HP StorageWorks MSA1000 HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo
HP StorageWorks MSA1000 Manual
View all HP StorageWorks MSA1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks MSA1000 manual content summary:
- HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 1
Network Management Protocol First Edition (November 2004) Part Number: A7450-96008 This guide describes the support for Simple Network Management Protocol (SNMP) used with the HP StorageWorks 2/8q Fibre Channel (FC) Switch. This guide describes how to use SNMP to manage and monitor the switch. - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP warranty. HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference Guide First - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 3
HP installation and configuration assistance 20 HP technical support 20 HP storage web site 21 HP authorized reseller 21 1 SNMP Overview 23 SNMP interface objectives 24 Manager and Agent 25 Traps 26 Management Information Base 26 User (1.3.6.1.2.1.1.6 38 HP StorageWorks 2/8q Fibre - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 4
47 ipReasmReqds (1.3.6.1.2.1.4.14 47 ipReasmOKs (1.3.6.1.2.1.4.15 48 ipReasmFails (1.3.6.1.2.1.4.16 48 ipFragOKs (1.3.6.1.2.1.4.17 48 ipFragFails (1.3.6.1.2.1.4.18 48 ipFragCreates (1.3.6.1.2.1.4.19 48 2 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 5
(1.3.6.1.2.1.5.17 57 icmpOutParmProbs (1.3.6.1.2.1.5.18 58 icmpOutSrcQuenchs (1.3.6.1.2.1.5.19 58 icmpOutRedirects (1.3.6.1.2.1.5.20 58 icmpOutEchos (1.3.6.1.2.1.5.21 58 icmpOutEchoReps (1.3.6.1.2.1.5.22 58 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 6
(1.3.6.1.2.1.8.5.1.6 67 egpNeighOutErrs (1.3.6.1.2.1.8.5.1.7 67 egpNeighInErrMsgs (1.3.6.1.2.1.8.5.1.8 68 egpNeighOutErrMsgs (1.3.6.1.2.1.8.5.1.9 68 egpNeighStateUps (1.3.6.1.2.1.8.5.1.10 68 4 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 7
(1.3.6.1.3.94.1.4 80 connUnitTableChangeTime (1.3.6.1.3.94.1.5 81 Connectivity table 82 connUnitId (1.3.6.1.3.94.1.6.1.1 82 connUnitGlobalId (1.3.6.1.3.94.1.6.1.2 82 connUnitType (1.3.6.1.3.94.1.6.1.3 82 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 8
94.1.10.1.3 97 connUnitPortFCClassCap (1.3.6.1.3.94.1.10.1.4 98 connUnitPortFCClassOp (1.3.6.1.3.94.1.10.1.5 98 connUnitPortState (1.3.6.1.3.94.1.10.1.5 99 connUnitPortStatus (1.3.6.1.3.94.1.10.1.7 99 6 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 9
connUnitZoneName (1.3.6.1.3.94.1.13.1.5 115 connUnitZoneCapabilities (1.3.6.1.3.94.1.13.1.6 115 connUnitZoneEnforcementState (1.3.6.1.3.94.1.13.1.7 115 connUnitZoneAttributeBlock (1.3.6.1.3.94.1.13.1.8 115 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 10
connUnitPortStatCountRxOfflineSequences (1.3.6.1.3.94.4.5.1.36 127 connUnitPortStatCountTxOfflineSequences (1.3.6.1.3.94.4.5.1.37 127 connUnitPortStatCountNumberOfflineSequences (1.3.6.1.3.94.4.5.1.38 127 8 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 11
(1.3.6.1.3.94.2.2 138 trapRegIpAddress (1.3.6.1.3.94.2.3.1.1 139 trapRegPort (1.3.6.1.3.94.2.3.1.2 139 trapRegFilter (1.3.6.1.3.94.2.3.1.3 139 trapRegRowState (1.3.6.1.3.94.2.3.1.4 139 Related traps 141 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 12
75.1.1.2 147 fcFeModuleCapacity (1.3.6.1.2.1.75.1.1.3 147 Module table 148 fcFeModuleDescr (1.3.6.1.2.1.75.1.1.4.1.2 148 (1.3.6.1.2.1.75.1.2.3.1.2 156 fcFxPortNxPortBbCredit (1.3.6.1.2.1.75.1.2.3.1.3 156 10 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 13
(1.3.6.1.2.1.75.1.4.3.1.2 166 fcFxPortC3InOctets (1.3.6.1.2.1.75.1.4.3.1.3 166 fcFxPortC3OutOctets (1.3.6.1.2.1.75.1.4.3.1.4 166 fcFxPortC3Discards (1.3.6.1.2.1.75.1.4.3.1.5 167 Capability group 168 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 14
(1.3.6.1.2.1.75.1.5.1.1.13 170 6 MIB Objects 171 MIB definitions 172 fcQxPortPhysAdminStatus (1.3.6.1.4.1.1663.1.3.10.1.1.3 172 fcQxPortPhysOperStatus (1.3.6.1.4.1.1663.1.3.10.1.1.4 173 Index 175 12 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 15
About This Guide This guide describes thAe sbupopourttfothr SiismpGle uNeitdweork Management Protocol (SNMP) used with HP StorageWorks 2/8q objectives, managers and agents, traps, Management Information Bases (MIB), and User Datagram Protocol. ■ Chapter 2-Describes how to configure the switch using - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 16
MSA1000 SAN Kit and 2/8q FC Switch documents are on the MSA1000 Small Business SAN documentation CD: ■ HP StorageWorks Modular Smart Array 1000 Small Business SAN Kit Installation Instructions (also printed) ■ HP StorageWorks 2/8q Fibre Channel Switch Management User Guide ■ HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 17
font Blue underlined sans serif font text (http://www.hp.com) Element Cross User input, commands, code, file and directory names, and system responses (output and messages) Command-line and code variables Web site addresses Text symbols The following symbols may be found in the text of this guide - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 18
guide pertains. They have the following meanings: Any enclosed surface or area of the equipment marked with these symbols indicates the presence of electrical shock hazards. Enclosed area contains no operator serviceable for manually handling material. 16 HP StorageWorks 2/8q Fibre - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 19
site at http://www.hp.com/hps/storage/ns_implementation.html. Depending on your needs, different levels of assistance are available. For example, the HP Installation and Startup for HP StorageWorks Disk Arrays Service Package includes: ■ Physical installation of the MSA. ■ Virtual disk design and - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 20
About this Guide HP storage web site The HP web site has the latest information on this product, as well as the latest drivers. Access storage at: http://www.hp.com/country/us/eng/prodserv/storage.html. From this web site, select the appropriate product or solution. HP authorized reseller For the - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 21
. This SNMP Reference Guide describes how to use SNMP to manage and monitor the switch. Specifically, this guide describes the SNMP agent Information Base, page 22 ■ User Datagram Protocol, page 23 ■ Numbering system conventions, page 23 HP StorageWorks 2/8q Fibre Channel Switch Simple Network - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 22
Fabric Element Management Information Bases (FE-MIB) (rfc2837) and Fibre Alliance Management Information Bases (FA-MIB) draft. ■ Support of version 1 and 2 traps. ■ The SNMP agent supports SNMPv1and SNMPv2c. 20 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 23
agent does not have direct access to the internal database of the switch. Workstation with SNMP Manager Ethernet connection Switch with Agent and common user interface API Figure 1: SNMP interface architecture HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 24
Information (SMI) given in Request For Comment (RFC) 1155. The latest Internet MIB is given in RFC 1213, and is sometimes called MIB-II. 22 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 25
Datagram Protocol The 2/8q FC Switch supports the following User Datagram Protocol (UDP) settings: ■ Agents "listen" on UDP port 161. ■ for numbering systems in this guide are as follows: ■ Decimal = 101 ■ Hexadecimal = 0x101 ■ Binary = 101b HP StorageWorks 2/8q Fibre Channel Switch Simple - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 26
SNMP Overview 24 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 27
the 2/8q FC Switch to support SNMP. The following topics are covered: ■ System specifications and requirements, page 26 ■ Configuring a switch using the Command Line Interface, page 27 ■ Configuring a switch using Switch Manager, page 29 HP StorageWorks 2/8q Fibre Channel Switch Simple Network - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 28
Monitor and control the switch. - Read, write, and receive trap information, if supported. ■ Ports on the switch reserved for SNMP: - Port 161 is not configurable, and is used for the standard SNMP commands. - Port 162 is configurable and is the default port used for traps. 26 HP StorageWorks 2/8q - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 29
Configuration section in the corresponding HP StorageWorks 2/8q Fibre Channel Switch Management User Guide. To configure a switch using the command line interface, do the following. Press the Enter key to accept the default value for each parameter. HP StorageWorks 2/8q Fibre Channel Switch Simple - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 30
) [public ] AuthFailureTrap(True / False) [False ] ProxyEnabled (True / False) [True ] Do you want to save and activate this snmp setup? (y/n) [n] y SNMP setup saved and activated. 28 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 31
2/8q FC Switch using Switch Manager, use the Switch Properties and Network Properties windows. For specific information, refer to the corresponding HP StorageWorks 2/8q Fibre Channel Switch Management User Guide. HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 32
Configuring a Switch 30 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference Guide - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 33
41 ■ ICMP group, page 51 ■ TCP group, page 56 ■ UDP group, page 60 ■ EGP group, page 62 ■ Transmission group, page 66 ■ SNMP group, page 67 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 34
-2 3 } ip OBJECT IDENTIFIER ::= { mib-2 4 } icmp OBJECT IDENTIFIER ::= { mib-2 5 } tcp OBJECT IDENTIFIER ::= { mib-2 6 } udp OBJECT IDENTIFIER ::= { mib-2 7 } snmp OBJECT IDENTIFIER ::= { mib-2 11 } 32 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 35
software. It is mandatory that this only contain printable American Standard Code for Information Interchange (ASCII) characters. ■ Syntax DisplayString-(SIZE (0..255)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Default is HP StorageWorks ■ Return value-HP StorageWorks 2/8q FC Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 36
■ Return value-The default is . The ■ Return value-The default is HP StorageWorks 2/8q FC Switch. services would have a value of 72 (2^(4-1) + 2^(7-1)). ■ Syntax-INTEGER (0..127) ■ Access-Read-only ■ Status-Mandatory ■ Return value-The default is 2. 34 HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 37
Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory ■ Return value-The default is 2. Interfaces table The Interfaces table contains information on the entity's interfaces ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 38
■ Return value-Writes not supported ifOperStatus (1.3.6.1.2.1.2.2.1.8) The current operational state of the interface. The testing(3) state indicates that no operational packets can be passed. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory 36 HP StorageWorks 2/8q Fibre Channel Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 39
(1.3.6.1.2.1.2.2.1.14) The number of inbound packets that contained errors, preventing them from being deliverable to a higher-layer protocol. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 40
■ Status-Mandatory ifOutErrors (1.3.6.1.2.1.2.2.1.20) The number of outbound packets that could not be transmitted because of errors. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory 38 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 41
implementation of ASN.1 (Abstract Syntax Notation) and BER must be able to generate and recognize this value. ■ Syntax-OBJECT IDENTIFIER ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 42
-Read-write ■ Status-Deprecated atNetAddress (1.3.6.1.2.1.3.1.1.3) The NetworkAddress corresponding to the media-dependent `physical' address. ■ Syntax-NetworkAddress ■ Access-Read-write ■ Status-Deprecated 40 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 43
Status-Mandatory ■ Return value-Returns forwarding (1); Writes not supported. ipDefaultTTL (1.3.6.1.2.1.4.2) The default value inserted into the Time-To-Live field of the ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 44
ipInDiscards (1.3.6.1.2.1.4.8) The number of input IP datagrams for which no problems were encountered to prevent their continued processing, but which were user protocols including Internet Control Message Protocol (ICMP). ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory 42 HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 45
IP datagrams that local IP user protocols (including ICMP) supplied output IP datagrams for which no problem was encountered to prevent their transmission cannot route because all of its default gateways are down. ■ Syntax-Counter Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 46
) The number of IP datagram fragments that have been generated as a result of fragmentation at this entity. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory 44 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 47
largest IP datagram which this entity can reassemble from incoming IP fragmented datagrams received on this interface. ■ Syntax-INTEGER (0..65535) ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 48
0.0.0.0 is considered a default route. Multiple routes to Writes not supported ipRouteIfIndex value-Writes not supported ipRouteMetric1 (1.3.6.1.2.1.4.21 value-Writes not supported ipRouteMetric2 (1.3.6.1.2.1.4.21.1.4) supported 46 HP StorageWorks 2/8q Fibre Channel Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 49
value-Writes not supported ipRouteMetric4 (1.3.6.1.2.1.4.21.1.6) An Status-Mandatory ■ Return value-Writes not supported ipRouteNextHop (1.3.6.1.2.1.4.21.1.7) The IP address of Return value-Writes not supported ipRouteType (1.3.6.1.2.1.4.21.1.8) The type supported HP StorageWorks 2/8q - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 50
that hosts should support those protocols. value-Writes not supported ipRouteMask (1.3.6.1.2.1.4.21.1.11 value-Writes not supported ipRouteMetric5 (1.3.6.1.2.1.4.21 Return value-Writes not supported ipRouteInfo (1.3.6.1.2.1.4.21.1.13) HP StorageWorks 2/8q Fibre Channel Switch Simple - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 51
■ Return value-Writes not supported ipNetToMediaPhysAddress (1.3.6.1.2.1.4.22.1.2) The media value-Writes not supported ipNetToMediaNetAddress (1.3.6.1.2.1.4.22.1.3) Return value-Writes not supported ipNetToMediaType (1.3.6.1.2.1.4.22.1.4) The Writes not supported HP StorageWorks 2/8q Fibre - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 52
possible reason for discarding such an entry is to free-up buffer space for other routing entries. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory 50 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 53
received. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory icmpInParmProbs (1.3.6.1.2.1.5.5) The number of ICMP Parameter Problem messages received. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 54
. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory icmpInTimestampReps (1.3.6.1.2.1.5.11) The number of ICMP Timestamp Reply messages received. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory 52 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 55
15) The number of ICMP messages this entity did not send due to problems discovered within ICMP, such as a lack of buffers. This value must not ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 56
MIB-II Objects icmpOutParmProbs (1.3.6.1.2.1.5.18) The number of ICMP Parameter Problem messages sent. ■ Syntax-Counter ■ Access-Read-only ■ Status sent. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory 54 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 57
-Read-only ■ Status-Mandatory icmpOutAddrMaskReps (1.3.6.1.2.1.5.26) The number of ICMP Address Mask Reply messages sent. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory MIB-II Objects HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 58
maximum number of TCP connections the entity can support. In entities where the maximum number of connections is dynamic, this object must contain the value -1. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory 56 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 59
-Mandatory tcpCurrEstab (1.3.6.1.2.1.6.9) The number of TCP connections for which the current state is either ESTABLISHED or CLOSE-WAIT. ■ Syntax-Guage ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 60
connection on the managed node. The result is an immediate termination of the connection. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory ■ Return value-Writes not supported 58 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 61
-Counter ■ Access-Read-only ■ Status-Mandatory tcpOutRsts (1.3.6.1.2.1.6.15) The number of TCP segments sent containing the RST flag. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 62
. udpInDatagrams (1.3.6.1.2.1.7.1) The total number of UDP datagrams delivered to UDP users. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory udpNoPorts IpAddress ■ Access-Read-only ■ Status-Mandatory 60 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 63
udpLocalPort (1.3.6.1.2.1.7.5.1.2) The local port number for this UDP listener. ■ Syntax-INTEGER (0..65535) ■ Access-Read-only ■ Status-Mandatory MIB-II Objects HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference Guide 61 - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 64
by a value that is one greater than the numerical value associated with the state in RFC 904. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory 62 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 65
locally generated EGP messages not sent to this EGP peer due to resource limitations within an EGP entity. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 66
poll command retransmissions, in hundredths of a second. This represents the t3 timer as defined in RFC 904. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory 64 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 67
Access-Read-only ■ Status-Mandatory egpNeighEventTrigger (1.3.6.1.2.1.8.5.1.15) A control variable used to trigger operator-initiated Start and Stop events. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 68
value used for the media in the ifType column of the ifTable object, and "number" is the actual integer value corresponding to the symbol. 66 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 69
those SNMP implementations that are optimized to support only those functions specific to either a the SNMP entity from the transport service. ■ Syntax-Counter ■ Access protocol entity to the transport service. ■ Syntax-Counter ■ HP StorageWorks 2/8q Fibre Channel Switch Simple - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 70
delivered to the SNMP protocol entity for which the value of the error-status field is "badValue". ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory 68 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 71
(1.3.6.1.2.1.11.15) The total number of SNMP Get-Request PDUs accepted and processed by the SNMP protocol entity. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 72
generated by the SNMP protocol entity for which the value of the error-status field is "tooBig"' ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory 70 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 73
-Mandatory snmpOutSetRequests (1.3.6.1.2.1.11.27) The total number of SNMP Set-Request PDUs generated by the SNMP protocol entity. ■ Syntax-Counter ■ Access-Read-only ■ Status-Mandatory HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 74
information; as such, it disables all authentication-failure traps. HP recommends that this object be stored in non-volatile memory so if AuthFailureTrap = True; otherwise disabled (2). Writes not supported. 72 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 75
113 ■ Port statistics table, page 115 ■ Simple Name Server (SNS) table, page 127 ■ Platform table, page 131 ■ Trap table, page 134 ■ Related traps, page 137 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 76
, etc. module(12) - subcomponent of a system swdriver(13) - software driver storage-access-device(14) - Provides storage management and access for heterogeneous hosts and heterogeneous devices wdm(15) - waveform division multiplexer ups(16) - uninterruptable power supply } 74 HP StorageWorks 2/8q - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 77
this object. ■ (0) = '0' ■ (1) = '4' ■ (2) = '0' ■ (3) = '0' - Syntax-DisplayString (SIZE (4)) - Access-Read-only - Status-Mandatory - Return value-Four-digit ASCII value (for example, 0400 for MIB revision 4.0) HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 78
are preceded by a percent sign (for example, %USER). ■ Syntax-DisplayString ■ Access-Read-write ■ Status- (for example, http://10.0.0.1.). Writes not supported, returns 'NoSuchName". statusChangeTime (1.3.6.1.3.94.1.3) The error status "NoSuchName" 76 HP StorageWorks 2/8q Fibre Channel Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 79
entry was either added or deleted), in centiseconds. ■ Syntax-TimeTicks ■ Access-Read-only ■ Status-Obsolete ■ Return value-Object is obsolete; always returns error status "NoSuchName" HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 80
physical ports in the connectivity unit (internal/embedded, external). ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory ■ Return value-Number of ports on the switch 78 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 81
is reporting Bad and/or warning (4) not installed If both power supplies are reporting Bad and/or not installed failed (5) If one or more cooling fan Offline or in Diagnostics mode warning (4) Return value HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 82
value-Returns the switch product type HP StorageWorks 2/8q FC Switch connUnitSn (1.3.6.1.3.94.1.6.1.8) definition as systemURL for keywords. If write is not supported, the return value is invalid. This value is retained Writes not supported, returns 'NoSuchName". 80 HP StorageWorks 2/8q Fibre - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 83
is a switch, it must be set to the Domain Controller address. If this value is not applicable, return all bits Read-only ■ Status-Mandatory ■ Return value-Domain controller address (for example, FF FC 65) connUnitProxyMaster 6. HP StorageWorks 2/8q FC Switch = 5. HP StorageWorks 2/8q Fibre - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 84
Return value-Number of entries in the revision table (for example, HP StorageWorks 2/8q FC Switch= 4). The revision table contains the revision numbers is obsolete; always returns error status "NoSuchName" 82 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 85
module. Use it to create a connUnit with a connUnitType of "module of a module. ■ default is HP StorageWorks default is HP StorageWorks 2/8q FC Switch. connUnitControl (1.3.6.1.3.94.1.6.1.22) This object is used to control HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 86
connUnitContol write control values Control value Cold Reset (3) Offline (5) Online (6) Other Reset Offline Online Not supported Result Status-Mandatory ■ Return value-Default is . The string size is limited to a maximum of 64. 84 HP StorageWorks 2/8q Fibre Channel Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 87
Critical (4) Warning (6) Info (8) Unknown (1) Table 10: connUnitEventFilter control write values Control value Emergency (2) Alert (3) Critical (4) Error (5) Warning (6) the number of events in the event table HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 88
link table entries for each switch connUnitVendorId (1.3.6.1.3.94.1.6.1.31) The connectivity unit vendor's name. ■ Syntax-DisplayString (SIZE (0..79)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-HP 86 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 89
and Index. The Table of revisions for hardware and software elements. There are four revision items in each switch. installed. SNMP first reports the firmware revision and flasher shell version. It iterates through each of the installed return values. HP StorageWorks 2/8q Fibre Channel Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 90
return values Table index 1 2 3 4 Return value Active Firmware Image Flasher Shell Version Hardware PCB Version Hardware ASIC Version 4 Return value Active Firmware Version Flasher Shell Version Hardware PCB Version Hardware ASIC Version 88 HP StorageWorks 2/8q Fibre Channel Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 91
return values. Table 13: ConnUnitSensorName return values Table index 1 2 3 4 5 Return value Power Supply 1 Status Fan 1 Status Temperature Status Temperature Sensor 1 Value Temperature Sensor 2 Value HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 92
static information about the sensor, such as its serial number. ■ Syntax-DisplayString ■ Access-Read-only ■ Status-Mandatory ■ Return value-Always returns an empty string 90 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 93
. Table 17: ConnUnitSensorMessage values Sensor Power Supply Fan Temperature Status Temperature Value Value Good/Bad/NotInstalled Good/Bad/NotInstalled Normal/Warm/Overheating/NotInstalled Degrees in C HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 94
connUnitSensorCharacterisitic values. Table 19: ConnUnitSensorCharacteristic values Sensor Temperature Value Temperature Status Fan Power Supply Temperature (3) Temperature (3) Airflow (7) Power (9) Value 92 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 95
on the switch. HP StorageWorks 2/8q FC (10) - generic fabric port; domain-ctl(11) domain controller; hub-controller(12); scsi(13) - parallel SCSI port; escon(14); storage } ■ Access-Read-only ■ Status-Mandatory ■ Return value-Refer to Table 20 for connUnitPortType return values. HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 96
.1.10.1.4) Bit mask that specifies the classes of service capability of this port. If this is not .1.5) Bit mask that specifies the classes of service that are currently operational. If this is and Class 3) 94 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 97
Fibre Alliance MIB Objects connUnitPortState (1.3.6.1.3.94.1.10.1.5) The user selected state of the port hardware. ■ Syntax-INTEGER {unknown value-Refer to Table 22 for connUnitPortTransmitterType return values. HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 98
Installed SL LL LC SN EL Other Return value Unused (3) Shortwave (4) Longwave (5) LongwaveNoOFC (8) ShortwaveNoOFC (9) Copper (6) Unknown (1) connUnitPortModuleType (1.3.6.1.3.94.1.10.1.9) The module = 0. 96 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 99
■ Status-Mandatory ■ Return value-Operational speed, otherwise returns the administrative speed setting. If 1 Gbps, returns 106250. If 2 Gbps, returns 212500. If 10 Gbps, returns 1062500. HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 100
94.1.10.1.16) This object is used to control the addressed connUnit's port. ■ resetConnUnitPort-If the you do not support write, return invalid. Otherwise, return the last control operation attempted. offline (6) offline (6) unknown (1) 98 HP StorageWorks 2/8q Fibre Channel Switch Simple Network - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 101
Control value Online (3) Offline (6) ResetCounters (8) other Command sent online offline clear counters error returned connUnitPortName (1.3.6.1.3.94.1.10.1.17) A user '10G-18' by default). connUnitPortPhysicalNumber (1.3.6.1.3.94.1.10.1.18 HP StorageWorks 2/8q Fibre Channel - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 102
that specifies the driver level protocol capability Bit mask that specifies the driver level protocol(s) that are the same node WWN. All ports on the same storage subsystem have the same node WWN." ::= { HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 103
external loopback; txfault(6) - Transmitter fault; noMedia(7) - media not installed; linkDown(8) waiting for activity (rx sync) } ■ Access- Installed If SyncStatus = SyncAcquired If SyncStatus = SyncLost Other Return value Failed (2) NoMedia (7) Active (4) LinkDown (8) Unknown (1) HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 104
it can write over previous events. This object is an index into the buffer. HP recommends that this table be read using getNexts to retrieve the initial table. The Status-Mandatory ■ Return value-Table index 102 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 105
(1.3.6.1.3.94.1.11.1.5) This is the sysuptime timestamp when the event occurred. ■ Syntax-connUnitSEventTime ■ Access-Read-only ■ Status-Mandatory ■ Return value-Always returns error status "NoSuchName" HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 106
MIB Objects connUnitEventSeverity (1.3.6.1.3.94.1.11.1.6) The event severity level. ■ Syntax-FcEventSeverity ■ Access-Read-only ■ Status-Mandatory ■ Return value-Always returns error status "NoSuchName" 104 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 107
(1.3.6.1.3.94.1.11.1.9) The description of the event. ■ Syntax-DisplayString ■ Access-Read-only ■ Status-Mandatory ■ Return value-Event description in the form: "[Id][timestamp][severity][module][Description]" HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 108
needed for the link table. This table is accessed either directly if the management software has an index value or via GetNexts. The values of the indexes are not Status-Mandatory ■ Return value-Table index 106 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 109
connUnitID. ■ Syntax-OCTET STRING (SIZE(16)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Remote World Wide Node number for each entry in the link table HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 110
" assigned by Internet Assigned Numbers Authority (IANA) to identify the address format. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory ■ Return value-Always returns 1 (Ipv4) 108 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 111
table connUnitLinkCurrIndex (1.3.6.1.3.94.1.12.1.14) The last used link index. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory ■ Return value-Last used link table index number HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 112
zones in the active zone set. ■ Syntax-INTEGER ■ Access-Read-only ■ Status-Mandatory ■ Return value-Returns the number of zones within the active zoneset 110 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 113
format of the structure. Support of this object is optional. ■ Syntax-OCTET STRING (SIZE(80)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Not supported: always returns SNMP error "NoSuchName" HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference Guide 111 - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 114
zeros - FC address-FC address (3 bytes) followed by 13 bytes of zeros - Domain/Port-Domain/Port address (2 bytes) followed by 14 bytes of zeros 112 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 115
-Returns number of aliases defined connUnitZoningAliasName (1.3.6.1.3.94.1.14.1.4) The alias name. ■ Syntax-DisplayString (SIZE (0..79)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Returns Alias name HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 116
zeros - FC address-FC address (3 bytes) followed by 13 bytes of zeros - Domain/Port-Domain/Port address (2 bytes) followed by 14 bytes of zeros 114 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 117
all objects in statistics table, if the object is not supported by the connUnit, the high order bit is set to order bit is reserved to indicate if the object if supported or not. All objects start at a value of zero port HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 118
the count. ■ Syntax-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Hexidecimal value indicating the total number of bytes received by a port 116 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 119
. ■ Syntax-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Unsupported; always returns high order bit set to 1 with remaining bits set to zero. HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 120
-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Unsupported; always returns high order bit to 1 with all other bits set to zero 118 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 121
. ■ Syntax-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Unsupported; always returns high order bit to 1 with all other bits set to zero HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 122
-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Unsupported; always returns high order bit to 1 with all other bits set to zero 120 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 123
delivered. This is a Fibre Channel-only statistic. ■ Syntax-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Total number of Class3Toss frames for a port HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 124
. This is a Fibre Channel-only statistic. ■ Syntax-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Total number of RxLinkResets received by a port 122 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 125
port. This is a Fibre Channel-only statistic. ■ Syntax-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Total number of TotalOfflineSeqs received by a port HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 126
29.8). This is a Fibre Channel-only statistic. ■ Syntax-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Total number of PrimSeqErrors for a port 124 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 127
. ■ Syntax-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Unsupported; always returns high order bit to 1 with all other bits set to zero HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 128
-OCTET STRING (SIZE (8)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Unsupported; always returns high order bit to 1 with all other bits set to zero 126 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 129
not define a version today. This table is accessed either directly if the management software has an index value or by using GetNexts. The value of the indexes are Mandatory ■ Return value-Name server table index HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 130
server table connUnitSnsClassOfSvc (1.3.6.1.3.94.5.2.1.1.6) The classes of service offered by this entry in the SNS table. that represents the class of service is set to a value of one if the class is supported. Class 1 is bit 128 HP StorageWorks 2/8q Fibre Channel Switch Simple Network - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 131
always returns error status "NoSuchName" connUnitSnsFC4Type (1.3.6.1.3.94.5.2.1.1.9) The FC-4 types supported by this entry in the SNS table. ■ Syntax-OCTET STRING (SIZE value (hexidecimal) 1 2 3 7F 8 82 84 85 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 132
)) ■ Access-Read-only ■ Status-Mandatory ■ Return value-Symbolic node name registered by the device in the name server table. If not registered, returns (NULL). 130 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 133
of platform registration entries. Platform registry is a service hosted by the connectivity unit, in a very can register its attributes and platform nodes with the registry service. The platform table is a flat, double-indexed MIB status "NoSuchName" HP StorageWorks 2/8q Fibre Channel Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 134
name and version identification of the platform's hardware type and software operating system. The Platform description must only contain printable ASCII value-Unsupported; always returns error status "NoSuchName" 132 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 135
wide name) of the node contained by the platform. ■ Syntax-FcGlobalId ■ Access-Read-only ■ Status-Read-only. ■ Return value-Unsupported; always returns error status "NoSuchName" HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 136
8 9 10 trapMaxClients (1.3.6.1.3.94.2.1) The maximum number of SNMP trap recipients supported by the connectivity unit. ■ Syntax-INTEGER ■ Access-Read-only ■ indicating number of configured trap clients 134 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 137
switch SNMP setup parameters. Default is 162. trapRegFilter (1.3.6.1.3.94 or equal to this value. The default value of this object is "warning default values. Traps are not enabled to be sent to the target. If the row already existed, traps are disabled from being sent to the target. HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 138
table, a new row is created. The values of the optional columns are set to default values. Traps are enabled to be sent to the target. If the row already exists, rowActive (3), if valid entry in trap table 136 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 139
occurred TimeDate Module Time stamp of the event Software module where the event was initiated Addr Address in the software module where the event was initiated Descr Description of the event HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference Guide 137 - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 140
Port are always 0. Tag # Chassis Port 27; 33; 0; 0; 0; [TimeDate] [Module] [Addr] [Descr] Event # Blade Figure 2: connUnitEventDescr variable format Table 30 lists the .StateChange, Switch.ResetAlarm, Chassis.OperChange 138 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 141
} coldStart A coldStart trap signifies that the SNMPv2 entity, acting in an agent role, is re-initializing itself and that its configuration may have been altered. HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 142
properly authenticated. While all implementations of the SNMPv2 should be capable of generating this trap, the snmpEnableAuthenTraps object indicates whether this trap is generated. 140 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 143
details for the Fabric Element Management Information Bases (FE-MIB) on the HP StorageWorks 2/8q FC Switch. The following topics are covered: ■ Fibre Channel groups, page 158 ■ Capability group, page 164 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 144
(2), lockedDown(3) } BITS { classF(0), class1(1), class2(2), class3(3), class4(4), class5(5), class6(6) } Unsigned32 Unsigned32 Unsigned32 Unsigned32 Integer32 (1..126) INTEGER { regular(1), alternate (2) } 142 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 145
support its NxPorts. This group consists of scalar objects and the Module Writes are not supported. fcFeElementName (1.3.6.1.2.1.75 supported. fcFeModuleCapacity (1.3.6.1.2.1.75.1.1.3) The maximum number of modules HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 146
-Read-only ■ Status-Current ■ Return value-Configurable description of the module table entry. The default is HP StorageWorks 2/8q FC Switch. fcFeModuleObjectID (1.3.6.1.2.1.75.1.1.4.1.3) The vendor's authoritative identification of the module. This value can be allocated within the SMI enterprises - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 147
sysUpTime when the module entered its current operational that the operational status of the module has not changed since the agent last be contained within the module. Within each module, the ports are supported. HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 148
to support. control in the direction from the attached NxPort (if applicable) to FxPort. ■ Syntax-FcBbCredit ■ Access-Read-only ■ Status-Current ■ Return value-Default number of receive buffers for each port, unless extended credits are used. HP StorageWorks 2/8q FC Switch = 12. 146 HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 149
-Default Default is 2000 (0x7D0) fcFxPortCosSupported (1.3.6.1.2.1.75.1.1.5.1.9) A value indicating the set of classes of service supported supports an Intermixed Dedicated Connection. ■ Syntax-TruthValue ■ Access-Read-only ■ Status-Current ■ Return value-Always returns False (2) HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 150
Stacked Connect supported by the 2 Sequential Delivery is supported by the FxPort. ■ Class 3 Sequential Delivery is supported by the FxPort. ■ support this parameter. ■ Syntax-MicroSeconds ■ Access-Read-only ■ Status-Current ■ Return value-Default ED_TOV parameter is 2000 (0x7D0) 148 HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 151
tables contain operational status and established service parameters for the Fabric Element and attached port in the buffer-to-buffer flow control. The value must be less than or equal Table 33 for fcFxPortOperMode return values. HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 152
procedures } ■ Access-Read-write ■ Status-Current ■ Return value-Refer to Table 34 for fcFxPortPhysAdminStatus read values. Refer to Table 35 for fcFxPortPhysAdminStatus write values. 150 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 153
-Refer to Table 36 for fcFxPortPhysOperStatus return values. Table 36: fcFxPortPHysOperStatus return values Status Online Offline Diagnostic Down Return value online (1) offline (2) testing (3) linkfailure (4) HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 154
Access-Read-write ■ Status-Current ■ Return value-Default RT_TOV parameter is: 100 (0x64). This is service to support from control mechanism is indicated in the respective fcFxPortBbCreditModel. ■ Syntax-FcBbCredit ■ Access-Read-only ■ Status-Current ■ Return value-Unsupported 152 HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 155
whether the FxPort has agreed to support stacked connect from the Fabric Login. This is only meaningful if the ports are using Class 1 service. ■ Syntax-FcStackedConnMode ■ Access-Read-only ■ Status-Current ■ Return value-Always returns none (1) HP StorageWorks 2/8q Fibre Channel Switch Simple - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 156
support Class 2 sequential delivery from the Fabric Login. This is only meaningful if the ports are using Class 2 service support Class 3 sequential delivery from the Fabric Login. This is only meaningful if the ports are using Class 3 service Writes not supported. 154 HP StorageWorks 2/8q Fibre - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 157
of primitive sequence protocol errors detected by the FxPort. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Total number of PrimSeqErrors encountered for a port HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 158
received by this FxPort from the attached NxPort. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Total number of RxLinkResets received by a port 156 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 159
) The number of Offline Sequences issued by this FxPort. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Total number of TxOflineSeqs sent by a port HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 160
delimiters, received by this FxPort from its attached NxPort. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Unsupported; always returns error status "NoSuchName" 158 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 161
the attached NxPort is the source of the connect-request. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Unsupported; always returns error status "NoSuchName" HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 162
delivered through this FxPort to its attached NxPort. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Total number of Class2FramesOut sent by a port 160 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 163
against Class 2 frames. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Total number of FReject frames generated by this port for Class 2 and 3 frames HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 164
, delivered through this FxPort to its attached NxPort. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Total number of Class3WordsOut sent by a port 162 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 165
.1.4.3.1.5) The number of Class 3 frames discarded by this FxPort. ■ Syntax-Counter32 ■ Access-Read-only ■ Status-Current ■ Return value-Total number of Class3Toss discarded by a port HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 166
FxPort is capable of supporting. ■ Syntax-FcphVersion FxPort is capable of supporting. ■ Syntax-FcphVersion ■ Status-Current ■ Return value-Default is 255 (0xFF) fcFxPortCapBbCreditMin (1.3.6.1.2.1.75 Status-Current ■ Return value-Default is 0 (0x00) 164 HP StorageWorks 2/8q Fibre Channel Switch - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 167
the set of classes of service that the FxPort is capable of supporting. ■ Syntax-FcCosCap ■ the port is capable of supporting Class 1 service. ■ Syntax-TruthValue ■ Access supporting. ■ Syntax-FcStackedConnMode ■ Access-Read-only ■ Status-Current ■ Return value-Always returns None (1) HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 168
FxPort is capable of supporting Class 2 Sequential Delivery. FxPort is capable of supporting Class 3 Sequential Delivery. is capable of supporting, in microseconds. supporting, in microseconds. ■ Syntax-MicroSeconds ■ Access-Read-only ■ Status-Current ■ Return value-10 (0x0A) 166 HP StorageWorks - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 169
HP StorageWorks 2/8q Fibre Channel Switch. MIB definitions This MIB replaces the fcFxPortPhysTable module defined in FIBRE-CHANNEL-FE-MIB, and defines volatile control objects for ports in a switch. If the switch gets reset, these values revert back to the default offline (2) HP StorageWorks 2/8q - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 170
to Table 39 for fcQxPortPhysOperStatus return values. Table 39: fcFxPortPHysOperStatus return values Status Online Offline Diagnostic Down Return value online (1) offline (2) testing (3) linkfailure (4) 168 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 171
26, 138 atIfIndex 44 atNetAddress 44 atPhysAddress 44 atTable 44 audience 16 authorized reseller, HP 21 C Capability Group 168 Class 1 Accounting Table 162 Class 2 Accounting Table 164 101 connUnitPortSpeed 101 connUnitPortStatCountAddressErrors 130 HP StorageWorks 2/8q Fibre Channel Switch Simple - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 172
connUnitUpTime 84 connUnitUrl 84 conventions document 17 equipment symbols 18 text symbols 17 Critical 26, 138 D Debug 26, 138 document conventions 17 prerequisites 16 170 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 173
152 fcFxPortID 153 fcFxPortIntermixSuppAgreed 157 fcFxPortIntermixSupported 151 fcFxPortInvalidCrcs 160 fcFxPortInvalidTxWords 160 fcFxPortLinkFailures 159 fcFxPortLinkReseatIns 160 fcFxPortLinkResetOuts 161 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 174
Groups in MIB-II 36 H help, obtaining 20 HP authorized reseller 21 storage web site 21 technical support 20 I ICMP Group 55 icmpInAddrMaskReps 57 icmpInAddrMasks 57 45 ipForwDatagrams 46 ipFragCreates 48 ipFragFails 48 172 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 175
M Management information bases 35 Manager 25 Mark 138 MIB Definitions 146 MIB-II 35 Module Table 148 N Notify 26, 138 P Port Statistics Table 119 Port Table 97 prerequisites 38 sysObjectID 37 sysServices 38 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference - HP StorageWorks MSA1000 | HP StorageWorks 2/8q Fibre Channel Switch Simple Netwo - Page 176
61 tcpRetransSegs 62 tcpRtoAlgorithm 60 tcpRtoMax 60 tcpRtoMin 60 technical support, HP 20 text symbols 17 Transmission Group 70 trap severity levels 19 symbols on equipment 18 web sites HP storage 21 174 HP StorageWorks 2/8q Fibre Channel Switch Simple Network Management Protocol Reference Guide
Reference Guide
HP
StorageWorks
2/8q Fibre Channel Switch
Simple Network Management Protocol
First Edition (November 2004)
Part Number:
A7450-96008
This guide describes the support for Simple Network Management Protocol (SNMP) used with the HP
StorageWorks 2/8q Fibre Channel (FC) Switch. This guide describes how to use SNMP to manage and monitor
the switch.