HP StorageWorks EVA3000 HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele
HP StorageWorks EVA3000 Manual
View all HP StorageWorks EVA3000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks EVA3000 manual content summary:
- HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 1
HP StorageWorks EVA iSCSI Connectivity Option 5.0 release notes Part number: 5697-6714 Eighth edition: August 2007 - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 3
/6x00/8x00 XCS 6.110 • Command View EVA 7.0 Product models • HP StorageWorks EVA iSCSI Connectivity Option (AE324A) • HP StorageWorks EVA iSCSI Upgrade Option (AE325A) • Optional: • Four 4Gb Copper cables (AG311A) • 4Gb SW Single SFP Transceiver (A7446B) Devices supported • Microsoft® Windows® iSCSI - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 4
• EVA3000/5000 (VCS 4.001, 3.028) • HP StorageWorks Command View EVA 5.0, 6.0, 6.02, 7.0 Installation instructions For information about installing these products, see the HP StorageWorks EVA iSCSI connectivity quick start instructions for Windows and the HP StorageWorks EVA iSCSI connectivity user - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 5
to the Solaris server iqn using Command View, the user must remove LUN 0 from the Solaris iqn entry for each iSCSI presented target on the mpx100: 1. Use Telnet to connect to the mpx100 management port, or connect to the mpx100 serial port using the HP-supplied connector. NOTE: The mpx100 management - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 6
Where: iqn.1986-03.com.hp:fcgw.mpx100 The standard iqn name for all mpx100s blg2-lab Symbolic Name 1 iSCSI port number 50001fe150002f70.50001fe150002f7f Presented EVA port For details about modifying the Symbolic Name, see the HP StorageWorks EVA iSCSI connectivity option user guide. 6 - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 7
the ATTO iSCSI initiator is installed. DHCP assigned IP address of mpx100's management port may confuse Command View EVA When an mpx100 management port's IP address is configured using DHCP, Command View EVA initially discovers the mpx100. However, Command View EVA does not rediscover the management - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 8
HP StorageWorks High-Availability Fabric Manager (HAFM) for M-Series Fibre Channel into the target after changing the initiator iqn name The iSCSI name structure is fairly rigid and contains two parts: a type designation followed by a unique name string. The two type designators for iSCSI are: • The - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 9
assignments to the old iqn are still maintained. Workaround Using Command View EVA, unpresent the LUN from the old initiator iqn and then Services\Tcpip\Parameters. Installing the Windows iSCSI initiator from the HP StorageWorks iSCSI Connectivity Option for Enterprise Virtual Array Windows software - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 10
any other FC host, by Command View via the iSCSI host entry under the Command View EVA hosts folder. If an mpx100 is replaced, the iSCSI host entry must contain the WWPNs of the replacement to continue LUN presentation. Workaround Once a new mpx100 has been installed and restored with the full con - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 11
VCS 3.028 to present to an iSCSI initiator, the LUN's preferred path properties must be set to either Path (controller) A or Path (controller) B. When an EVA GL is running VCS 3.028 firmware, the controllers are configured in Active/Passive mode. Because a LUN is not presented out of all - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 12
configurations, a lost connection to the upgraded mpx100 does not disrupt I/O to a commands Ordered delivery of iSCSI commands cannot be guaranteed for applications running on iSCSI initiators that use ordered tagged commands. Workaround HP their capacity to support iSCSI storage. Workaround If - HP StorageWorks EVA3000 | HP StorageWorks EVA iSCSI Connectivity Option 5.0 rele - Page 13
Supersedes history Supersedes mpx100 firmware version 2.0.8.8. Effective date August 2007 EVA iSCSI Connectivity Option 5.0 13
HP StorageWorks
EVA iSCSI Connectivity Option 5.0
release notes
Part number: 5697-6714
Eighth edition: August 2007