HP StorageWorks P9000 HP StorageWorks P9000 Remote Web Console Messages (AV400
HP StorageWorks P9000 - Disk Arrays Manual
 |
View all HP StorageWorks P9000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StorageWorks P9000 manual content summary:
- HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 1
HP StorageWorks P9000 Remote Web Console Messages Abstract This document lists the error codes and error messages for HP StorageWorks P9000 Remote Web Console for P9000 disk arrays, and provides recommended action for the error conditions. HP Part Number: AV400-96351 Published: January 2011 Edition: - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 2
Computer Software, Computer Software Documentation, and Technical Data for Commercial Items are licensed to the U.S. Government under vendor's standard commercial license. The information contained herein is subject to change without notice. The only warranties for HP products and services are - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 3
messages and error codes 6 P9500 messages...6 Message window format...6 Advanced message window...7 Remote Console-Remote Web Console error codes 9 2 Message (part code group 0nnn 10 Part code 0001...10 Part - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 4
Part code 3205...96 Part code 03222...100 Part code 3305...101 6 Message (part code group 4nnn 106 Part code 4005...106 Part code 4010...109 7 Message (part code group 5nnn 110 Part code 5105...110 Part code 5107...112 Part code 5110...112 Part code 05121...112 Part code 05122...113 Part code 5205 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 5
code 20522...310 Part code 20624...310 14 Support and other resources 311 Contacting HP...311 Subscription service...311 Related information...311 HP websites...311 Conventions for storage capacity values 312 Typographic conventions...312 HP product documentation survey 313 Glossary 314 Index - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 6
P9000 in this guide refers to the following disk array: • P9500 Disk Array The GUI illustrations in this guide and error codes released by the storage system. P9500 messages "Sample message window 1" (page these variables are determined when processing is performed. Messages with a part code 60xx ( - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 7
any recommended actions. In these circumstances, take actions based on instructions with the part code and the error code provided in this manual. Part code Part Code in the table shows an ID of the application that issued the message, and it is configured with a four- or five-digit number. In some - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 8
table that is linked to the changed result of each item to refer to the error. The advanced message window is also referable from the task window. (For details about the task window, see HP StorageWorks P9000 Remote Web Console User Guide.) However, each detailed result might not be displayed at the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 9
solutions to the Remote Web Console for P9500 errors, see "Error codes (part code 0001)" (page 10) and subsequent tables of this manual or the Troubleshooting chapter in the user guides blank. In these circumstances, take actions based on instructions provided in the error message and based on what - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 10
the number of set W the maximum (20000). operations, and perform again. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 11
contact HP Technical Support. Support. The user name or the password is invalid. Enter a correct user name or a password. W An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact W HP Technical Support. An - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 12
this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. 12 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 13
occurred during SVP An error occurred. If this problem E processing. If this problem persists, persists, please contact HP Technical please contact HP Technical Support. Support. The content of the management file of If the same problem persists despite E the audit log is invalid. retrying - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 14
transfer to the FTP server failed. Check the setting. W Check the user ID and the password. The file transfer to the FTP server failed. problem persists, please contact E If this problem persists, please contact HP Technical Support. HP Technical Support. The complete operation is performed to - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 15
refresh the configuration. If this problem persists, please contact E HP Technical Support. If this problem persists, please contact E HP Technical Support. If this problem persists, please contact E HP Technical Support. If this problem persists, please contact E HP Technical Support. If this - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 16
when a user in View mode selects the Exit button, but this is not a problem. In other cases, please contact HP Technical Support. The storage system is in the internal Wait, then click [Refresh] on the [File] W process, or some other user is changing menu or login again. the configuration. An - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 17
processes are conflicting at DKC. Check if the configuration changing W process by RAID Manager, Auto LUN, or Quick Restore is not in the operation, then retry the operation. The Login could not be performed Please contact HP Technical Support. E because a function failed to start during SVP - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 18
while connecting to Wait, then retry the operation. E the storage system. If the same problem persists despite retrying, please contact HP Technical Support. 0003 2016 0003 2017 0003 2022 0003 0003 2032 2033 0003 2083 A service engineer is accessing the Wait, then retry the operation - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 19
cannot be performed, Wait a while, then retry the operation. E because an inoperative processor exists. If the same problem persists, please contact HP Technical Support. An error occurred while connecting to Click [Refresh All] on the [File] menu, W the storage system. The configuration then - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 20
could not be used because Click [All Refresh] and refresh the a function failed to start during SVP configuration. If this problem persists, initialization. please contact HP Technical Support. Severity Level E E Part code 0006 Table 6 Error codes (part code 0006) Part Code 0006 Error Number - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 21
. An error occurred while reading a file. If this problem persists, please contact W HP Technical Support. The file to be downloaded was not found. The specified file was not found. Check W whether the file exists and retry the operation. Another user is downloading the file or Wait for a while - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 22
An error occurred during processing. If If this problem persists, please contact E this problem persists, please contact HP HP Technical Support. Technical Support. The system cannot apply the new Click [Refresh], and retry the operation. W configuration. Do you want to refresh? The capacity for - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 23
this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. An - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 24
version of JRE. E Install the supported version of JRE, then retry the operation. Modify mode released due to inactivity. Get back to the Modify mode and E Another user or service engineer may change the configuration again. have changed the configuration while the Modify mode was released - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 25
, there is no problem. If configuration changes have been made incorrectly, retry the operation. 0110 59002 0110 59003 0110 59105 0110 65092 0110 67005 0110 69007 0110 69028 The storage system is in internal process, Wait for a while, then click [OK] and W or some other user is changing the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 26
to the E obtained. DKC. If the same problem persists despite retrying, please contact HP Technical Support. The free space for storing audit log files - Recommended Action The characters used for the user name or the number of the characters of the user name is invalid. Check the setting(s). - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 27
retry E because the number of registered users the operation. has reached the maximum. The same User Name is already Specify another user name. W registered. The specified operation cannot be done, Change the password on the external E because the authentication type of the authentication - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 28
not exist. Check the specified user information. E Failed to get the user information. Check the specified user information. W Failed to get the user group information. If the problem persists despite retrying, W please contact HP Technical Support. Part code 0290 Table 15 Error codes (part - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 29
List Edit Permission) Please contact HP Technical Support. - A permission error occurred. (User Option Panel View Permission) Please contact HP Technical Support. - Failed to open the user account list file. Please contact HP Technical Support. - Failed to open the user account list file. If - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 30
HP Technical Support. Failed to back up the environment file. Please contact HP Technical Support. Failed to open the user account list file. Please contact HP Technical Support. The user information file. If this problem persists, please contact HP Technical Support. File format error. Specify - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 31
operation. The size of the user account list file is too Check problem persists, please contact HP Technical Support. Failed to create the file. If this problem persists, please contact HP Technical Support. Failed to create the file. If this problem persists, please contact HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 32
the file. If this problem persists, please contact HP Technical Support. Failed to delete work files. If this problem persists, please contact HP Technical Support. Failed to delete work files. If this problem persists, please contact HP Technical Support. The configuration has completed. You - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 33
storage partition administrator. 0 cannot be specified in all the fields. The SVP OS does not support IPv6. Recommended Action If this problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support. If this problem persists, please contact HP - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 34
0405 5071 0405 5072 Error Message Recommended Action Severity Level An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred when installing or removing the program product. Please select the program product and select [Detail - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 35
Access Volumes • Smart Tiers >>>>> Thin Provisioning Severity Level W 0405 5074 0405 5075 The specified PP ID is invalid. This key code is invalid. Retry again. If it occurred again, contact W HP Technical Support. Any of the following is thought to be the W problem. Reissue the key code. • Key - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 36
Tiers >>>>> Thin Provisioning 0405 5079 0405 5080 0405 5501 This program product needs another DKC type. You cannot change this program product. The trial days have exceeded the specified extended days. Please contact HP Technical Support. W Please contact HP Technical Support. W Please confirm - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 37
during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. An error occurred during SVP processing - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 38
to install it because of If this problem persists, please contact E PP of pre-install. HP Technical Support. This function cannot be used by the storage partition administrator. If the same problem persists despite E retrying, please contact HP Technical Support. 38 Message (part code group - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 39
persists, please contact HP Technical Support. Severity Level E An error occurred. If this problem E persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. If this problem persists, please contact E HP Technical Support. Part code 0407 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 40
cannot be performed. The length refer to the license key information. Retry the same operation several times. E If the same error occurs, contact HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 41
or some other factor). If this problem persists, please factor). contact HP Technical Support. An error occurred while connecting with If the same problem persists despite E the storage system. retrying, please contact HP Technical Support. The storage system is online to the mainframe host - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 42
. If this problem persists, please contact E HP Technical Support. The number of external volumes that can Reduce the number of external volumes W be registered in the storage system has registered in the storage system, then reached the maximum. retry the configuration operation. The - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 43
please contact HP Technical Support. The Disconnect External Storage Systems Execute the Disconnect External Storage W or the Disconnect External Volumes is not Systems or the Disconnect External executed for the target volume. Volumes, then retry the operation. The configuration of Continuous - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 44
memory for External Storage is not installed. The extended shared memory for W External Storage needs to be installed. Please contact HP Technical Support. The configuration changing processes are conflicting at DKC. Check if the configuration changing W process by RAID Manager, Auto LUN - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 45
contents of the spreadsheet. W The number of external LUs that can be Delete unnecessary external LU(s), then W connected from a single port has retry the operation. exceeded the maximum value. The number of registered ports of the Operate within the ports of the W external storage system has - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 46
operation tags are defined. Check the contents of the spreadsheet. W The syntax of the parameter is invalid. Check the syntax of parameter. W The volume in the local storage system Specify the volume in an external storage W cannot be operated. system. A correct parameter as a data transfer - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 47
system W in the items to be maintained. disk. If the status cannot be restored, please contact HP Technical Support. The Disconnect External Storage Systems Change the status of the associated Thin W or the Disconnect External Volumes Provisioning volume to blocked, then cannot be executed - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 48
volume. Check the states of the external volume W and the mapping path, and do not retry the operation until the states return to normal. If the states cannot be restored to normal, or if the problem persists despite retrying, please contact HP Technical Support. 0605 78031 0605 78032 0605 78047 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 49
Check the contents of the path W set because the path configuration is configuration. different. Failed to allocate a LDEV ID. Check the setting(s). W Failed to allocate a SSID. Check the setting(s). W The external volume is not supported. Resolve the cause of the error, or only W select - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 50
change has been completed. The specified external storage system does not exist in the configuration. Refresh the window, then retry the E operation. If the same problem persists despite retrying, please contact HP Technical Support. The specified mapping path does not exist in the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 51
then retry the E an internal logic contradiction. operation. If the same problem persists despite retrying, please contact HP Technical Support. The filter was set to the table because an If you want to display the external i external volume that could not be used volumes that cannot be used - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 52
Part code 0810 Table 24 Error codes (part code 0810) Part Code 0810 0810 Error Number 65645 65646 Error Message Enter up to 2,048 alphanumeric characters. Enter alphanumeric characters only. Recommended Action Enter up to 2,048 alphanumeric characters. Enter alphanumeric characters only. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 53
information again. An error occurred during SVP processing. If this problem persists, please contact W HP Technical Support. The specified port does not exist. Or the The configuration information has been W specified port type is not Fibre port. changed already. Check the settings - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 54
information has been W changed already. Check the settings, and request the configuration information setting again. LUN security setting has been made to a non-Fibre port. LUN security is a function of LUN Manager. Check the specified contents, then retry W the operation. Security Switch Off - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 55
been W changed already. Check the settings, and request the configuration information setting again. An error occurred. If this problem Check the setting(s), then retry the W persists, please contact HP Technical operation. Support. You cannot specify the default nickname Correct the specified - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 56
instructions are set to the same port. The same setting is specified at LUNM operation. The configuration configured as a Correct settings, then retry. W command problem persists, please contact E HP Technical Support. The specified path cannot be added, Correct the specification or external port - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 57
the volume is being used as a quorum disk. The specified volume cannot be set as a Check the setting. W command device, because it is being used as a quorum disk. An error occurred during SVP processing. If this problem persists, please contact W HP Technical Support. Part code 1005 57 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 58
version. The operation cannot be performed, Wait a while, then retry the operation. W because an inoperative Processor exists. If the same problem persists. Please contact HP Technical Support. An error occurred while connecting to the storage system. The configuration may be inconsistent. Click - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 59
E does not match the current configuration operation. information. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The specified port is not because the attribute of the specified port is Initiator or External. Part code 1005 59 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 60
58576 A communication time-out error occurred Wait, then retry the operation. W in the storage system. If the same problem persists despite retrying, please contact HP Technical Support. 1005 65660 1005 75009 The Thin Provisioning volume is not associated with a pool. Associate the Thin - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 61
However, this host group is connected to a volume that cannot be used for External Storage. Detail button pressing detection without Select one table row. W line selection. The retry again. If the same problem persists despite retrying, please contact HP Technical Support. Part code 01022 61 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 62
(s) and retry the operation. When there is, close the window(s) and refresh it, then retry again. If the same problem persists despite retrying, please contact HP Technical Support. [Detail] is clicked without selecting table Select one table row. W rows. [Detail] is clicked in the state of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 63
Check the setting(s). W Changing to the external or the initiator Check the setting(s). W configuration. Retry the operation. If the same problem E occurs again, close the windows, refresh it, then retry again. If the same problem persists despite retrying, please contact HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 64
the user. Install the program product. Or, execute W the operation with the user who has an editorial permission, or set the editorial permission to the user. RCU W has been set to the Host Group #00 of Target to Initiator/External, set only 00 the specified port. to the host group of the target - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 65
The process cannot be continued, because there is no necessary data for the configuration. Refresh the window, then retry the operation. If the same problem persists despite retrying, please contact HP Technical Support. 01022 106504 01022 106505 01022 106506 No more host groups cannot be added - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 66
Error Message Recommended Action Severity Level Failed to get the configuration information. Refresh the window, then retry the E operation. If the same problem persists despite retrying, please contact HP Technical Support. The specified host group is not registered. Please confirm - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 67
W group is "4C." Only a External Storage volume can be specified. An error occurred. If the problem persists despite retrying, E please contact HP Technical Support. An error occurred. If the problem persists despite retrying, E please contact HP Technical Support. When you switched the host - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 68
problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. Insufficient permission to operate this. Please contact HP Technical Support Message Recommended Action The user name is incorrect. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 69
to be executed. The specified command is not supported. Check the User Guide. W Insufficient permission to operate this. The following role is required for this W operation. • Storage Administrator (Initial Configuration) Contact the security manager, and register the user to User Group who has - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 70
Table 28 Error codes (part code 1310) (continued) Part Code 1310 Error Number 69055 Error Message You cannot use multi-byte characters. 1310 69066 It is not a CFL_CLI tool enabled SVP microcode. Recommended Action Remove the multi-byte characters and retry. Check whether the CFL_CLI tool is - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 71
information setting again. An error occurred during SVP processing. If this problem persists, please contact W HP Technical Support. LU path is set to a volume which links as The configuration information has been W an expanded LU. changed already. Check the settings, and request - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 72
disk array and request the configuration external LUs. the operation. The LUSE volume cannot be configured Check the attributes of the external W because the external Array Management is required. The specified volume cannot be assigned Select another volume. W as an LUSE volume or a command - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 73
status and the current W status of the configuration setting. If necessary, re-execute the setting operation. The operation cannot be performed, Please contact HP Technical Support , E because the SVP microcode version does when the same problem persists. not match the DKCMAIN (subsystem) microcode - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 74
the Thin Provisioning volumes W with the same pool, then retry the operation. The LUSE operation cannot be Check the setting. W performed, because the specified volume is being used as a quorum disk. The description of the operation tag is Check the contents of the spreadsheet. W invalid. The - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 75
stop processing, click [Cancel]. Are you sure you want to perform the To continue this operation, click [OK]. i LUSE operation using volumes that have To cancel this operation, click [Cancel]. different CLPR numbers? The LUSE volume configuration cannot Delete the path set to the LUSE volume, W be - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 76
while connecting to If this problem persists, please contact E the subsystem. HP Technical Support. Copying is in progress for Remote Wait for a while, then retry the W Copy, Business Copy, Business Copy operation. Z, Snapshot, or Auto LUN pairs. The configuration of Remote Copy, Business - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 77
be performed Check HP Technical Support. E because the system cannot access the specified LDEV. One of the following is defined: a Release the pair definition or delete W Remote Copy pair, a Continuous command devices defined by Business Access Journal pair, or a Continuous Continuity Manager - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 78
Z, or Snapshot is defined. problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 79
error occurred in the disk subsystem. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred while connecting to If this problem persists, please contact E the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 80
. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The logical - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 81
, and retry W the operation. A communication time-out error occurred in the disk subsystem. If this problem persists, please contact E HP Technical Support. V-VOL management area is being used. Delete the Snapshot pair(s), then retry W the operation. The specified operation cannot be Check the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 82
disk subsystem. If this problem persists, please contact E HP Technical Support. The specified operation cannot be Resynchronize the pair or release the W performed, because the Snapshot the pool W Thin Provisioning volume is included in volume and the Thin Provisioning volume. the items to - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 83
during SVP processing. If this problem persists, please contact E HP Technical Support. The number of Thin Provisioning Check the current configuration of W volumes that can be associated with a association. single pool has exceeded the maximum. The disk storage system is executing the Wait - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 84
in Web Console window, then check the pool status in the pool window. the storage system. If this problem persists, refer to the • The pool volume is blocked. troubleshooting section in the Provisioning Guide for Open Systems. 3005 68798 3005 68799 3005 68802 3005 68818 3005 68819 3005 68820 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 85
by Continuous Access Synchronous or External Storage Access Manager. Wait until the process of Continuous E Access Synchronous or External Storage Access Manager is completed, then retry the operation. If this problem persists, please contact HP Technical Support. 3005 68825 The specified volume - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 86
be executed, Check the specified logical volume, then W because the specified logical volume is retry the operation. a quorum disk. The operation cannot be executed, because RAID levels of the specified logical volumes do not match. Check the specified logical volumes, then W retry the operation - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 87
configuration information. W is not for Smart Tiers use. The DKC is set to the state of suppression of pool shrinking. Please contact HP Technical Support. E The storage relocated, or abort it. Provisioning Volume belongs to is the specified pool has following problems. • The pool usage exceeds - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 88
. If this problem persists, please contact • The V-VOL is blocked. HP Technical Support. • The V-VOL is being formatted. Severity Level E 3005 78046 3005 78047 3005 78048 3005 78049 3005 78052 3005 78053 3005 78054 3005 78059 3005 78060 3005 78061 The storage system is in the state that - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 89
pool volume had volume that is set to the specified pool, one of the following problems. then retry the operation. • It is not a pool volume. • The pool volume is the setting(s). The specified LDEV is a remote command Check the setting(s). device. Severity Level W W W W W W W W W - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 90
set as a Check the setting(s). W quorum disk volume. The selected LDEV has an access Check pool. If the same problem persists despite retrying, please contact HP Technical Support. The target LDEV is setting(s). W selected. LDEVs with different RAID levels are Check the setting(s). W - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 91
Table 33 Error codes (part code 03022) (continued) Part Error Code Number 03022 105166 03022 105167 03022 105168 03022 105169 03022 105170 03022 105171 03022 105173 03022 105174 03022 105175 03022 150176 03022 105177 03022 105178 03022 105179 03022 105180 03022 105181 03022 105182 03022 105183 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 92
retry the operation. E If the same problem persists despite retrying, please contact HP Technical Support. The same SSID is specified. Specify Check the setting(s). E External. There is no output file. Please operate it again after executing E Shredding. An LDEV that Snapshot is set has been - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 93
functionality is not available. Open Check the setting(s). Volume Management is required. The pool or the pool volume that is retry the operation. The setting cannot be performed, because the number of pools exceeds the maximum. Check the support configuration of pools, W then retry the operation - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 94
Table 35 Error codes (part code 03122) (continued) Part Error Code Number 03122 106010 03122 106011 03122 106012 03122 106013 03122 106014 03122 106015 03122 106016 03122 106017 03122 106018 03122 106019 03122 106021 03122 106022 03122 106023 03122 106024 03122 106025 03122 106026 03122 106027 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 95
associated Thin Provisioning W because the specified pool is associated volume, then retry the operation. with a Thin Provisioning volume. The defined as the pool of Snapshot. The shrinking operation cannot be Check the setting of pool capacity, pool W performed on the specified pool because - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 96
retry the with a Thin Provisioning volume (V-VOL). operation. The problem persists, please factor). contact HP Technical Support. An error occurred while communicating If the same problem persists despite E with the storage system. retrying, please contact HP Technical Support. The storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 97
be performed because problem persists, please contact E HP Technical Support. The number of V-VOLs that can be registered in the storage system has reached the maximum. Reduce the number of V-VOLs registered W in the storage system, then retry the configuration operation. The configuration - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 98
. Release the configuration definition of W Compatible FlashCopy, then retry the operation. An error occurred on the DKC side. If this problem persists, please contact E HP Technical Support. An error occurred on the DKC side. If this problem persists, please contact E HP Technical Support. An - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 99
the items to be maintained. disk. If the status cannot be restored, please contact HP Technical Support. The number of Thin Provisioning volumes Check the configuration of the current W that can be made in a single pool has V-VOL. exceeded the maximum. The storage system is in process to delete - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 100
If the same problem persists despite E retrying, please contact HP Technical Support. The process cannot continue due to Execute refresh. E internal logic contradiction. The association information of the Execute refresh. E specified LDEV does not exist in the configuration. The status - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 101
are not defined. 3305 1036 The size of the specified volume is outside the setting range. Recommended Action Severity Level If this problem persists, please contact E HP Technical Support. The size of volume that can be set differs W by the type of emulation. Check the setting range of each - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 102
, please contact E HP Technical Support. An error occurred during a VLL operation If this problem persists, please contact E to add or delete customized volumes. HP Technical Support. Please wait for a while, and then retry the operation. To perform a VLL operation on an external volume, check - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 103
Copy. Business Copy, Business Copy Z, or Snapshot setting exists. Release the setting(s) or stop . host. Processing cannot be performed because Check the settings, then Manager, then retry the Journal Z pair. operation. Alternatively, command devices defined by Business Continuity Manager - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 104
retry the operation. W Z, or Snapshot is defined. If the Quick problem persists, please contact HP Technical Support. The specified volume is used as a System Restore the blockage status of the system W Disk volume. disk. If the status cannot be restored, please contact HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 105
conflicting at DKC. Check if the configuration changing W process by RAID Manager, Auto LUN, or Quick Restore is not in the operation, then retry the operation. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 106
SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The status of the disk subsystem requires Check the status of the disk storage E maintenance (for example - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 107
4005 55538 4005 55539 An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The specified extent is over the size which can be specified - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 108
function is not available Install the required program product. W because it requires Mainframe Array Management. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An LDEV number that does not apply to Check the setting. W the selected - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 109
change the same configuration again. Check the DKC status. If the same error occurs, please contact HP Technical Support. The value specified out to the To perform the prestaging operation, i selected LDEV. Do you want to continue? click [Yes]. To not perform the prestaging operation, click - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 110
processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. This functionality is not available because Install the required program product. W Performance Monitor is not - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 111
might be Change the monitoring switch to W deleted by another user's operation. "Enable" for collecting data, then perform the operation. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 112
An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. Part code 5107 Table 42 Error codes display the hyphens(-) are displayed in place of performance statistics of the volumes. performance statistics. Do you want to continue the operation? - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 113
monitored WWNs will be deleted. To continue processing, click [OK]. To W Do you want to continue? stop processing, click [Cancel]. The graphs of some performance objects When you display the graphs in i cannot be displayed in Short-Range Short-Range, set CUs or WWNs to be because CUs or WWNs - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 114
disk subsystem is in internal process, If the same problem occurs again, close E or some other user is changing the the windows, and retry the operation configuration operation. If the same problem persists despite retrying, please contact HP Technical Support. 05122 107002 The process cannot - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 115
nothing W changes, please contact HP Technical Support. The specified volume is already reserved. Click [Refresh All] on the [File] menu, W The configuration information on such then retry the operation. If the same as a volume (LDEV) displayed on the problem persists despite retrying, please - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 116
All] on the [File] menu, W be set in the storage system exceeds the then retry the operation. If the same maximum. The configuration information problem persists despite retrying, please on such as a volume (LDEV) displayed contact HP Technical Support. on the window might be out of date. The - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 117
of the number of movement plans described in the Auto LUN User Guide for the relation between the number of plans that can be made HP Technical Support. The command was rejected due to one Recover the blocked volume, then retry W of the following reasons. the operation. Also, the system disk - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 118
Copy can be migrated. The specified volume(s) are already used See "Supported and prohibited source W by Business Copy Z or Business Copy. and target volumes" in the HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide if the volumes of Business Copy Z or Business Copy can be - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 119
or R-VOL of Continuous Access Synchronous, or Continuous Access Synchronous Z. The RAID level of the target volume is not Retry the same operation. If nothing W supported. changes, please contact HP Technical Support. The specified volume(s) are already used Specify another volume. W by - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 120
Auto LUN User Guide.. The specified volume is not defined as Retry the operation. W the target volume of Auto LUN. This function has already executed. Wait for a moment and retry. E An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. 120 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 121
Technical Support. The disk subsystem is busy. Please wait Retry the same operation several times. E for a while, and then retry the operation. If the same error occurs, please contact HP Technical Support. Please check pair status. If this problem persists, please contact W HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 122
several times. E hihsmldv.ini. The file may not exist in the If the same error occurs, please contact specified directory. HP Technical Support. Failed to get configuration information. Retry the same operation several times. E The file may not exist in the specified If the same error occurs - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 123
. The storage system status is invalid. This function is not supported. This function is not supported. An HP Technical Support. Retry the same operation several times. E If the same error occurs, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 124
occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The specified volumes cannot be used Term." "Sampling Term." The owner ID of the disk subsystem used Select a volume that has the same owner W by the user does not match the owner ID ID. of the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 125
this problem persists, please contact E HP Technical Support. The specified volume(s) are already Select another volume. W being used as Snapshot Access Journal Z volume, and the specified target volume is an external volume. Therefore, the specified volumes cannot be used for migration. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 126
migration target. resync for Continuous Access Journal or Continuous Access Journal Z. See "Supported and prohibited source and target volumes" in the HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide. 5205 55600 The specified volume is used as a volume The volume of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 127
be migrated, see "Auto LUN with internal volume of OPEN-V and a Thin Thin Provisioning virtual volumes" in the Provisioning volume of OPEN-0V. HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide. Because the composition is being backed Wait for a while, then retry the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 128
Provisioning whose capacity is being expanding operation. added. The configuration changing processes are conflicting at DKC. Check if the configuration changing W process by RAID Manager a quorum disk. The manual migration instructions to 8 or less, then retry the operation. 128 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 129
does not support the storage system. stop processing, click [Cancel]. The specified instructions will be reset. To continue processing, click extends across To continue processing, click [OK]. To i multiple SLPRs. If you perform this stop processing, click [Cancel]. operation, the storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 130
configuration information again. This port is not properly equipped. Retry the same operation. If nothing W changes, please contact HP Technical Support occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 131
specified content, and retry. W This function is not available. Performance Monitor is required. Install a program product as required. E An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 132
configuration information to recover from the error. If this problem persists, please contact HP Technical Support. 5305 56524 5305 56525 5305 56526 5305 57101 This function cannot be used by the storage , please contact the storage administrator. To perform To perform other operations, please - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 133
refresh the configuration information to recover from the error. If this problem persists, please contact HP Technical Support. 5305 58576 A communication time-out error occurred The error may be caused by a temporary E in the disk - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 134
5307 5128 5307 6012 Error Message Recommended Action Severity Level An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The specified Performance Control group Check the specified content, and retry. W is not registered. The number of the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 135
HP Technical Support. Time out error. If the problem persists despite retrying, W please contact HP Technical Support. Time out error. If the problem persists despite retrying, W please contact HP Technical Support. The storage the MCU and RCU. or RCU configuration and the condition of the paths - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 136
in the storage system. The operation was rejected due to a 'FREEZE' state. If this was a path operation retry after W the problem has been fixed Delete the group setting, then change the port type. Please contact HP Technical Support. E The specified number of paths is not W within the acceptable - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 137
the specified operation. The version of the microcode on the W XP512/XP48 Disk Array does not support the specified function or operation. Please contact HP Technical Support. The number of minimum paths exceeds Add the normal path(s), then set the W the number of normal paths. minimum - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 138
number, SSID and link W address of the RCU, and set the correct value. Then retry the operation. If the same error occurs, please contact HP Technical Support. The specified RCU or SSID contains some Delete all Remote Copy volume pairs of W Remote Copy volume pairs. the specified RCU or SSID, and - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 139
on the W 9900 storage system does not support the specified function or operation. Please contact HP Technical Support. Specified M-VOL may be and retry the operation 6005 8756 6005 8757 6005 6005 8758 8759 MCU disk array cache is not active. One side of the Cache or shared memory on - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 140
volume is specifed, the please contact HP Technical Support. R-VOL view the License Key window at the RCU side to check the licensed capacity for Mainframe Array Management. If the licensed capacity for Mainframe Array Management configuration of the RCU. 140 Message (part code group 6nnn) - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 141
6005 8788 6005 8789 6005 8790 6005 8791 6005 8792 Combination of MCU with RCU controller type is not supported. Check the controller type of the specified W MCU and RCU, then contact HP Technical Support. One side of the Cache or shared memory on the RCU is blocked. There is an invalid cache - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 142
Table 50 Error codes (part code 6005) (continued) Part Code 6005 Error Number 8795 Error Message Recommended Action Severity Level The operation failed because the specified M-VOL applied to any of the following: Check the status of the specified M-VOL W from the host or the SVP. • A T-VOL - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 143
Verify the configuration of the HP Technical Support. E Please wait a few minutes and retry the Add Pair(Paircreate)/Resume Pair(Pairresync). Retry the operation in a few minutes. W If this problem persists, select the volumes where the error occurred, execute the Delete Pair (Pairsplit-S) command - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 144
link W address and controller ID of the RCU, and set the correct value. Then retry the operation. If the same error occurs, please contact HP Technical Support. Suspend(Pairsplit-r) operation is not valid Suspend mode is not valid for the R-VOL. W for R-VOL. Check the volume, and retry. The - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 145
and controller ID of the RCU, and set the correct value. Then retry the operation. If the same error occurs, please contact HP Technical Support. The specified volume is not a R-VOL. Refresh the window, and check whether W the specified volume is a R-VOL. R-VOL status change failed after - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 146
. E The specified port is not equipped. Refresh the window, then retry the W operation. If the same problem persists despite retrying, please contact HP Technical Support. 6005 8890 6005 8891 The specified port is being initialized. Logical paths exist on the MCU port. Wait for a while - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 147
Support. E No more space is left in MCU for differential management. If the extended shared memory (SM #2) E is not installed in MCU, install the shared memory to MCU according to the installation instruction of the extended shared memory for remote copy ("Shared Memory Size Configuration - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 148
shared memory to E RCU according to the installation instruction of the extended shared memory for remote copy ("Shared Memory Size Configuration" dialog box). Specify a correct value. W Please contact HP Technical Support. E Please contact HP Technical Support. E Delete the LUs defined on the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 149
operation failed. The version of the specified RCU does not support Remote Copy with the NAS volume. Check the microcode version of the RCU. W The specified M-VOL cannot be used. Check the LUN of the specified M-VOL W by using RAID Manager, and specify the LUN with the value less than 1,024 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 150
the status of the specified R-VOL. W specified R-VOL is an external volume. The operation failed because the licensed capacity of Mainframe Array Management on the RCU side was exceeded. Confirm the licensed capacity Mainframe W Array Management on the RCU side. To execute this operation, purchase - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 151
storage partition administrator. Please contact HP Technical Support. E An error occurred during SVP processing. If the problem persists despite retrying, E please contact HP Technical Support the RCU runs on the configuration other than the 2DC configuration in which the Continuous Access - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 152
key that allows you to use a larger capacity or install Open System Array Management on the MCU. The specified M-VOL is already used as Use another being used by Snapshot. A pair cannot be created because the Specify another volume. W specified R-VOL is being used by Snapshot. A pair cannot - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 153
See the user's guides of Continuous configuration changing W process by RAID Manager, Auto LUN, or Quick Restore is not in the operation, then retry the operation. The operation failed because the specified M-VOL was used as a Thin Provisioning Install Disaster Recovery Extended W volume of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 154
is a by other program products such as Thin Provisioning volume, is already used Business Copy/Snapshot, and Auto LUN, by another program product. memory Contact the Support Center, and check E might be insufficient. the shared memory. Please contact HP Technical Support. 6005 68796 6005 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 155
configuration W in which the Continuous Access Journal cooperates. Set "Track" to the "Difference Management," then retry the operation. 6005 68826 6005 68827 6005 68829 6005 68830 6005 68844 6005 68845 6005 68846 6005 68847 6005 68872 6005 68873 The operation failed, because the External Storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 156
, because the Select another volume. W specified volume was used as a system disk. The operation failed, because the quorum disk was inaccessible. Check the following conditions on the W external volume specified for the quorum disk. • If it is blocked. • If a path is defined. 6005 68883 6005 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 157
. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. A time-out error occurred. If the problem persists despite retrying, E please contact HP Technical Support. Part code - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 158
the entered values, then specify W Check the values and then specify correct values. correct values. An error occurred in the client logic. Please contact HP Technical Support. E An error occurred in the client logic. Please contact HP Technical Support. E 158 Message (part code group 6nnn) - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 159
problem persists, please contact this problem persists, please contact HP HP Technical Support. Technical Support. The system cannot apply the new Click [Refresh], and retry. configuration to exchange the Follow the instructions in the message. i specified , and then perform the necessary changes - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 160
Table 52 Error codes (part code 6010) (continued) Part Code 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 6010 Error Number 9073 9075 9100 9101 9102 9103 9104 9105 9106 9107 9111 9112 9113 9114 9115 9116 9117 9118 Error Message Recommended Action Severity - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 161
to export pair status? To output pair status into a snapshot file, i click [OK]. To cancel this operation, of this operation, you will not Follow the instructions in the message. i be able to re- volumes. Confirm whether the command device W for Business Continuity Manager is defined. There are - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 162
operation, M-VOL status will Follow the instructions in the message. W be changed If this problem persists, please contact HP Technical Support. This operation the Select "Add RCU" command, then W specified LUSE not available for the particular CU storage system specified by the selected from - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 163
VOL or R-VOL is not supported by Check the settings of . If necessary, use the Performance Monitor Export Tool to export operation deletes all command devices for the Business Continuity Manager. Are you sure disk IDs available. Register some quorum disk IDs, then retry W Register some quorum disk - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 164
disk. Create some the operation. external volumes, then retry the operation. An external volume is assigned to two or more quorum disk IDs. An external volume cannot be used for multiple quorum disk IDs. Assign another external maximum, the excess data the disk storage system, then retry the were - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 165
]. To delete the quorum disk ID, click [OK]. HP Technical please contact HP Technical Support. Support. An error occurred during SVP Retry the operation. If this problem E processing. If this problem persists, persists, please contact HP Technical please contact HP Technical Support. Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 166
problem E processing. If this problem persists, persists, please contact HP Technical please contact HP Technical Support. Support. This function is not supported , due to a communication error between the local and the remote storage systems. The path could not be deleted due to a Check the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 167
Level If you are performing a path operation, W retry the operation after the FREEZE status is released. If you are performing a pair operation, check the cable connection of the remote storage system. If the problem persists, please contact HP Technical Support. 6505 8720 6505 8721 6505 8722 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 168
. If the specified values are correct, check the cable connection of the remote storage system. If the problem persists, please contact HP Technical Support. 6505 8736 6505 8737 The specified remote storage system contains journals or data volume pairs for remote copy operations. Delete data - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 169
data volume is being used by XRC Replication. • The secondary data volume is being supported by Continuous the OPENPLATFORM SECTION in the Access Journal or Continuous Access maintenance manual HP E Technical Support. One side of the cache or the shared memory is blocked in the primary storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 170
primary subsystem. Please contact HP Technical Support. E The secondary data supported by OPENPLATFORM SECTION in the Continuous Access Journal or Continuous maintenance manual and LUN settings W the secondary storage system. in the secondary storage system. The specified primary data volume - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 171
occurred on the secondary Check the SSB log, then contact HP E data volume. Technical Support. The specified primary data volume is already reserved by Auto at the secondary W failed because you tried to create volume storage system and check the licensed pairs which exceeded the licensed - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 172
Error Code. Please contact HP Technical Support. E Remote Web Console attempted to Check the status of the port, and retry W change the port type. However, this the operation. attempt was rejected because the same operation was in progress from a host. The primary storage system does not - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 173
Array Management of the remote storage system. To perform the specified operation, purchase a license key that allows you to use a capacity larger than the current capacity. This function cannot be used by the storage partition administrator. Please contact HP Technical Support. E Processing - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 174
The specified volume is blocked. Please contact HP Technical Support. E The cache or the shared memory is in Please contact HP Technical Support. E an abnormal state. The specified . Check the cache capacity of the primary W and secondary storage systems. 174 Message (part code group 6nnn) - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 175
the configuration of the storage systems and the status of lines connecting the storage systems, then check whether the status of the Remote Copy pair is changed. The subsystem is busy. Wait for a while, If the same error occurs despite retrying, W and then retry the operation. please contact HP - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 176
of the following reasons: • The emulation type is not supported. • The combination of emulation types within the journal is incorrect remote subsystems can be registered. Reduce the number of registered remote W storage systems, then retry the operation. The SLPR number of the specified data - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 177
, then specify the correct values. If the specified values are correct, check the cable connection of the remote storage system. If the problem persists, please contact HP Technical Support. 6505 58101 6505 58102 The pair status is incorrect. An internal error occurred. Refresh the window, and - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 178
volume combined in LUSE does not match each other. • If the current microcode version supports the specified data volume capacity. • The specified capacity of the secondary data volume is not supported by the current microcode version. 6505 58264 6505 58265 6505 58266 6505 58269 6505 58270 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 179
deleted, because the volume secondary data volume is registered. is already registered in another journal. An internal error occurred. Please contact HP Technical Support. E No more pairs can be registered Check the number of pairs. W because the number of pairs will exceed the maximum. Part - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 180
operation cannot be performed on the data volume HP Technical Support. E The specified volume is used by another Check if the specified volume is used by W program product. any of the following program products: • Auto LUN • Business Copy/Snapshot • Compatible FlashCopy • Thin Provisioning - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 181
volume. Specify another primary data volume, W and retry the operation. The operation of Add Pair (Paircreate) Please contact HP Technical Support. E or Resume Pair (Pairresync) cannot be performed, because the data are remained in the journal cache for the restore journal. Part code 6505 181 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 182
Pair (Paircreate) Please contact HP Technical Support. E or Resume Pair (Pairresync) cannot be performed, because the data are remained and specify W a journal volume because the specified a non-external volume. volume is an external volume. The specified volume cannot be used as Check the setting - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 183
not support external volumes. Be sure that IO suppression mode of the W specified secondary data volume is enabled on the Universal Volume Mgr window. If the IO suppression mode is disabled, check the microcode version of DKCMAIN of the secondary storage system, and contact HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 184
Asynchronous • Auto LUN • Auto LUN 6505 58451 6505 58456 6505 58457 The disk subsystem is in internal process. If the problem persists despite retrying, W Please retry the operation. please contact HP Technical Support. The Add Pair operation or the Resume Pair operation failed because the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 185
function supports Data Retention VMA. The operation failed because the Confirm the licensed capacity of the W capacity of the secondary storage system Open System Array Management of the has exceeded the licensed capacity of secondary storage system. To perform Open System Array Management - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 186
this problem persists, please contact W window and retry the operation. If this HP Technical Support. problem persists, please contact HP Technical Support. because the license Install Mainframe Array Management in W of the Mainframe Array Management the remote storage system or change the was - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 187
this problem persists, please contact HP Technical Support and request to the operation. format the volume. If this problem persists, please contact HP Technical Support and failed because Check the status of the storage system. W the subsystem was being powered on or Retry the operation after - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 188
The Paircreate operation failed because Check the LUSE volume configuration of W the configuration of the LUSE volume was the primary data HP Technical Support and W install additional shared memory. Journals cannot be added to the extended consistency group (EXCTG), because the number of storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 189
extended Refresh the window, then retry the W consistency group (EXCTG) operation is operation. If this problem persists, please invalid. contact HP Technical Support state of the journal in the W to extended consistency group (EXCTG). storage system where the specified journal belongs to, or - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 190
in the W specified extended consistency group (EXCTG). The specified operation failed because If this problem persists please contact HP W of a temporary path failure. Retry the Technical Support. operation. If this problem persists, please contact HP Technical Support. The specified volume - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 191
from the RAID Manager or Business Continuity Manager. The storage system. storage system was not "restore." The status of the other mirror of the Delta If the problem persists despite retrying, W resync did not change. contact HP Technical Support registered in the extended consistency group ( - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 192
HP Technical Support. No more journals can be allocated to Delete the journal registered in the W the specified command device. extended secondary data volume in the Business because the specified secondary data Copy/Snapshot window, the Business volume was used by one of the following - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 193
HP Technical recovery to the status ready for Delta Support. resync failed. If the same problem persists despite retrying, please contact HP Technical Support W program product and the related program products. See the user's guides for the RCU side of Continuous Access XP or TrueCopy z/ - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 194
program product and the related program products. See the user's guides of Continuous Access Synchronous or Continuous Access Synchronous Z 66588 66589 6505 66590 The processing mode in the spreadsheet Check the contents of the spreadsheet. W declaration statement is invalid. The description of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 195
Recommended Action Severity Level The number of digits of CU (P-VOL) is invalid. Check the contents of the spreadsheet. W The format of CU (P-VOL) is invalid. Check the contents of the spreadsheet. W The value entered as CU (P-VOL) is outside the setting range. Check the contents of the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 196
Action Severity Level The value entered as LDEV (local VOL) Check the contents of the spreadsheet. W is outside the setting range. The number of digits of LDKC (paired Check the contents of the spreadsheet. W VOL) is invalid. The format of LDKC (paired VOL) is invalid. Check the contents of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 197
CopyMode is outside the setting range. Check the contents of the spreadsheet. W The number of digits of Range is invalid. Check the contents of the spreadsheet. W The format of Range is invalid. Check the contents of the spreadsheet. W The value entered as Range is outside Check the contents of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 198
. W set for VolType but Disable was not set for S-VOLWrite. When the pair was operated, Volume Check the contents of the spreadsheet. W was set for Range but Flush was not set for SuspendMode. The operation failed, because the Check if the specified journal is W specified journal was - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 199
extended Provisioning. The secondary subsystem does not Check whether the secondary subsystem W support the LDEV number of the specified supports the LDEV number of the primary data volume. specified primary data volume. The operation failed because the current Check the connected storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 200
Install the Disaster Recovery Extended W function in the secondary storage system. Journals cannot be added to the Confirm the LDKC number of the W extended consistency group(EXCTG), specified extended consistency group. because the current microcode version does not support LDKC numbers other - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 201
primary data volume runs on the 2DC one of the following. configuration in which the Continuous • The volume was not used by Access secondary data volume was a volume and the secondary data volume Thin Provisioning volume whose capacity after the capacity change of secondary was being changed - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 202
number of the external W numbers between the remote command volume that is used as a remote device and the mirror did not match. command device matches the one of the storage system connected to the mirror. The operation failed, because the specified journal was not in the configuration of 3DC - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 203
to "Difference Management." 6505 68888 the specifed consistency commands which were not Check the settings, and retry the W able to be processed were demanded. operation. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If the problem - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 204
. If If the same error occurs despite retrying, E this problem persists, please contact HP please contact HP Technical Support. Technical Support. The system cannot apply the new Click [Refresh], and retry. W configuration. Do you want to refresh? Exchange the channel cable connections - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 205
connections is displayed, and then perform the necessary changes. 6510 9100 you want to apply? To apply settings in Preview to the disk i storage system, click [OK]. Do you want to change the reflected yet. Do you want to change the to View mode, click [OK]. Otherwise, mode? click [Cancel - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 206
ports. Set the port to Initiator before registering W the storage system. The Continuous Access Journal function Obtain a license for Click [Refresh] to update the history file. i If this problem persists, please contact HP Technical Support. This operation is not applied yet. Click [OK], then - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 207
. 6510 56505 6510 56522 6510 56523 6510 59004 6510 6510 59005 59006 6510 59007 There are no secondary subsystems Register secondary storage systems, then W available. Please register secondary retry the operation. subsystems and then retry the operation. There are no consistency groups - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 208
Apply the Preview data to i exceeded the maximum, the excess data the disk storage system, then retry the were discarded. No more Preview data operation. can the setting of the monitoring switch. If necessary, use the Performance Monitor Export Tool to export the monitoring data file. 6510 59031 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 209
HP Technical Support. The journal volume cannot be deleted, Change the mirror status of the journal W because the mirror status of the journal to Stop or Initial, then retry the operation. is Active. No more journal can be added to the Check the number of journals in the W specified extended - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 210
DKC to the extended add the journal of the local DKC to the consistency group (EXCTG). extended consistency group volumes. a LUSE volume. Also, check storage The current version of the microcode system's SVP. No more remote command devices can Check if a remote command device was W be assigned - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 211
volume. Also, check storage system's microcode version. Journals cannot be added to the extended consistency group (EXCTG), problem persists, please contact HP please contact HP Technical Support. Technical Support. The system cannot apply the new Click [Refresh], and retry. W configuration - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 212
channel cable connections is displayed, and then perform the necessary changes. 6610 9100 6610 6610 to i the storage system, click [OK]. Do you want to change the mode? To switch W reflected yet. Do you want to change the to View mode, click [OK]. Otherwise, mode? click [Cancel]. The - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 213
ports. Set the port to Initiator before registering W the storage system. The Continuous Access Journal Z function Obtain a license for [Refresh] to update the history file. i If this problem persists, please contact HP Technical Support. This operation is not applied yet. Click [OK], then - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 214
as the specified volume, then retry the operation. 6610 56505 6610 56522 6610 56523 There are no secondary subsystems Register secondary storage systems, then W available. Please register secondary retry the operation. subsystems and then retry the operation. There are no consistency groups - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 215
Apply the Preview data to i exceeded the maximum, the excess data the disk storage system, then retry the were discarded. No more Preview data operation. can the setting of the monitoring switch. If necessary, use the Performance Monitor Export Tool to export the monitoring data file. 6610 59031 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 216
Level Warning: To delete the journal volume, click [Yes]. W A mainframe volume is included in the Otherwise, click [No]. journal volumes to be deleted. HP recommends that you record the Note that the following points if you have made volume pairs by using this journal LDKC number, the CU - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 217
W DKCMAIN. To use other emulation types, please contact HP Technical Support to update the microcode version of DKCMAIN. The current the specified journals include W an extended consistency group (EXCTG). the journals which belong to an extended The timer type for journals which belong - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 218
DKC to the extended add the journal of the local DKC to the consistency group (EXCTG). extended consistency group be performed using multiplatform volumes. version of the microcode of the storage system the SVP. No more remote command devices can Check if a remote command device was W be assigned - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 219
extended the remote command device problem W in the subsystem. Please wait for a while, persists despite retrying, please contact and then retry the operation. HP Technical Support. Error happened after some change Wait a moment and retry. W occurred. Please refresh the array configuration - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 220
number (CLPR W No.) was detected. No.), then retry the operation. If this problem persists, please contact HP Technical Support. An invalid storage resource number (SLPR No.) was detected. Please contact HP Technical Support. E The maximum number of CLPRs that can Specify the number of CLPRs - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 221
[OK], then go on to the next operation. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. Do you want to cancel? To cancel the operation, click [OK]. i Do you want to apply - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 222
E processing. If this problem persists please HP Technical Support. contact HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. An internal logic error - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 223
status. See the section "Operations permitted E for L1, L2 pairs" in the HP StorageWorks P9000 Business Copy User Guide for the relation between the status of pairs and the commands that can be accepted. The command has been rejected, Vary the S-VOL or the reserved volume W because the specified - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 224
VOL is used as a data volume Journal, the command cannot be of Continuous Access Journal. executed in the current status of Continuous Access Journal pair. See the section "Sharing Business Copy volumes" in the HP StorageWorks P9000 Business Copy User Guide for the relation between the status of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 225
is detected (DKA). Please contact HP Technical Support. E The P-VOL is not implemented. You cannot execute the operation for the W volume which is not implemented. The command has been rejected, because the specified P-VOL is blocked or used as a system disk. • Restore the blocked volume, then - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 226
Specify the volume of the supported W emulation type. The command has been rejected, See the section "Planning number of W because the area of the differential table pairs" in the HP StorageWorks P9000 or pair table to set pairs is insufficient. Business Copy User Guide for the relation between - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 227
. The command has been rejected, Pairs cannot be created with the W because the number of pairs created with specified P-VOL any more. the specified P-VOL has reached the maximum. See the section "Volume pairs (P-VOLs and S-VOLs)" in the HP StorageWorks P9000 Business Copy User Guide for the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 228
specified volume is not an S-VOL. Check the volume status. W The RAID level of the specified S-VOL is Specify the volume number of the W not supported. supported RAID level. The command has been rejected, The requested command cannot be W because the specified S-VOL is used as executed in - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 229
mode specification is invalid. Check the contents, and retry. W The status mode type is invalid. Check the contents, and retry. W The specified CU number is invalid. Please contact HP Technical Support. W The timing of issuing the command is Please contact HP Technical Support. E invalid - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 230
"Resynchronize pairs" in the HP StorageWorks P9000 Business Copy User Guide for the relation between the state of pairs and the Business Copy operations. 7005 8644 7005 8645 7005 8646 7005 8647 7005 8648 7005 8649 7005 8650 7005 7005 8651 8652 7005 8653 The command has been rejected, Check - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 231
occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. This function cannot be used by the storage partition administrator. Please contact HP Technical Support. E An error occurred during SVP - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 232
Recommended Action Severity Level An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. The command has been rejected Select a different volume or release the W because the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 233
external volumes, and also is pairs. used as a Continuous Access Journal pair. The command disk subsystem is in internal process. If the problem persists despite retrying, W Please retry the operation. please contact HP Technical Support. The operation cannot be performed, Release the Snapshot - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 234
MU number is already used. The specified command cannot be W executed with the current pair composition. See the section about the interoperability with other products and functions and the Business Copy described in the HP StorageWorks P9000 Snapshot User Guide for the condition of sharing the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 235
not belong to CU group W 0 are currently not supported. Specify another volume. The command cannot be executed in the W current status of Continuous Access Journal pair. See the section about sharing Business Copy volumes in the Business Copy User Guide for the relationship between the state of the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 236
pair configuration. composed of the Thin Provisioning volume and the volumes other than Thin Provisioning volume. The Quick Restore command has of Snapshot, which is registered in the CTG. Release the pair of Snapshot that is using W the specified S-VOL, then retry the operation. The command has - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 237
configuration. The operation for interoperability with other products and this P-VOL failed due to one of the functions described in the Business Copy following reasons. User Guide 75003 The command was rejected, because the Associate the specified Thin Provisioning W Thin Provisioning volume - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 238
storage system. capacity of the specified reserved volume. Part code 7007 Table 60 Error codes (part code 7007) Part Code 7007 Error Number 6012 7007 7111 Error Message An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. An error occurred - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 239
Support. If this problem persists please contact HP E Technical Support. An internal logic contradiction occurred. Please contact HP Technical Support. i The Emulation Type is invalid. Specify the volume of the supported i emulation type. Some settings could not be applied normally. Refer - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 240
different SLPRs. If you perform this operation, the storage partition administrator will become unable to operate. Please contact HP Technical Support. E Do you want cannot be executed for Pairsplit operation or Snapshot pair from Remote Web Console, if the is included in the specified pairs. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 241
error code is not registered. If this problem persists, please contact E HP Technical Support. Sufficient amount of shared memory is not installed for Mainframe Systems User Guide for the relation between the status of pairs and the commands that can be accepted. The command has been rejected, - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 242
specification was issued to a secondary boot device. The M-VOL Suspend command was Check the contents, and retry. W issued to a secondary boot device. You cannot reserve the volume, because Detach the S-VOL from the host, or delete W a path group is set. the Remote Copy path. Cannot perform - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 243
command cannot be of Continuous Access Journal Z. executed in the current status of Continuous Access Journal Z pair. See the section "Sharing Business Copy Z volumes" in the Business Copy for Mainframe Systems User Guide . Please contact HP Technical Support. E The command was rejected. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 244
a volume that is not used as a W it is used as a command device. command device. The command code is invalid. Please contact HP Technical Support. E The command code sender is invalid. If this problem persists please contact HP E Technical Support. The volume type is invalid. Please contact - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 245
Error Message Recommended Action Severity Level The command has been rejected, See the section " to set pairs is insufficient. Mainframe Systems User Guide for the relation between the number of The RAID level of the specified volume Specify the volume of the supported RAID W is not supported. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 246
Business Copy for Mainframe Systems User Guide for the composition of supported. Check the RAID level, and specify a W volume of the supported RAID level, then retry the operation. The specified S-VOL cannot be paired Check the contents, and retry. W with a backup server volume. The command - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 247
RAID level of the specified T-VOL is Specify a volume of the supported RAID W not supported. level. The command User Guide for the relation between the state of Continuous Access Synchronous Z pair and the Business Copy Z operations. 7105 8615 The command The status mode specification is invalid. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 248
HP Technical Support. W The timing of issuing the command is Please contact HP Technical Support. E invalid. The abnormal status is invalid. Please contact HP Technical Support pairs" in the Business Copy for Mainframe Systems User Guide for the relation between the state of pairs and - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 249
SSID is specified Check the contents, and retry. W for the Delete Pair or Split Pair command. The Swap&Freeze option cannot be Please contact HP Technical Support. W specified, because the mode 80 is on. The command has been rejected, because the specified S-VOL is being used as the T-VOL of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 250
be used by the storage partition administrator. Please contact HP Technical Support. E An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. The command has been rejected Select - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 251
Access Journal Z and Continuous Access Synchronous Z pair, Continuous Access Synchronous Z. and retry the operation. The disk subsystem is in internal process. If the problem persists despite retrying, W Please retry the operation. please contact HP Technical Support. Part code 7105 251 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 252
Access Journal Z. An error occurred on the DKC side. If If this problem persists, please contact E this problem persists, please contact HP HP Technical Support. Technical Support. This function is not supported. Check if the DKCMAIN and SVP E microcode versions are mismatched. An error - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 253
command has been rejected, because the FICON(R) Data Migration source volume is used in the specified pair, and T-VOL is used with the other program products. • Continuous Access Synchronous Z • Continuous Access Journal Z • Compatible Flash Copy(R) V2 • Mainframe Array Management pair configuration. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 254
by External Storage. External Storage volume cannot be used W as a T-VOL. Specify another volume. The command has been rejected, because the S-VOL of the specified pair is a FICON(R) Data Migration Source Volume. The specified operation cannot be W executed in the current pair configuration - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 255
. Please contact HP Technical Support. E Error details not available. Please contact HP Technical Support. E An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. A time-out - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 256
different SLPRs. If you perform this operation, the storage partition administrator will become unable to operate. Please contact HP Technical Support. Do you want select another volume. specified volume. Information was updated by other users. Click [OK], then continue the operation. W The list - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 257
contact E HP Technical Support. The storage system is in the internal Wait, then click [Refresh]. W process, or some other user is changing the configuration. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 258
Action An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. The storage system is in the internal Wait, then click [Refresh]. process, or some other user is changing the configuration. An error occurred while connecting to the subsystem - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 259
then retry the operation. • The system disk is blocked. 8005 68761 8005 68762 An error occurred on the DKC side. This functionality is not available. Encryption License Key is required. If this problem persists, please contact E HP Technical Support. Install the required program product. W 8005 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 260
information setting again. An error occurred during SVP processing. If this problem persists, please contact W HP Technical Support. The specified port does not exist. Or the The configuration information has been W specified port type is not Fibre port. changed already. Check the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 261
already. Check the settings, volume is not a command device. and request the configuration information setting again. An error occurred. If this problem persists, please contact HP Technical Support. The command device setting and the command device security setting are incorrect. You cannot do - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 262
configuration information setting again. An error occurred. If this problem Check the setting(s), then retry the W persists, please contact HP Technical operation. Support change. The volume cannot be configured as a Connect settings, then retry. W command device because the volume does not - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 263
Array Management is required. licence key. The specified volume cannot be assigned Select another volume. W as an LUSE volume or a command another volume. W command device because it is being used as a V-VOL for Snapshot. The specified volume contains Snapshot Select another volume. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 264
Check the setting. W command device, because it is being used as a quorum disk. An error occurred during SVP processing. Use the SVP to check if the DKC is in the E normal status, then retry. If the same problem persists despite retrying, please contact HP Technical Support. An error occurred - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 265
occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The spreadsheet has not been changed Change the configuration at least one W at all. line - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 266
Configuration File Loader is not installed. Install Configuration File Loader. W An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support setting cannot be performed, The Channel Speed - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 267
in W port is an initiator port. advance. The setting cannot be performed, because an invalid PCB mode is set to the specified CHA. The PCB as a command device. A program error occurred under internal If nothing changes despite retrying, W process. please contact HP Technical Support. Part - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 268
during SVP processing. If this problem persists, please contact E HP Technical Support. The SVP is busy. Please wait for a while, If the same problem persists despite W and then retry the operation. retrying, please contact HP Technical Support. A command was double started. Retry the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 269
, please contact E this problem persists, please contact HP HP Technical Support. Technical Support. It is necessary to install Java Web Start. Click [YES] for continuing processing. W Do you want to install it? Click [NO] when you want to stop. Please re-start your management session Click [OK - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 270
, contact HP this problem persists, please contact HP Technical Support. Technical Support. Severity Level E Part code 8222 Table 69 Error codes (part code 8222) Part Code 8222 Error Number 105001 8222 105002 8222 105003 Error Message Recommended Action The form of Storage System Name - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 271
occurred during SVP If the same problem persists despite E processing. If this problem persists, retrying, please contact HP Technical please contact HP Technical Support. Support. The status of the disk subsystem requires Check the status of the storage system E maintenance (for example, the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 272
total of the values registered as the Please contact HP Technical Support. E maximum number of users that can connect to each SLPR exceeds the value CU number, then retry W the operation. If this problem persists, please contact HP Technical Support. An attempt has been made to either register newly - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 273
HP Technical Support. different SLPR. This function is not available. Open System Array Management is required to create CLPR. Install the program product. Severity Level E W 8505 56501 8505 56502 8505 56524 8505 56527 8505 56536 The login information of the partition Please contact the storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 274
changed in the Wait a while, then retry the operation. W disk subsystem. Please wait for a while, and then retry the operation. An error occurred on the DKC, while If this problem persists, please contact E obtaining information about the progress HP Technical Support. of the CLPR process. If this - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 275
contact HP Technical Support. Recommended Action If the same problem persists despite retrying, please contact HP Technical Support. If the same problem persists despite retrying, please contact HP Technical Support. If the same problem persists despite retrying, please contact HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 276
E multiple SLPRs. If you perform this operation, the users having access to these SLPRs will lose the privilege. Do you want to continue this operation? 8510 79000 Notice from Partition Definition : Click [OK]. i Installation of Open System Array Management is required to create more than - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 277
problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support service - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 278
e-mail address. left blank. When the mail notification service is enabled, destination e-mail address is required to problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 279
. An error occurred while compressing a If the same problem persists despite E file. retrying, please contact HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The report(s) has already been deleted. Refresh the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 280
9005 7115 Error Message Recommended Action An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support. The number of requests exceeds the Reduce the number and retry the maximum number - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 281
used by the storage partition administrator. Recommended Action If this problem persists, please contact HP Technical Support. Severity Level E If this problem persists, please contact E HP Technical Support. If this problem persists, please contact E HP Technical Support. Retry the operation - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 282
the same problem persists despite E this problem persists, please contact HP retrying, please contact HP Technical Technical Support. Support There license capacity of this software title. Please install additional license key(s) to expand the license capacity of this software title. The used - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 283
Please contact HP Technical Support. E not match. The configuration could not be changed. Please contact HP Technical Support. E storage partition administrator. Please contact HP Technical Support. E The LDKC Number is incorrect. If this problem persists, please contact E HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 284
during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support. Severity Level E E An error occurred during SVP E processing. If this problem persists, please contact HP Technical Support. Part code 9110 Table - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 285
problem Please contact HP Technical Support. E persists, please contact HP Technical Support. An error occurred during processing. If If this problem persists, please contact E this problem persists, please contact HP HP Technical Support. Technical Support was added by the user? To delete the - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 286
and register LDEV W group because the volume configuration groups and Security groups again. has been problem persists, please contact HP Technical Support. If this problem persists, please contact HP Technical Support. No commands are issued. Issue a command again. The number of issued commands - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 287
logical volume is configured as a Check the logical volume configuration, W command device. then retry the operation. The command was rejected, be used by the storage partition administrator. If the problem persists despite retrying, E please contact HP Technical Support. The version number - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 288
Number 7060 7442 7443 8112 9107 Error Message Recommended Action Severity Level An error occurred during processing. If If this problem persists, please contact E this problem persists, please contact HP HP Technical Support. Technical Support. There is an invalid value in the Volume If this - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 289
problem persists, please contact E HP Technical Support. No commands are issued. Issue a command again. W The number of issued commands exceeds Decrease the number of commands by RAID Manager. This logical volume is configured as a Check the logical volume configuration, W command device. - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 290
HP Technical Support. This logical volume is already used as Check the logical volume configuration, W an S-VOL for Remote Copy or Business then retry the operation. Copy. The command term of the logical W has been changed by RAID Manager. volume, then retry the operation. You cannot change - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 291
path to the logical volume using the RAID Manager or Remote Web Console • No mode is set using the RAID Manager 9605 58438 9605 58442 9605 58448 9605 58450 9605 68002 This logical volume is configured as a Check the logical volume configuration, W command device. then retry the operation. The - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 292
9363 Error Message Recommended Action Severity Level An error occurred during SVP processing. If this problem persists, please contact HP Technical Support. If this problem persists, please contact E HP Technical Support. There is an invalid value in the Data Retention information. If this - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 293
the message. the Class A field. The same IP address, user ID and output Reply to the message. folder are set to the primary FTP been Reply to the message. i completed successfully. Are you sure you want to perform the complete operation of all SIMs related to the FTP transfer of Audit Log? - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 294
because it is for an external volume. The re-entered password problem persists despite retrying, E please contact HP Technical Support. The size of the specified file is too large. Check the specified file. W The encryption key that has been generated does not exist. Check the configuration - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 295
107002 10122 107003 Error Message Recommended Action Severity Level An internal logic error occurred. If the problem persists despite retrying, E please contact HP Technical Support. The processing cannot continue due to Refresh the window, then retry the E an internal logic contradiction - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 296
. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The parameter - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 297
. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. An error occurred during SVP processing. If this problem persists, please contact E HP Technical Support. The capacity - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 298
specific information of Check the environment. E user. Failed to save the specific information of Check the environment. E user. Failed to save the specific information of Check the environment. E user a while. If the problem persists, please contact HP Technical Support. • The version of - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 299
Table 90 Error codes (part code 20020) (continued) Part Error Code Number 20020 107059 20020 107060 20020 107061 20020 107062 20020 107063 20020 107064 20020 107065 20020 107066 20020 107067 20020 107068 20020 107069 20020 107070 20020 107071 20020 107072 20020 107073 20020 107074 20020 107075 - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 300
not exist. Failed to get the user information from Check the environment. E the specified global session ID. The application failed to start, or it was If the problem persists despite retrying, E terminated forcibly. please contact HP Technical Support. Part code 20121 Table 91 Error codes - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 301
20121 107025 20121 107026 The user session was interrupted. An storage list browser), then log it in again. If the problem persists despite retrying, please contact HP Technical Support. Log in again. E If the same problem persists despite E retrying, please contact HP Technical Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 302
Message Recommended Action Severity Level The task cannot be changed to the specified status. If the same problem persists despite W retrying, please contact HP Technical Support. The number of registered tasks has reached the maximum. Wait for a while, then retry the W operation. If - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 303
An unexpected error occurred. If the same problem persists despite E retrying, please contact HP Technical Support. An error occurred. Confirm the details be destroyed. Do you want to continue this operation? The configuration does not become Turn the security switch on. W effective until - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 304
authority again with the user who has the of Remote Web Console. reference authority of Remote Web Console. A time-out error occurred. Refresh the window, then retry the E operation. If the same problem persists despite retrying, please contact HP Technical Support. The processing is - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 305
contact HP Technical Support. If the problem persists despite retrying, E please contact HP Technical Support. If the problem persists despite retrying, E please contact HP Technical Support. Do the following. W • This operation cannot be done while another user is changing the configuration - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 306
. Retry the Support. operation. The operation failed, because the Wait for a while, then retry the W configuration information was being operation. changed. The operation failed because the storage Wait, then retry the refreshing operation. W system performed refreshing internally. The - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 307
in the disk storage system. The configuration may be inconsistent. Recommended Action Severity Level If the problem persists despite retrying, E please contact HP Technical Support. If the problem persists despite retrying, E please contact HP Technical Support. If the problem persists despite - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 308
retry the operation. If the same problem persists despite retrying, please contact HP Technical Support. Severity Level E Part code support configuration of pools, W added to the specified pool. then retry the operation. A volume of different RAID level cannot Check the support configuration - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 309
be continue due to an internal logic contradiction. Refresh the window, then retry the operation. If the same problem persists despite retrying, please contact HP Technical Support. 20422 107002 The process cannot be continue due to an internal logic contradiction. Refresh the window, then retry - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 310
another, or click [Refresh], then retry. If the same problem persists despite retrying, please contact HP Technical Support. Failed to create a report. If the problem persists despite retrying, W please contact HP Technical Support. A report cannot be created any more Delete unnecessary reports - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 311
• HP StorageWorks P9000 Performance for Open and Mainframe Systems User Guide • HP StorageWorks P9000 Remote Web Console User Guide You can find these documents on the Manuals page of the HP Business Support Center website: http://www.hp.com/support/manuals In the Storage section, click Disk Storage - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 312
bytes P9000 disk arrays use the following values to calculate logical storage capacity hp.com Bold text Element Cross-reference Commands, their arguments, and argument values Monospace, italic text • Code variables • Command variables Monospace, bold text Emphasized monospace text 312 Support - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 313
or data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides helpful hints and shortcuts. HP product documentation survey Are you the person who installs, maintains, or uses this HP storage product? If so, we would like to - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 314
, HP StorageWorks Business Copy, or HP StorageWorks P9000 Business Continuity Manager control operations, which are then executed by the array. Consistency group. Control Unit. The Control Unit is used to organize the storage space attached to the DKC, you can group similarly configured logical - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 315
your HP representative for the details about which RAID levels are supported by your specific P9000 or XP disk array. The CLI configuration and replication tool for the P9000 or XP disk array that can be used by system administrators to enter RAID Manager commands from open-system hosts to perform - HP StorageWorks P9000 | HP StorageWorks P9000 Remote Web Console Messages (AV400 - Page 316
, 311 S storage capacity values conventions, 312 Subscriber's Choice, HP, 311 symbols in text, 313 T technical support HP, 311 service locator website, 311 text symbols, 313 typographic conventions, 312 W websites HP , 311 HP Subscriber's Choice for Business, 311 product manuals, 311 316
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
81
-
82
-
83
-
84
-
85
-
86
-
87
-
88
-
89
-
90
-
91
-
92
-
93
-
94
-
95
-
96
-
97
-
98
-
99
-
100
-
101
-
102
-
103
-
104
-
105
-
106
-
107
-
108
-
109
-
110
-
111
-
112
-
113
-
114
-
115
-
116
-
117
-
118
-
119
-
120
-
121
-
122
-
123
-
124
-
125
-
126
-
127
-
128
-
129
-
130
-
131
-
132
-
133
-
134
-
135
-
136
-
137
-
138
-
139
-
140
-
141
-
142
-
143
-
144
-
145
-
146
-
147
-
148
-
149
-
150
-
151
-
152
-
153
-
154
-
155
-
156
-
157
-
158
-
159
-
160
-
161
-
162
-
163
-
164
-
165
-
166
-
167
-
168
-
169
-
170
-
171
-
172
-
173
-
174
-
175
-
176
-
177
-
178
-
179
-
180
-
181
-
182
-
183
-
184
-
185
-
186
-
187
-
188
-
189
-
190
-
191
-
192
-
193
-
194
-
195
-
196
-
197
-
198
-
199
-
200
-
201
-
202
-
203
-
204
-
205
-
206
-
207
-
208
-
209
-
210
-
211
-
212
-
213
-
214
-
215
-
216
-
217
-
218
-
219
-
220
-
221
-
222
-
223
-
224
-
225
-
226
-
227
-
228
-
229
-
230
-
231
-
232
-
233
-
234
-
235
-
236
-
237
-
238
-
239
-
240
-
241
-
242
-
243
-
244
-
245
-
246
-
247
-
248
-
249
-
250
-
251
-
252
-
253
-
254
-
255
-
256
-
257
-
258
-
259
-
260
-
261
-
262
-
263
-
264
-
265
-
266
-
267
-
268
-
269
-
270
-
271
-
272
-
273
-
274
-
275
-
276
-
277
-
278
-
279
-
280
-
281
-
282
-
283
-
284
-
285
-
286
-
287
-
288
-
289
-
290
-
291
-
292
-
293
-
294
-
295
-
296
-
297
-
298
-
299
-
300
-
301
-
302
-
303
-
304
-
305
-
306
-
307
-
308
-
309
-
310
-
311
-
312
-
313
-
314
-
315
-
316
 |
 |
HP StorageWorks
P9000 Remote Web Console Messages
Abstract
This document lists the error codes and error messages for HP StorageWorks P9000 Remote Web Console for P9000 disk
arrays, and provides recommended action for the error conditions.
HP Part Number: AV400-96351
Published: January 2011
Edition: Third