HP StoreOnce 4210 HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902,
HP StoreOnce 4210 Manual
 |
View all HP StoreOnce 4210 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StoreOnce 4210 manual content summary:
- HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 1
Installation Instructions Abstract This document explains how to install the HP StoreOnce 4500/4700 (24TB) Capacity Upgrade Kits, apply the new licenses, and add the new storage to the existing system. It is intended for system administrators familiar with HP StoreOnce 4700 and 4500 Backup systems - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 2
this product, see the warranty information website: http://www.hp.com/go/storagewarranty Printed in Revision History Revision 1 June 2013 This is the first edition, issued with the launch of the HP StoreOnce 4500 and 4700 Backup system. Revision 2 November 2013 This is the second edition - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 3
Kit...7 Connecting the Capacity Upgrade Kit 7 HP StoreOnce 4500 Backup system 7 HP StoreOnce 4700 Backup system 8 3 Applying the License and Completing the RAID Expansion 11 Applying the License...11 Completing the RAID Expansion 12 Troubleshooting...15 Discover storage fails...15 Add storage - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 4
during the process. With the HP StoreOnce 4500 Backup system expansion can take up to two hours. For the HP StoreOnce 4700 Backup system it can take up to two hours per expansion enclosure, but it is usually a lot quicker than this. Make sure that host users are aware of the expansion process - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 5
Front and rear views of the Capacity Upgrade Figure 1 Front view of the Upgrade Kit 1. Rack-mounting thumbscrews 2. Disk drive (in bay 4) Figure 2 Rear view of the Upgrade Kit 3. UID push button and LED 4. Enclosure status LEDs 1. I/O module A 2. I/O module B 3. P1 connector (connects to RAID - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 6
HP StoreOnce Backup system (or previously installed Upgrade Kits on the HP StoreOnce 4700 Backup system). When adding multiple Upgrade Kits to an HP StoreOnce Backup system, it is recommended to distribute them evenly above and below the head unit. The HP 2U Rack Rail Kit installation instructions - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 7
the device chassis to secure the rear of the chassis to the rails. Connecting the Capacity Upgrade Kit HP StoreOnce 4500 Backup system The HP StoreOnce 4500 Backup system contains 12 disks. If more storage is required after installation, a single Capacity Upgrade Kit may be connected. 1. Connect - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 8
Upgrade Kit: IMPORTANT: The first Capacity Upgrade is normally configured in the factory and the storage will already have been provisioned on SAS port on the RAID controller in slot 1 on the rear of the HP StoreOnce Backup system. 2. Connect the mini-SAS connector on the other end of the cable to - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 9
how three further Upgrade Kits and how seven further Upgrade Kits may be cabled. Figure 5 Adding three further Upgrade Kits to the HP 4700 Backup system 1. Power connectors 2. Square HD SAS port on RAID controller in slot 1 3. Square HD SAS port on RAID controller in slot 4 4. IN connector - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 10
Figure 6 Adding seven further Upgrade Kits to the HP 4700 Backup system 1. Power connectors 2. Square HD SAS port on RAID controller in slot 1 3. Square HD SAS port on RAID controller in slot 4 4. IN connector (on I/O-A mini-SAS - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 11
on the internet) using any configured IP address for the appliance and provide an Administrator user name: ssh @ At the next prompt, enter the Administrator's password. IMPORTANT: When connecting multiple upgrade kits to an HP StoreOnce 4700 Backup system, you must add all - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 12
email or a temporary file, cut and paste the string exactly as you obtained it from the HP Licensing website. Entering the LTU manually is not advised. NOTE: The key is specific to the HP StoreOnce Backup system to which it applies. It cannot be transferred. 5. To ensure that the license has been - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 13
and Volumes. 3. Scan for the newly attached storage and create a new Logical Unit (LUN) on this storage using the StoreOnce CLI command:. hardware discover storage 4. Monitor the status of the LUN creation process using the StoreOnce CLI command: system show status. Completing the RAID Expansion 13 - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 14
# system show status Status -----Formatted 15,070.76GB, Discovered 20,932.81GB to be added Service Sets Status Notes Set 1 Running 5. After 5 minutes the StoreOnce GUI refreshes and shows the new Pool and Volume being parity initialized. 6. If you look at the Hardware Problem Report - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 15
is an example; the values shown may not match your appliance specific values. # system show status Status -----Formatted 15,070.76GB Service Sets Status Notes Set 1 Running Troubleshooting Discover storage fails The hardware discover storage command will fail if: • A previous discover - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 16
• There are any "foreign" LUNs already present on the attached storage. • There are any failed or predictive fail disks in either the existing or newly added storage. • The storage is connected to an incorrect RAID controller or is daisy-chained from the wrong expansion enclosure. Add storage fails - HP StoreOnce 4210 | HP StoreOnce 4500/4700 Capacity Upgrade Guide (BB881-90902, - Page 17
4 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback ([email protected]). Include the document title and part number, version number, or the URL when
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
 |
 |
HP StoreOnce 4500/4700 (24TB) Capacity
Upgrade Kit
Installation Instructions
Abstract
This document explains how to install the HP StoreOnce 4500/4700 (24TB) Capacity Upgrade Kits, apply the new licenses,
and add the new storage to the existing system. It is intended for system administrators familiar with HP StoreOnce 4700 and
4500 Backup systems.
*BB881
–
90902*
HP Part Number: BB881-90902
Published: November 2013
Edition: 2