HP StorageWorks Modular Smart Array 1000 HP 1000/1500 Modular Smart Array Firm
HP StorageWorks Modular Smart Array 1000 Manual
 |
View all HP StorageWorks Modular Smart Array 1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks Modular Smart Array 1000 manual content summary:
- HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 1
HP 1000/1500 Modular Smart Array Firmware Release Notes Part Number: 592436-002 Second edition: March 2011 - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 2
Legal and notice information © Copyright 2011 Hewlett-Packard Development Company, L.P. - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 3
at HP test labs. Product models • HP StorageWorks 1000 Modular Smart Array (MSA1000) • HP StorageWorks 1500 Modular Smart Array (MSA1500) Operating systems • HP-UX used with various supported levels of VMware. Test Status: Not Verified. Issue could not be reproduced in HP tests. Firmware versions - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 4
of configuration settings. Installation instructions Installation notes and best practices • Before installing new firmware, review system requirements, enhancements list, fixes list, and other information in the firmware release notes, device QuickSpecs, and updated user documentation. • Before - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 5
number, and user-defined name • Currently installed version of MSA controller firmware ROM • Currently installed version of fan control module firmware on each discovered MSA. 7. In the displayed list of discovered controllers, select a controller to update. HP 1000/1500 Modular Smart Array Firmware - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 6
is not supported for the bundled firmware or hardware configuration, the Power on/Standby button to restart the MSA. g. Wait (up to eight minutes) for the STARTUP COMPLETE message to display on the MSA controller LCD panel. NOTE: In dual-controller configurations, firmware on the two controllers - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 7
to the MSA. • The host computer must support the 1k Xmodem (Ymodem) protocol. NOTE: For information about accessing and using the CLI, see the HP StorageWorks 1000/1500 Modular Smart Array Command Line Interface User Guide, available on the MSA1000 and MSA1500 websites. 1. Place the downloaded - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 8
manually. This method is supported for use in both single-controller and dual-controller configurations Power cycle Power on/Standby button for approximately five seconds to place the MSA in Standby mode. b. Power controller LCD panels. When the cloning process is complete, the just-updated controller - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 9
Effective date March 2011 HP 1000/1500 Modular Smart Array Firmware Release Notes 9 - HP StorageWorks Modular Smart Array 1000 | HP 1000/1500 Modular Smart Array Firm - Page 10
10
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
 |
 |
HP 1000/1500 Modular Smart Array
Firmware Release Notes
Part Number: 592436-002
Second edition: March 2011