HP StorageWorks b2000 NAS b2000 - Quick Start Guide

HP StorageWorks b2000 - NAS Manual

Get HP StorageWorks b2000 - NAS PDF manuals and user guides View all HP StorageWorks b2000 manuals
Add to My Manuals
Save this manual to your list of manuals

HP StorageWorks b2000 manual content summary:

  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 1
    StorageWorks by Compaq NAS B2000 Quick Start Guide Part Number 292283-001 (First Edition) May 2002 Product Version: Version 1.0 This quick start guide provides information about how to deploy the StorageWorks™ NAS B2000 by Compaq.
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 2
    Information Technologies Group, L.P. Compaq, the Compaq logo, and StorageWorks are trademarks of Compaq Information Technologies Group, L.P. in the construed as constituting an additional warranty. StorageWorks by Compaq NAS B2000 Quick Start Guide (First Edition) May 2002 Part Number 292283-001
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 3
    Compaq Technical Support ix Compaq Website ...ix Compaq Authorized Reseller x Chapter 1 Product Overview Configuration Options ...1-1 Managing the NAS B2000 1-2 Dependencies and Requirements 1-3 Storage Requirements 1-3 IP Networking and Setup Requirements 1-3 Deploying the NAS B2000 on the
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 4
    Configuration 2-1 Configuration Information 2-1 Chapter 3 Configuration Setup Configuration Method...3-1 WebUI Configuration...3-2 Auto Discovery Method (Via RapidLaunch 3-2 Direct Access Method (Using Hostname 3-9 Completing the System Configuration 3-11 Index iv NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 5
    About This Guide This guide provides step-by-step instructions for deployment of the StorageWorks NAS B2000 by Compaq. Intended Audience This guide assumes that the reader has knowledge of Microsoft administrative procedures and file-sharing protocols. Compaq recommends that the reader obtain
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 6
    hazards. The area contains no user or field serviceable parts. Do not open for any reason. WARNING: . These symbols, on power supplies or systems, indicate that the equipment is supplied by multiple sources of power. WARNING: To reduce manual material handling. and vi NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 7
    could result in damage to equipment or loss of information. IMPORTANT: Text set off in this manner presents clarifying information or specific instructions. NOTE: Text set off in this manner presents commentary, sidelights, or interesting points of information. NAS B2000 Quick Start Guide vii
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 8
    covered in this guide, refer to the following documentation: • StorageWorks by Compaq NAS B2000 Administration Guide • StorageWorks by Compaq NAS B2000 Quick Reference and Rack Installation Guide • StorageWorks by Compaq NAS B2000 Release Notes Getting Help If you have a problem and have exhausted
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 9
    Guide Compaq Technical Support In North America, call the Compaq Technical Support Phone Center at 1-800-OK-COMPAQ. This service before you call Compaq: • Technical support registration number (if applicable) • Third-party hardware or software • NAS operating system revision level Compaq Website
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 10
    About This Guide Compaq Authorized Reseller For the name of your nearest Compaq authorized reseller: • In the United States, call 1-800-345-1518. • In Canada, call 1-800-263-5868. • Elsewhere, see the Compaq website for locations and telephone numbers. x NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 11
    1 Product Overview This chapter describes the configuration options and setup and configuration dependencies and requirements for the StorageWorks NAS B2000 by Compaq. Configuration Options The NAS B2000 offers both internal and external storage options. It ships with an integrated SCSI-3 Smart
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 12
    Overview Managing the NAS B2000 The NAS B2000 is configured at the factory with default system settings and with the NAS operating system installed. Storage, however, is not pre-configured, allowing the NAS this chapter for more information. The NAS administrator uses the Compaq Array Configuration
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 13
    Product Overview Dependencies and Requirements Specific conditions must be met in order for the NAS B2000 to operate. Storage StorageWorks by Compaq NAS B2000 Administration Guide. IP Networking and Setup Requirements The following are IP networking and setup requirements needed for a NAS B2000
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 14
    Overview Deploying the NAS B2000 NAS B2000 supports the use of NIC teaming. NIC teaming provides failover and load balancing of network ports of the NAS B2000. setup is complete, see the administration guide. 1 2 34 5 3 2 14 13 12 11 10 9 8 7 6 Figure 1-2: Rear panel connectors 1-4 NAS B2000
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 15
    ) Power connectors Keyboard connector (PS/2) (purple) RJ-45 connector for NIC 1 (Eth0) USB connectors (2) (black) Video connector (blue) (not supported) Remote Insight Lights-Out Edition board) Power for external adapter (Remote Insight Lights-Out Edition board) NAS B2000 Quick Start Guide 1-5
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 16
    type of setup, it is important to read all of the supplied documentation before starting. Relevant documents include: • StorageWorks by Compaq NAS B2000 Administration Guide • StorageWorks by Compaq NAS B2000 Quick Reference and Rack Installation Guide • StorageWorks by Compaq NAS B2000 Release
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 17
    a StorageWorks NAS device. Failure to read this section and the appropriate sections on storage management in the administration guide may lead to data loss or file corruption. Storage Management Elements Figure 1-3 provides an illustration of the various storage components of the NAS B2000
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 18
    Product Overview Physical Drives Storage Elements RAID Arrays LUNS LUN 1 LUN 2 LUN 3 LUN 4 3 snap vd3 F: P: F:\ Eng File System Elements Shares and Subfolders B2000\Acct B2000\Mktg B2000\Eng Figure 1-3: Storage management process File Sharing Elements 1-8 NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 19
    Overview Storage Elements The lowest level of storage management on the NAS B2000 occurs at the physical drive level. Physical drives are grouped into RAID arrays for fault tolerance and better performance. The end user should configure RAID arrays using ACU. Refer to the administration guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 20
    Product Overview • All the units that make up a pool should have the same letter assignments or mount point assignments. Refer to the administration guide for more details on file system elements. File-Sharing Elements The NAS B2000 supports several file-sharing protocols, including CIFS, NFS, FTP,
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 21
    here and in the next section only provide basic setup for the network components of the NAS B2000. IMPORTANT: If you need assistance with rack installation or hardware connections, refer to the quick reference and rack installation guide included in the shipping carton. Collect Information for
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 22
    procedures in the administration guide. Part B: To be completed for non-DHCP configurations only DNS Servers IP Address 1 2 3 NAS NIC Port* IP Address Subnet Mask Gateway Address Eth 0 Eth 1 Remote Insight Lights-Out Edition board Eth * The default NAS B2000 has two Ethernet ports
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 23
    Begin Table 2-1: Configuration Information continued Part A: To be completed for DHCP and non-DHCP configurations Part C: SNMP Information (optional) Trap Destination (IP Address) Manager Client: Management Traps Community String: System Management Community String: NAS B2000 Quick Start Guide 2-3
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 24
    Setup This chapter provides information about configuring the StorageWorks NAS B2000 using the online method. Before completing the tasks in this chapter, verify that the NAS B2000 NAS B2000 is by using the WebUI configuration application that comes with the NAS B2000. NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 25
    Configuration Setup WebUI Configuration The NAS B2000 includes a WebUI that is NAS B2000 • RapidLaunch CD NOTE: The NAS B2000 is designed to be deployed without a monitor, keyboard, and mouse. These ports are available and supported by the NAS device, if used. 3-2 NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 26
    and power it on. It will be several minutes before the NAS device is accessible on the network. 7. Return to the Windows-based PC. Select StorageWorks NAS from the Show drop down list to have RapidLaunch list all NAS devices on the network, as shown in Figure 3-2. NAS B2000 Quick Start Guide 3-3
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 27
    Configuration Setup 1 2 3 Figure 3-1: Ethernet connectors Table 3-1: Ethernet Network Connectors Item Description Remote Insight 0 (Eth 0) used for data Note: Connect a loopback cable to any of the NAS B2000 Ethernet ports that are not configured for use. 3-4 NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 28
    of the screen. It may take several minutes for the NAS device to be found on the network. NOTE: The RapidLaunch utility will refresh periodically looking for new devices on the network. You may refresh the device list manually by selecting the Refresh button. NAS B2000 Quick Start Guide 3-5
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 29
    Configuration Setup Figure 3-3: RapidLaunch device discovery screen 9. Select the StorageWorks NAS B2000 device from the device list. This launches the WebUI configuration application (Rapid Startup) on the target StorageWorks NAS device, as shown in Figure 3-4. 3-6 NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 30
    Configuration Setup Figure 3-4: Rapid Startup wizard screen 10. Using the information from Figure 3-5. 11. Click the Finish icon to exit Rapid Startup. Close the browser window. The NAS B2000 will now reboot to set the configuration information. 12. Exit the RapidLaunch utility and remove the
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 31
    Configuration Setup Figure 3-5: Rapid Startup configuration review screen 3-8 NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 32
    5.5 (or later) on the same segment as the NAS B2000 • DHCP-serviced network • Serial number of the NAS B2000 NOTE: The NAS B2000 is designed to be deployed without a monitor, keyboard, and mouse. These ports are available and supported by the NAS device, if used. NAS B2000 Quick Start Guide 3-9
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 33
    of the network ports on the NAS B2000. 2. Go to the NAS device and power it on. It will be several minutes before the NAS device is accessible on the network. target StorageWorks NAS device as shown in Figure 3-4. Example: http://D4059ABC3433-:3201 NOTE: The NAS device will respond when the NAS
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 34
    Configuration Setup Completing the System Configuration After the configuration process, there are additional tasks required in order to begin sharing files on the network. All procedures for the configuration tasks may be found in the NAS B2000 administration guide. These include: • Changing the
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 35
    setup 3-1 configuration tasks complete the system configuration 3-11 preinitialization 2-1 connectors keyboard 1-5 mouse 1-5 NICs 1-5 power 1-5 Remote Insight Lights-Out Edition board Eth port 1-5 RJ-45 1-5 serial 1-5 USB 1-5 VHDCI SCSI 1-5 video 1-5 D deployment StorageWorks NAS B2000
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 36
    vi serial connector 1-5 serial number location, illustrated 3-9 setup and configuration, NAS B2000 1-6 setup, related documents 1-6 slot locations PCI slot 1 1-5 storage management overview 1-7 storage management process, illustrated 1-8 StorageWorks NAS B2000 Index-2 NAS B2000 Quick Start Guide
  • HP StorageWorks b2000 | NAS b2000 - Quick Start Guide - Page 37
    IP networking and setup requirements 1-3 setup and configuration overview 1-6 symbols in text vii on equipment v T table, Ethernet Network Connectors 3-4 technical support ix telephone weight symbol vi warning vi www.compaq.com ix www.compaq.com/storage ix NAS B2000 Quick Start Guide Index-3
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
StorageWorks by Compaq
NAS B2000
Quick Start Guide
Part Number 292283-001
(First Edition) May 2002
Product Version: Version 1.0
This quick start guide provides information about how to deploy the
StorageWorks
™ NAS B2000 by Compaq.