HP StorageWorks EVA4000 HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele
HP StorageWorks EVA4000 Manual
 |
View all HP StorageWorks EVA4000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks EVA4000 manual content summary:
- HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 1
HP StorageWorks EVA iSCSI Connectivity Option 5.1 release notes Part number: 5697-7321 Ninth edition: January 2008 - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 3
11 • EVA4x00/6x00/8x00 (XCS 6.1x0, 6.000, 5.100, 5.031) • EVA3000/5000 (VCS 4.001, 3.028) • HP StorageWorks mpx100 firmware 2.0.9.0 • HP StorageWorks mpx Manager (Windows, Linux) • HP StorageWorks Command View EVA 5.0, 6.02, 7.0 • VMware ESX server 3.0.1 with native iSCSI software initiator • VMware - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 4
instructions for Windows and the HP StorageWorks EVA iSCSI connectivity user guide available at nl http://h18006.www1.hp.com/products/storageworks/evaiscsiconnect/index.html Important information The following sections list important notes and workarounds. Sun Solaris server does not support EVA - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 5
connect to the mpx100 management port, or connect to the mpx100 serial port using the HP-supplied connector. NOTE: The mpx100 management port's default IP address is 10.0.0.1/255.0.0.0. list above ('q' to quit): 0 LUN Vendor - --- - 0 HP 1 HP 2 HP 3 HP 4 HP . . . EVA iSCSI Connectivity Option 5.1 5 - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 6
Where: iqn.1986-03.com.hp:fcgw.mpx100 The standard iqn name for all mpx100s blg2-lab Symbolic Name 1 iSCSI port number 50001fe150002f70.50001fe150002f7f Presented EVA port For details about modifying the Symbolic Name, see the HP StorageWorks EVA iSCSI connectivity option user guide. 6 - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 7
not support MAC server Sleep mode. If the Mac goes to sleep because server Sleep mode is enabled, it may lose its iSCSI connections to its EVA LUNs Reduce the I/O workload • Use a smaller application transfer size HP StorageWorks High-Availability Fabric Manager (HAFM) for M-Series Fibre Channel - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 8
Workaround Use an alternative M-Series application to configure zones that include the mpx100 WWPNs. Select one of the following applications: • Prior to HAFM 8, use Embedded Web Server. • For HAFM 8 and later, use HAFM Basic. NOTE: After configuring the zones, you must update HAFM to include these - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 9
iqn are still maintained. Workaround Using Command View EVA, unpresent the LUN from the old initiator iqn Services\Tcpip\Parameters. Installing the Windows iSCSI initiator from the HP StorageWorks Registry Editor incorrectly can cause serious problems that can require reinstallation of the operating - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 10
for the content pane is 60 seconds. iSCSI host entry in Command View EVA 5.0 and 6.0 must be refreshed with new WWPNs after an mpx100 FRU replacement Channel ports are not updated with the new hardware's Fibre Channel port WWN, manually delete the old Fibre Channel port WWN. 4. Use add host to add - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 11
Cross-reference the preferred path EVA controller with the correct EVA target port by comparing the preferred path to the other mpx100 iSCSI ports. Workaround HP recommends that activity on the interfaces be suitability regarding their capacity to support iSCSI storage. Workaround If dedicated switches - HP StorageWorks EVA4000 | HP StorageWorks EVA iSCSI Connectivity Option 5.1 rele - Page 12
checkDuplicateIp: Detected Error MAC address The management port is still enabled, and it is still using its IP address. Workaround To clear the LED, turn the mpx100 beacon light off with either the mpx Manager or the following CLI command: beacon off Supersedes history Supersedes mpx100 firmware
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
 |
 |
HP StorageWorks
EVA iSCSI Connectivity Option 5.1
release notes
Part number: 5697-7321
Ninth edition: January 2008