HP Surestore 64 FW 05.01.00 and SW 07.01.00 Director Torque Tool Caution Read
HP Surestore 64 - Director Switch Manual
View all HP Surestore 64 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Surestore 64 manual content summary:
- HP Surestore 64 | FW 05.01.00 and SW 07.01.00 Director Torque Tool Caution Read - Page 1
set to release at a torque value of six inch-pounds. Do not use an Allen wrench or torque tool designed for use with another HP product. © Copyright 2002-2003 Hewlett-Packard Development Company, L.P. AA-RTDEB-TE/958-000282-001 Printed in the U.S.A. June 2003 Product names mentioned herein may - HP Surestore 64 | FW 05.01.00 and SW 07.01.00 Director Torque Tool Caution Read - Page 2
in the appropriate Director service manual before performing a FRU repair. This reference gives additional steps that are required to reduce the possibility of problems or customer down time. clockwise, the card locks into place. 2 Read Me First - HP StorageWorks Director Torque Tool Caution
© Copyright 2002-2003 Hewlett-Packard Development Company, L.P.
AA-RTDEB-TE/958-000282-001
Printed in the U.S.A.
June 2003
Product names mentioned herein may be trademarks of their respective companies as reflected by an associated
footnote. The information in this document is subject to change without notice.
read me first
hp
StorageWorks
director torque tool caution
Product Version:
FW V05.01.00-24/HAFM SW V07.01.00-09
The torque tool (P/N A6534-67011) with 5/32-inch
hexagonal adapter (P/N A6534-67012) shown at right
is required to remove and replace Director logic cards.
Caution:
Use of the wrong tool may overtighten and damage the Director
logic and port cards. The torque tool supplied with the Director is designed to
tighten these cards and is set to release at a torque value of six inch-pounds.
Do not
use an Allen wrench or torque tool designed for use with another HP
product.