HP StorageWorks MSA1500 Configuring the HP StorageWorks Modular Smart Array 10
HP StorageWorks MSA1500 Manual
View all HP StorageWorks MSA1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks MSA1500 manual content summary:
- HP StorageWorks MSA1500 | Configuring the HP StorageWorks Modular Smart Array 10 - Page 1
for Booting from a SAN 7 Install the Operating System ...... 7 Install MSA1000/MSA1500cs Drivers and Utilities 7 Configuring the HP StorageWorks Modular Smart Array 1000 and 1500cs for external boot with HP Proliant Blade Servers Abstract: This technical note outlines the steps specifically - HP StorageWorks MSA1500 | Configuring the HP StorageWorks Modular Smart Array 10 - Page 2
the MSA1000 for External Boot 2 Notice © 2007 HP Computer Corporation HP, StorageWorks, Smart Array, SupportPaq, and the HP logo are trademarks of Hewlett Packard Company. Other product names mentioned herein may be trademarks of their respective companies. HP shall not be liable for technical or - HP StorageWorks MSA1500 | Configuring the HP StorageWorks Modular Smart Array 10 - Page 3
the latest copy of the HP StorageWorks Modular SAN Array 1000 and 1500cs Support Software CD. The Support Software CD is located on http://www.hp.com/go/msa1000 or http://www.hp.com/go/msa1500cs and follow the "software, firmware and drivers" link. • Verify that the HBA firmware is at the latest - HP StorageWorks MSA1500 | Configuring the HP StorageWorks Modular Smart Array 10 - Page 4
External Boot 4 Configuring a Boot LUN on the MSA1000 and MSA1500cs NOTE: When referring to the CD drive below, please as a LUN). 7. After you have created a LUN, exit the ACU and exit the MSA Support Software CD. Your server will reboot. 8. Disconnect the Virtual CD from the Virtual Media page. - HP StorageWorks MSA1500 | Configuring the HP StorageWorks Modular Smart Array 10 - Page 5
details including screenshots; please refer to the technical note titled 'Configuring the HP StorageWorks Modular Smart Array 1000 and 1500cs for external boot with Microsoft Windows - 8. In the Select LUN menu, choose the supported LUN. 9. Save the changes by pressing ESC twice. 10. Exit Fast!Util - HP StorageWorks MSA1500 | Configuring the HP StorageWorks Modular Smart Array 10 - Page 6
Blade Servers and Emulex based HBAs Note: For more details including screenshots; please refer to the technical note titled 'Configuring the HP StorageWorks Modular Smart Array 1000 and 1500cs for external boot with Microsoft Windows - New Installations'. 1. As the server boots, the menu for - HP StorageWorks MSA1500 | Configuring the HP StorageWorks Modular Smart Array 10 - Page 7
to install the operating system. Install MSA1000/MSA1500cs Drivers and Utilities There are two methods for installation of MSA1000 Drivers and Utilities. Manual: 1. Browse to the iLO web interface. 2. Select the Virtual Devices tab. 3. Install the MSA Support CD in the drive. 4. Connect the virtual
Technical Note
Revised October 2006
Prepared by:
Network Storage Solutions
Hewlett Packard Company
Contents
Configuring the HP
StorageWorks Modular
Smart Array 1000 and
1500cs for external boot
with HP ProLiant Blade
Servers
Prerequisites
................................
3
Configuring a Boot LUN on
the MSA1000 and
MSA1500cs
..................................
4
Configuring the Server BIOS
......
4
Configuring the HBA Adapter
for Proliant Blade Servers
and QLogic based HBAs
............
5
Configuring the HBA Adapter
for Proliant Blade Servers
and Emulex based HBAs
............
6
Configuring the RDP Server
for Booting from a SAN
..............
7
Install the Operating System
......
7
Install MSA1000/MSA1500cs
Drivers and Utilities
.....................
7
Configuring the HP
StorageWorks Modular Smart
Array 1000 and 1500cs for
external boot with HP Proliant
Blade Servers
Abstract:
This technical note outlines the steps specifically required to
configure the HP ProLiant Blade servers for external boot. Please see the
separate technical notes for your Operating System for OS specific
configuration steps.