HP StorageWorks MSA1500cs HP 1000/1500 Modular Smart Array Firmware Release No
HP StorageWorks MSA1500cs Manual
View all HP StorageWorks MSA1500cs manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks MSA1500cs manual content summary:
- HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 1
HP 1000/1500 Modular Smart Array Firmware Release Notes Part Number: 592436-002 Second edition: March 2011 - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 2
Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L.P. - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 3
at HP test labs. Product models • HP StorageWorks 1000 Modular Smart Array (MSA1000) • HP StorageWorks 1500 Modular Smart Array (MSA1500) Operating systems • HP-UX 11 with various supported levels of VMware. Test Status: Not Verified. Issue could not be reproduced in HP tests. Firmware versions 7. - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 4
supported. Back-flashing firmware will result in a loss of configuration settings. Installation instructions Installation notes and best practices • Before installing new firmware the firmware release notes, device QuickSpecs, and updated user documentation. • Before installing new firmware, ensure - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 5
one of the of the following to open the utility: • Select Start->All Programs->hp msa Utilities->MSA Flash • Double-click the MSA Flash icon on the desktop. • of the firmware bundle, informational pop-up messages may be displayed. Read these messages carefully and follow the onscreen instructions. • - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 6
is not supported for the bundled firmware or hardware configuration, the option is shaded and cannot be selected. • Blink On/Blink Off: Blink the LEDs on the selected MSA, its attached storage enclosures, and the hard drives. • Recommended: Flash All Bundled Firmware on Selected MSA1500 and all - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 7
The host computer must support the 1k Xmodem (Ymodem) protocol. NOTE: For information about accessing and using the CLI, see the HP StorageWorks 1000/1500 Modular Smart Array Command Line Interface User Guide, available on the MSA1000 and MSA1500 websites. 1. Place the downloaded firmware package in - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 8
4. At the CLI prompt, enter the following command: CLI> download firmware offline This command performs an update, but does not automatically restart the MSA; the MSA must be restarted manually. This method is supported for use in both single-controller and dual-controller configurations. 5. On the - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 9
Effective date March 2011 HP 1000/1500 Modular Smart Array Firmware Release Notes 9 - HP StorageWorks MSA1500cs | HP 1000/1500 Modular Smart Array Firmware Release No - Page 10
10
HP 1000/1500 Modular Smart Array
Firmware Release Notes
Part Number: 592436-002
Second edition: March 2011