-1008 503 SWCH-1009 503 SWCH-1010 503 SWCH-1011 504 Chapter 82 SYSC System Messages SYSC-1001 505 SYSC-1002 505 SYSC-1003 505 SYSC- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 46
TRCE-1004 512 TRCE-1005 512 TRCE-1006 512 TRCE-1007 513 TRCE-1008 513 TRCE-1009 513 TRCE-1010 513 TRCE-1011 514 TRCE-1012 514 Chapter 86 TRCK System Messages TRCK-1001 515 TRCK-1002 515 TRCK-1003 515 TRCK-1004 515 TRCK-1005 516 TRCK-1006 516 Chapter 87 TS System Messages TS-1001 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 47
WEBD-1002 525 WEBD-1004 525 WEBD-1005 525 WEBD-1006 526 WEBD-1007 526 WEBD-1008 526 Chapter 91 ZOLB System Messages ZOLB-1001 527 Chapter 92 ZONE System Messages ZONE-1002 529 ZONE-1003 529 ZONE-1004 529 ZONE-1005 530 ZONE-1006 530 ZONE-1007 531 ZONE-1008 531 ZONE-1010 531 ZONE- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 48
ZONE-1034 537 ZONE-1035 537 ZONE-1036 537 ZONE-1037 538 ZONE-1038 538 ZONE-1039 538 ZONE-1040 538 ZONE-1041 539 ZONE-1042 539 ZONE-1043 539 ZONE-1044 539 ZONE-1045 540 ZONE-1046 540 ZONE-1047 540 ZONE-1048 540 ZONE-1049 541 ZONE-1050 541 ZONE-1051 541 ZONE-1052 541 ZONE-1053 542 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 49
HTTP System Messages HTTP-1002 559 HTTP-1003 559 Chapter 96 AUDIT IPAD System Messages IPAD-1002 561 Chapter 97 AUDIT PORT System Messages PORT-1006 563 PORT-1007 563 PORT-1008 563 PORT-1009 563 Chapter 98 AUDIT SEC System Messages SEC-3001 565 SEC-3002 565 SEC-3003 565 SEC-3004 566 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 50
SEC-3012 568 SEC-3013 568 SEC-3014 569 SEC-3015 569 SEC-3016 569 SEC-3017 570 SEC-3018 570 SEC-3019 570 SEC-3020 570 SEC-3021 571 SEC-3022 571 SEC-3023 571 SEC-3024 572 SEC-3025 572 SEC-3026 572 SEC-3027 572 SEC-3028 573 SEC-3029 573 SEC-3030 573 SEC-3031 574 SEC-3032 574 SEC- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 51
SEC-3051 578 Chapter 99 AUDIT SNMP System Messages SNMP-1004 579 SNMP-1005 579 SNMP-1006 579 Chapter 100 AUDIT SULB System Messages SULB-1001 581 SULB-1002 581 SULB-1003 581 SULB-1004 582 SULB-1009 582 SULB-1010 588 SULB-1017 588 SULB-1018 588 SULB-1020 589 SULB-1021 589 SULB-1023 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 52
UCST-1024 596 UCST-1025 596 UCST-1026 596 UCST-1027 596 Chapter 103 AUDIT ZONE System Messages ZONE-3001 599 ZONE-3002 599 ZONE-3003 599 ZONE-3004 600 ZONE-3005 600 ZONE-3006 600 ZONE-3007 601 ZONE-3008 601 ZONE-3009 601 ZONE-3010 601 ZONE-3011 602 ZONE-3012 602 ZONE-3013 602 ZONE- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 53
procedures documented here apply to some switches but not to others, this guide identifies exactly which switches are supported and which are not. Although many different software and hardware configurations are tested and supported by Brocade Communications Systems, Inc. for 5.3.0, documenting all - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 54
• Brocade 4018 switch • Brocade 4020 switch • Brocade 4024 switch • Brocade 4100 switch • Brocade 4900 switch • Brocade 5000 switch • Brocade 5100 switch • Brocade 5300 switch • Brocade 7500 Extension Switch • Brocade 7500E Extension Switch • Brocade 7600 switch • Brocade 48000 director • Brocade - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 55
about new features and documentation updates for this release, refer the names of user-manipulated GUI elements Identifies and Internet addresses Identifies document portions of this guide are presented in mixed syntax conventions Command syntax in this manual follows these conventions: command -- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 56
this manual. They to hardware, firmware, software, or user ID and password. For practical discussions about SAN design, implementation, and maintenance, you can obtain Building SANs with Brocade Fabric Switches through: http://www.amazon.com For additional Brocade documentation, visit the Brocade - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 57
on the Brocade Connect Web site and are also bundled with the Fabric OS firmware. Other industry resources For information about the Fibre Channel industry, visit the Fibre Channel Industry Association Web site: http://www.fibrechannel.org Getting technical help Contact your switch support supplier - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 58
the port side of the chassis, directly above the cable management comb. 3. World Wide Name (WWN) Use the wwn command to display the switch WWN. • If you cannot use the wwn command because the switch is inoperable, you can get the WWN from the same place as the serial number, except for the Brocade - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 59
and Configuring System Message Logs 4 •Reading a RAS System Message 8 •Responding to a System Message 11 •System Module Descriptions 13 Overview of System Messages This guide supports Fabric OS v6.2.0 and documents system messages that can help you diagnose and fix problems with a switch or - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 60
for more information. Event Auditing Event auditing is designed to support post-event audits and problem determination based on high-frequency events of certain types such as security violations, zoning configuration changes, firmware downloads, and certain types of fabric events. Fabric OS versions - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 61
running UNIX, Linux, or any other operating system that supports the standard syslogd functionality. Configuring for syslogd involves configuring the host, enabling syslogd on the Brocade model, and, optionally, setting the facility level. For the Brocade DCX, 24000 and 48000, each CP has a unique - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 62
the Fabric OS Administrator's Guide for information on interpreting results of the portLogDump command. Port log functionality is completely separate from the system message log. Port logs are typically used to troubleshoot device connections. Viewing and Configuring System Message Logs This section - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 63
portLogEventShow command. portLogTypeEnable Enables an event to report to the port log. Port log events are described by the portLogEventShow command. setVerbose Sets the verbose level of a particular module within the Fabric OS. supportFtp Sets, clears, or displays support FTP parameters or - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 64
service provider to diagnose and correct problems with the switch. The output from this command is very long. syslogDIpAdd Adds an IP address as a recipient of system messages. syslogDIpRemove Removes an IP address as a recipient of system messages. syslogDIpShow Views the currently configured - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 65
, HA State out of sync Type to continue, Q to stop: 2004/07/28-17:04:51, [EM-1055], 3,, WARNING, switch, Media 27: Port media incompatible e. Reason: Configured port speed. Type to continue, Q to stop: Clearing the System Message Log To clear the system message log for a particular - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 66
Audit filter is enabled. 4. Configure up to six syslog servers to receive the audit events that will be generated through syslog (procedure will vary depending on server type). 5. Configure syslog on the switch to point to the configured servers' IP addresses. switch:admin> syslogdipadd 10.128 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 67
information of interest for post event auditing and problem determination. Audit event message format: AUDIT, , [], , , ////. /, , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 68
Telnet/CLI, Domain A/JohnsSwitch, , Incorrect password during login attempt. The fields in the the switch. The RASLog subsystem will support an internationalized timestamp format base on Configuration Firmware Fabric User ID The user ID. Role The role of the user ID. IP Address The IP address - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 69
are wide ranging and are to be used as general guidelines for troubleshooting. For all cases, you should look at each specific error message Problem 12 •Support 12 •Panic Dump and Core Dump Files 12 •Trace Dumps 13 •supportSave Command 13 Looking Up a System Message Error messages in this manual - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 70
the steps to produce the problem? - What configuration was in place when the problem occurred? 8. Did a failover occur? 9. Was security enabled? 10. Was POST enabled? 11. Are serial port (console) logs available? 12. Which CP was master? (only applicable to the Brocade DCX, 12000, 24000, or 48000 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 71
using fewer physical ports. Access Gateway mode transforms the Brocade 200E as well as embedded switches into a device management tool that is compatible with different types of fabrics, including Brocade-, Cisco-, and McDATA-based fabrics. Authentication error messages indicate problems with the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 72
the domain and alias lists to all switches in the fabric. Fabric OS system driver module. Firmware blade compatibility errors with control processor (CP). Fibre Channel over IP port configuration messages. Fibre Channel miscellaneous messages relate to problems with the physical layer used to send - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 73
the switch nondisruptively during failures and software upgrades. These facilities include version negotiation, state information transfer, and internal synchronization functions, enabling the transition from standby to active operation. FSS is defined both as a component and a service. A component - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 74
configurations not only switch wide, but also fabric wide. It keeps track iSCSI VT status and updates VT status to BP. System messages generated by the IP admin demon. Fibre Channel over IP license, tunneling, and port problems ) • Exchange Service Support daemon (essd Service daemon (tsd) • TRACE - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 75
been created. This message indicates hardware problems. A group of messages relating to logical switch creation, deletion and configuration. PORT error messages refer to the front-end user ports on the switch. Front-end user ports are directly accessible by users to connect end devices or connect - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 76
agent). It also allows the switch to send traps to the defined and configured management station. Brocade switches support six management entities that can be configured to receive these traps. SPC messages indicate problems and informational updates associated with the security processor. These - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 77
log. Additionally, if the SNMP trap option is enabled, an SNMP trap is also sent. For information on configuring the track change feature, refer to the Fabric OS Command Reference or the Fabric OS Administrator's Guide. Time Service provides fabric time-synchronization by synchronizing all clocks in - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 78
1 System Module Descriptions 20 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 79
RASLog Messages Section I This section provides the RASLog messages, including: •AG System Messages 25 •AUTH System Messages 33 •BKSW System Messages 47 •BL System Messages 49 •BLL System Messages 63 •BM System Messages 65 •C2 System Messages 71 •CDR System Messages 73 •CER System Messages - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 80
Messages 325 •ICPD System Messages 327 •IPAD System Messages 331 •IPS System Messages 333 •ISCS System Messages 335 •ISNS System Messages 337 System Messages 377 •PLAT System Messages 379 •PMGR System Messages 381 •PORT System Messages 385 •PS System Messages 387 •PSWP System Messages 389 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 81
•RTWR System Messages 403 •SAS System Messages 405 •SCN System Messages 407 •SEC System Messages 409 •SNMP System Messages 467 •SPC System Messages 471 •SPM System Messages 481 •SS System Messages 485 •SULB System Messages 487 •SWCH System Messages 501 •SYSC System Messages 505 •SYSM - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 82
- HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 83
. • Some blades and ports in a switch may not support NPIV. NPIV functionality can not be enabled on such ports and they will not respond to NPIV requests. Refer to the Access Gateway Administrator Guide, Appendix B, for specific AG-compatibility requirements. • On non-Brocade switches, refer to the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 84
login (FLOGI) request from the fabric for N_Port . Probable Cause Indicates the fabric sent an invalid response to the FLOGI Extended Link Service (ELS) for the specified N_Port. Recommended Action Check the configuration of the fabric switch. If the message persists, run supportFtp (as - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 85
) response from the fabric on the N_Port . Probable Cause Indicates the fabric switch management server did not accept the N_Port Login (PLOGI) request sent by the Access Gateway. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 86
system-name>, Sending FDISC failed on N_Port . Probable Cause Indicates there was a failure sending discover F_Port service parameter request from the Access Gateway to the fabric switch. Recommended Action Check the configuration of the fabric switch connected to the Access Gateway. If the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 87
. Recommended Action Check whether or not any other N_Port is configured. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportsave command and contact your switch service provider. Severity WARNING AG-1016 Message , [AG-1016 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 88
, , Unable to failover N_Port . No other N Port in port group: is online. Probable Cause Indicates that failover across port groups is not supported. Recommended Check whether or not an alternate N_Port is configured in this port group. Action Severity WARNING AG-1020 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 89
and is online. Recommended Run the ag --mapshow command to display updated F_Port -to -N_Port mapping. Action Severity INFO AG-1024 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 90
resources. Recommended Action Run configure CLI on AG switch and increase the number of allowed logins on this port. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 91
has failed to update the secret database switch service provider. Severity ERROR AUTH-1003 Message , [AUTH-1003], ,, INFO, , type has been successfully set to . Probable Cause Indicates that an authentication configuration - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 92
run the supportSave command and contact your switch service provider. Severity ERROR AUTH-1006 Message , [AUTH-1006], ,, WARNING, , Failed to open authentication configuration file. Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 93
and contact your switch service provider. Severity ERROR AUTH-1011 Message , [AUTH-1011], ,, WARNING, , Failed to register for failover operation: switch error . Probable Cause Indicates an internal problem with the Secure - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 94
supportSave command and contact your switch service provider. Severity WARNING AUTH-1014 Message , [AUTH-1014], , FFDC, ERROR, , Invalid port value to : port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 95
the supportSave command and contact your switch service provider. Severity ERROR AUTH-1018 Message , [AUTH-1018], ,, ERROR, , Invalid value to check protocol type: port . Probable Cause Indicates an internal problem with the Secure Fabric OS - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 96
run the supportSave command and contact your switch service provider. Severity INFO AUTH-1022 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 97
payload for the specified authentication phase. This indicates that the local switch does not support the specified authentication value. Recommended Check the authentication configuration and reset the supported value if needed using the authUtil Action command. Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 98
your switch service provider. port number>, retval . Probable Cause Indicates that the authentication process failed to get a particular authentication value at certain phase. Data type is the payload or structure that failed to get memory. Recommended Action Usually this problem - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 99
replay attacks. Recommended Action Usually this problem is transient. The authentication might fail. switch service provider. Severity ERROR AUTH-1033 Message , [AUTH-1033], ,, ERROR, , Disable port due to unauthorized switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 100
configured in the switch connection control (SCC) policy and tried to connect to the port and contact your switch service provider. Severity ERROR port . Probable Cause Indicates that the switch received an unexpected authentication message. Recommended Action Usually this problem - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 101
>,, ERROR, , Neighboring switch has conflicting authentication policy: Port disabled. Indicates that the neighboring switch has a conflicting authentication policy enabled. The_E-Port has been disabled, because the neighboring switch rejected the authentication negotiation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 102
will form without authentication. Recommended Action If there is no light on the port, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch using the portEnable command. If the E_Port formed, no action is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 103
switch service defaulted to OFF, and switch problem may be transient due to the system's central processing unit (CPU) load. In addition, a defective small form-factor pluggable (SFP) or faulty cable may have caused the failure. Recommended Check the SFP and the cable. Then try to enable the port - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 104
3 AUTH-1044 46 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 105
is found, run supportFtp to send all core files to a secure server location. Copy the error message and any core file information, and contact your switch service provider. Severity WARNING Fabric OS Message Reference 47 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 106
4 BKSW-1003 48 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 107
Failed: slot DISABLED because internal ports were not ONLINE, . Probable Cause Indicates that have hardware problems. Note that any reference seen to slot 0 is a reference to the blade within the switch platform, e.g.,Brocade 7500 and AP7600 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 108
that blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Command specified blade experienced a failure but was not faulted due to a user setting. Recommended Action Reboot or power cycle the blade, using the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 109
CP is healthy. If the standby CP was removed Action or faulted by user intervention, no action is required. Severity INFO BL-1007 Message , [ the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 110
(SFP), or device attached to the specified port. Run the systemVerification command to verify that the blade or switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. On a bladed switch, run the slotPowerOff and slotPowerOn commands. On - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 111
system-name>, bport port int. is disabled. status=0x Port will be re-enabled in 1 minute. Probable Cause Indicates that the port generated an excessive number of interrupts that might prove unrecoverable to the switch operation. The port is disabled to - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 112
. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If there is a hardware error, if the slotPowerOff or slotPowerOn fails on the bladed switch or if errors are encountered again: • On the Brocade DCX, 24000, and 48000, replace the blade field-replaceable unit (FRU). • On - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 113
blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the Fabric OS Initializing... Probable Cause Indicates that the slot has started initializing the ports. Recommended No action is required. Action Severity INFO BL-1018 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 114
of the internal ports was not online. The switch is faulted. Recommended Action Reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. Refer to the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 115
Virtualization ports on the blade in slot will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the blade's firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all GigE/Fibre Channel over IP (FCIP - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 116
is enabled. If problem persists, replace switch. ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 117
/FC Fastwrite ports on the switch will be reset as part of the firmware upgrade. Probable Cause Indicates that a recent firmware upgrade caused the switch's internal processor firmware to be upgraded and resulted in the cold upgrade. As part of the upgrade, all the GigE/Fibre Channel over IP (FCIP - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 118
messages from the user ports after disabling the ports. Recommended Action Reboot or power cycle the blade. Run the systemVerification command to verify that the blade does not have hardware problems. Run the diagPost command to ensure that Power-On Self-Test (POST) is enabled. If the message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 119
-number>,, CRITICAL, , Faulting chip in slot = , miniS = ,port = due to BE/BI port fault. Probable Cause Fault the chip and disable all the ports on that chip. Recommended No action is required. Action Severity CRITICAL Fabric OS Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 120
5 BL-1037 62 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 121
slot number> port as faulty (reason: ) Probable Cause Indicates a blade regulation problem was reported on suspended • 15 = Filter LISTD error • 16 = Unknown filter LIST error • 17 = Wait for LPC open state • 18 = Wait for Old port state • 19 = Wait for Open init state - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 122
6 BLL-1000 If the message persists, replace the blade. Severity CRITICAL 64 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 123
The problem can be corrected by changing the firmware version on either the firmware download is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP blade. If needed, send the AP blade back to the factory for a firmware update - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 124
be different from the control processor (CP) firmware due to a firmware upgrade. • The blade was just inserted and had a different version of the firmware loaded. Recommended No action is required. The blade will automatically download the updated firmware. Action Severity INFO BM-1005 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 125
blade requires the specified port configurations to be cleared. The blade ports are cleared automatically. Recommended No action is required. Action Severity INFO BM-1008 Message , [BM-1008], ,, WARNING, , Download of blade firmware failed for blade in - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 126
processor to communicate. Recommended On the Brocade 7500 or 7600, switch off and on all primary power firmware due to a firmware upgrade • The blade was just inserted and had a different firmware loaded Recommended No action is required. The blade will automatically download the updated firmware - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 127
on this switch. • The switch was configured under a different mode. Recommended Configure the switch to persistently enable all ports. Action Severity INFO BM-1058 Message , [BM-1058], ,, WARNING, , Download of AP firmware failed for the switch. Reissue - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 128
7 BM-1058 70 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 129
C2 System Messages Chapter 8 C2-1001 Message , [C2-1001], ,, ERROR, , Port port fault (the configured speed may not be supported by the SFP). Please change the SFP or check the cable. Probable Cause Indicates a deteriorated SFP, an - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 130
Message , [C2-1005], ,, ERROR, , Rate limit configuration is not effective on S() user port because QoS license is not present. Probable Cause Indicates that the switch does not have the QoS license added. Rate Limit is a licensed - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 131
(SFP), an incompatible SFP pair, a faulty cable between peer ports, or the port speed configuration does not match the capability of the SFP. Recommended Action Verify system at the next maintenance window. If the problem Action persists, replace the blade. Fabric OS Message Reference 73 53-1001157 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 132
>, bad_addr:0x. Probable Cause Indicates an internal error in the application specific integrated circuit (ASIC) hardware that may degrade data traffic. Recommended Whenever this error occurs, reboot the system at the next maintenance window. If the problem Action persists, replace - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 133
loaded on the standby CP. The standby CP does not support the Advanced Performance Tuning module when the fibre connectivity (FICON) Management Server is enabled. Recommended Action Run the firmwareDownload command to upgrade the firmware on the standby CP. You can also disable FMS on the active - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 134
10 CER-1001 76 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 135
, Slot ENABLED but Not Ready during recovery, disabling slot = rval = . Probable Cause Indicates that the slot state has been detected as inconsistent during failover or recovery. Recommended On a Brocade 24000 or 48000 switch, run the slotPowerOff command - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 136
Indicates that the Diag blade attach has failed during failover or recovery. Recommended Action On a Brocade 24000 or 48000 switch, run the slotPowerOff command followed by the slotPowerOn command. On a Brocade 200E, 3250, 3850, 3900, 4012, 4016, 4018, 4020, 4024, 4100, 4900, 5000, 7500, or AP7600 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 137
Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference Manual for more information on this command. Severity ERROR CNM-1003 Message , [CNM-1003], ,, WARNING, , Crypto device configuration - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 138
12 CNM-1005 Probable Cause Indicates that the Crypto service is enabled or disabled on the switch. Recommended No action is required. Action Severity INFO CNM-1005 Message , [CNM-1005], ,, INFO, , Posting event CNM_EVT_GRP_LEADER_ELECTED Name [ - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 139
-number>,, INFO, , Posting event CNM_EVT_CLUSTER_UDATA_UPDATE cid [], ulen []. Probable Cause Indicates the client data update. Recommended No action is required. Action Severity INFO CNM-1011 Message , [CNM-1011], ,, INFO, - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 140
12 CNM-1013 Recommended No action is required. Action Severity INFO CNM-1013 Message , [CNM-1013], ,, INFO, ,Posting event GL Node Split condition, isolating peer GL node . Probable Cause Indicates that the encryption group (EG) is split. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 141
INFO CNM-1017 Message , [CNM-1017], ,, INFO, ,Got JOIN REQUEST from un-recognized GL node [], configured GL node is []. Probable Cause Indicates a join request was received from an invalid group leader (GL) node. Recommended No action - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 142
12 CNM-1021 Probable Cause Indicates Node Admission Control failed. Recommended No action is required. Action Severity INFO CNM-1021 Message , [CNM-1021], ,, INFO, , Failed to sign the node authentication message, admission control might fail. Probable - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 143
-1026], ,, INFO, , Received HBT Message with version mismatch, Received Hdr version Expected Hdr version Upgrade the firmware or delete the Node [] from the EG. Probable Cause Indicates an operation is not required. Recommended No action is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 144
12 CNM-1029 Probable Cause Indicates that the certificate file for the node already exists. Recommended No action is required. Action Severity INFO CNM-1029 Message , [CNM-1029], ,, INFO, , Certfile content does not match the cert sent by GL. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 145
12 CNM-1033 Probable Cause Indicates that there is a size mismatch between a node's certificate file and the certificate file received from the group leader. Recommended No action is required. Action Severity INFO CNM-1033 Message , [CNM-1033], ,, INFO, , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 146
12 CNM-1037 Probable Cause Indicates an event is being posted to indicate the cluster is in a converged state. Recommended No action is required. Action Severity INFO CNM-1037 Message , [CNM-1037], ,, INFO, , Split-Brain Arbitration lost!, minority GL - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 147
Indicates the update of the persistent database is complete. Recommended No action is required. Action Severity INFO CNM-1043 Message , [CNM-1043], ,, INFO, , Received HBT from undefined node IpAddress [], WWN []. Possible configuration error - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 148
12 CNM-1044 Recommended No action is required. Action Severity INFO 90 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 149
and completed successfully. The statement that follows, message strings, is the description of the classes of configuration parameters that were downloaded. If Admin Domain (AD) is enabled, the AD number is specified in the description. Recommended No action is required. Action Severity INFO - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 150
, [CONF-1022], ,, INFO, , Downloading configuration without disabling the switch was unsuccessful. Probable Cause Indicates an attempt to download the configuration without disabling the switch was unsuccessful because there are one or more parameters that - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 151
Chapter CTAP System Messages 14 CTAP-1001 Message , [CTAP-1001], ,, INFO, , Key acquisition for . Probable Cause Indicates that a change in the tape pool database has triggered the key acquisition process for each - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 152
14 CTAP-1001 94 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 153
, Initiator: , LUN ID: . Probable Cause Indicates the First time encryption, Key expired or Manual re-key operation is performed. The operation has been started, completed or cancelled. Recommended No action is required. Action Severity INFO - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 154
15 CVLC-1004 CVLC-1004 Message , [CVLC-1004], ,, INFO, , Forceful encryption LUN removal while re-key session is still active.\nContainer: , Initiator: , LUN ID: . Probable Cause Indicates that the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 155
physical WWN>, LUN ID: . Probable Cause Indicates that the encryption LUN is configured with non-Brocade mode but there is no valid license. Recommended Obtain license for non-Brocade mode. Action Severity ERROR CVLC-1012 Message Probable Cause , [CVLC-1012], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 156
that the encryption engine is unable to retrieve the key record base on the key ID found in the metadata. Recommended No user input.\nContainer: , Initiator: , LUN ID: . Probable Cause Indicates that the data state in the LUN configuration - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 157
is clear text.\nContainer: , Initiator: , LUN ID: . Probable Cause Indicates that the data state in the LUN configuration is in clear text state but metadata exists on the LUN. Recommended Use cryptocfg command to confirm the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 158
exists on the LUN that is clear text. Recommended Use cryptocfg command to confirm the configuration. Action Severity ERROR CVLC-1021 Message , [CVLC-1021], ,, INFO, , User provided key ID is ignored while metadata - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 159
Download a new firmware version using the firmwareDownload command. Refer to the Fabric OS Action Command Reference Manual for more information on this command. Severity ERROR CVLM-1003 Message , [CVLM-1003], ,, INFO, , Crypto device configuration - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 160
Fabric OS Command Reference Manual for more information on this command. Severity WARNING CVLM-1005 Message , [CVLM-1005], ,, INFO, , Crypto service is on the switch. Probable Cause Indicates that the Crypto service is enabled or disabled on the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 161
16 CVLM-1009 Probable Cause Indicates that the member of HAC is not in the fabric. Recommended Check the ISL port connected to the configured. Probable Cause Indicates that the encryption engine IO link IP address is not configured. Recommended Configure the encryption engine IO link IP address - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 162
16 CVLM-1012 Recommended No action is required. Action Severity INFO 104 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 163
operational range of the switch. Refer to the hardware reference manual for the environmental temperature range of your switch. Run the fanShow faulted. Recommended Action On Brocade 24000 and 48000, try reseating the specified FRU. Reboot or power cycle the switch. Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 164
switch does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. On the Brocade 24000 and 48000, replace the specified FRU. For the Brocade unit, slot, or port. The Brocade 3250 has one power supply and three fans, and the Brocade 3850 has two - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 165
switch for nonbladed switches. Recommended Action There is most likely a voltage hardware problem on the blade or motherboard of the switch. For the Brocade type. If the incompatibility is with the logical switch configuration, change the configuration with the lscfg command to be consistent with - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 166
Action Try reseating the FRU. If the message persists, replace the FRU. Refer to the Brocade 48000 Hardware Reference Manual for more information about chassisConfig modes and supported blades. Severity CRITICAL EM-1010 Message , [EM-1010], , FFDC, CRITICAL, - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 167
There are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Action On Brocade DCX, 24000 and 48000, try If you ran the fruInfoSet command, try the command again; otherwise, the update is automatically attempted again. If it continues to fail, try reseating the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 168
problem was discovered when performing consistency checks during a cold boot. Recommended Action Monitor the switch command and contact your switch service provider. Severity WARNING EM configuration option () is not compatible with standby firmware - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 169
supported by the firmware on chassisConfig command, or upgrade the Action firmware on the standby to problem. The FRU ID value is composed of a FRU type string and an optional number to identify the unit, slot, or port. Recommended Action If the message persists, reboot or power cycle the switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 170
port blade) if the field-replaceable unit (FRU) is intended for use. Refer to the appropriate hardware manual for instructions on inserting the switch FRU. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS Command Reference for - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 171
wide name (WWN) card, then default WWN and IP addresses are used for the switch. Recommended Action Reseat the FRU card. If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 172
voltages in volts • temperature in Celsius • fan speeds in RPM Recommended If the message is isolated, monitor the error messages on the switch. If the message is associated Action with other messages, follow the recommended action for those messages. Severity WARNING EM-1042 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 173
(CP256) is not supported on that chassis (backplane revision D2), remove the blade from the chassis. If the reason is switch configuration, the blade's Logical switch configuration is not correct. Run lscfg command to correct the switch or port configuration for the ports on that blade. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 174
access to the field-replaceable unit (FRU) has become available again. Recommended The EM-1029 error can be a transitory error; if the problem resolves, the EM-1048 message is Action displayed. Severity INFO EM-1049 Message , [EM-1049], ,, INFO, , FRU - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 175
can be run at the configured port speed. If the port media is extended long wavelength, move it to a port that can support the heat generated. Severity a faulty port media is detected. The reason code for this message is for internal use only. This message is valid for only the Brocade 4100, 4900 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 176
in the specified slot or the switch (for nonbladed switches) is not compatible with the switch configuration software. The system may not be system is not supported by the release on the standby control processor (CP). Recommended Action Remove all blades of this type or upgrade your standby CP. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 177
the system is not supported by the release on the standby control processor (CP). Recommended Action Remove all blades of this type or upgrade your standby CP. , Blade: is being powered off (based on user configuration) upon receiving a HW ASIC ERROR, reason:. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 178
problem blade when such a condition occurred. Recommended Contact support. Action Severity CRITICAL EM-1065 Message , [EM-1065], ,, CRITICAL, , SSAS Virtualization Services or Storage Application Services (SAS) firmware has been upgraded and is now - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 179
There are serious internal Fabric OS configuration or hardware problems on the switch. Recommended Reboot or power cycle the switch. If the message persists, collect switch information using the Action supportsave command, and contact your switch service provider. Severity ERROR EM-1069 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 180
, try reseating the specified FRU. On nonbladed switches, reboot or power cycle the switch. If the problem persists: • Run the systemverification command to verify that the switch does not have hardware problems. Refer to theFabric OS Reference Manual for more information on this command. • On - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 181
Action Discontinue the firmware download, identify the downlevel switch or switches that do not support the Coordinated HotCode protocol, and upgrade the downlevel switches. Then, restart the firmware download on this switch. Note that upgrading a downlevel Brocade switch in a mixed interop - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 182
domain id>. Probable Cause Indicates that during the Coordinated HotCode protocol, a switch in the fabric has rejected the resume message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to the rejected resume message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 183
EVMD System Messages 19 EVMD-1001 Message , [EVMD-1001], ,, WARNING, , Event could not be sent to remote proxy. = Probable Cause Indicates the event could not be sent to remote proxy. This could happen if the remote proxy - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 184
19 EVMD-1001 126 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 185
], ,, WARNING, , port , . Probable Cause Indicates that the specified switch port is isolated because of a segmentation resulting from mismatched configuration parameters. Recommended Action Based on the segmentation reason displayed - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 186
switch service provider. Severity WARNING FABR-1004 Message , [FABR-1004], ,, WARNING, , port: , req iu: 0x - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 187
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FABR-1007 Message , [FABR-1007], information unit. This message is rare and usually indicates a problem with the Fabric OS. Recommended Action In case of severe - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 188
message is rare and usually indicates a problem with the Fabric OS. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING FABR-1011 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 189
has a different domain ID, then the port is disabled. Recommended Action Run the configShow command to view the fabric.ididmode. A 0 means the IDID mode is disabled; a 1 means it is enabled. Set the switch to insistent domain ID mode. This mode is set under the configure command or in Web Tools on - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 190
system-name>, ficonMode is enabled. Probable Cause Indicates that FICON mode is enabled on the switch through a user interface command. Recommended No name>, Critical fabric size () exceeds supported configuration (). 132 Fabric OS Message Reference 53- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 191
licensed limit. Contact your switch provider to obtain a full fabric license. Severity CRITICAL FABR-1022 Message , [FABR-1022], , FFDC, CRITICAL, , Fabric size () exceeds supported configuration (). Fabric limit timer - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 192
switch provider to obtain a full fabric license. Severity CRITICAL FABR-1023 Message , [FABR-1023], ,, INFO, , Fabric size is within supported configuration sequence-number>,, INFO, , Port negotiated - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 193
modes, the buffer credits are fixed, based on the port configuration information. In this mode, the port exceeded. Probable Cause Indicates the fabric exhausted the maximum number of retries sending internal link service WARNING, , Remote switch with domain ID - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 194
to match with the same Master Trunk Area, or disable Trunk Area. You must manually enable the port or the port remains disabled forever. Refer to the Admin Guide for more information. Severity INFO FABR-1036 Message , [FABR-1036], , INFO, , F_port trunks - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 195
is being disabled because when the port attempts to go online, the Switch finds that Trunk Area enabled is incompatible with port configuration such as long distance, port mirror, fast write or EX_port. Recommended Check the port configuration to disable long distance, port mirror, fast write or - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 196
ID conflict with the local switch. But no ports are disabled because the remote switch is not adjacent to the local switch. Recommended Make sure that all the switches in the fabric have the same Fabric ID or upgrade the switch Action firmware to a VF-capable firmware. Severity ERROR FABR-1044 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 197
that the remote switch has a Base Switch attribute conflict with the local switch. All the E_ports directly connected to the conflicting switch are disabled. Recommended Make sure that all the switches in the fabric have the same Base Switch attribute or upgrade the Action switch firmware to a VF - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 198
20 FABR-1046 140 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 199
by the software. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1004 Message , [FABS-1004], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 200
an invalid value in an object's status field. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. 142 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 201
unknown event type. This is usually an internal Fabric OS problem or file corruption. Recommended Action Reboot or power cycle the switch. If the message persists, run the firmwareDownload command to update the firmware. Severity WARNING FABS-1011 Message Probable Cause , [FABS-1011 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 202
problem. Recommended Action Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware inability to read the FRU header, or the blade may not be supported by this platform or Fabric OS version. Recommended Action Verify that the blade - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 203
specified FRU could not be enabled. This is usually an internal Fabric OS problem. Recommended Action Try removing and reinserting the FRU. Reboot or power-cycle the CP or system. If the message persists, run the firmwareDownload command to update the firmware. Severity ERROR Fabric OS Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 204
21 FABS-1015 146 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 205
a non-disruptive firmwareDownload is supported between the versions. As the AP and CP blades cannot communicate, it is not possible to load new firmware on the AP blade. If required, send the AP blade back to the factory to get a new firmware version installed. Severity ERROR Fabric OS Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 206
22 FBC-1001 148 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 207
, of GE failed. Please retry the command. Data: occured and requires faulting the blade or switch. Recommended Retry the command again. Action /IKE policy was added and the config file was updated. Recommended No action is required. Action Severity INFO - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 208
Tape Read Pipelining is being disabled slot () port () tunnel (). Probable Cause Indicates that the FOS version on the remote end of the tunnel does not support Tape Read Pipelining. Recommended No action is required. Action Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 209
Chapter FCMC System Messages 24 FCMC-1001 Message , [FCMC-1001], , FFDC, CRITICAL, , System is low on memory and has failed to allocate new memory. Probable Cause Indicates that the switch is low on memory and failed to allocate new memory for an - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 210
24 FCMC-1001 152 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 211
failed on which is possibly a private device which is not supported in this port type Probable Cause Indicates that private devices will not respond to the switch port login (PLOGI) during probing. Recommended Action The Brocade DCX, 4100, 4900, 5000, 7500, and AP 7600 do not - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 212
25 FCPD-1003 154 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 213
policy is set to ON. Probable Cause Indicates a device which does not support authentication has tried to log in to the switch when the device authentication policy is in ON status on the switch. Recommended Action Enable the authentication on the device or set the device authentication status to - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 214
26 FCPH-1002 156 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 215
action is required. Action Severity INFO FCR-1003 Message , [FCR-1003], ,, INFO, ,FC router physical devices newly exported at port . Probable Cause Indicates that one or more physical devices have been newly exported through the specified - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 216
. Action Severity INFO FCR-1006 Message , [FCR-1006], ,, INFO, , FC router LSAN zone device added at port . Probable Cause Indicates that a device is added to a logical storage area network (LSAN) zone in the edge fabric. Recommended No - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 217
, FC router LSAN zone enabled at port : . Probable Cause Indicates that a logical storage area network (LSAN) zone was enabled in the edge fabric attached to the specified port. The enabled LSAN zone configuration is listed. Recommended No action is required - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 218
id () fabric ID . Probable Cause Indicates that a fabric is no longer accessible through the backbone fabric. This may be caused by a link or switch failure. Recommended No action is required. Action Severity INFO 160 Fabric OS Message Reference 53 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 219
. Use the fcrProxyDevShow command to view how many proxy devices are created in the fabric with the port resource problem. LSAN zones are removed using standard zoning commands such as zoneShow, zoneRemove, zoneDelete, cfgDelete, and cfgDisable in the edge fabric. Proxy devices can be removed - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 220
of translate domains). You can also limit the number of proxy devices for a translate domain (which limits the number of translate domain ports required) by limiting the devices specified in logical storage area network (LSAN) zones. Severity WARNING 162 Fabric OS Message Reference 53-1001157 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 221
It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch is deployed in a very large MetaSAN environment with large number of logical storage area >,, INFO, , In slot port WWN roll over. Fabric OS Message Reference 163 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 222
port world wide name (WWN) pool has rolled over in the specified slot, and WWN entries detected to not be in use are reused as needed. Recommended Action It is unlikely that WWN conflicts will occur as a result of pool rollover unless the switch be disabled then re-enabled. Severity INFO FCR-1028 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 223
No action is required. Action Severity INFO FCR-1032 Message , [FCR-1032], ,, INFO, , Edge fabric enabled security on port in fabric . Probable Cause Indicates that Secure mode was turned on in the edge fabric. Recommended No - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 224
in the backbone fabric. Probable Cause Indicates that the specified logical storage area network (LSAN) zone was enabled in the backbone fabric. The enabled LSAN zone configuration is listed. Recommended No action is required. Action Severity INFO FCR-1037 Message , [FCR-1037 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 225
: . Probable Cause Indicates that the number of cfg/zone/alias entries created in a local fabric is greater than the local switch's zone database limitations. Recommended Remove excess cfg/zone/alias entries so that the number of logical storage area network (LSAN) Action zones - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 226
type was not set. Recommended Action Setting port credits failed. Execute the portEnable command. If the problem persists try rebooting the switch. If the message persists, collect switch information using the supportShow command, and contact your switch service provider. Severity ERROR FCR-1049 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 227
the portEnable and portDisable commands to enable and disable the port. If the problem persists contact your switch service provider. Severity ERROR FCR-1053 Message , [FCR-1053], ,, WARNING, , Port was disabled, . Probable - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 228
the switch with Action one that supports backbone to edge routing. Severity INFO FCR-1057 Message , [FCR-1057], ,, ERROR, , EX_Port() incompatible long distance parameters on link. Probable Cause Indicates that the port, which is configured - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 229
, [FCR-1060], ,, WARNING, , EX_Port() has an incompatible configuration setting. Probable Cause Indicates that virtual channel (VC) Link Init is enabled on the local switch and the remote switch is negotiating in R_RDY mode. The fabric might not - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 230
of supported EX_ports or VEX_ports was exceeded. To enable the specified port, disable any other operational port then re-enable the port. ID>. Probable Cause Indicates that the fabric ID of the switch does not match the local switch. Recommended Run the switchShow command to display the fabric ID. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 231
manually re-enable the port. If there is another fabric with the same ID, change the fabric ID for the port using the portCfgExport or portCfgVExport commands. Severity ERROR FCR-1067 Message , [FCR-1067], ,, WARNING, , Zone configurations service is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 232
configuration is set to default by user. This removes all prior FC Routing configurations. Recommended No action is required. Action Severity INFO FCR-1071 Message , [FCR-1071], ,, INFO, , Port is changed from non FCR port to FCR port - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 233
is larger than characters in the edge fabric connected to port . Probable Cause Indicates that the zone name configuration size created in the connected fabric exceeds the maximum supported by the FC Router. This size is equal to the total number of characters - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 234
re-enable the port. Recommended Make sure to remain within the maximum of supported front domains. Action Severity ERROR FCR-1077 Message , [FCR-1077], ,, WARNING, , Port rejected fabric binding request/check from the M-Model switch; - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 235
the domain . Probable Cause During the Coordinated HotCode protocol, a switch in the fabric did not accept the pause message which prevented the protocol from completing. Any data traffic disruption observed during the firmware download may have been due to this issue. Recommended Action - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 236
the remote control processor (CP) has older firmware, which does not support FCRbased matrix while the local CP has the feature enabled. This is causing the loss of the high-availability (HA) synchronization. Recommended Disable FCR-based matrix or upgrade the remote CP. Action Severity ERROR FCR - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 237
Recommended Disable Condor2-based EX_ports or upgrade the remote CP to use XISL mode of the domain by using the configure command. Action Severity ERROR FCR-1088 Message , [ tag added. Probable Cause Indicates that the user has added a LSAN tag. Recommended No action is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 238
27 FCR-1089 180 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 239
the switch that the FICON Channel is directly connected to. HP - Host Port number: This is a 1 byte hexidecimal value that represents the switch port of the switch , FICON XRC Emulation License Key is not installed. Probable Cause Indicates FICON XRC Emulation requires a License Key - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 240
Block ID Emulation Enabled or Disabled>. Probable Cause Indicates the configuration was changed manually. Recommended No action is required. Action Severity INFO FICN-1006 Message , [FICN-1006], ,, WARNING, , FICON GEPort < 0 or 1 - GE port number> TID - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 241
to read the sense data. Recommended If there was a job failure associated with this event, please contact your vendor's customer support Action for assistance. Severity INFO FICN-1010 Message , [FICN-1010], ,, INFO, , DevDiskEgr:Device level exception - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 242
an LBY frame. Recommended If there was a job or IO failure associated with this event, please contact your vendor's customer Action support for assistance. Severity INFO FICN-1014 Message , [FICN-1014], ,, INFO, , DevEgr:Device level exception flag found - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 243
with an invalid LRC. This indicates data corruption between the emulation processing components. Recommended Please contact your vendor's customer support for assistance. Action Severity ERROR FICN-1016 Message , [FICN-1016], ,, INFO, , DevIng:Received - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 244
LRJ frame for a sequence from the device. Recommended If there was a job failure associated with this event, contact your vendor's customer support for Action assistance. Severity ERROR FICN-1020 Message , [FICN-1020], ,, ERROR, , DevTapeEgr:FICON Cancel - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 245
. Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's Action customer support for assistance. Severity ERROR FICN-1025 Message , [FICN-1025], ,, ERROR, , DevTapeIng:Auto Sense Data received - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 246
Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's Action customer support for assistance. Severity ERROR FICN-1029 Message Probable Cause , [FICN-1029], ,, ERROR, , HostDiskIng:FICON Selective - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 247
1030 Recommended If there was an unexpected job failure or IO Error associated with this event, contact your vendor's Action customer support for assistance. Severity ERROR FICN-1030 Message , [FICN-1030], ,, ERROR, , HostDiskIng:FICON Purge received:Path - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 248
peer. This indicates that the channel side noted corruption from the device/CU side processing. Recommended Contact your vendor's customer support for assistance. Action Severity ERROR FICN-1035 Message , [FICN-1035], ,, WARNING, , HostIng:FICON System - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 249
connected FICON channel sent a frame that could not be associated with a FICON Control Unit. Recommended Contact your vendor's customer support for assistance. Action Severity ERROR FICN-1040 Message , [FICN-1040], ,, ERROR, , HostTapeEgr:Tape:CmdReject - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 250
the CU has lost the logical path to the LPAR. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1042 Message , [FICN-1042], ,, WARNING, , HostTapeIng:FICON Cancel received Path - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 251
FICON channel. This is performed during the path recovery. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING FICN-1046 Message , [FICN-1046], ,, WARNING, , HostTapeIng:LRJ received - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 252
it no longer has an established path to its peer. Recommended This is an unexpected event; contact your vendor's customer support for assistance. Action Severity WARNING FICN-1050 Message , [FICN-1050], ,, WARNING, , ProcessEgrTirData:Lost Logical Path - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 253
to break an XRC session with the extended DASD device. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity INFO FICN-1053 Message , [FICN-1053], ,, INFO, , XRC Withdraw From Session: SessID - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 254
to break an XRC session with the extended DASD device. Recommended If this was an unexpected event, contact your vendor's customer support for assistance. Action Severity WARNING FICN-1056 Message , [FICN-1056], ,, ERROR, , FICON Emulation Error Error Code - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 255
This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1060 Message , Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR FICN-1062 Message , [ - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 256
=0x. Probable Cause Indicates an abort operation has been received from a local FC interface for an exchange. Recommended If there were associated IO errors at the same time as this event, contact your vendor's customer Action support for assistance. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 257
an error has been noted in the FICON configuration. Refer to the string for the nature of the configuration issue. Recommended If resolution of the configuration issue cannot be completed, contact your vendor's customer Action support for assistance. Severity ERROR Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 258
and not the unit check. If there are associated Action IO error messages with this event, please contact your vendor's customer support for assistance. Severity INFO FICN-1071 Message , [FICN-1071], ,, INFO, , HostTapeIngr:Tape Loaded on Path= - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 259
28 FICN-1074 Recommended No action is required. Action Severity INFO FICN-1074 Message , [FICN-1074], ,, INFO, , HostTapeIngr:WriteReport:Path=:Emuls=0x:Cmds=0x - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 260
28 FICN-1077 Recommended No action is required. Action Severity INFO FICN-1077 Message , [FICN-1077], ,, INFO, , DevTapeEgr:Unloaded:Path=:states=0x:cmds=0x: - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 261
VEPortNumber> Domain=0x Port=0x. Probable Cause Indicates an attached port which had a FICON emulated path established has logged out from the switch. Recommended This may be an unexpected event, contact your vendor's customer support for assistance. Action Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 262
on GE,tunnel Id=. Probable Cause Indicates a FICON FCIP tunnel to the peer switch has been terminated. Recommended This is an unexpected event, contact your vendor's customer support for assistance. Action Severity ERROR 204 Fabric OS Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 263
one of the configuration management functions failed. The key variable is part of the Fabric OS configuration database and is for support use only. The a bladed switch, execute the haFailover command. If the problem persists, or if this is a nonbladed switch, download a new firmware version using - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 264
configure command and re-enable fmsMode using the ficonCupSet command. Refer to the Fabric OS Administrator's Guide for information on core PID mode and the Fabric OS Command Reference Manual connectivity control unit port (FICON-CUP) daemon failed. Recommended Download a new firmware version using - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 265
supportSave command and contact your switch service provider. Severity WARNING FICU-1008 Message , [FICU-1008], ,, WARNING, , FMS mode has been enabled. Ports: have been disabled due to port address conflict. Probable Cause Indicates that - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 266
FICON) Management Server mode (fmsMode) was not enabled because the specified port which has an address conflict with the CUP management port is in use. Recommended Use the portDisable command to disable the specified port to avoid the port address conflict. Action Severity WARNING 208 Fabric OS - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 267
Chapter FKLB System Messages 30 FKLB-1001 Message , [FKLB-1001], ,, WARNING, , exchange overlapped, pid= Probable Cause Indicates that the FC kernel driver has timed out the exchange while the application is still active. When the FC kernel - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 268
30 FKLB-1001 210 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 269
, FFDC, WARNING, , Unknown LSR type: port , type Probable Cause Indicates that the link can support. Recommended Reduce the number of switches in the fabric or reduce the number of redundant ISLs between two Action switches. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 270
31 FLOD-1006 Probable Cause Indicates that the received LSR contained an invalid domain number. Recommended No action is required; the LSR is discarded. Action Severity WARNING FLOD-1006 Message , [FLOD-1006], ,, WARNING, , Transmitting invalid domain ID: - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 271
Message , [FSPF-1001], ,, ERROR, , Input Port out of range Probable Cause Indicates that the specified input port number is out of range; it does not exist on the switch. Recommended No action is required. Action Severity ERROR FSPF-1002 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 272
FSPF Version not supported, input port = Probable Cause Indicates that the FSPF version is not supported on the specified input port. Recommended Action Update the FSPF version by running the firmwareDownload command to update the firmware to the latest version. All - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 273
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSS-1002 Message , [FSS-1002], that the Fabric OS state synchronization (FSS) service has dropped the update because an application has not set the transaction - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 274
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR FSS-1005 Message , [FSS-1005], ,, WARNING, , FSS read failure Probable Cause - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 275
eth1 (as root) or run supportShow/supportSave to validate the network configuration; then try to restore the synchronization by issuing the haSyncStart command. If the problem persists, contact your switch service provider. Severity CRITICAL FSS-1008 Message , [FSS-1008], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 276
33 FSS-1011 FSS-1011 Message , [FSS-1011], ,, INFO, , FSS Info: . Probable Cause Indicates that an error has occurred. Recommended No action is required. Action Severity INFO 218 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 277
Recommended Action If this message was logged as a result of a user-initiated action (such as running the switchReboot command), then no problem. If the problem persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 278
fails, the failover will be disruptive. In a switch system, this message is logged when a firmware upgrade/downgrade was invoked. The new firmware version is not compatiable with the current running version. This causes a disruptive firmware upgrade/downgrade. Recommended For a dual CP system, run - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 279
policy of the end-user installation. Typically, low temperatures means that the fans and airflow of a switch are functioning normally. Verify that the location temperature is within the operational range of the switch. Refer to the hardware reference manual for the environmental temperature - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 280
that the speed of the fan has changed. Fan problems typically contribute to temperature problems. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Consistently abnormal fan speeds generally indicate that the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 281
correctly in the chassis. Run the psShow command to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message Probable Cause , [FW-1010], ,, WARNING, , , is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 282
that you have installed the power supply correctly and that it is correctly seated in the Action chassis. If the problem persists, replace the message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1033 Message , [FW-1033], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 283
low boundary. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity WARNING FW-1035 Message , [FW-1035], ,, WARNING, , , is above high boundary(High= - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 284
threshold, the SFP is deteriorating. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 226 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 285
35 FW-1041 FW-1041 Message , [FW-1041], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the transmit power value of the small form-factor pluggable (SFP) has - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 286
is deteriorating. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1045 Message , [FW-1045], ,, INFO, , , value has changed(High= - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 287
as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 288
range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1113 Message , [FW-1113], ,, INFO, , , value has changed(High=, Low - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 289
errors. A low number of E_Port failures means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1115 Message , [FW-1115], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 290
a transient error and might not require troubleshooting. Severity INFO FW-1118 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 291
of domain IDs in a single fabric and the principal switch has to assign another domain ID to the switch. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1122 Message , [FW-1122 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 292
switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 293
switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 294
switches. • Incompatible link parameters. During E_Port initialization, ports exchange link parameters. Rarely, incompatible parameters result in segmentation. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 295
configuration. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation logins has fallen below the low boundary. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 296
boundary. Fabric logins occur when a port or device initializes with the fabric. The event is called a fabric login or FLOGI. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1136 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 297
to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1160 Message Probable Cause , [FW-1160], ,, INFO, , , , value has changed(High=, Low=). Current value - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 298
of link failures that the port experiences has fallen below the troubleshoot them. A low number of link loss errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 299
and, if applicable, troubleshoot them. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1164 Message , [FW-1164], ,, INFO, , , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 300
you continue to experience loss-of-synchronization errors, troubleshoot your host bus adaptor (HBA) and contact your switch service provider. Severity WARNING FW-1167 Message , [FW-1167], ,, INFO, , , , is between high and low boundaries - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 301
user installation. A low number of signal loss errors means that the switch is functioning normally. Severity INFO FW-1170 Message , [FW-1170], ,, WARNING, , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 302
of protocol errors that the port experiences has fallen below the low problems. A low number of protocol errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 303
a hardware problem with an small form-factor pluggable (SFP) or cable. A low number of invalid words means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 304
to the particular policy of the Action end-user installation. A low number of invalid CRCs means that the switch is functioning normally. Severity INFO FW-1182 Message Probable Cause , [FW-1182], ,, WARNING, , , , is above high boundary - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 305
Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1185 Message , [FW-1185], ,, INFO, , , , is below low boundary(High=, Low=). Current value is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 306
. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1188 Message , [FW-1188], ,, INFO, , , , value has changed(High=, Low=). Current value is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 307
Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1190 Message , [FW-1190], ,, INFO, , , , is above high boundary(High=, Low=). Current value is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 308
, has segmented, or has become a trunk port. A low number of port state changes means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1194 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 309
user installation. A low Action number of link resets means that the switch is functioning normally. Severity INFO FW-1198 Message , [FW-1198], ,, WARNING, , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 310
arbitrated loop physical address (AL_PA) cyclic redundancy problem in this area. A low level of invalid CRC errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 311
should configure a five- or six-figure high boundary for this area. Only five-figure (or higher) values for CRC errors indicate problems. problem in this area. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 312
to this message as is appropriate to the particular policy of the end-user installation. A low number of CRC errors means that the fabric is functioning normally error area of the end-to-end performance monitor class helps the user tune the fabric. To reduce CRC errors, experiment with alternative - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 313
that the switch receives has changed. Receive performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 314
the switch transmits has changed. Transmit performance messages appear due to the number of word frames that travel from the configured S_ID to the D_ID pair. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 315
changed. The port has received small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 316
range. The port has received a small computer system interface (SCSI) Read, SCSI Write, SCSI Read and Write, SCSI Traffic, or IP commands in a frame. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 317
list of internet protocol (IP) addresses that are authorized to establish Telnet connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 318
are authorized to establish browser connections to the switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 319
that are authorized to establish API connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 320
that are authorized to establish API connections to switches in the fabric. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 321
"get" operation request has been received from an unauthorized IP address. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 322
"get/set" operation request has been received from an unauthorized IP address. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 323
ports that are allowed to access the SES Server functionality. Recommended Action Run the errShow command to determine the IP address that sent the request. Responses to security class messages depend on user computer system interface (SCSI) Enclosure Services (SES) request has been received from - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 324
a small computer system interface (SCSI) Enclosure Services (SES) request has been received from an to security-class messages depend on user policies. Consult your security administrator for MS_POLICY contains a list of WWNs of device ports that are allowed to access the Management Server - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 325
name (WWN). The MS_POLICY contains a list of WWNs of device ports that are allowed to access the Management Server functionality. Recommended Action Run the request. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 326
. The SERIAL_POLICY contains a list of switch world wide names (WWNs) for which serial port access is enabled. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 327
within the acceptable range. Serial violations indicate that an unauthorized serial port request has been received. The SERIAL_POLICY contains a list of switch world wide names (WWNs) for which serial port access is enabled. Recommended No action is required. Action Severity INFO FW-1328 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 328
FRONTPANEL_POLICY contains a list of switch world wide names (WWNs) for which front panel access is enabled. Recommended Action Run the errShow command to determine the Runoff the device that sent the request. Responses to security-class messages depend on user - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 329
The SCC_POLICY contains a list of switches by world wide names (WWNs) that are allowed to be members of a fabric. Recommended Action Run the errShow command to determine the WWN of the device that sent the request. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 330
through the name server. Recommended Action Run the errShow command to determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator for response strategies and policies. Severity INFO FW-1337 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 331
determine the device WWN, switch WWN, and switch port. Responses to security-class messages depend on user policies. Consult your security administrator command to determine the IP location of the login attempt. Responses to security-class messages depend on user policies. Consult your security - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 332
to determine the IP location of the login attempt. Responses to security-class messages depend on user policies. Consult your configuration server (FCS). When the primary FCS downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 333
received from the primary world wide name (WWN). When the primary fabric configuration server (FCS) downloads a new configuration to other switches in the fabric, the packet is tagged with a timestamp. The receiving switch compares this timestamp to its current time. If the difference is too great - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 334
switch. If verification fails, it rejects the packet. This counter keeps track of the number of packets received with invalid signatures. Recommended Responses to security-class messages depend on user configuration server (FCS). When the FCS downloads a new configuration to the other switches - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 335
from the primary fabric configuration server (FCS). When the primary FCS downloads a new configuration to the other switches in the fabric, switch. This counter keeps track of the number of packets received with invalid certificates. Recommended Responses to security-class messages depend on user - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 336
certificate has been received from the primary fabric configuration server (FCS). Before a new primary FCS switch sends any configuration data to any switch in the fabric, it first sends its certificate to all the switches in the fabric. The receiving switch has to verify that the sender is the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 337
the low boundary. Authentication failures can occur for many reasons. The switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port where authentication fails is segmented. This counter keeps track of the number - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 338
switch on the other side might not support the protocol, have an invalid certificate, not be signed properly or send unexpected packets. The port IDs. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 339
value is . Probable Cause Indicates that the number of switch link authentication protocol (SLAP) faulty packets has risen above the high boundary of time service (TS) out-of-sync violations has changed. Recommended Responses to security-class messages depend on user policies. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 340
depend on user policies. that the number of time service (TS) out-of-sync violations switch loses contact with the primary fabric configuration server (FCS) fabric configuration server (FCS) switch. When the primary FCS switch in the fabric sends its certificate to a switch, the receiving switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 341
has fallen below the low boundary. This counter records how often the switch loses contact with the primary fabric configuration server (FCS) switch. When the primary FCS switch in the fabric sends its certificate to a switch, the receiving switch saves the world wide name (WWN) of that primary FCS - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 342
only to another switch that is in secure mode and has a compatible security database. A compatible security database means that the version stamp and fabric configuration server (FCS) policy matches exactly. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 343
only to another switch that is in secure mode and has a compatible security database. A compatible security database means that the version stamp and fabric configuration server (FCS) policy matches exactly. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 344
fabric configuration server (FCS) switch have been executed on a non-primary FCS switch. There are many commands that can be executed only on the primary FCS switch as commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 345
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1401 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 346
decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1424 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 347
Severity WARNING FW-1429 Message , [FW-1429], ,, WARNING, , Switch status change contributing factor: Power supplies are not redundant. Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the power supplies are - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 348
35 FW-1430 FW-1430 Message , [FW-1430], ,, WARNING, , Switch status change contributing factor . Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of faulty temperature sensors is greater - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 349
redundant. If you power cycle a Brocade 24000 chassis in dual-domain configuration, and then reset the micro-switch of the active CP before the firmware levels. Run the firmwareDownload command to install the same level of firmware to both CPs. Replace any faulty CPs. If you reset the micro-switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 350
FW-1437 Message , [FW-1437], ,, WARNING, , Switch status change contributing factor faulty ports: . (Ports . Probable Cause Indicates that the switch status is not in a healthy state. This occurred because the number of - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 351
35 FW-1440 Severity WARNING FW-1440 Message , [FW-1440], ,, INFO, , state has changed to . Probable Cause Indicates that the state of the specified field-replaceable unit (FRU) has changed to "absent". Recommended No action is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 352
for full (2X) redundancy, but the user has previously overridden the Switch Status Policy values pertaining to number of power supplies. So those values will not be automatically changed. The default values with no AP blades are: 3 out of service indicates switch status is DOWN, 0 indicates no - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 353
these errors occur due to software glitches. Persistent errors occur due to hardware problems. Recommended Check for concurrent loss of synchronization errors. Check the SFP and the cable. Then enable the Action port using the portEnable command. Severity INFO Fabric OS Message Reference 295 53 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 354
35 FW-1510 296 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 355
standby CP blade by ejecting the card and reseating it. If the problem persists, replace the standby CP. Severity CRITICAL HAM-1002 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 356
36 HAM-1005 • Fastboot • Giveup Master:SYSM • CP Faulty:SYSM • FirmwareDownload • ConfigDownload:MS • ChangeWWN:EM • Reboot:WebTool • Fastboot:WebTool • Software Fault:Software Watchdog • Software Fault:Kernel Panic • Software Fault:ASSERT • Reboot:SNMP • Fastboot:SNMP • Reboot • Chassis Config • - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 357
at certain stage or cold/warm recovery failed. If auto-reboot is enabled, the system will automatically reboot itself. Otherwise you need to manually reboot it. Recommended For a reliable recovery, reboot the system manually if auto-reboot recovery is disabled. Action Severity CRITICAL HAM-1008 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 358
36 HAM-1009 300 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 359
recovery. RUn supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL HAMK-1002 Message , [HAMK-1002], ,, INFO, , Heartbeat down. Probable Cause Indicates - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 360
37 HAMK-1004 HAMK-1004 Message ,[HAMK-1004], ,, INFO, , Resetting standby CP (double reset may occur). Probable Cause Indicates that the standby control processor (CP) is being reset due to a loss of heartbeat. This message is typically seen when the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 361
is above the threshold. Recommended Replace the faulty blade or switch (for nonbladed switches). Action Severity ERROR HIL-1102 Message , [HIL supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power supply FRU as necessary. Severity ERROR - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 362
supply FRU to verify that they are seated properly. If the problem persists, replace the fan FRU or the power supply FRU as the entire switch must be replaced because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 363
switch must be replaced because these switches do not have field-replaceable units (FRUs). For the Brocade 3900, replace the motherboard FRU. For the Brocade 4100 within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 364
of your switch. Refer to the hardware reference manual for your switch for the switches and is not applicable to the Brocade 24000 or 48000. Recommended Action For the Brocade 3900 replace the fan FRU. For the Brocade 3016, 3250 and 3850, the entire switch must be replaced because these switches - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 365
problem can quickly cause the switch to overheat. This message is specific to nonbladed switches and is not applicable to the Brocade 24000 or 48000. Recommended For the Brocade operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 366
-replaceable unit (FRU) has failed or has been removed. This message is often preceded by a low speed error message. This problem can cause the switch to overheat. Recommended Replace the affected fan FRU immediately. Action Severity WARNING HIL-1302 Message , [HIL-1302], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 367
38 HIL-1305 Severity ERROR HIL-1305 Message , [HIL-1305], ,, ERROR, , One or two fans failed. Replace failed fan FRUs immediately. Probable Cause Indicates that multiple fan field-replaceable units (FRUs) have failed. This message is often preceded by a - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 368
oscillation between faulty and non-faulty behavior. Replace the switch because the fan is not field-replaceable. Severity INFO HIL-1401 Message , [HIL-1401], ,, WARNING, , One fan FRU missing. Install fan FRU immediately. 310 Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 369
FRUs immediately. Action Severity WARNING HIL-1404 Message , [HIL-1404], ,, WARNING, , fan FRUs missing. Install fan FRUs immediately. Probable Cause Indicates that one or more fan field-replaceable units (FRUs) have been removed. Recommended - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 370
sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range. If the message persists, replace the blade. Severity CRITICAL HIL-1503 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 371
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 372
. To help prevent future problems, make sure that all the fans are working properly. Make sure that the area is well-ventilated and that the room temperature is within operational range of your switch. Refer to the hardware reference manual for your switch for the operational temperature range - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 373
count> fans out of service. System is shutting down immediately. Probable Cause Indicates that the total fan failure count is greater than or equal to two. Recommended To avoid causing damage to the switch, the system shuts down automatically. To help prevent Action future problems, make sure that - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 374
Recommended Ensure the power cord is connected to the unit with a valid power source and then switch on the Action unit. If the problem persists, try reseating the unit. If the problem still persists replace the FRU. Severity WARNING HIL-1650 Message , [HIL-1650], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 375
from port , correct value . Probable Cause Indicates that the HLO message was incompatible with the value specified in the FSPF protocol. The Brocade switch will not accept FSPF frames from the remote switch. In the Fabric OS, the HLO dead timeout value is not configurable, so - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 376
an invalid HLO because either the domain or port number in the HLO message has an invalid value. This error can only occur when the Brocade switch is connected to a switch from another manufacturer. Recommended The HLO message of the remote switch must be compatible with the value specified in - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 377
there was a problem reading an essential file containing configuration information from the nonvolatile storage device. This could be the result of a missing file or a corrupt file system. Recommended Action Run the firmwareDownload command to reinstall the firmware to your switch. If the message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 378
40 HMON-1001 320 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 379
HTTP-1001], ,, INFO, , Switch PIDformat has changed to . Probable Cause Guide. Severity INFO HTTP-1002 Message , [HTTP-1002], , AUDIT, INFO, , Zoning transaction initiated by User: , Role: - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 380
41 HTTP-1003 322 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 381
, [FKLB-1001], ,, ERROR, , Slot , Port GE: Maximum attempts to restart failed. Disabling port. Probable Cause Indicates that the specified port has crashed unexpectedly and restarting attempts have failed. Recommended Power off and - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 382
42 IBD-1001 324 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 383
name>, iSCSI login sessions exceed the maximum limit at slot port ge Probable Cause Indicates that the iSCSI login sessions exceed the supported limit per port. Recommended Use another port to log in. Action Severity WARNING Fabric OS Message Reference 325 53-1001157 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 384
43 IBPD-1003 326 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 385
ICPD-1004 Message Probable Cause , [ICPD-1004], ,, WARNING, , iSNS Client service is detected on multiple switches in fabric. Indicates the iSNS Client service is enabled on multiple switches in the fabric. Fabric OS Message Reference 327 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 386
[ICPD-1005], ,, WARNING, , iSCSI configuration between local switch () and peer () is -name>, iSCSI service is on the switch. Probable Cause Indicates the iSCSI service is enabled or disabled on the switch. Recommended No - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 387
Recommended No action is required. Action Severity INFO 44 ICPD-1008 Fabric OS Message Reference 329 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 388
44 ICPD-1008 330 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 389
address and prefix> . Probable Cause Indicates that a change in the local IP address has occurred. If the source of the address change is manual, this means that the address change was initiated by a user. If the source of the address change is the dynamic host configuration - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 390
45 IPAD-1001 332 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 391
transfers; then run the supportSave command and contact your switch service provider. Severity WARNING IPS-1004 Message , [IPS-1004], ,, WARNING, , Port Config Mode Mismatch slot () port(ge): current mode is () Fabric OS Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 392
the remote side to set up Action the tunnel. Severity WARNING IPS-1006 Message , [IPS-1006], ,, WARNING, , Tunnel Configuration Mismatch for slot () port() tunnel ID() reason () Probable Cause Indicates that tunnel - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 393
[ISCS-1000], ,, ERROR, , Slot Port GE crashed unexpectedly. Probable Cause Indicates the specified port has crashed. Recommended No action is required; the port will restart automatically. Action Severity ERROR Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 394
47 ISCS-1000 336 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 395
system-name>, Configuration peering with external iSNS server slot/port /ge (current /ge). Probable Cause Indicates that the user has issued - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 396
request re-register with external iSNS server slot/port /ge. Probable Cause Indicates a user has requested a re-register with the specified external internet storage name service (iSNS) server. Recommended No action is required. Action Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 397
. Refer to the appropriate hardware reference manual for valid slot and Action port ranges. Severity WARNING ISNS-1011 Message , [ISNS-1011], ,, INFO, , iSNS Client Service is . Probable Cause Indicates the current - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 398
-name>, Start peering with external iSNS server on management port. Probable Cause Indicates that peering has started with the specified external internet storage name service (iSNS) on the management port. Recommended No action is required. Action Severity INFO 340 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 399
client is unable to communicate with the primary or backup key vault. Recommended Determine whether the configured key value is operational, and if it is not, change the switch key Action vault settings. Severity ERROR KAC-1004 Message , [KAC-1004], ,, ERROR, - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 400
archival client is unable to put to the primary or backup key vault. Recommended Determine whether the configured key value is operational, and if it is not, change the switch key Action vault settings. Severity ERROR KAC-1008 Message , [KAC-1008], ,, ERROR, - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 401
. An abort signal is sent. Recommended Copy the warning message along with any core file information, and contact your switch service Action provider. Severity WARNING KSWD-1002 Message , [KSWD-1002], , FFDC, WARNING, , Detected termination of - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 402
found, run supportFtp to send all core files to a secure server location. Copy the warning message along with any core file information, and contact your switch service provider. Severity WARNING 344 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 403
Chapter KTRC System Messages 51 KTRC-1001 Message , [KTRC-1001], ,, WARNING, , Dump memory size exceeds dump file size Probable Cause Indicates the dump memory size has exceeded the dump file size. Recommended No action is required. Action Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 404
51 KTRC-1005 Recommended No action is required. Action Severity ERROR KTRC-1005 Message , [KTRC-1005], ,, ERROR, , Trace initialization failed. . . Probable Cause Indicates that a trace was unable to - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 405
Manager service is enabled by the factory setting and it is not user configurable. Recommended No action is required. Action Severity INFO LFM-1003 Message , [LFM-1003], ,, INFO, , The Logical Fabric Manager configuration is set to default. Probable - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 406
reason for port disable using switchshow command, rectify the cause and re-enable the Action LISL using the lfcfg --lislenable command. Severity CRITICAL LFM-1006 Message , [LFM-1006], ,, WARNING, , The switch with domain with firmware version - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 407
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING LOG-1002 Message , [LOG-1002], , FFDC, WARNING, , A log message was dropped - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 408
53 LOG-1003 LOG-1003 Message , [LOG-1003], ,, INFO, , The log has been cleared. Probable Cause Indicates the persistent error log has been cleared. Recommended No action is required. Action Severity INFO 350 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 409
ID, whose range is from 1 through 239. The switch will discard the record because it is not supported. Recommended No action is required. Action Severity ERROR LSDB- state record). The switch generates its local link state record when first enabled. By disabling and enabling the switch, a new - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 410
for domain Probable Cause Indicates there is no link state record for the specified local domain. Recommended No action is required. The other switch will pass the LSD once the fabric is stable. Action Severity WARNING 352 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 411
service provider. Severity ERROR MFIC-1002 Message , [MFIC-1002], ,, INFO, , Chassis FRU header not programmed for switch NID, using defaults (applies only to FICON environments). Probable Cause Indicates that custom switch node descriptor (NID) fields - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 412
55 MFIC-1003 Recommended Action IDID mode is a fabric-wide mode; make sure that any switches added to the fabric are configured with the same IDID mode as the fabric. If you are enabling or disabling IDID mode, this message is for information purposes only, and no action is required. IDID mode can - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 413
Chapter MPTH System Messages 56 MPTH-1001 Message , [MPTH-1001], , FFDC, ERROR, , Null parent, lsId = Probable Cause Indicates a null parent was reported. MPATH uses a tree structure in which the parent is used to connect to the root of the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 414
56 MPTH-1003 356 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 415
• 7 - MSG_LINIT_IU • 8 - MSG_RSCN • 9 - MSG_IOCTL • 10 - MSG_ACCEPT • 11 - MSG_IU_FREE • 12 - MSG_US • 13 - MSG_EXT_RSCN • 14 - MSG_RDTS_START • 15 - MSG_RDTS_SENDEFP • 16 - MSG_RDTS_RESET Recommended No action is required. Action Severity ERROR Fabric OS Message Reference 357 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 416
57 MQ-1004 358 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 417
. • The GCAP (MS Get Capabilities) is supported but the flag for MS platform service is not set. • The GCAP (MS Get Capabilities) is not supported by another switch. • The request to the exchange platform database was - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 418
) by> Run the firmwareDownload command to upgrade the firmware level on the switch to a level that supports RCS. RCS is supported in Fabric OS v2.6, v3.1 and FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO MS-1004 Message , [MS- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 419
If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR MS-1008 Message , [MS-1008], ,, ERROR, , MS Failure while initializing - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 420
system-name>, RLIR event. Switch Port ID is (). Device Port Tag is . . Probable are likely the result of SAN hardware problems such as bad cables or the Action supportSave command and contact your switch service provider. Severity ERROR MS-1022 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 421
Management Server Topology Discovery Service is being enabled or disabled. Recommended No action is required. Action Severity INFO MS-1024 Message , [MS-1024], ,, INFO, , Management Server Access Control List is Updated. Probable Cause Indicates the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 422
58 MS-1024 364 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 423
Wait • 4 - Database Wait • 5 - Full If this error occurs repeatedly, then there is a problem in the protocol implementation between two switches. Recommended Action Run the nbrStateShow command to check the neighbor state of the port listed in the message. If it is FULL, then this message can - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 424
in state , input , port Probable Cause Indicates the database transmit set flag - Full Recommended No action is required. The Fabric OS automatically recovers from this problem. Action Severity WARNING 366 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 425
payload exceeds the maximum frame size the remote switch can handle. Recommended Action Run the firmwareDownload command to upgrade the remote switch with firmware v4.3 or higher, as appropriate for the switch type, so that it can support GMI to handle frame fragmentation and reassembly. You - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 426
name server on the standby CP has lower supported capability than the active CP because of different firmware versions running on the active and standby CPs. zone size to 1024 or smaller, or upgrade the software of the remote switch to support Action 2048 zones. Severity WARNING NS-1006 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 427
by a missing configuration file during the installation. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 428
the configuration file sync.conf contains too many entries. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 429
the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING PDM-1009 Message , [PDM-1009], ,, WARNING, , Can't update Port - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 430
configuration file /etc/fabos/fabos.[0|1].conf is empty. Recommended Action Run the firmwareDownload command to reinstall the firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 431
firmware. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service PDM-1021], ,, WARNING, , Failed to download area port map. Fabric OS Message Reference 373 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 432
its peer because the firmware does not support IPv6. Recommended Action Configure the local switch with IPv4 addresses. If the message service (DNS) is configured for IPv6. IPv6 is not supported by older firmware. Recommended Action Run the firmwareDownload command to reinstall the firmware - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 433
61 PDM-1024 Fabric OS Message Reference 375 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 434
61 PDM-1024 376 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 435
Chapter PDTR System Messages 62 PDTR-1001 Message , [PDTR-1001], ,, INFO, , . Probable Cause Indicates information has been written to the panic dump files. The watchdog register codes are as follows: • 0x10000000 bit set means - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 436
62 PDTR-1002 378 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 437
up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PLAT-1001 Message , [PLAT-1001], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 438
timestamp>, [PLAT-1003], , FFDC, CRITICAL, , Slot C/BE: ADBUS: misc_intr . Probable Cause Indicates a PCI bus hang was detected. Recommended The FRU - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 439
PMGR System Messages 64 PMGR-1001 Message , [PMGR-1001], , INFO, , Switch was successfully created. Probable Cause Indicates the switch with the specified FID was successfully created. Recommended No action is required. Action Severity INFO PMGR - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 440
No action is required. Action Severity INFO PMGR-1006 Message , [PMGR-1006], , WARNING, , Moving Ports on slot to switch failed. Error message: . Probable Cause Indicates the unsuccessful attempt to move the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 441
-1009 Message , [PMGR-1009], , INFO, , The base switch was successfully changed to switch . Probable Cause Indicates the successful change of the base switch. Recommended No action is required. Action Severity INFO PMGR-1010 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 442
64 PMGR-1010 384 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 443
to be enabled. Severity INFO PORT-1005 Message Probable Cause , [PORT-1005], ,, WARNING, , Slot port does not support configured L_port. Issue portCfgLport to clear configuration. Indicates the specified port is configured to - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 444
65 PORT-1005 Recommended Invoke the portCfgLport to clear the L_port configuration. Action Severity WARNING 386 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 445
. If it does not, reboot or power cycle the switch to Action reinitiate the firmware. Severity CRITICAL PS-1001 Message , [PS-1001], ,, INFO, , Advanced Performance Monitoring configuration updated due to change in PID format Probable Cause Indicates the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 446
on port which is an ISL port. Probable Cause Indicates that the restoring configuration has attempted to add end-to-end monitors on at least one ISL port. Recommended No action is required. End-to-end monitoring is not supported on ISL ports when ISL monitoring is Action enabled. ISL - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 447
INFO PSWP-1002 Message , [PSWP-1002], ,, INFO, , Port Swap feature enabled. Probable Cause Indicates the portSwap feature has been enabled in the switch. Recommended No action is required. Action Severity INFO PSWP-1003 Message , [PSWP - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 448
67 PSWP-1003 390 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 449
Indicates that the maximum storage size for FFDC data capture is reached. Recommended Run the supportSave command and contact your switch service provider. Action Severity WARNING RAS-1004 Message , [RAS-1004], , FFDC, WARNING, , Software 'verify' error - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 450
command and contact your switch service provider. Action Severity WARNING RAS-1006 Message , [RAS-1006], , INFO, , Support data file () automatically transferred to remote address ' '. Probable Cause - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 451
68 RAS-3001 Probable Cause A user has changed the configured classes of the audit feature. Recommended No action is number>, INFO, , USB storage device enabled. Probable Cause Indicates that the USB storage device is enabled. Recommended No action is required. Action Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 452
68 RAS-3004 Recommended No action is required. Action Severity INFO 394 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 453
, and v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity INFO RCS-1002 Message , [RCS-1002], ,, INFO, , RCS has been enabled. Probable Cause Indicates the RCS feature has been - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 454
in Fabric OS v2.6, v3.1 and greater, and v4.1 and greater. Run the firmwareDownload command to upgrade the firmware for any switches that do not support RCS. Severity ERROR RCS-1005 Message , [RCS-1005], ,, INFO, , Phase , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 455
1007 Message , [RCS-1007], ,, ERROR, , Zone DB size and propogation overhead exceeds domain 's maximum supported Zone DB size . Retry after reducing the Zone DB size. Probable Cause Indicates a domain cannot handle the zone - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 456
69 RCS-1008 398 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 457
Chapter RKD System Messages 70 RKD-1001 Message , [RKD-1001], ,, INFO, , operation .\nTarget: , Initiator: - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 458
70 RKD-1003 400 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 459
: client \"\" has bad credentials: Probable Recommended To enable RPCD in secure mode, install a valid SSL certificate on the switch. Action Severity Cause Indicates the SSL certificate file configured on the switch could not be accessed because the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 460
RPCd is disabled. Probable Cause Indicates the SSL certificate file has been corrupted. Recommended To enable RPCD in Secure mode, install a valid SSL certificate the switch. Action Severity WARNING RPCD-1005 Message , [RPCD-1005], ,, WARNING, , Missing - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 461
see if the specified domain ID is online. Enable the switch with the specified domain ID. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 462
ID is reachable. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO 404 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 463
73 SAS-1001 Message , [SAS-1001], ,, ERROR, , string description of command which failed> of GE failed. Please retry the command. Data inst= st= rsn= fn= oid - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 464
73 SAS-1001 406 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 465
daemon name are listed below. For a complete listing, see the Introduction to this manual. • fabricd • asd • evmd • fcpd • webd • msd • nsd switch. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 466
74 SCN-1001 408 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 467
database sent from the primary fabric configuration server (FCS) switch. This might be caused by several factors: the data package may be corrupted, the time stamp on the package may be out of range as a result of replay attack or out-of-sync time service, or the signature verification failed - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 468
if the updating counter fails. Recommended Action If the message is the result of a user command, retry the statistic command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 469
establish API connection. Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the API connection. Action Severity INFO SEC-1008 Message , [SEC - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 470
, , Invalid IP address () detected. Probable Cause Indicates a corruption occurred during the distribution of the security database. This can occur only when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 471
occur only when the primary fabric configuration server (FCS) distributes the security database to the other switches in the fabric, then local the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 472
updated for that specific switch. Severity ERROR SEC-1031 Message , [SEC-1031], ,, WARNING, , Current security policy DB cannot be supported primary fabric configuration server (FCS) is distributing the security database to the other switches in the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 473
command. Only the secPolicyCreate command supports use of the asterisk for adding switches to policies. Recommended Action Run the secPolicyAdd command using a valid switch identifier (WWN, domain ID, or switch name) to add specific switches to the switch connection control (SCC) policy. Refer - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 474
format. Recommended Run the command again using the standard WWN format, 16 hexadecimal digits grouped as eight Action colon separated pairs. For example: , Invalid port member in portlist (). . Probable Cause Indicates the port member is invalid for - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 475
ERROR, , Too many port members. Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 476
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 477
>, Missing brace for port list . Probable Cause Indicates there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 478
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 479
configuration server (FCS) is distributing the security database to the other switches switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch than the maximum number supported are specified. Recommended Enter - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 480
switch are not in a valid state and the signature operation failed. Recommended Run the pkiShow command to verify that all PKI objects are valid. If PKI objects are not valid, Action generate the PKI objects and install the certificate by following the field upgrade your switch service provider. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 481
transfers; then run the supportSave command Action and contact your switch service provider. Severity ERROR SEC-1074 Message , [SEC-1074 a switch that is not allowed to run it either because it is in non-secure mode or because it does not have the required fabric configuration server - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 482
switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch to communicate with others nodes in the zone. Recommended Re-enable the current zone configuration for the change to take effect. Action Severity ERROR SEC - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 483
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 484
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 485
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 486
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 487
only occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local validation switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 488
switch service provider. Severity ERROR SEC-1099 Message , [SEC-1099], ,, ERROR, , Please enable your switch occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 489
key. Recommended Action Verify the primary switch has a valid certificate installed and retry the operation. If a valid certificate is not installed, install a certificate by following the procedure specified in the Secure Fabric OS Administrator's Guide. Fabric OS Message Reference 431 53 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 490
Secure Fabric OS Administrator's Guide. Severity ERROR SEC-1107 configuration server (FCS) is distributing the security database to the other switches switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 491
in the Active Security policies, and the same as the current active FCS list in the switch. Indicates that either a security policy download is attempted with an active policy that does not have the fabric configurations server (FCS) policy as the first policy or the FCS policy is not same as the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 492
Indicates that during an attempted secFcsFailover, no primary fabric configurations server (FCS) is present in the fabric. Recommended Run the secFabricShow command to verify that all switches in fabric are in the ready state. When Action all switches are in the ready state, retry the operation - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 493
failed to save the data received by the primary fabric configuration server (FCS) switch. This data can be an FCS password, a non-FCS password, SNMP data, or multiple user authentication data. Recommended Run the secFabricShow command to verify that all switches in the fabric are in the ready state - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 494
. Probable Cause Indicates the time on the switch is not synchronized with the primary fabric configuration server (FCS), the data packet is corrupted, downloaded by Primary FCS. Probable Cause Indicates the security database was successfully downloaded from the primary fabric configuration - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 495
INFO SEC-1130 Message , [SEC-1130], ,, INFO, , The Primary FCS has failed over to a new switch. Probable Cause Indicates an FCS failover operation was completed successfully. Recommended Action Verify the security event was planned. If the security - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 496
the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that switch. download received from Primary FCS. Probable Cause Indicates that a non-primary fabric configuration server (FCS) switch received a security database download - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 497
configuration server (FCS) switch. This message usually indicates that the data package is corrupted, the time stamp on the package is out of range as a result of a replay attack or out-of-sync time service the specified policies have changed. • The passwords have changed for the specified accounts. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 498
must be capable on all switches in the fabric to be enabled. If all switches are capable, it is automatically enabled. For any switch that does not support RCS, obtain the latest firmware version from your switch supplier, and run the firmwareDownload command to upgrade the firmware. If the message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 499
command. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO SEC-1158 Message , [SEC-1158], ,, INFO, , Invalid name - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 500
, , Lockdown option cannot be applied on a non-FCS switch. Probable Cause Indicates the attempt to enable security is made on a switch that is not present in the fabric configuration server (FCS) list. Recommended Add the switch to the FCS policy list when using the lockdown option to - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 501
memory, failed to enable security on all switches. Probable Cause configuration server (FCS) is distributing the security database to the other switches switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 502
occur when the primary fabric configuration server (FCS) is distributing the security database to the other switches in the fabric and local command to create them for the switch. Run the licenseAdd command to install the required license key. Refer to your switch supplier to obtain a license if - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 503
with Primary FCS switch. Probable Cause Indicates the switch has lost contact with the primary fabric configuration server (FCS) switch in the secure Failed to install zone data. Probable Cause Indicates the zone database could not be installed on the switch. Recommended Verify all switches in - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 504
Verify all switches in the 1180], ,, INFO, , Added account with authorization. Probable Cause Indicates the ERROR, , Policy to binary conversion error: Port is out range. Indicates a security database conversion has - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 505
switch service provider. Severity ERROR SEC-1184 Message , [SEC-1184], ,, INFO, , configuration Configuration. Probable Cause Indicates the remote authentication dial-in user service (RADIUS/LDAP) configuration was enabled or disabled - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 506
tries to FLOGI to index/area of switch . Probable Cause Indicates a device connection control (DCC) INFO, , Security violation: Unauthorized host with IP address tries to do SNMP write operation. Probable Cause Indicates an - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 507
the login failed. Recommended Use the correct password. Action Severity INFO SEC-1193 Message , [SEC-1193], ,, INFO, , Security violation: Login failure attempt via . IP Addr: Fabric OS Message Reference 449 53-1001157 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 508
violating IP address. Verify that this IP address is being used by a valid Action switch admin. Use the correct password. Severity INFO SEC-1194 Message , [SEC-1194], ,, WARNING, , This switch does not have all the required PKI objects correctly installed - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 509
account . Probable Cause Indicates the specified account has changed. Recommended No action is required. Action Severity INFO SEC-1198 Message , [SEC-1198], ,, INFO, , Security violation: Unauthorized host with IP address tries - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 510
configuration server (FCS) switch. Recommended Action Check the management server policy and verify the connection is allowed. If the connection is allowed but not specified, enable >, device port name . Probable IP Addr: Probable Cause Indicates the IP address of - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 511
FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR SEC-1300 Message , [SEC-1300], ,, INFO, , This switch is in VcEncode mode. Security is not supported. Fabric OS Message Reference 453 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 512
Secure Fabric OS feature. Recommended Run the firmwareDownload command to update the firmware to the latest version for your specific Action switch. Verify the firmware you are installing supports the Brocade Secure Fabric OS feature. Severity INFO 454 Fabric OS Message Reference 53-1001157 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 513
configuration server (FCS) is distributing the security database to the other switches switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch Guide. If PKI objects are valid, verify that an unauthorized switch is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 514
Probable Cause Indicates that all servers in the remote authentication dial-in user service (RADIUS) configuration have failed to respond to a switch request within the specified time-out. Recommended Verify the switch has proper network connectivity to the specified remote authentication dial-in - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 515
enabled because one or more of the password policies is not set to default value. Probable Cause Indicates the security enable failed on the fabric because one or more switches in the fabric have password , Reading IP address from EM failed. Fabric OS Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 516
to retrieve the IP address failed. Recommended Reboot the system to fix this error. If the problem persists contact your switch service provider. Action configured for rejection on this switch Probable Cause Indicates there was an attempt to distribute databases to a switch that was configured - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 517
updated dbs(s) Probable Cause Probable Cause Indicates that a domain not supporting an access control list (ACL) policy enable failed on the fabric because the switch has a conflicting configuration such as fabric wide consistency configuration or AD configuration - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 518
support a device connection control (DCC) policy with more than 256 ports. Recommended Reconfigure any policy that includes more than 256 ports in its member list, then save the policy Action configuration the reliable commit service (RCS) transaction Switch connecting to port - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 519
switch with the fabric. Severity ERROR SEC-1326 Message , [SEC-1326], ,, INFO, , Event: fddcfg --fabwideset, Status: success, Info: Fabric wide configuration set to - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 520
correct the configuration if necessary. Severity ERROR SEC-1331 Message , [SEC-1331], ,, ERROR, , Attempt to enable secure mode failed. Reason: . Probable Cause Indicates the secModeEnable command failed on the fabric because default IP Filter - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 521
Disable VF on all the switches that have VF enabled, if PWD/ IPFILTER databases need to be Action distributed. Severity ERROR SEC-3035 Message , [SEC-3035], , AUDIT, INFO, , Event: ipfilter, Status: success, Info: ipfilter policy(ies - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 522
Connection Type>. Probable Cause Indicates that a security violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the specified protocol connection. Action Severity INFO SEC-3050 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 523
75 SEC-3051 Recommended Action Verify the security event was planned. If the security event was planned, no action is required. If the security event was not planned, take appropriate action as defined by your enterprise security policy. Severity INFO SEC-3051 Message , [SEC-3051], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 524
75 SEC-3051 466 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 525
. Probable Cause Indicates the simple network management protocol (SNMP) service could not be started because of the specified Reason. You will not be able to query the switch through SNMP. Recommended Verify the IP address for the Ethernet and Fibre Channel interface is set correctly. If - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 526
. Probable Cause Indicates the simple network management protocol (SNMP) configuration is incorrect and the SNMP service will not work correctly. Recommended Change the SNMP configuration back to the default. Action Severity ERROR SNMP-1005 Message , [SNMP-1005], - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 527
76 SNMP-1008 Severity INFO SNMP-1008 Message , [SNMP-1008], ,, INFO, , The last device change happened at: . Probable Cause Indicates the last device change time. Recommended Execute the nsshow to view the current device status. Action Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 528
76 SNMP-1008 470 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 529
number containing Encryption Engine>, Cryptographic operation enabled. Probable Cause Indicates the cryptographic operation is enabled on an encryption engine. Recommended No -bladed system, perform a fastboot command on the switch to recover the system. Severity INFO Fabric OS Message Reference 471 53 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 530
the Crypto subsystem cover is tampered. Recommended EE is zeroized. User needs to run initEE and regEE. Action Severity CRITICAL SPC-2003 Encryption Engine>, : FPGA firmware download failed: 0x%x. Probable Cause Indicates the FPGA download failed. Recommended No action is required - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 531
2005], ,, INFO, , , : FPGA firmware download success: 0x%x. Probable Cause Indicates the FPGA download was successful. Recommended No action is required. Action Severity INFO SPC-2006 Message , [SPC - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 532
, , : Tamper event: User zeroization. Probable Cause Indicates the Tamper event triggered due to a user zeroize request. Recommended EE is zeroized. User needs to run initEE and regEE. Action Severity CRITICAL SPC-2010 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 533
77 SPC-3001 SPC-3001 Message , [SPC-3001], ,, ERROR, , , : No input KEK for DEK inject, DEK: , KEK: - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 534
format • 32 - DEK could not be unwrapped • 33 - FGPA error upon inject • 73 - Invalid KEK format Recommended Contact technical support. Action Severity ERROR SPC-3006 Message , [SPC-3006], ,, ERROR, , , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 535
status code 14, complete primary KEK generation; otherwise, contact technical support. Action Severity ERROR SPC-3008 Message , [SPC-3008 certificate mismatch, certificate: . Probable Cause Indicates the FIPS certificate within the Crypto Module - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 536
77 SPC-3010 SPC-3010 Message , [SPC-3010], ,, WARNING, , , : SEK integrity failure during initialization. Probable Cause Indicates the Crypto Module internal Secret Encryption Key has been corrupted - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 537
compare failure: successive values match. Probable Cause Indicates the Crypto Module internal random number generator failed. Recommended Contact technical support. Action Severity ERROR SPC-3015 Message , [SPC-3015], ,, ERROR, , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 538
77 SPC-3015 480 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 539
SPM failed to initialize. Recommended Check system resources and reboot switch. Action Severity ERROR SPM-1002 Message , [SPM-1002 system-name>, Set New Group Cfg SC Enable KV Type . Probable Cause User configured. Recommended No action is required. Action - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 540
-1005 Message , [SPM-1005], ,, INFO, , Set EE Control slot action . Probable Cause User configured. Recommended No action is required. Action Severity INFO SPM-1006 Message , [SPM-1006], ,, INFO, - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 541
Severity ERROR SPM-1010 Message , [SPM-1010], ,, ERROR, , Key Vault Certificate is missing. Probable Cause User configured. Recommended Deregister and register this key vault. Action Severity ERROR Fabric OS Message Reference 483 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 542
78 SPM-1010 484 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 543
support information to the host with IP address . Probable Cause Indicates the supportSave command was used to transfer support information command to set the FTP or SCP parameters. Action After the problem is corrected, rerun the supportSave command. Severity WARNING SS-1002 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 544
possible errors in subcommands being executed by the supportSave command. Recommended Run the usbstorage command to check the USB storage device settings. After the USB problem is Action corrected, rerun the supportSave command. Severity WARNING 486 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 545
disruption. Do not fail over or power down the system during firmware upgrade. No action is required. Run the firmwareDownloadStatus command for more the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is required. The - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 546
>, [SULB-1007], ,, INFO, , Standby CP reboots. Probable Cause Indicates the standby CP is rebooting with new firmware. Recommended Action No action is required. The firmwareDownload command is progressing as expected. Run the firmwareDownloadStatus command for more - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 547
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 548
secondary partition. Please use firmwareDownloadStatus and firmwareShow to see firmware status." "firmwareDownload has started on Standby CP. up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 549
started to restore the secondary partition." 0x93 "firmwareCommit failed." 0x94 "The secondary partition has been restored successfully." 0x95 "Firmware is being downloaded to the blade. This step may take up to 10 minutes." 0xa0 "firmwareDownload timed out." 0xa1 "Reboot occurred during - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 550
. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 551
messages: 0x15 - Failed to download Red Hat package manager (RPM) package. If this error occurs immediately after firmwareDownload is started, the firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware upgrades within two feature releases - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 552
before proceeding. 0x29 - The pre-install script failed. This error may be caused firmware packages on the file server, then retry firmwareDownload. If the problem switch, when firmwareDownload fails, the command will synchronize the firmware on the two partitions of each CP by starting a firmware - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 553
upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting the problem persists, contact your switch service provider. Fabric OS Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 554
the blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message , [SULB-1021],, AUDIT, WARNING, , Firmware is being downloaded to the blade in slot . Probable - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 555
. Run the firmwareDownloadStatus command to monitor the progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message , [SULB-1024], AUDIT, WARNING, , Firmware commit has completed on the blade in slot . Probable - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 556
progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message Probable Cause , [SULB-1031], , AUDIT, WARNING, , The switch is relocating an internal firmware image. Indicates the switch has rebooted with the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 557
firmware image on the CP. Probable Cause Indicates the switch has started a firmware download switch. Recommended Run the firmwareShow command to verify the firmware versions. Run the switchShow command to Action make sure the switch is enabled problem persists, contact your switch service provider - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 558
be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1036 Message , [SULB-1036], ,, INFO, , . Probable Cause Indicates the firmware version running in the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 559
flags>. Probable Cause Indicates the switch is enabled before it is ready. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity ERROR SWCH-1002 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 560
fabric. Recommended Load a firmware version on standby that supports NPIV functionality, using the firmwareDownload Action command. Severity WARNING SWCH-1007 Message Probable Cause , [SWCH-1007], ,, WARNING, , Switch port disabled due to - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 561
the blade is enabled with the port configuration that already has area swapped. Recommended Action Replace the blade with ports that support port swap. Then port swap the ports back to ports default area. Refer to the Fabric OS Administrator's Guide for more information on port swapping. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 562
Probable Cause Indicates the standby control processor (CP) does not support Trunk Area functionality, but the switch has some ports with Trunk Area enabled. Recommended Load a firmware version on standby that supports Trunk Area functionality, using the Action firmwareDownload command. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 563
Indicates that on system startup, the option configuration file corresponding to the chassisConfig option read could not be found. This indicates that option is not supported on this platform running this version of the firmware. Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 564
WWN) card). This message occurs only on the Brocade 24000 and 48000. Recommended Action As indicated in firmware. Note that the chassisConfig option 1 should be valid for all platforms running any valid firmware Use the supportSave command to gather troubleshooting data. Issue a reboot or - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 565
SYSM-1002], ,, INFO, , , Switch: Probable Cause Indicates a user has executed either the switchShutdown or switchReboot command. All services are brought down for a logical switch. Recommended Action No action is required if the switchShutdown - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 566
Message , [SYSM-1004], ,, ERROR, , Failed to retrieve current chassis configuration option, ret= Probable Cause Indicates there was a failure to read configuration data from the WWN card. Recommended Verify that the world wide name (WWN) card is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 567
Chapter TAPE System Messages 84 TAPE-1001 Message , [TAPE-1001], , FFDC, INFO, , Key acquisition for . Probable Cause Indicates that the key acquisition for the pool or the container has begun or is complete. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 568
84 TAPE-1001 510 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 569
contact your switch service provider. Severity WARNING TRCE-1002 Message , [TRCE-1002], ,, INFO, , Trace dump< optional slot indicating on which slot the dump occurs > automatically transferred to FTP address ' '. Probable - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 570
command Action and contact your switch service provider. Severity ERROR TRCE-1006 Message , [TRCE-1006], ,, INFO, , FTP Connectivity Test succeeded to FTP site ' '. Probable Cause Indicates that a connectivity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 571
of a change in trace status. This message is only applicable to the Brocade 24000, and 48000. Recommended Action This message is often transitory. Wait FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR TRCE-1008 Message , [TRCE- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 572
your switch service provider. Severity ERROR TRCE-1011 Message , [TRCE-1011], ,, INFO, , Trace dump manually is enabled and retry the command. If the AP blade is already enabled, run Action the supportSave command and contact your switch service provider - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 573
or password is entered incorrectly. Recommended Action Normally, this message indicates a typing error by an authorized user. If this message occurs repeatedly, it might indicate an unauthorized user trying to gain access to a switch. When Secure mode is enabled on the fabric, the IP address of - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 574
feature recorded a configuration change for the switch. The track change feature records any change to the configuration file in nonvolatile Track-changes on. Probable Cause Indicates the track change feature has been enabled. Recommended No action is required. Run the trackChangesSet 0 command to - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 575
FCS switch • External External NTP server address configured This might be logged during temporary operational issues such as IP network connection issues to the external clock server or if the fabric is configured for external time synchronization but the principal or primary FCS does not support - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 576
message might be one of the following: • Init failed. Time Service exiting Probable Cause: Initialization error, Time Server exits. • Synchronizing a time update packet is missed due to fabric reconfiguration or role change of the principal or primary fabric configuration server (FCS) switch. If the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 577
87 TS-1008 Fabric OS Message Reference 519 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 578
87 TS-1008 520 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 579
from the specified output port. The path database (PDB) pointer is the address of the path Port = , should be Probable Cause Indicates the switch detected an inconsistency in the routing database between the routing protocol and the hardware configuration. The first port - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 580
>, [UCST-1025], ,, INFO, , In-order delivery option has been enabled with Lossless-DLS option. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No action is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 581
1001 Message , [UPTH-1001], ,, WARNING, , No minimum cost path in candidate list Probable Cause Indicates the specified switch is unreachable because no minimum cost path (FSPF UPATH) exists in the candidate list (domain ID list). Recommended No action is - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 582
89 UPTH-1001 524 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 583
sequence-number>,, WARNING, , Missing or Invalid Key file -- HTTPS is configured but could not be started. Probable Cause Indicates the SSL key file is either invalid or absent. Recommended Install a valid key file. Action Severity WARNING WEBD-1004 Message , [WEBD-1004 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 584
will be restarted due to change of IP Address. Probable Cause Indicates the IP address of the switch changed and the HTTP server is restarted. in recovery process has failed to restore HTTP services. The problem often results from invalid configuration of SSL certificates, but there can be more - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 585
message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command to save these core files and contact your switch service provider. Severity ERROR Fabric OS Message Reference 527 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 586
91 ZOLB-1001 528 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 587
usually indicates problems when adding content-addressable memory (CAM) entries before the filter setup. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 588
using one method or the other to define all objects in the zoning database. If the devices on the port are defined by a mixture of port IDs and WWNs, the zone enforcement is session based. If the S_ID list of the hardware-enforced zoning overflows (over the S_ID limit), the hardware zone enforcement - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 589
content-addressable memory (CAM) entries before the filter setup. Recommended Action There are two ways to avoid this problem. • Avoid having too many hosts zoned with a set of target devices at a single port. • Avoid having too many zones directed at a single port group on the switch. Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 590
configuration is enabled on the switch, it will not be supported. Recommended Edit the zone database to remove the QuickLoop zoning definition in the effective configuration is missing. Recommended Install the zoning license using the licenseAdd command. Refer to your switch supplier to obtain a - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 591
based hard zoning (value = 3) • FA zone (value = 5) QuickLoop zones are not supported in Fabric OS v4.x and above. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 592
was done on purpose. If the new effective zone configuration Action is correct, no action is necessary. Severity INFO ZONE-1023 Message , [ZONE-1023], ,, INFO, , Switch connected to port () is busy. Retry zone merge. Probable Cause Indicates - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 593
zone database to keep it within the allowable limit for the specific switches in your fabric. Refer to the Fabric OS Administrator's Guide for information on the zone database sizes supported for each switch. Severity WARNING ZONE-1029 Message Probable Cause Recommended Action , [ZONE - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 594
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING ZONE-1030 Message , [ZONE-1030], , , Switch is in interop mode. (switch, port) members not supported. Probable Cause Indicates the switch is set to interop - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 595
error message . Probable Cause Indicates the Fabric OS cannot rename the zone configuration file. Typically the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 596
zone database exceeds limit. Probable Cause Indicates the Fabric OS cannot read the merged zone configuration file. Typically the zone configuration is too large for the memory available on the switch. Recommended Reduce the size of the zone database and retry the operation. Action 538 Fabric - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 597
, Unstable link detected during merge at port (). Probable Cause Indicates a possible unstable link or configuration Action is needed, no action is necessary. Severity INFO ZONE-1043 Message , [ZONE-1043], ,, INFO, , The Default - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 598
-number>,, INFO, , Switch domain () does not support defined database. Probable Cause Indicates a remote Brocade switch is running a downlevel version of Fabric OS that does not support the defined database. Recommended It is recommended to upgrade all swtiches to a same - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 599
>, [ZONE-1052], ,, INFO, , The Interop Default Zone state is set to enabled. Probable Cause Indicates the Interop Default Zone attribute state is enabled. Recommended Verify if the Interop Default Zone attribute state change was done on purpose. Action Severity INFO - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 600
, [ZONE-1053], ,, INFO, , The Default Zone state is set to Disabled. Probable Cause Indicates the Interop Default Zone attribute state is disabled. Recommended Verify if the Interop Default Zone attribute state change was done on purpose. Action Severity - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 601
553 •AUDIT FICU System Messages 555 •AUDIT FW System Messages 557 •AUDIT HTTP System Messages 559 •AUDIT IPAD System Messages 561 •AUDIT PORT System Messages 563 •AUDIT SEC System Messages 565 •AUDIT SNMP System Messages 579 •AUDIT SULB System Messages 581 •AUDIT SWCH System Messages 593 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 602
- HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 603
AG System Messages 89 AG-1029 Message AUDIT, , [AG-1029], INFO, CFG, , , , F_Port to N_Port mapping has been updated for N_Port . Probable Cause Indicates that the F_Ports mapped to an N_Port have changed and the config file has been - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 604
89 AG-1029 546 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 605
Old value>] to []. Probable Cause Indicates that an authentication configuration value was set to a specified value. The data type is " Probable Cause Indicates that the secret database operation has been updated using the secAuthSecret command. Recommended No action is required. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 606
specified port is off, correct the switch policy configuration on either of the switches using the authUtil command, and then enable the port on the neighboring switch run the supportSave command and contact your switch service provider. Severity INFO 548 Fabric OS Message Reference 53-1001157- - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 607
automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity INFO AUTH-3008 Message AUDIT, , [AUTH- location>, , Event: , Status: failed, Info: Port has been disabled due to authentication failure with code '< - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 608
90 AUTH-3008 550 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 609
string describes the class of configuration parameters that were downloaded. If admin domain (AD) is enabled, the AD number is Downloading configuration without disabling the switch was unsuccessful. Probable Cause The system attempted to download a configuration without disabling the switch - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 610
91 CONF-1022 552 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 611
event-location>, , An IPsec/IKE policy was added. Probable Cause Indicates that an IPsec/IKE policy was added and the config file was updated. Recommended No action is required. Action Severity INFO FCIP-1003 Message AUDIT, , [FCIP-1003], INFO, CFG, , - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 612
92 FCIP-1003 554 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 613
, , [FICU-1011], INFO, CFG, , , , FMS mode has been enabled. Probable Cause Indicates the FICON Management server mode has been enabled. Recommended No action is required. Action Severity INFO FICU-1012 Message AUDIT, , [FICU-1012 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 614
93 FICU-1012 556 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 615
, , , , Event: , Status: success, Info: Probable Cause Indicates that Port Fencing was enabled/disabled successfully. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 557 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 616
94 FW-3001 558 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 617
-1002 Message AUDIT, , [HTTP-1002], INFO, ZONE, , , , Zoning transaction initiated by User: , Role: completed successfully. Probable Cause Indicates that the zoning database has been changed. Recommended Verify that the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 618
95 HTTP-1003 560 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 619
[IPAD-1002], INFO, CFG, , , , Switchname has been successfully changed to . Probable Cause Indicates that a change with the switch name has occured. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 561 53 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 620
96 IPAD-1002 562 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 621
], INFO, CFG, , , , Configuration changed for port (ID: ) in No_Module or No_Light state. Probable Cause Indicates the configuration changes were made to an offline port in No_Module or No_Light state. Recommended No action is required. Action - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 622
97 PORT-1009 Probable Cause Indicates a GigE port has been disabled. Recommended No action is required. Action Severity INFO 564 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 623
>, Status: success, Info: Security mode on the fabric. Probable Cause Indicates the configurations server (FCS) failover. • A security policy has been activated. • A security policy has been saved. • A security policy has been aborted. • A non-FCS password - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 624
, , , , Event: , Status: success, Info: Removed members from policy . Indicates a user has removed the specific members from the specified security policy. Note: If you use a wildcard (for example, an asterisk) in - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 625
, Event: , Status: success, Info: FCS member moved from position to . Probable Cause Indicates the fabric configuration server (FCS) list has been modified. One of the members of the list has been moved to a new position in the list, as identified in - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 626
Set or Reset> on domain [] for account []. Probable Cause Indicates a user has reset the password for the specified user accounts. Recommended Action Verify the password was intentionally reset. If the password was intentionally reset, no action is required. If the - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 627
server for AAA services. Probable Cause Indicates a user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify the RADIUS configuration was changed intentionally. If the RADIUS configuration was intentionally changed, no action - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 628
user has changed the remote authentication dial-in user service (RADIUS) configuration. Recommended Action Verify the RADIUS configuration was intentionally changed. If the RADIUS configuration login attempt via . 570 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 629
failed, Info: Failed login attempt via . Probable Cause Indicates a failed login attempt occurred. Recommended Info: Account [] locked, failed password attempts exceeded. Probable Cause Indicates the maximum number of failed password entries has been - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 630
3024], INFO, SECURITY, , , , Event: , Status: success, Info: User account [], password changed. Probable Cause Indicates the user's password was changed. Recommended Action Verify the security event was planned. If the security event - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 631
-3028], INFO, SECURITY, , , , Event: , Status: success, Info: User account [] deleted. Probable Cause Indicates the specified user account was deleted. Recommended Action Verify the security event was planned. If the security event - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 632
event-location>, , Event: , Status: success, Info: Switch is configured to database. Probable Cause , Status: success, Info: Fabric wide configuration set to . Probable Cause Indicates the specified event has - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 633
SEC-3035], INFO, SECURITY, , , , Event: ipfilter, Status: success, Info: IP filter policy(ies) saved. Probable Cause Indicates the specified IP filter policies have been saved. Recommended Action Verify the security event was planned. If - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 634
. Probable Cause Indicates a security violation was reported. The IP address of the unauthorized host is displayed in the message. Recommended Check for unauthorized access to the switch through the specified protocol connection. Take Action appropriate action as defined - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 635
initiator-details>, , RBAC permission denied for CLI : . Probable Cause Indicates the user does not have permission to execute this command. Recommended Verify the user has the required permission to execute this command. Action Severity INFO Fabric OS Message Reference - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 636
98 SEC-3048 SEC-3048 Message AUDIT, , [SEC-3048], INFO, SECURITY, , , FIPS mode has been enabled in the system using force option. Probable Cause Indicates the system has been forced to FIPS mode. Recommended Action Verify the security event - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 637
. Probable Cause Indicates that the simple network management protocol (SNMP) configuration s incorrect and the SNMP service will not work correctly. Recommended Reset the SNMP configuration to default. Action Severity ERROR SNMP-1005 Message Probable Cause AUDIT, , [SNMP - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 638
99 SNMP-1006 580 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 639
. Do not fail over or power down the system during firmware upgrade. Run the firmwareDownloadStatus command for more information. Severity WARNING SULB the firmwareDownload command has completed successfully and switch firmware has been updated. Recommended Action No action is required. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 640
failed on Standby CP." "firmwareCommit failed on Standby CP." "firmwareDownload failed." "firmwareDownload failed due to IPC error." "Unable to check the firmware version on Standby CP due to IPC error." "firmwareDownload failed due to IPC error." "firmwareDownload failed due to IPC error." "Standby - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 641
secondary partition. Please use firmwareDownloadStatus and firmwareShow to see firmware status." "firmwareDownload has started on Standby CP. up." "Standby CP booted up with new firmware." "Standby CP failed to boot up with new firmware." "firmwareDownload has completed successfully on Standby CP." - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 642
started to restore the secondary partition." 0x93 "firmwareCommit failed." 0x94 "The secondary partition has been restored successfully." 0x95 "Firmware is being downloaded to the blade. This step may take up to 10 minutes." 0xa0 "firmwareDownload timed out." 0xa1 "Reboot occurred during - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 643
. Check whether the switch is supported by the requested firmware. Also check firmwareDownload help page for other possible failure reasons." 0x12 "The RPM package database is inconsistent. Contact your service provider for recovery." 0x13 "Out of memory." 0x14 "Failed to download RPM package - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 644
messages: 0x15 - Failed to download Red Hat package manager (RPM) package. If this error occurs immediately after firmwareDownload is started, the firmware on the switch may be two releases older than the requested firmware. firmwareDownload supports firmware upgrades within two feature releases - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 645
before proceeding. 0x29 - The pre-install script failed. This error may be caused firmware packages on the file server, then retry firmwareDownload. If the problem switch, when firmwareDownload fails, the command will synchronize the firmware on the two partitions of each CP by starting a firmware - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 646
firmwareDownload single mode (-s) to upgrade the firmware on the standby CP to the same version as the active CP. Then retry firmwareDownload to download the desired version of firmware onto the CPs. Refer to the Fabric OS Administrator's Guide for troubleshooting information. Severity INFO SULB - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 647
blade to trigger another firmwareDownload. If the problem persists, contact your switch service provider. Severity ERROR SULB-1021 Message AUDIT, , [SULB-1021], WARNING, FIRMWARE, , , , Firmware is being downloaded to the blade in slot - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 648
command to monitor the progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1024 Message AUDIT, , [SULB-1024], WARNING, FIRMWARE, , , , Firmware commit has completed on the blade in slot - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 649
command to monitor progress. If the problem persists, contact your switch service provider. Severity WARNING SULB-1031 Message AUDIT, , [SULB-1032], WARNING, FIRMWARE, , , , Relocating an internal firmware image on the CP. Probable Cause - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 650
to be relocated again. If the problem persists, Action contact your switch service provider. Severity ERROR SULB-1037 Message AUDIT, , [SULB-1037], ERROR, FIRMWARE, , , , HCL failed. Reboot the switch manually using the reboot command. However - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 651
-initiator-details>, , , Trunk Area () has been enabled for one or more ports. Probable Cause Indicates a Trunk Area has been enabled for one or more ports and the config file has been updated. Recommended No action is required. Action Severity INFO SWCH-1013 Message - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 652
101 SWCH-1014 594 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 653
[UCST-1021], INFO, CFG, , , , In-order delivery option has been enabled. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No action is required - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 654
INFO, CFG, , , , In-order delivery option has been enabled with Lossless-DLS option. Probable Cause Indicates the IOD option has been enabled for the switch. This option guarantees in-order delivery of frames during topology changes. Recommended No action - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 655
Severity INFO 102 UCST-1027 Fabric OS Message Reference 597 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 656
102 UCST-1027 598 Fabric OS Message Reference 53-1001157-01 - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 657
zone object member or members were added to that new zone object set. The zone object type can be "alias", "zone member", "zone" or "zone configuration". The string "..." appears at the end of the zone object member list if the list was truncated in the message. Recommended Verify the event was - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 658
member or members have been removed from the specified zone object set. The zone object type can be "alias", "zone member", "zone" or "zone configuration". The string "..." appears at the end of the zone object member list if the list was truncated in the message. Recommended Verify the event was - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 659
event-initiator-details>, , , Event: , Status: success, Info: Zone configuration \"\" enabled. . Probable Cause Indicates the specified zone configuration has been enabled. Recommended Verify the event was planned. If the event was planned, no - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 660
103 ZONE-3011 Severity INFO ZONE-3011 Message AUDIT, , [ZONE-3011], INFO, ZONE, , , , Event: , Status: success, Info: Zone object \"\" expunged. Probable Cause Indicates the specified zone object has been expunged - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 661
, Event: , Status: success, Info: All AD definitions cleared. Probable Cause Indicates all admin domain (AD) definitions and all zone configurations under them have been cleared. Recommended Verify the event was planned. If the event was planned, no action is required. If the event was - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 662
103 ZONE-3018 ZONE-3018 Message AUDIT, , [ZONE-3018], INFO, FABRIC, , , , Event: , Status: success, Info: has been deactivated. Probable Cause Indicates the specified admin domain (AD) object has been deactivated. - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 663
INFO, FABRIC, , , , Event: , Status: success, Info: Current AD configuration saved to flash. Probable Cause Indicates the current admin domain (AD) configuration has been saved to flash. Recommended Verify the event was planned. If the event was - HP StorageWorks 8/8 | Brocade Fabric OS Message Reference guide v6.2.0 (53-10011 - Page 664
103 ZONE-3025 Severity INFO 606 Fabric OS Message Reference 53-1001157-01
53-1001157-01
24 November 2008
Fabric OS
Message Reference
Supporting Fabric OS v6.2.0