HP T1120ps HP Designjet T1120 Printer Assembly Instructions: English
HP T1120ps - DesignJet Color Inkjet Printer Manual
UPC - 884420611936
View all HP T1120ps manuals
Add to My Manuals
Save this manual to your list of manuals |
HP T1120ps manual content summary:
- HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 1
HP Designjet T1120 and T620 Printer Assembly Instructions © 2008 Hewlett-Packard Company Inkjet Commercial Division Avenida Graells 501 · 08174 Sant Cugat del Vallès Barcelona · Spain All rights reserved Printed in Germany · Imprimé en Allemagne · Stampato in Germania 1 Read these instructions - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 2
largest one. To do so you may need two people, one at each end. 5 Remove the pieces of cardboard. 6 Remove the rear tray from the printer box. Note: If you don't find the tray in the box, it may already be installed. 7 Lift up the sides and top of the - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 3
the stand box: 16 screws to assemble the stand, 4 to attach it to the printer, and 2 are spare. Do not try to remove the washers from the screws. then tighten them up. 17 Return to the main body of the printer, carefully turn the printer upside down in order to attach the legs. 18 Remove the small - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 4
, so that the colored buttons on the legs fit into the corresponding holes in the printer. Notice that the printer body is upside down. 24 When the legs are correctly located on the printer, attach them to the printer using two screws for each leg. 25 Check that you have used a total of twenty - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 5
may break. 29 If necessary, rotate the wheel. 31 The lock on each wheel should be facing inwards (away from the floor). 24:60kg 44:80kg 31 Now hold the printer by the foam end pieces and by the center rear, and continue to rotate it until it stands on its feet, all - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 6
Attach the basket's front tube to the two short tubes on each foot. 39 Rest the basket's rear tube on the supports that you have just fitted to each leg of the stand. 40 The basket is now complete. 41 Remove the orange tape from the printer window. 42 Open the window (printer's top cover). - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 7
support up and out of the printer. It will not be needed again; you can discard it. 46 Inside the right-hand side of the printer, you will see an orange carriage stopper. Release the stopper by lifting the lever wrapped with light blue paper, then remove the stopper from the printer. 47 Part - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 8
Install the ink cartridges 51 Connect the supplied network cable or a certified USB 2.0 cable to the appropriate socket on the rear right of the printer, and secure the cable with the clip provided, to prevent accidental unplugging. 52 Connect the power cable to the printer's power socket. 53 - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 9
the ink cartridges correctly, the printer must prepare the ink system for its first use. It will do this immediately if you press the OK key, or after a 60-second pause if you do not press the OK key. When the ink system is ready, the front panel will prompt you to open the window. 60 - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 10
to follow the software installation instructions. Connecting your printer before installing the software can lead to printer errors. HP Designjet T1120 Printer HP Start-up Kit 72 Once the printhead check has finished the printer will be ready to load paper for the printhead alignment. 73 When the - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 11
. It can be started from the Printer Utility program installed as part of your printer software, or from the front panel's Image Quality Maintenance menu. 82 1- View ink levels 2- View loaded paper 3- Unload paper 4- Form feed and cut 5- Back 6- Menu 7- Power 8- cancel 9- OK 2 1 98 4 3 56 - HP T1120ps | HP Designjet T1120 Printer Assembly Instructions: English - Page 12
. * Open the Mac OS X HP Designjet Installer icon and follow the instructions on your screen. NOTE: If the installation failed, reinstall the software from: HP Designjet T1120: http://www.hp.com/go/T1120/drivers or http://www.hp.com/go/T1120PS/drivers HP Designjet T620: http://www.hp.com/go/T620
Read these instructions carefully...
What you will need for this procedure
• Because the printer is heavy, you may
need three people to unpack it. When
more than one person is needed, this
symbol is displayed.
• To assemble the printer you will need at
least 1 x 2 m (40 x 80 in) of empty floor
space.
*Whenever you see this icon, you can find
an animation illustrating the procedure on
the HP Start-Up Kit DVD.
Printer working area
Before you start unpacking, consider where
you are going to put the assembled printer.
You should allow some clear space on all
sides of the printer box. The recommended
clearances are shown in the illustration
above.
Note: If your printer is 24-in without stand,
remove the printer box and the accesso-
ries box, place the printer on a table and
remove the desiccant bag from below the
printer. Then go to step 32.
HP Designjet
T1120
and T620
Printer Assembly
Instructions
© 2008 Hewlett-Packard Company
Inkjet Commercial Division
Avenida Graells 501 · 08174
Sant Cugat del Vallès
Barcelona · Spain
All rights reserved
Printed in Germany · Imprimé en Allemagne · Stampato in Germania
1
2
*