HP StorageWorks EVA4400 Brocade Fabric OS Documentation Updates - Supporting F
HP StorageWorks EVA4400 Manual
View all HP StorageWorks EVA4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks EVA4400 manual content summary:
- HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 1
53-1002063-09 ® 02 August 2012 Fabric OS Documentation Updates Supporting Fabric OS v6.4.x - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 2
copy of the programming source code, please visit http://www.brocade.com/support/oscd. Brocade Communications Systems, Incorporated Corporate and Latin American Headquarters Brocade Communications Systems, Inc. 130 Holger Way San Jose, CA 95134 Tel: 1-408-333-8000 Fax: 1-408-333-8101 E-mail: info - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 3
-1002063-09 Added updates for the Fabric OS Administrator's Guide, Fabric OS Command Reference, Brocade DCX Backbone Hardware Reference Manual, Brocade DCX-4S Backbone Hardware Reference Manual. September 2011 Added updates for the Fabric OS Command Reference December 2011 Added updates for the - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 4
iv Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 5
Chapter 9, Configuring QoS using the CEE CLI 3 Documentation updates for Fabric OS v6.4.1 4 Chapter 3, Standard CEE Integrations and Configurations. . . . . 4 Chapter 7, Configuring LLDP using the CEE CLI 4 Chapter 9, Configuring QoS using the CEE CLI 5 Chapter 3 CEE Command Reference In this - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 6
47 Documentation updates for Fabric OS v6.4.0 and later 47 Chapter 1, Fabric Watch notification types 47 Chapter 2, Fabric Watch Thresholds 48 Chapter 4, Fabric Watch Activation 48 Fibre Channel over IP Administrator's Guide In this chapter 49 vi Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 7
updates for Fabric OS v6.4.0 and v6.4.1 49 Appendix A, Fibre Channel Fast Write (FCFW 49 In this appendix 49 FC Fast Write (FCFW) concepts 50 Configuring and enabling FCFW 52 Disabling FCFW 53 Disabling FCFW flows without removing FCFW 54 Brocade DCX Backbone Hardware Reference Manual In this - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 8
viii Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 9
Fabric OS Encryption Administrator's Guide (RKM) Fabric OS Encryption Administrator's Guide (TEMS) Fabric OS Encryption Administrator's Guide (SKM) Fabric OS Encryption Administrator's Guide (TKLM) Fibre Channel over IP Administrator's Guide Fabric OS Message Reference Fabric OS Troubleshooting and - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 10
TABLE 1 Documentation Supporting Fabric OS 6.4.x Publication Title Fabric OS Release Page Number Web Tools Administrator's Guide DCX Backbone Hardware Reference Manual DCX-4S Backbone Hardware Reference Manual v6.4.0 and later v6.4.0 and later v6.4.0 and later No updates Updates on page 55 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 11
Document feedback Quality is our first concern at Brocade and we have made every effort to ensure topic needs further development, we want to hear from you. Forward your feedback to: [email protected] Provide the title and version number of the document and as much detail as possible about - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 12
xii Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 13
page 48, add the following note at the bottom of the page. NOTE N_Port Trunking is not supported for HBAs connected to switches running in Access Gateway mode. This feature is only be supported for HBAs connected to switches running in Native mode. Fabric OS Documentation Updates 1 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 14
1 Documentation updates for Fabric OS v6.4.1 and later 2 Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 15
, and underscore characters. Spaces are prohibited. Special characters are not supported, and cause the name to truncate. Chapter 9, Configuring QoS using the CEE CLI Under the heading of "Creating a CEE map" on page 107, add the following note: NOTE The name used in the cee-map command must begin - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 16
underscore characters. Spaces are prohibited. Special characters are not supported, and cause the name to truncate. Chapter 7, Configuring LLDP using the CEE CLI Under the heading of "Configuring the iSCSI profile" on page 83, add the following note: NOTE The name used in the cee-map command must - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 17
Documentation updates for Fabric OS v6.4.1 2 Chapter 9, Configuring QoS using the CEE CLI Under the heading of "Creating a CEE map" on page 109, add the following note: NOTE The name used in the cee-map command must begin with a letter, and can consist of letters, digits, hyphens, and underscore - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 18
2 Documentation updates for Fabric OS v6.4.1 6 Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 19
chapter are for the CEE Command Reference, published March 2010 and October 2010. • Documentation updates for Fabric OS v6.4.0 7 • Documentation updates for Fabric OS v6.4.1 7 Documentation updates for Fabric OS v6.4.0 USAGE GUIDELINES Revised commands in Fabric OS v6.4.0 Under the command cee - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 20
3 Documentation updates for Fabric OS v6.4.1 8 Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 21
the Fabric OS Administrator's Guide, published September 2010. •Documentation updates for Fabric OS v6.4.0 and later 9 •Documentation Updates for Fabric OS v6.4.1 and later 12 Documentation updates for Fabric OS v6.4.0 and later Chapter 6, Configuring Protocols In the section "Installing a switch - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 22
if there is a zone mismatch. When hardware-enforced zoning is active, the Fabric OS switch monitors the communications and blocks any frames that do not comply with the effective zone configuration. The switch performs this blocking at the transmit side of the port on which the destination device is - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 23
high-bandwidth links between to Brocade DCX chassis, without consuming valuable front-end 8 Gbps ports. Each chassis must have the ICL license installed in order to enable the full 16-link ICL connections (Available on the DCX only). NOTE: It is possible to upgrade an ICL 8-link License on a DCX to - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 24
FC switch as well as on the Brocade HBAs. This section describes the configuration steps you do on the switch. See the Brocade Adapters Administrator's Guide for a detailed description and requirements of N_Port trunking. 1. On the switch side, perform the following steps: a. Configure both ports - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 25
296 enabled for ports 3/40 and 3/41. 2. On the host side, enable trunking as described in the Brocade Adapters Administrator's Guide. 3. On the switch side, enable the ports using the portEnable command. switch:admin> portenable 3/40 switch:admin> portenable 3/41 Fabric OS Documentation Updates 13 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 26
4 Documentation Updates for Fabric OS v6.4.1 and later 14 Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 27
OS v6.4.0 NOTE The updates in this section are for the Fabric OS Command Reference, publication number 53-1001764-01, published March 2010 and supporting Fabric OS v6.4.0. Updates refer to the help pages for the commands indicated and the associated man pages on the switch. ceePortLoopbackTest - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 28
on a port: switch:admin> perfaddusermonitor 1/4 "0, 0xff, 6" User monitor #1 added switchName A switch name can include up to 30 characters on all platforms running Fabric OS v.6.2.0 or later. On the Brocade 300, 5100, 5300, and 5410 platforms running earlier firmware versions, the switch name can - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 29
MONITORING The following command help pages were accidental deleted from the code and in the v6.4.0 Command reference. These commands are still valid in all v6.x firmware versions. However, the recommendation is to use the more recent commands, perfMonitorShow and perfMonitorClear. Fabric - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 30
with a specific monitorId Issuing portStatsClear on a port also results in all end-to-end monitors clearing. Notes This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 31
a specific monitorId. Issuing portStatsClear on a port also results in all filter-based monitors clearing. Notes This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 32
Note The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to chapter 1, "Using Fabric OS Performance configuration from FLASH Save Performance configuration to FLASH Clears the CRC error count associated with a port Clears statistics - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 33
the EE monitor configured on the switch port 0 using an application that passes an IPV6 address: switch:admin> perfshoweemonitor 0 There is 1 end-to-end monitor(s) defined on port 0. switch:admin> perfshoweemonitor 0 KEY SID DID OWNER_APP TX_COUNT 18 Fabric OS Documentation Updates 53-1002063 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 34
display cumulative information from EE monitors on a port: switch:admin> perfshoweemonitor 4/5 There are 7 end-to-end monitor(s) defined on port 53. KEY SID DID OWNER_APP TX_COUNT RX_COUNT 0x0000000000000000 192.168.169.40 perfAddEEMonitor, perfHelp 22 Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 35
. Notes This command requires a Brocade Advanced Performance Monitoring license. This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE ports. The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 36
filter monitor information on a port: switch:admin> perfshowfiltermonitor 2/52 There are 7 filter-based monitors defined on port 21. KEY ALIAS OWNER_APP .169.40 6 SCSI_WR WEB_TOOLS 0x000000000000033a 192.168.169.40 perfMonitorShow, perfHelp 24 Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 37
's Guide. In Access Gateway mode, only the following class thresholds are supported. F/FL Port (Copper) class threshold is supported only on Embedded platforms. TABLE 1 Access Gateway mode classes Class Environmental SFP Port Fabric F/FL_Port (Optical) F/FL_Port (Copper) Resource Notes This - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 38
3 : Power Supply 4 : return to previous page Select an area => : (1..4) [4] 2 Name Label Last value envFan001 Env Fan 1 2576 RPM envFan002 Env Fan 2 2518 RPM envFan003 Env Fan 3 2481 RPM switch:user> fwshow 1 : Show class thresholds 2 : Detail threshold information 3 : Show port - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 39
port persistence time: switch:admin> fwshow --port --persistence FW: current port persistence time = 18s To display ports that have all thresholds disabled: switch:user> fwShow --disable --port Port Threshold Status 1 disabled fwClassInit, fwConfigReload, fwConfigure, fwSet Fabric OS - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 40
distance configuration is detected. NOTES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. For details on command availability, refer to the Fabric OS Command Reference, Appendix A. This command is only supported only on the Brocade FC8 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 41
supported when the slot is online switch:admin> slotpoweroff 11 switch:admin> slotpoweroff 12 switch:admin> bufopmode --set 12 Buffer optimized mode is turned on for slot 11 switch:admin> bufopmode --reset 12 Buffer optimized mode is turned off for slot 12 switch:admin> slotpoweron 11 switch:admin - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 42
across switch reboots or power cycle. Use the portCfgShow command to display user-configured fault delay settings. NOTES OPERANDS EXAMPLES The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in place. Refer to Chapter 1, "Using Fabric OS Commands - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 43
Limit Credit Recovery ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON ON Fport Buffers Port Auto Disable Fault Delay 0001 0000 0000 0000 (output truncated) portCfgShow Command RBAC permissions and AD types Refer to Table 2 for the RBAC and Admin Domain availability of new Fabric OS v6 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 44
can wait after it is received on the ingress port and before it is delivered to the egress port. If the frame waits in the egress buffer for more than the configured hold time, the switch drops the frame, replenishes sender's credit, and increments the counters sts_tx_timeout and er_c3_timeout on - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 45
switch: Switch:admin> configure Not all options will be available on an enabled switch. To disable the switch, use the "switchDisable" command. Configure... Fabric parameters (yes, y, no, n): [no] yes Configure edge hold time (yes, y, no, n): [no] yes Edge hold time: (100..500) [220] System services - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 46
on the RASlog messages, refer to the Fabric OS Message Reference. Add the following text to the Notes section: The credit recovery commands are supported only on backend ports of Condor, Condor 2, and Condor 3-based blades in the Brocade DCX, DCX-4S, DCX 8510-8, and DCX 8510-4 chassis. 34 Fabric - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 47
with LrOnThresh To disable backend port credit recovery and to display the configuration: switch:admin> bottleneckmon --cfgcredittools \ -intport -recover off switch:admin> bottleneckmon --showcredittools Internal port credit recovery is Disabled Fabric OS Documentation Updates 35 53-1002063 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 48
Credit recovery enhancements: The credit recovery configuration command has been enhanced to support on-demand checking of certain types of backend ports for credit loss. 1. Support 1. The default value is 0.8. This parameter is valid only for congestion alerts. 36 Fabric OS Documentation Updates - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 49
the equivalent fraction between 0 and 1. The default value is 0.1. This parameter is valid only for switch-wide configuration: switch:admin> bottleneckmon --config -alert 5 To change the bottleneck detection configuration on port 5 to disable alerts; overrides switch-wide configuration: switch:admin - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 50
the blade is faulted (RAS Cx-1018). Note that regardless of whether the link reset occurs on the port blade or on the core blade, the port blade is always faulted. If you suspect complete credit loss on a particular virtual channel (VC) on a particular backend port, use the -check option to examine - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 51
recovery examples To examine a backend port for credit loss: switch:admin> bottleneckmon --cfgcredittools \ -intport -check 10/4,30 Started Credit loss Detection on slot 10 port 4 VC 30. Please wait.... Detected credit loss. Link Reset performed. Fabric OS Documentation Updates 39 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 52
for a short period of time (24-48 hours) to see if this resolves the problem. Then disable the function to reduce the risk of resetting register values unnecessarily if single occurrence errors are encountered. If the errors persist contact your service provider. --autoset --autodisable --autoreset - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 53
tuning optimization on all backend ports and reset all tuning values to their default values: switch:admin> serdestunemode --autoreset AutoTune Resetting Default Tuning On Next Poll switch:admin> serdestunemode --show Autotunemode is in reset state Fabric OS Documentation Updates 41 53-1002063 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 54
5 serDesTuneMode 42 Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 55
44 •Chapter 57, KAC System Messages 45 Documentation updates for Fabric OS v6.4.0 and later The updates in this chapter are for the Fabric OS Message Reference Supporting Fabric OS v6.4.0 (53-1001767-01), originally published in March 2010. NOTE The updates are arranged by the chapter names as they - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 56
reset or replaced: fault1:, fault2: thresh2:0x. Probable Cause Indicates above normal errors observed in hardware that may or may not impact data traffic. Recommended Whenever this error is observed persistently, power cycle the faulted blade. If the problem - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 57
EA DRAFT: BROCADE CONFIDENTIAL Chapter 57, KAC System Messages 6 Chapter 57, KAC System Messages Include the following message in the failed. Actual Key: . Error code=, string=. Fabric OS Documentation Updates 45 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 58
6 KAC-1014 EA DRAFT: BROCADE CONFIDENTIAL Probable Cause Indicates that primary or backup key vault. Recommended Change the switch key vault settings and/or ensure that the configured key vault is operational. Action Severity ERROR KAC- ERROR 46 Fabric OS Documentation Updates 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 59
to the following sections in the Fabric OS MIB Reference Guide, part number: 53-1001768-01: • "Understanding SNMP basics" • "Loading Brocade MIBs" • Table 14: SW-MIB Traps SNMP trap counters The following SNMP information will be added in the next release of Fabric Watch: • When a counter is in - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 60
low threshold • Below low threshold NOTE The above low threshold action applies only to the portThConfig command. It does not apply to the thConfig and sysMonitor commands. In-between buffer values The below high threshold is the term used to configure "in between" buffer values, as shown below. In - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 61
(FCFW) In this appendix •FC Fast Write (FCFW) concepts 50 •Configuring and enabling FCFW 52 •Disabling FCFW 53 •Disabling FCFW flows without removing FCFW 54 NOTE Fibre Channel Fast Write is currently only supported by the 7500 switch and FR4-18i blade. Fabric OS Documentation Updates 49 53 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 62
-FC Routing Service (FRS) rather than FCIP . FIGURE 1 Typical network topology for FCFW Platforms and OS requirements for FCFW Fabric OS supports FCFW between two Brocade 7500 routers or two FR4-18i blades connected by a Fibre Channel network. FCFW is a new feature beginning with Fabric OS release - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 63
I/Os (both support FCFW. An FCFW-specific zone configuration is used to filter FCFW flows. Hardware considerations for FCFW FCFW is implemented in a hardware configuration consisting of two Brocade 7500 switches or two Brocade 48000 or DCX directors with FR4-18i blades connected by Fibre Channel - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 64
for Fabric OS v6.4.0 and v6.4.1 • FC ports on both the 7500 switch and the FR4-18i blade are organized into two groups. Ports 0-7 form one group, and ports 8-15 form the other. A maximum of four ports in each group may be configured as FCFW. • The maximum bandwidth available for FCFW is 4 Gbps per - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 65
the portcfg fastwrite command. portcfg fastwrite --disable 3. Enable a non-FCFW zoning configuration to remove and replace the fcacc zone that includes the WWNs of the devices that were plugged into the ports you disabled in step 1. Fabric OS Documentation Updates 53 53-1002063-09 - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 66
host without removing FCFW on the port. 1. Verify you are using Fabric OS version 6.2.0f or a later version using the firmwareshow command. 2. Disable the port on which you want to disable FCFW, using the portdisable command. 3. Enable a non-FCFW zoning configuration to remove and replace the fcacc - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 67
the Brocade DCX Backbone Hardware Reference Manual, publication manual). 1. Open a Telnet session to the chassis and log in to the active CP as admin. The default password is "password". 2. Verify that you are logged into the active CP. Run the haShow command to determine the active CP. Fabric OS - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 68
bezel and faulted WWN card. ATTENTION Follow ESD precautions (see "ESD Precautions" in your chassis manual). 1. Open a Telnet session to the chassis and log in to the active CP as admin. The default password is "password". 2. Verify that you are logged into the active CP. Run the haShow command to - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 69
the Brocade DCX-4S Backbone Hardware Reference Manual, publication manual). 1. Open a Telnet session to the chassis and log in to the active CP as admin. The default password is "password". 2. Verify that you are logged into the active CP. Run the haShow command to determine the active CP. Fabric OS - HP StorageWorks EVA4400 | Brocade Fabric OS Documentation Updates - Supporting F - Page 70
bezel and faulted WWN card. ATTENTION Follow ESD precautions (see "ESD Precautions" in your chassis manual). 1. Open a Telnet session to the chassis and log in to the active CP as admin. The default password is "password". 2. Verify that you are logged into the active CP. Run the haShow command to
53-1002063-09
02 August 2012
®
Fabric OS
Documentation Updates
Supporting Fabric OS v6.4.x