HP StoreOnce D2D4112 HP StoreOnce Conversion from 2.x.x software to 3.4.x (or
HP StoreOnce D2D4112 Manual
View all HP StoreOnce D2D4112 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP StoreOnce D2D4112 manual content summary:
- HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 1
. The conversion process is described in this user guide. Please note that earlier versions of StoreOnce 3.x.x software are not appropriate for this conversion. are not supported for conversion: • HP StoreOnce D2D4106fc Backup system: EH998A • HP StoreOnce D2D4112 Backup system: EH993B HP Part Number - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP release of the software. Troubleshooting information added and supported products amended. Revision 3 - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 3
into the appliance StoreOnce CLI 20 Configure network settings...21 Apply licenses for capacity expansion 21 Configure appliance storage 21 Configure other appliance settings and create backup targets 23 6 Troubleshooting 24 7 Support and other resources 26 Contacting HP...26 New and changed - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 4
8 Documentation feedback 29 A HP StoreOnce 2.x.x to 3.x.x Software Conversion Checklist 30 Conversion steps...30 Settings to be restored during or after conversion 31 4 Contents - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 5
Backup system for supporting documentation.) EJ002B and EJ002C - HP StoreOnce D2D2504i Backup HP StoreOnce 2620 Backup system System EH996A and EH996B - HP StoreOnce D2D4106i Backup HP StoreOnce 4210 iSCSI Backup system System EH998B - HP StoreOnce D2D4106fc Backup System HP StoreOnce 4210 FC - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 6
creation of Catalyst stores for low bandwidth backup and application controlled copy. This allows single node appliances to work with the HP StoreOnce B6200 product which also supports Catalyst stores. Catalyst functionality requires a license for the backup application that you wish to use and also - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 7
Catalyst license BB860AAE HP StoreOnce Catalyst 4200 O.S.T. E-LTU BB861AAE HP StoreOnce Catalyst 4200 DP E-LTU BB862AAE HP StoreOnce Catalyst 4400 O.S.T. E-LTU BB863AAE HP StoreOnce Catalyst 4400 DP. E-LTU NAS and VTL backup targets 3.x.x StoreOnce software continues to support NAS (CIFS - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 8
CLI interface only • IPv6 support is not currently available • A single failover and port aggregation port bonding mode is provided rather than the two discrete modes provided in previous software GUI differences The StoreOnce GUI with 3.4.x (or later) software adopts a cross-HP Storage design and - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 9
HP StoreOnce 2610 iSCSI Backup HP StoreOnce 2620 iSCSI Backup HP StoreOnce 4210 iSCSI Backup HP StoreOnce 4210 FC Backup HP StoreOnce 4220 Backup HP StoreOnce 4420 Backup HP StoreOnce . However if you need to contact the HP support organization you will need to inform them that you have converted - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 10
manuals for your StoreOnce appliance for use after converting to 3.x.x software, these can be downloaded by visiting: http://www.hp.com/support/manuals cables are incorrectly cabled and must be corrected before conversion. See Troubleshooting (page 24) for more details. • Your data replication to - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 11
the best way to migrate data back onto the appliance after conversion completes. If you are not currently using replication but have other HP StoreOnce appliances available, these could provide you with a way to retain your data over the conversion process. Some important points to note are: 1. Make - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 12
date firmware. Go to www.hp.com/go/support/downloads and type the name of your existing HP StoreOnce D2D Backup System product into ://www.hp.com/go/foundation. The upgrade process uses the HPSUM utility. Please read the release notes for the firmware upgrade and follow the instructions carefully. - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 13
2.x.x software are not supported for conversion: • HP StoreOnce D2D4106fc Backup system: EH998A • HP StoreOnce D2D4112 Backup system: be removed completely and placed on a flat surface. See the Maintenance and Service Guide for your product for more details. 5. Remove the lid from the appliance, - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 14
Figure 1 HP StoreOnce D2D4312/4324 Backup System location of flash module Figure 2 HP StoreOnce D2D4106/4112 Backup System location of flash module Figure 3 HP StoreOnce D2D2502/2504 Backup System location of flash module 14 Hardware modification - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 15
the stick. (It is not recommended that this USB stick is used for the 3.x.x install image.) NOTE: The memory module for the HP StoreOnce D2D4112/4106 and the HP StoreOnce D2D2502/2504 has a cable. It should not be necessary to remove this. If you do so, first unscrew the bracket (2) holding the - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 16
Figure 6 HP StoreOnce D2D2502/2504 Backup System location of 1GbE network ports 1 LAN port 1 connector (1GbE), connect for easy 2 LAN port 2 connector (1GbE) install 16 Hardware modification - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 17
30). IMPORTANT: The following older products running 2.x.x software are not supported for conversion: • HP StoreOnce D2D4106fc Backup system: EH998A • HP StoreOnce D2D4112 Backup system: EH993B Download Quick Restore ISO Image The StoreOnce Quick Restore ISO Image is used to install the 3.4.x (or - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 18
NOTE: The process takes several minutes to complete the creation. During this process the HP USB Key for Windows tool may report (not responding) and the file copy this is done using the Smart Array boot. 1. Power on the StoreOnce Backup system and wait for the initial Power On self tests to - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 19
of logical drives deleting them all. 6. Exit the Option ROM configuration for this controller. 7. Wait for the next controller (depending on the StoreOnce product model there will be between 1 and 4 Smart Array controllers) to be discovered and repeat the Logical Drive deletion process. 8. With all - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 20
first boot appliance configuration When the system first boots into the 3.4.x (or later) StoreOnce software it will run through a set of first boot setup tasks. This is login prompt that shows the default appliance name which is HP. At this point the appliance installation is - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 21
StoreOnce CLI or GUI. After conversion the appliance 1GbE network will be enabled on Port 1 and it will be configured in DHCP mode. If the network to which Port 1 of the appliance is attached supports wizard. See the HP StoreOnce Backup system Installation and Configuration guide for more details on - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 22
. The process can take a long time to complete and the new capacity will not be available until it is finished. HP StoreOnce 2610/2620 Backup system HP StoreOnce 4210/4220 and 4420/4430 Backup system Approximately 30 minutes Head only = approximately one hour nl Add approximately 20 minutes per - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 23
is now converted to 3.4.x (or later) software and ready to use, refer to the HP StoreOnce Backup system User Guide and the HP StoreOnce Backup system Installation and Configuration guide for more information on completing configuration, for example: applying licenses for Replication and Catalyst - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 24
6 Troubleshooting Problem The system boots from the QR USB flash drive, but fails cabling against the correct configuration below and re-configure if required. Table 4 Cabling to HP SAS expander card (HP StoreOnce 4430/4420 Backup system) Connect 1 493228-006 mini-SAS cable 2 493228-006 mini- - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 25
Figure 7 Cabling showing the SAS expander card Figure 8 Cabling showing the backplanes 25 - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 26
Query on your product name and then select the Product Manuals link. Websites • HP StoreOnce website: http://www.hp.com/go/storeonce • HP Systems Insight Manager website: http://www.hp.com/go/hpsim • HP Technical Support website: http://www.hp.com/support • Net-SNMP website: http://www.net-snmp.net - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 27
data. IMPORTANT: Provides clarifying information or specific instructions. NOTE: Provides additional information. TIP: Provides . Customer self repair HP customer self repair (CSR) programs allow you to repair your StorageWorks product. If a CSR part needs replacing, HP ships the part directly - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 28
software provides comprehensive remote monitoring and proactive service support for nearly all HP servers, storage, network, and SAN environments, plus selected non-HP servers that have a support obligation with HP. It is integrated with HP Systems Insight Manager. A dedicated server is recommended - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 29
8 Documentation feedback HP is committed to providing documentation that meets your needs. To help us improve the documentation, send any errors, suggestions, or comments to Documentation Feedback ([email protected]). Include the document title and part number, version number, or the URL when - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 30
of the new features convert their products IMPORTANT: The following older products running 2.x.x software are not supported for conversion: • HP StoreOnce D2D4106fc Backup system: EH998A • HP StoreOnce D2D4112 Backup system: EH993B Conversion steps Put a tick in the right-hand column when you have - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 31
Settings to be restored during or after conversion Table 7 Configuration settings General network settings DNS Addresses Default Gateway Address Network settings Subnet 1 DHCP or Static Addressing IP Address Netmask Gateway Address Domain Name DHCP or Static Addressing IP Address Netmask Gateway - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 32
1 Replication Source Appliance 2 Replication Source Appliance 3 Replication Source Appliance 4 Replication Source Appliance 5 Date and Time NTP server address 1 NTP server address 2 NTP server address 3 32 HP StoreOnce 2.x.x to 3.x.x Software Conversion Checklist - HP StoreOnce D2D4112 | HP StoreOnce Conversion from 2.x.x software to 3.4.x (or - Page 33
Table 7 Configuration settings (continued) Licenses Capacity License File(s) Replication License File Settings to be restored during or after conversion 33
HP StoreOnce Backup system
Conversion from 2.x.x software to 3.4.x (or
later) software user guide
Abstract
HP is offering existing StoreOnce D2D Single Node customers the ability to convert their appliance's existing software from
2.x.x to the new 3.4.x (or later) StoreOnce software for free. HP StoreOnce 3.4.x (or later) software is significantly different
to 2.x.x software and, as such, the conversion process is data and configuration destructive. It is recommended that ONLY
customers who need to take advantage of the new features convert their products. The conversion process is described in this
user guide.
Please note that earlier versions of StoreOnce 3.x.x software are not appropriate for this conversion.
Use the checklist at the end of this document to assist you in the conversion process.
IMPORTANT:
The following older products running 2.x.x software are
not
supported for conversion:
•
HP StoreOnce D2D4106fc Backup system: EH998A
•
HP StoreOnce D2D4112 Backup system: EH993B
HP Part Number: BB852-90949
Published: October 2013
Edition: 3