HP StoreOnce D2D2502i HP StoreOnce 2600, 4200 and 4400 Backup system Capacity
HP StoreOnce D2D2502i Manual
View all HP StoreOnce D2D2502i manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StoreOnce D2D2502i manual content summary:
- HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 1
Upgrade Kit Installation Instructions Abstract This document explains how to install the HP StoreOnce 4210, 4220/4420 and 4430 Upgrade Kits, apply the new licenses, and add the new storage to the existing system. It is intended for system administrators familiar with the HP StoreOnce Backup systems - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 2
to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 3
Views of the Upgrade Kit 5 2 Installing and Connecting the Upgrade Kit 6 Installing the Rails...6 Installing the Upgrade Kit...6 Connecting the Upgrade Kit to the HP StoreOnce Backup System 7 HP StoreOnce 4220/4210 Backup Systems 7 HP StoreOnce 4430/4420 Backup Systems 8 3 Applying the License - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 4
as replication and tape backup, may be affected by decreased performance. Overview of the Upgrade Process 1. Install the rails for the Upgrade Kit, which should be located directly below or above the HP StoreOnce Backup system; see "Installing the Rails" (page 6). 2. Install the Upgrade Kit; see - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 5
License" (page 10). If you are installing several upgrade kits with an HP 4430 or 4420 Backup system, be sure to obtain all LTUs before step 6. 6. Using the HP StoreOnce CLI, as described in "Applying the License and Completing the RAID Expansion" (page 10): • Add and load the licenses • Prepare for - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 6
the Upgrade Kit Installing the Rails The Upgrade Kit should be installed directly below or above the HP StoreOnce Backup system. The HP 2U Rack Rail Kit installation instructions (shipped with the rail kit) details the process of racking a disk enclosure. Sections include: • Installation guidelines - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 7
that must engage the device chassis to secure the rear of the chassis to the rails. Connecting the Upgrade Kit to the HP StoreOnce Backup System HP StoreOnce 4220/4210 Backup Systems 1. To ensure correct keying, first connect the supplied cable to the P1 connector on the top I/O module (I/O-A) on - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 8
of each cable to the connector on the RAID card. HP StoreOnce 4430 Backup system WARNING! Daisy-chaining Upgrade Kits is not supported. Each Upgrade Kit must be directly connected to one of the RAID cards on the HP StoreOnce Backup system. Each kit is supplied with two cables; the longer cable is - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 9
Cabling the Upgrade Kit to the HP StoreOnce 4420 Backup system 1. Power Upgrade Kits to the main power supply. 4. Power on the Upgrade Kits. You may need to hold down the power on button on each installed shelf for a few seconds. Connecting the Upgrade Kit to the HP StoreOnce Backup System - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 10
an Administrator user name: ssh @ At the next prompt, enter the Administrator's password. IMPORTANT: When connecting multiple upgrade kits to an HP StoreOnce 4430/4420 Backup system, you must add all licenses before expanding the capacity of the HP StoreOnce Backup system. The - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 11
it from the HP Licensing website. Entering the LTU manually is not advised. 4. The key is specific to the HP StoreOnce Backup system to which it applies. It cannot be transferred. Completing the RAID Expansion NOTE: HP 4430 and 4420 Backup systems only: All Upgrade Kits that have been licensed - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 12
following command: hardware show storage status (or its alias, system show status) This command will return either of the following enclosures, disks, and raidsets. This is available via the GUI and from a CLI command. The tree is updated every five minutes, so changes to configuration such as - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 13
show problems command to list any enclosures with unconfigured storage. You can also use the hardware show storage status command for a textural view of the storage configured. See the HP StoreOnce Backup System CLI Reference Guide for more information on using these CLI commands. Troubleshooting - HP StoreOnce D2D2502i | HP StoreOnce 2600, 4200 and 4400 Backup system Capacity - Page 14
The hardware add storage command will fail if: • There is an outstanding prepare or add command in progress. • Any of the error conditions described above for the hardware prepare storage command have not been rectified. 14 Applying the License and Completing the RAID Expansion
HP StoreOnce 4210, 4220/4420 and
4430 Upgrade Kit
Installation Instructions
Abstract
This document explains how to install the HP StoreOnce 4210, 4220/4420 and 4430 Upgrade Kits, apply the new licenses,
and add the new storage to the existing system. It is intended for system administrators familiar with the HP StoreOnce Backup
systems.
*BB864-90901*
HP Part Number: BB864-90901
Published: October 2012
Edition: 1