HP Superdome SX2000 Installation Guide, Sixth Edition - HP Integrity Superdome - Page 18

Front of Cabinet Container, WARNING, Cutting the Polystrap Bands, about 12 feet

Page 18 highlights

1. Position the packaged cabinet so that a clear area about three times the length of the package (about 12 feet or 3.66 m) is available in front of the unit, and at least 2 feet (0.61 m) are available on the sides. Figure 1-3 Front of Cabinet Container WARNING! Do not stand directly in front of the strapping while cutting it. Hold the band above the intended cut and wear protective glasses. These bands are under tension. When cut, they spring back and can cause serious eye injury. 2. Cut the plastic polystrap bands around the shipping container (Figure 1-4 (page 18)). Figure 1-4 Cutting the Polystrap Bands 18 Installing the System

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68

1.
Position the packaged cabinet so that a clear area about three times the length of the package
(
about 12 feet
or 3.66 m) is available in front of the unit, and at least 2 feet (0.61 m) are
available on the sides.
Figure 1-3 Front of Cabinet Container
WARNING!
Do not stand directly in front of the strapping while cutting it. Hold the band
above the intended cut and wear protective glasses. These bands are under tension. When
cut, they spring back and can cause serious eye injury.
2.
Cut the plastic polystrap bands around the shipping container (
Figure 1-4 (page 18)
).
Figure 1-4 Cutting the Polystrap Bands
18
Installing the System