HP Surestore 64 FW 05.01.00 and SW 07.01.00 Director Power Cord Advisory Read
HP Surestore 64 - Director Switch Manual
 |
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Surestore 64 manual content summary:
- HP Surestore 64 | FW 05.01.00 and SW 07.01.00 Director Power Cord Advisory Read - Page 1
for the HP StorageWorks Director 2/140 and Director 2/64 includes a total of four (4) power cords: ■ Two (2) PDU (power distribution unit) power cords (Director 2/64 or 2/140) ■ Two (2) 110-volt AC power cords (Director 2/64 only) You must connect the Director 2/140 or the Director 2/64 to a power - HP Surestore 64 | FW 05.01.00 and SW 07.01.00 Director Power Cord Advisory Read - Page 2
prevent electric shock when connecting the Director to primary facility power, use only the supplied power cord(s), and ensure the facility power receptacle is the correct type, supplies the required voltage, and is properly grounded. 2 Read Me First - HP StorageWorks Director Power Cord Advisory
-
1 -
2
 |
 |
© Copyright 2002-2003 Hewlett-Packard Development Company, L.P.
AA-RTDMB-TE/958-000279-001
Printed in the U.S.A.
June 2003
Product names mentioned herein may be trademarks of their respective companies as reflected by an associated
footnote. The information in this document is subject to change without notice.
read me first
hp
StorageWorks
director power cord advisory
Product Version:
FW V05.01.00-24/HAFM SW V07.01.00-09
The installation kit for the HP StorageWorks Director 2/140 and Director 2/64
includes a total of four (4) power cords:
■
Two (2) PDU (power distribution unit) power cords (Director 2/64 or 2/140)
■
Two (2) 110-volt AC power cords (Director 2/64 only)
You must connect the Director 2/140 or the Director 2/64 to a power source using
the appropriate cords as described in the following sections.