HP StorageWorks 8B Web Tools User's Guide (Version 3.0)

HP StorageWorks 8B - FC Entry Switch Manual

Get HP StorageWorks 8B - FC Entry Switch PDF manuals and user guides View all HP StorageWorks 8B manuals
Add to My Manuals
Save this manual to your list of manuals

HP StorageWorks 8B manual content summary:

  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 1
    user's guide version 3.0 web tools www.hp.com
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 2
    , duplication, or disclosure by government is subject to restrictions as set forth in subdivision (c) (1) (ii) of the Rights in Technical service names are or may be trademarks or service marks of, and are used to identify products of services of their respective owners. Safety notices Any servicing
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 3
    of Web Tools 1-1 Capabilities of Web Tools 1-2 Web Tools Main Views 1-3 Chapter 2 Installing Web Tools Requirements 2-1 Switch Requirements and Compatibility 2-1 Workstation Requirements 2-1 Installation 2-2 Installing a Web Browser 2-2 Configuring the Web Browser 2-2 Installing the Java
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 4
    Switch Events View 4-4 Fabric Watch View 4-8 Alarm Notifications Tab 4-8 Configure Thresholds 4-10 Current Settings Tab 4-17 Performance Monitor 4-17 Graph Types 4-19 Performance Monitor Menus 4-20 Performance Graphs Menu 4-27 Additional Options 4-37 4-38 ii Fabric Manager User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 5
    Administrative Interface 4-38 Switch Settings Tab 4-40 User Admin Tab 4-42 Firmware/Configuration File Administration Tab 4-43 SNMP Tab 4-45 License Administration Tab 4-47 Remote Switch Tab (Optional Software 4-49 QuickLoop Tab 4-50 Configure Tab 4-53 Extended Fabric Tab (Optional Software
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 6
    iv Fabric Manager User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 7
    configuring and using Web Tools Port View. Related Publications Related product information can be found in the following publications. Provided with the FC Entry Switch 8B and FC Switch 8B: • HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Getting Started Guide (A7346-90902) • HP
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 8
    Web site at http://www.hp.com/support/fc8B: • HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Getting Started Guide (A7346-90902) • HP Surestore FC 1Gb/2Gb Entry Switch 8B and FC 1Gb/2Gb Switch 8B Installation and Reference Guide • Fabric OS Reference Manual, version 3.0 • Fabric OS
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 9
    the supportShow telnet command • Detailed description of the problem • Topology configuration • Troubleshooting steps already performed Getting Software Updates For information on obtaining software updates contact your HP account representative or technical support. Web Tools User's Guide vii
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 10
    viii Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 11
    results than can be achieved strictly through a Command Line Interface. Following are some of the features that make Web Tools an important part of the switch management and administration process: • Web Tools can be used simultaneously with Telnet commands. Simply open a second window and you can
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 12
    . See Administrative Interface on page 4-38, the Switch Settings Tab on page 4-40, and the Current Settings tab in the Fabric Watch View on page 4-17. Use the ability to upgrade Fabric OS and license key administration. See Firmware/Configuration File Administration Tab on page 4-43. Use report
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 13
    Settings tab in the Fabric (frames in, frames out) and error counts. Watch View on page 4-17. Web Tools Main Views Web Tools Tools are: 1. Fabric View 2. Switch View 3. Port Information View Initial Display Upon Launching Web Tools: Fabric View Figure 1-1 Fabric View Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 14
    and Port Information View. It includes icons that display the status of the switch fans, temperature monitors, and beacon. For information about the functions that are accessible through the Switch View, see The items and information available in Switch View on page 4-2. 1-4 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 15
    Tools Accessible From Switch View: Port Information View Figure 1-3 Port Information View 3. Port Information View Displays statistics and status for the selected port, GBIC, or loop. Accessed by selecting the icon for the relevant port in Switch View on page 5-1. Web Tools User's Guide 1-5
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 16
    1 Introducing Web Tools 1-6 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 17
    information about configuring HP Brocade 2400/2800, FC 6164, FC Entry Switch 8B, FC Switch 8B, and FC 16B switches to operate in the same fabric, contact your switch supplier. Workstation Requirements The following items are required for the correct installation and operation of Web Tools: • One
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 18
    one of the supported Web browsers on the workstation, if not already installed. • Configuration of the Web browser for use with Web Tools. • Installation of the required Java plug-in on the workstation, if not already installed. Installing a Web Browser If not already installed, install one of the
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 19
    Configuring Internet Explorer Correct operation of Web Tools with Internet Explorer requires clearing the browser cache after installation, and specifying the appropriate settings to ensure the correct operation of the Switch Admin feature. To set the refresh frequency: 1. Select Internet Options
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 20
    2 Installing Web Tools To install the Java plug-in on Solaris: 1. Locate the Java plug-in on the internet, such as at the Sun Microsystems Web site. 2. Follow the instructions to install the Java plug-in for Solaris. 3. Open the .cshrc file and set the path to the Java plug-in executable file. For
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 21
    2 Installing Web Tools To launch Web Tools: 1. Launch the Web browser. 2. Enter the switch name or IP address in the Location/Address field (Example: http://switch name/) and press . Web Tools launches, displaying the default view, Fabric View. Web Tools User's Guide 2-5
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 22
    2 Installing Web Tools 2-6 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 23
    1. Launch Web Tools See Launching Web Tools on page 2-4 for more information. The Fabric View displays by default. Note: This switch is assumed to be the local domain. For information specific to a QuickLoop to be available, the QuickLoop switch must be the host domain. Web Tools User's Guide 3-1
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 24
    of two logical parts: • Control Panel • Switch Panel Control Panel Switch Panel Control Panel Switch Panel Figure 3-1 Detailed View of Fabric View To see the Summary view of the Fabric View, select the Summary View button on the left side of the Fabric View. 3-2 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 25
    configuration of the fabric from the perspective of the "local domain" (the domain of the switch entries listed in the Simple Name Server database. Select to open Name Server Table View (for additional information, refer to the Name Server Table View in this document). Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 26
    , see Switch View). Events Select to open Switch Events View to display the switch events log (for information about this view, see Switch Events View). Admin Select to open Switch Administration View (for information about this view, see Administrative Interface). 3-4 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 27
    last successful status check. The name of the switch. Version of Fabric OS installed on the switch. A number that uniquely identifies the switch within the fabric. Ethernet IP address. Ethernet , select the column header. To resize a column, drag the column divider. Web Tools User's Guide 3-5
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 28
    (number) Time Count Level Message Name of switch. Event number for affected switch. Time of event. Number of consecutive occurrences of same event. Severity level of event: 0 panic (switch reboots) 1 critical 2 error 3 warning 4 information 5 debug Description of event. 3-6 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 29
    3 Fabric View Fabric Topology View The Fabric Topology View summarizes the physical configuration of the fabric from the perspective of the "local domain" (the domain of the switch entered as a URL in the Web browser). This includes information about the "destination domains" (all other domains in
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 30
    in the fabric. A number that uniquely identifies the local switch within the fabric, and the name of the switch. A number that uniquely identifies the switch within the fabric, and the name of the switch. Active Paths: This line is followed by information about each destination domain, including
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 31
    Auto Refresh is checked, enter the number of seconds for the refresh interval. Select to refresh the window immediately. Select to close the window. Web Tools User's Guide 3-9
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 32
    name of the device node. The symbolic name of the device assigned through the SCSI INQUIRY command. The Fibre Channel FC4 layer types supported by the device, such as IP or FCP. The Fibre Channel classes of service supported by the device. The name of the fabric port in use by the device. The
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 33
    information specific to QuickLoop to be available, the QuickLoop switch must be the local domain. Figure 3-6 Zoning Configuration For more information about configuring Zoning, see the Zoning User's Guide. A description of each of the zoning schemes is shown in Table 3-1. Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 34
    configuration file operations must be on WWNs. Aliases, zones and configuration configuration file operations must be on AL_PA in a QuickLoop. Aliases, zones and configuration configuration file. This mode doesn't allow specification of a LUN. Note: If a switch in the Switch/Port Level to configure
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 35
    . If a switch is added, all ports on the switch are added. To add a device WWN, select either a node WWN (folder icon) or port WWN (blue circle icon) from the WWN sub-tree. Remove Mem Select to remove the member selected from the Alias Name Members Selection list. Web Tools User's Guide 3-13
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 36
    a WWN with another one in all Aliases, Zones defined. Applies the changes to the switch and exits the frame. Select to apply all changes made since the Zone Administration View any changes to the switch. Select to clear all Aliases, Zones, Configs locally on the switch. 3-14 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 37
    in the Zone Name field. Deleting a zone automatically removes it from all zone configurations. Rename Zone Select to edit the name of the zone selected in the Zone zone members, including switches, ports, WWNs, List aliases, and QuickLoop AL_PAs, and Fabric Assists. Web Tools User's Guide 3-15
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 38
    a WWN with another one in all Aliases, Zones defined. Applies the changes to the switch and exits the frame. Click to apply all changes made since the Zone Administration View any changes to the switch. Click to clear all Aliases, Zones, Configs locally on the switch. 3-16 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 39
    , zones, and zone configurations, including the associated AL_PAs. Click to edit the name of the QuickLoop selected in the QuickLoop Name field. A dialog displays in which you can edit the name of the QuickLoop. A list of the switches available to add to the QuickLoop. Web Tools User's Guide 3-17
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 40
    List based on the type of objects displayed in that list. Click to add the switch selected in the Switch Selection List to the QuickLoop Members list. Click to remove the selected member from the Administration View was opened and to exit the Zone Administration View. 3-18 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 41
    in Figure 3-11. Figure 3-10 The Port Fabric Assist tab of the Switch/Port Level Zoning menu Following is a description of the fields on the Port Fabric Assist automatically removes it from all aliases, zones, and zone configurations, including the associated AL_PAs. Click to edit the name of the
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 42
    as "null Members". Click to refresh the local zoning data base copied from the switch. This button automatically flashes red/gray if the fabric zoning data is changed by another to the switch. Click to clear all Aliases, Zones, Configs, FA Zones locally on the switch. 3-20 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 43
    of the zones and QuickLoops available to add to the configuration. Click to add the switch selected in the Zone/QLoop Selection List to the Config a Switch name, WWN, Alias, Zone, QuickLoop in the Member Selection List based on the type of objects displayed in that list. Web Tools User's Guide 3-21
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 44
    the changes to the switch. Some of the potential errors it might catch are: • Ports/WWNs/Devices that are part of the selected configuration, but not part of the fabric. • Zones with only a single member. The Zoning Configuration Analyze screen is shown in Figure 3-12. 3-22 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 45
    configuration files. After selecting the WWN Level Zoning button from the Zoning Selection menu and clicking OK, the WWN Level Zoning menu displays. Following is a list of the tabs provided in the WWN Level Zoning menu: • WWN Alias • WWN Zone • Quick Loop • WWN Fabric Assist • WWN Config Web Tools
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 46
    3 Fabric View WWN Aliases Use the WWN Alias tab to configure WWN Aliases. Figure 3-13 shows the WWN Alias tab. Figure 3-13 all zones. Member Selection List A list of potential alias members, including switches, ports, WWNs, and QuickLoop AL_PAs, and Fabric Assists. 3-24 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 47
    in all aliases, zones defined. Click to apply the changes to the switch and exit the window. Click to apply the changes to the switch. Click to exit the window without making any changes to the switch. Click to clear all aliases, zones, configs locally on the switch. Web Tools User's Guide 3-25
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 48
    rename a zone member. Member Selection List This field displays a list of potential zone members, including switches, ports, WWNs, and QuickLoop AL_PAs, and Fabric Assists. Zone Members This field lists the zone is not selected, the name displays as "null Members". 3-26 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 49
    locally on the switch. Quick Loop You can use the QuickLoop tab to create and manage QuickLoops if used in conjunction with Zoning. For information on managing the QuickLoop feature separately, see Loop Tab in this document. The Quick Loop tab is shown in Figure 3-15. Web Tools User's Guide 3-27
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 50
    Create Qloop Delete Qloop Rename Qloop Switch Selection List QuickLoop Members Search Mem list of potential QuickLoop members, including switches, ports, WWNs, and QuickLoop AL_PAs, displays as "null Members". Click to search for a Switch name, WWN, Alias, Zone, QuickLoop in the Member Selection
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 51
    the switch. WWN Fabric Assist Use the WWN Fabric Assist tab to create and manage WWN Fabric Assists. A QuickLoop license is required to use this tab. The WWN Fabric Assist tab is shown in Figure 3-17. Figure 3-16 WWN Fabric Assist tab of the WWN Level Zoning Menu Web Tools User's Guide 3-29
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 52
    Assist automatically removes it from all aliases, zones, and zone configurations, including the associated AL_PAs. Click to edit the name of ". Click to refresh the local zoning data base copy from the switch. This button would automatically flash red/gray if the fabric zoning Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 53
    Close Clr All Select OK to the changes to the switch and exit the window. Click to apply all changes made existing WWN configuration name to be modified. Click to create a new WWN configuration. Click to delete a WWN configuration. Click to rename a WWN configuration. Web Tools User's Guide 3-31
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 54
    This field displays a list of Zone and QuickLoop members available to add to the WWN configuration. Click to add a member from the config members list into the zone selection list. changes to the switch. Click to clear all Aliases, Zones, Configs locally on the switch. 3-32 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 55
    menu: • Device Alias • Device Zone • QuickLoop • Device Config AL_PA Device Alias Use the AL_PA Device Alias tab to create and manage QuickLoop configurations. QuickLoop configurations are used to enable or disable a group of zones at the same time. The AL_PA Device Alias tab is shown in Figure 3-18
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 56
    . OK Click to apply the changes to the switch and exit the switch. Apply Click to apply the changes to the switch. Close Click to exit the window without making any changes to the switch. Clr All Click to clear all aliases, zones, configs locally on the switch. 3-34 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 57
    List This field displays a list of potential zone members, including switches, ports, WWNs, and QuickLoop AL_PAs, and Fabric Assist. Zone , the name displays as "null Members." Search Mem Click to search for a Switch name, WWN, Alias, Zone, QuickLoop, in the Member Selection List based on
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 58
    the switch. Quick Loop Use the Quick Loop tab to create and manage Quick Loops. For information on managing the Quick Loop feature separately, see Loop Tab in this document. The Quick Loop tab is shown in Figure 3-20. Figure 3-20 Quick Loop tab of the AL_PA Level Zoning menu 3-36 Web Tools User
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 59
    the aliases, zones defined. Click to replace WWN with another one in all aliases, zones defined. Click to apply the changes to the switch and exit the switch. Click to apply the changes to the switch. Click to exit the window without making any changes to the switch. Web Tools User's Guide 3-37
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 60
    into the Configuration Member List. Click to remove a member from the Zone Selection List into the Configuration Member List. Click to search for a Switch name, WWN, Alias, Zone, Qloop in the Member Selection List based on the type of objects displayed in that list. 3-38 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 61
    switch. Click to apply all changes made including changes made on other tabs in the view. Changes cannot be cancelled once they are applied. Click to exit the window without making any changes to the switch. Click to clear all Aliases, Zones, Configs locally on the switch. Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 62
    . Following is a list of the tabs provided in the Mixed Level Zoning menu: • Alias • Zone • QuickLoop • Fabric Assist • Config Alias Use the Alias tab to set up mixed aliases. The Alias tab is shown in Figure 3-22. Figure 3-22 Alias tab of the Mixed Level Zoning menu
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 63
    . OK Click to apply the changes to the switch and exit the window. Apply Click to apply the changes to the switch. Close Click to exit the window without making any changes to the switch. Clr All Click to clear all aliases, zones, configs locally on the switch. Web Tools User's Guide 3-41
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 64
    Selection List This field displays a list of potential zone members, including switches, ports, WWNs, and QuickLoop AL_PAs, and Fabric Assists. Zone name displays as "null Members". Search Mem Click to search for a Switch name, WWN, Alias, Zone, QuickLoop, in the Member Selection List based on the
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 65
    in all aliases, zones defined. Click to apply the changes to the switch and exit the switch. Click to apply the changes to the switch. Click to exit the window without making any changes to the switch. Click to clear all aliases, zones, configs locally on the switch. Web Tools User's Guide 3-43
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 66
    information on managing the Quick Loop feature separately, see the Loop Tab on page 5-8 in this document. The Quick Loop tab is shown in Figure 3-24. Figure 3-24 Quick Loop tab of the Mixed Level Zoning menu 3-44 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 67
    all aliases, zones defined. Click to apply the changes to the switch and exit the window. Click to apply the changes to the switch. Click to exit the window without making any changes to the switch. Select to clear all Aliases, Zones, and Configs locally on the window. Web Tools User's Guide 3-45
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 68
    Click to delete the Fabric Assist selected in the FA Name field. Deleting a Fabric Assist automatically removes it from all aliases, zones, and zone configurations, including the associated AL_PAs. Click to edit the name of the Fabric Assist selected in the FA Name field. This field displays a list
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 69
    as "null Members". Click to refresh the local zoning data base copied from the switch. This button automatically flashes red/gray if the fabric zoning data is changed by another to the switch. Click to clear all Aliases, Zones, Configs, FA Zones locally on the switch. Web Tools User's Guide 3-47
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 70
    . Click to rename a configuration. A list of Zone/QuickLoop members available to add to the configuration. Click to add a member from the Zone Selection list into the Config Member list. Click to remove a member from the Config Members list into the Zone Selection list. 3-48 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 71
    on the name of the configuration selected. If a configuration is not selected, the name displays as "null Members". Click to analyze the configuration that is selected along with to the switch. Select to clear all Aliases, Zones, and Configs, locally on the window. Web Tools User's Guide 3-49
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 72
    3 Fabric View 3-50 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 73
    . 2. Enter the switch name or IP address in the Location/Address field and press Enter. (Example: http://switch name/) Web Tools launches, displaying Fabric View. 3. Click the Switch icon. The Switch View displays as shown in Figure 4-1. Figure 4-1 The Switch View Web Tools User's Guide 4-1
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 74
    not online; check cable connections. Slowly flashing yellow - Disabled (diagnostics or portDisable command). Rapidly flashing yellow - Error, fault with port. Steady green cable). - supply absent or not fully plugged in. Click to view the switch's health status. 4-2 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 75
    View Click to access Switch Events View. Telnet Fabric Watch Click to launch a telnet session. Click to access Fabric Watch faulty readings) Gray - Unknown or unmonitored Click to display the Administrative Interface where you can perform switch management functions. Web Tools User's Guide 4-3
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 76
    or IP address in the Location/Address field and press Enter. (Example: http://switch name/) Web Tools launches, displaying Fabric View. 3. Click the Switch icon. The Switch View displays. 4. Click the Events icon. The Switch Events View displays as shown in Figure 4-2. 4-4 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 77
    View. Switch Name of switch. Num... Event number. Time Count Level Time of event. Number of back-to-back occurrences of same event. Severity level of event: 0 panic (switch reboots) 1 critical 2 error 3 warning 4 information 5 debug Message Description of event. Web Tools User's Guide 4-5
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 78
    4 Switch View Loop Diagnostics Dialog Box The Loop Diagnostics Dialog Box dialog appears when you click DIAG on the Loop tab of the Port description of the fields in the LIP dialog box: Apply Close Click to initialize a loop port. Click to close the LIP dialog box. 4-6 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 79
    4 Switch View Bypass Dialog Box Use the Bypass option to bypass an AL_PA (a device) on the loop port. To access this option, click Bypass on the will enable all the AL_PAs in the loop. Click to enable the AL_PA (must be valid AL_PA). Click to close Enable an AL_PA window. Web Tools User's Guide 4-7
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 80
    use Fabric Watch View to monitor fabric elements for potential problem conditions. For detailed information about Fabric Watch, see the Fabric Watch User's Guide. To access Fabric Watch View: 1. Launch the Web browser. 2. Enter the switch name or IP address in the Location/Address field and press
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 81
    4 Switch View Figure 4-7 The Alarm Notifications tab in the Fabric Watch View Web Tools User's Guide 4-9
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 82
    thresholds for the Fabric Watch class currently selected in the organizational tree on the left side of the window. The Configure Thresholds tab is shown in Figure 4-8. Figure 4-8 The Configure Threshold tab with the Environment class selected in the Fabric Watch View 4-10 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 83
    Switch View The Configure Threshold display changes according to the class and area selected in the organizational tree. However, the Configure Thresholds tab always contains the following buttons: Default Apply Click to return settings Click to undo the last changes. Web Tools User's Guide 4-11
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 84
    Switch View Thresholds for the Environmental Classes The Environmental classes are displayed by selecting the Environmental file from the separate column left of the Configure want to set the specified threshold. Area Select checkbox Select a Fabric Watch area to configure. Only Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 85
    4 Switch View Thresholds for the Remaining Classes The Port, E_Port, F/FL Copper Port, F/FL Optical Port The thresholds for the Port class are displayed as shown in Figure 4-10: Figure 4-10 The Configure Threshold tab with the Port class selected in Fabric Watch View Web Tools User's Guide 4-13
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 86
    selected in the organizational tree on the left side of the window. Note: The Configure Threshold Tab applies only to L-Ports. The Configure Threshold tab is shown in Figure 4-11. Figure 4-11 Configure Threshold tab with AL_PA class selected in Performance View 4-14 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 87
    4 Switch View Use the Configure Thresholds tab to view and configure End-to-End thresholds for the Performance document, or the Performance Monitor User's Guide. The Configure Thresholds tab for End-to-End Thresholds is shown in Figure 4-12. Figure 4-12 Configure Threshold tab with End-to-End
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 88
    4 Switch View Use the Configure Thresholds tab to view and configure Filter-based thresholds for the Performance this document, or the Performance Monitor User's Guide. The Configure Thresholds tab is shown in Figure 4-13. Figure 4-13 Configure Threshold tab with Filter-based class selected in
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 89
    . • Provides the ability to change the configuration of a switch or port visually by using the graphics. Guide. To access the Performance Monitor: 1. Launch the Web browser and enter the switch name or IP address in the Location/Address field. (Example: http://switch name/) 2. Press Enter. Web Tools
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 90
    the graph to the size of the display. number, SID/DID pair, AL_PA, or switch domain number). • Graphs are displayed on maximized to occupy the entire canvas. The size of the graphs on the canvas is determined stored for later retrieval on the switch. Up to 20 individual canvases can be saved. Each
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 91
    4 Switch View • Any graph can "Zoom In", or be magnified and detached from the of choice. Graph Types Figure 4-16 through Figure 4-18 shows four types of graphs used to display port and switch information. Table 4-2 and Table 4-3 describe the graphs that can be displayed on a canvas. All graphs are
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 92
    4 Switch View Figure 4-17 Horizontal Bar Chart Example Figure 4-18 Line Chart Example Performance Monitor Menus The Performance Monitor is made up of two main menus: • Actions • Performance Graphs 4-20 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 93
    Configurations Window The following are descriptions of the fields available using Display Canvas Configurations. The Load Canvas button Load Canvas Select to load a canvas of 1 to 8 graphs onto the Performance Monitor facility by choosing the highlighted canvas name. Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 94
    button: Figure 4-20 Load Canvas Example The Edit Canvas button Edit Canvas Select to make changes to a canvas or change configurations. An example of what you will see if you select the Edit Canvas button is shown in Figure 4-21: Figure 4-21 Edit Canvas Example 4-22 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 95
    4 Switch View The Edit Canvas option gives shown in Figure 4-22: Figure 4-22 Edit Canvas Data Entry Frame To choose the port and LUN that you want to graph or configure: 1. Double-click on the folder in the Port Selection four LUN numbers, a warning window will appear. Web Tools User's Guide 4-23
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 96
    Canvas Configuration menu: 1. Select the Performance icon (from the Switch View) 2. Select the Actions menu 3. Select the Save Current Canvas Configurations option The Canvas Configuration Save menu is shown in Figure 4-24. Figure 4-24 Canvas Configuration Save Menu 4-24 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 97
    the fields in the Save Current Canvas Configuration menu: Save Canvas Cancel Click to save the canvas to the switch flash. Click to cancel the window without the Resource Usage Display window: 1. Select the Performance icon (from the Switch View) 2. Select the Actions pull-down menu. 3. Select the
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 98
    4 Switch View Figure 4-26 Resource Usage Display window of the Actions pull-down menu The following selected canvas. To access the Print All Graphs window: 1. Select the Performance icon (from the Switch View). 2. Select the Actions pull-down menu. 3. Select the Print All Graphs option. 4-26 Web
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 99
    A dialog box appears, as shown in Figure 4-27. 4 Switch View Figure 4-27 Applet Dialog Box 4. Click Yes to accept The Basic Monitoring sub-menu allows you to create graphs that monitor the functionality of switches and ports, such as performance and traffic. Unlike the Advanced graphs, Basic graphs
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 100
    Switch Switch Aggregate Throughput Line Graph Displays the aggregate performance of all ports of a switch. See Figure 4-30. Switch Switch Switch Port Error Graph Line Displays a line of CRC errors for a given port. See Figure 4-33. Switch Switch all the ports on a switch. See Figure 4-35. Port
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 101
    Figure 4-30 Switch Aggregate Throughput Graph Example Switch Throughput Utilization Graph An example of a Switch Throughput Utilization Graph, displaying a sample of the port throughput, is shown in Figure 4-31. Figure 4-31 Switch Throughput Utilization Graph Example Web Tools User's Guide 4-29
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 102
    Switch View Port Error Graph When you select the Port Error Graph, you will be prompted to chose the port that you want to monitor for CRC errors. Figure 4-32 is an example of the data entry of a Port Error Graph, displaying a line of CRC errors for a given port, is shown in Figure 4-33.
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 103
    Graph Advanced Monitoring (Optional Software) The Advanced Monitoring is an optional licensed software. The Advanced Monitoring sub-menu allows you to create graphs that monitor switch and port functionality such as traffic and performance that is device-specific. Web Tools User's Guide 4-31
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 104
    Write per port. See Figure 4-39. Switch SCSI vs IP Graph Vertical Bar Shows percentage of SCSI vs IP frame traffic on each individual port. See Figure 4-40. Switch ALPA Error Graph Line Displays CRC errors for a given port and a given AL_PA. See Figure 4-42. 4-32 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 105
    Switch View SID/DID Performance Graph When you select the SID/DID Performance Graph, you will be prompted with a data entry window where you will chose the SID and DID to be charted. Figure 4-36 is an example of the data entry SID and a DID pair, is shown in Figure 4-37. Web Tools User's Guide 4-33
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 106
    4 Switch View Figure 4-37 SID/DID Performance Graph Example SCSI Commands Graph When you select the SCSI graph, the following options • SCSI Write per port. Each graph will prompt you with a data entry window to select the port and LUN to be monitored, as shown in Figure 4-38. Figure 4-38 SCSI Graph
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 107
    4 Switch View 2. Select the port that warning window will appear. 4. Select OK. A graph displaying the total number of Read and/or Write commands on a given port to a specific LUN will be displayed. An example of a SCSI graph, using traffic, is shown in Figure 4-40. Web Tools User's Guide 4-35
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 108
    Switch View Figure 4-40 SCSI vs IP Graph Example ALPA Error Graph When you select an ALPA Error Graph, you will be prompted to chose the port that you want to monitor for various errors. Figure 4-41 is an example of the data entry down list of SID/DID files will appear. 4-36 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 109
    4 Switch View 4. Select the ALPA number that you want to graph by using one of the Monitor feature provide additional options by using the following methods: • Right-clicking on a graph • Tools Tips These options are available by rolling over a graph with your mouse pointer Right-Click Options Each
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 110
    graph supports at least one Tools Tip. commands being written on a port or on a given port to a specific LUN. A0 dministrative Interface 4 The Administrative Interface provides access to the administrative functions though the following tabs: • Switch Settings Tab 4-38 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 111
    Figure 4-1 The Enter Network Password Dialog Box 4. Enter your user name and password. The logon account must have administrative privileges. 5. Click OK. The Administrative Interface displays, with the Switch Settings tab selected by default, as shown in Figure 4-2. Web Tools User's Guide 4-39
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 112
    . Switch Settings Tab Use the Switch Settings tab to manage basic switch setup for items such as switch name, switch domain ID and enabling and disabling the switch and compatibility modes. The Switch Settings tab is shown in Figure 4-2. Figure 4-2 Switch Settings Tab 4-40 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 113
    switch name. Enter a new name to change a name in this field. Displays or sets switch encoded address format mode (backward compatible to F16 switch). Displays the serial number of the switch. Click on the box to allow ports to be configured exit the Switch Admin view. the last set of committed
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 114
    4 Switch View User Admin Tab You can use the User Admin tab to change the switch User and Admin account names and passwords. The User Admin tab is shown in Figure 4-3. Figure 4-3 User Admin Tab 4-42 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 115
    tab to complete tasks such as • Download firmware • Boot the switch • Upload a Configuration file to the host • Download the configuration from a file to the switch • Reset the configuration to the default value • Select the protocol of downloading (FTP or RSH). Web Tools User's Guide 4-43
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 116
    of the configuration file to the switch using the specified filename (full path). The User and Password must be valid for the specified host, and the file path must be read-write capable by the user. Config Download Select the radio button to download the firmware. 4-44 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 117
    the switch community string, location, trap level and trap recipients. The SNMP tab is shown in Figure 4-5. Note: In order for the switches to send SNMP traps, you must first enter the Telnet command snmpMibCapSet. This enables the MIBs on all switches to be monitored. Web Tools User's Guide 4-45
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 118
    Name Displays or sets contact information for switch. Default is Field Support. Location Displays or sets the location of switch. Default is End User Premise. Description Displays or sets system description. Default is Fibre Channel Switch. Trap Level Sets severity level of switch events that
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 119
    Control List Configuration Access Host to the last set of committed changes. install license keys that are provided. You can use the table within the Licence Administration tab to remove a listed license from the switch. The License Administration tab is shown in Figure 4-6. Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 120
    tab: Feature License Key Add Remove Close Reset A list of the licenses installed on the switch. Enter license key to be added or removed. Check to add the or Remove button will be lost. Click to reset the tab to the last set of committed changes. If the Apply button has not been pressed on this tab
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 121
    an active Remote Switch license in both switches. For detailed information on the Remote Switch feature, see the Distributed Fabrics User's Guide. Use the Remote Switch tab to manage the Remote Switch option. This tab displays only when the Remote Switch is installed. The Remote Switch tab is shown
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 122
    Switch box displays. Click to reset the tab to the last set of committed changes. If the APPLY button has not been Use the QuickLoop tab to manage QuickLoop configuration. For information about managing the features Guide. The QuickLoop tab is shown in Figure 4-8. 4-50 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 123
    the port numbers. Enabled Check box to enable a port for QuickLoop, or uncheck to disable the port for QuickLoop. Local Switch Port Lists the ports connected to the local switch. Local Switch AL_PAs Lists the AL_PAs of devices connected to the local switch. Web Tools User's Guide 4-51
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 124
    ports connected to a remote switch. Lists the AL_PAs of devices connected to a remote switch. This information displays if a partner is configured. Click to save the a dialog box displays. Click to reset the tab to the last set of committed changes. If the APPLY button has not been pressed on this
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 125
    , Virtual Channel Parameters, Arbitrated Loop Parameters and Systems Services. The valid values for each editable field are provided in the Fabric OS Manual description of the "configure" command. The Configure tab is shown in Figure 4-9. Figure 4-9 Configure Tab Web Tools User's Guide 4-53
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 126
    Switch View The following is a description of the fields on the Configure tab: BB Credit E_D_TOV R_A_TOV Datafield Size Non-SCSI Tachyon Mode Per-Frame Routing Priority Suppress Class F Traffic Disable Device Probing VC Encoded box to enable rapid system service. Dynamically enables or disables a
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 127
    displays. Click to reset the tab to the last set of committed changes. If the Apply button has not been installed on the switch. For ports that are disabled, the rows appear grayed-out in the table within the Extended Fabric tab. The Extended Fabric is shown in Figure 4-10. Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 128
    Switch View Figure 4-10 Extended Fabric Tab Following is a description of the fields on the Extended Fabric tab: Port Number Port Number being used for the Extended Fabric. Long Distance Setting Click to view Long Distance settings reset the tab to the last set of committed changes. If the Apply
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 129
    the switch. Both Ethernet and FC IP networking is configured and the SYSLOG daemon message recipients. The Network Configuration tab is shown in Figure 4-11. Figure 4-11 Network Configuration Tab Syslog IP/~6 Displays six Syslog IP addresses for a user to configure. Web Tools User's Guide 4-57
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 130
    displayed. Port Settings Tab Use the Port Settings tab to disable/enable ports on the switch. This tab is also used to set port speed to 1GB/2GB Autosense as well as enable/disable Trunking. The Port Settings tab is shown in Figure 4-12. Figure 4-12 Port Settings Tab 4-58 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 131
    Switch View Following is a description of the fields on the Port Settings to disable ports on the switch. Click to display the current (N2G). If the speed is set to negotiate, the speed will negotiate. If the speed is set to negotiate, the speed the tab to the last set of committed changes. If
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 132
    4 Switch View Routing Tab The Routing tab is used to set the link cost for the selected ports and static route. The Routing tab is shown in Figure 4-13. Figure 4-13 Port Number. Use the Cost field to change the link cost for a particular tab. Displays In Port number. 4-60 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 133
    Destination Out Port OK Apply Close Reset 4 Switch View Displays the destination domain ID for the "comma- by clicking the Apply button, a dialog box displays. Click to reset the tab to the last set of committed changes. If the Apply button has not been pressed on this tab, the parameters are
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 134
    4 Switch View Trunk Information Tab The the Trunk Information tab is a read-only tab and, has only the Close button function. . The Trunk 4-14 Trunking Tab Following is a description of the fields on the Trunk Information tab: Close Click to exit the current tab. 4-62 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 135
    generated by clicking on the corresponding link on the Configure tab in the Switch Administrative window. This report provides information about all the switches, interswitch links and ports in the Fabric. The Report tab is shown in Figure 4-15. Figure 4-15 Report Tab Web Tools User's Guide 4-63
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 136
    the Location/Address field and press Enter. For example: http://switch name/. Web Tools launches, displaying Fabric View. 3. Click the Telnet icon on the switch panel. If a Telnet session is already active, the following in Figure 4-17. Figure 4-17 The Telnet Interface 4-64 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 137
    4 Switch View 5. Enter your user name and password (the account used must have administrative privileges). Web Tools User's Guide 4-65
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 138
    4 Switch View 4-66 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 139
    Tools, which consist of the following: Port Information View on page 5-1 Note: Switches modifications are correctly applied, ensure that the switch is modified from only one connection at switch name/) Web Tools launches, displaying Fabric View. 3. Click the Switch icon in Fabric View. The Switch
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 140
    5 Port View Figure 5-1 Port Information View The following tabs are available in Port Information View: • PortStats Tab • GBIC Tab • Loop Tab 5-2 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 141
    the sample interval has passed (the default interval is 1 minute). The type of port. • E_Port Switch link port • G_Port Generic port • U_Port Universal port • F_Port Fabric port • FL_Port Fabric loop the selected port. The PortStats tab is shown in Figure 5-2. Web Tools User's Guide 5-3
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 142
    R_RDY has priority over frames to be sent. Time BB_Credit Zero Number of times BB_Credit went to zero. Encd Errs Inside Frames Number of encoding errors inside frames. Frames with CRC Errs Number of frames with CRC errors. Short Frames Number of frames shorter than minimum. Long Frames
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 143
    encoding HP Brocade 2400/2800 and FC 6164 switches or the Small Form Factor Pluggable (SFP) for the FC Entry Switch 8B, FC Switch 8B, and FC 16B installed in the selected port. The information displayed depends on the type of GBIC installed. The GBIC tab is shown in Figure 5-3. Note: In this guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 144
    ID GBIC Short wave serial ID GBIC Short wave serial ID GBIC Indicates the GBIC speed, which can be 100 or 200 MB/sec. 5-6 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 145
    Fibre Channel link, which can be long distance, intermediate distance, or short distance. Encoding Indicates the serial encoding mechanism, which can be 8B10B, 4B5B, NRZ, or Manchester. Baud Rate Nominal longwave only). Current Laser diode drive current in mAmps. Web Tools User's Guide 5-7
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 146
    has successfully initialized. Displays number of times looplet failed to successfully initialize. Displays number of times looplet was not included as part of QuickLoop. 5-8 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 147
    initialized. Displays number of times switch reverted to single switch mode. Displays number of times switch operated in dual switch mode. Displays time of latest QuickLoop initialization. Displays number of switch, port that caused the latest initialization. Web Tools User's Guide 5-9
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 148
    5 Port View 5-10 Web Tools User's Guide
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 149
    8b/10b Encoding An encoding scheme that converts each 8-bit byte into 10 bits. Used to balance ones and zeros in high-speed transports. Address Identifier A 24-bit to interface with a set of services. A shared 100 MBps Fibre Channel transport structured as a loop. Can support up to 126 devices
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 150
    . Connectionless service for control traffic between switches, with notification of delivery or nondelivery of data between the E_Ports. A specified set of delivery characteristics and attributes for frame delivery. Comma A unique pattern (either 1100000 or 0011111) used in 8B/10B encoding to
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 151
    1 and 2 services to manage the exchange of frames across the fabric between source and destination. See also End-to-end Flow Control, BB_Credit. EIA Rack A storage rack that meets the standards set by the Electronics Industry Association. Enabled Zone The currently enabled configuration of zones
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 152
    initialization of Fibre Channel switches in order to create a multi-switch Fibre Channel fabric. Fibre Channel A protocol service that supports communication between Fibre Channel service Transport providers. See also FSP. Fill Word Firmware An IDLE or ARB ordered set that is transmitted during
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 153
    . See also Target. The fabric created by the HP FC 6164, consisting of six Silkworm 2250 switches cabled together and configured to handle traffic as a seamless group. IOD ISL ISL Trunking Isolated E_Port In-order Delivery; a parameter that, when set, guarantees that frames are either delivered in
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 154
    Link Services A AL_PA values in an arbitrated loop. A set of devices connected in a loop to that is based on 1300mm lasers and supports link speeds of 1.0625 Gbps. May configuration and device information. The MIB types provided with HP Brocade switches are described in the MIB Reference Manual
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 155
    an equipment port to the fabric in a loop configuration through an FL_Port. See also N_Port, Nx_Port. A Set A transmission word that uses 8B/10B mapping and begins with the K28.5 character. Ordered sets Self-Test; a series of tests run by a switch after it is turned on. Private NL_Port An NL_Port
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 156
    gateway. See also Distributed Fabrics. Request Rate The rate at which requests arrive at a servicing entity. See also Service Rate. Route Routing As applies to a fabric, the communication path between two switches. May also apply to the specific path taken by an individual frame, from source to
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 157
    ; a switch service that stores the configuration of the switch by F_Ports. • Arbitrated loop - Multiple NL_Ports connected in a loop. A mode in which private devices can communicate with public devices across the fabric. Transmission A 10-bit character encoded according to the rules of the 8B/10B
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 158
    U_Port UDP ULP ULP_TOV Unicast Web Tools Well-known Address Universal Port; a switch port that can operate as a G_Port, A specified set of zones. Enabling a configuration enables all zones in that Configuration configuration. See also Defined Configuration, Enabled Configuration. Zoning A
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 159
    tab, Fabric Watch View 4-8 B beacon, status of 4-4 browser installing 2-2 requirements 2-2 bypass option, AL_PA 4-7 C Capabilities of Web Tools 1-2 Config Settings tab, Zone Administration View 3-21, 3-33, 3-35, 3-40, 3-42 Configure Thresholds tab, Fabric Watch View 4-10, 4-14, 4-15, 4-16
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 160
    M Main View Port Information View 1-5 Switch View 1-4 Main Views 1-3 Fabric View 1-3 Menus 4-20 N Name Server Table View 3-3, 3-8 O Overview 1-1 P Performance Monitor 4-17 Actions menu 4-21 Additional Options 4-37 Basic Monitoring 4-27 Display Canvas Configurations 4-21 Graph Types 4-19 New Features
  • HP StorageWorks 8B | Web Tools User's Guide (Version 3.0) - Page 161
    4-17 Port Information 1-5, 5-1 Switch 1-4, 4-1 Switch Events 4-4 Telnet interface 4-64 Zone Administration 3-10 W Web browser installing 2-2 web browser requirements 2-2 workstation requirements 2-1 Z Zone Administration View 3-10 Config Settings tab 3-21, 3-33, 3-35, 3-40, 3-42 Fabric Assist tab
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
user's guide
version 3.0
web tools
www.hp.com