HP T5530 Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients
HP T5530 - Compaq Thin Client Manual
UPC - 882780773684
View all HP T5530 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP T5530 manual content summary:
- HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 1
Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 2
HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP -Packard Company. Hardware Reference Guide Business PCs September 2007 Document Part Number: 437853-002 - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 3
to follow directions could result in bodily harm or loss of life. CAUTION: Text set off in this manner indicates that failure to follow directions could result in damage to equipment or loss of information. NOTE: Text set off in this manner provides important supplemental information. ENWW iii - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 4
iv About This Book ENWW - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 5
panel 11 External drives ...12 3 Specifications 4 Security provisions Securing the thin client ...14 5 Mounting the thin client HP Quick Release ...15 Supported mounting options 17 Non-supported mounting option 19 6 Thin client operation Routine thin client care ...20 Supported orientations ...20 - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 6
Grounding methods ...23 8 Shipping information Shipping preparation ...24 Important service repair information 24 vi ENWW - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 7
the hardware and software installed on a specific model, visit http://h18004.www1.hp.com/products/thinclients/index.html and search for a specific thin client model. The following features are common to all HP thin clients: ● no moving parts ● no hard drives or diskette drives ● 5-minute setup time - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 8
Universal serial bus (USB) connectors (2) (4) Power LED * For more information, refer to the model-specific QuickSpecs at http://h18004.www1.hp.com/products/quickspecs/ QuickSpecs_Archives/QuickSpecs_Archives.html Secure USB compartment ports Figure 1-2 Secure USB compartment ports The secure - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 9
Monitor connector (3) Parallel connector (7) Serial connector (4) Universal serial bus (USB) connectors (4) (8) Power connector For more information, see the model-specific QuickSpecs at http://h18004.www1.hp.com/products/quickspecs/ QuickSpecs_Archives/QuickSpecs_Archives.html Installing - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 10
lift the stand off the unit (2). Figure 1-5 Removing the stand Using the keyboard Figure 1-6 Keyboard features (1) Caps Lock key (2) Scroll Lock key (3) Num Lock key with another key; its function depends on the application software you are using. Opens the Start menu in Microsoft Windows. Use in - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 11
key combinations also work on HP Compaq t5135/t5530 thin clients: Alt + Esc Alt + Tab Alt + Shift + Tab Cycles through minimized applications. Cycles through open applications. Switches to the previous session. Special mouse functions Most software applications support the use of a mouse. The - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 12
Serial number location Every thin client includes a unique serial number located as shown in the following illustration. Have this number available when contacting HP customer service for assistance. Figure 1-7 Serial number location 6 Chapter 1 Product features ENWW - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 13
and power cords. 6. Turn on the monitor, the thin client, and any devices you want to test. 7. Load any necessary drivers. NOTE: You can download select hardware drivers from HP at http://www.hp.com/country/us/eng/ support.html. 8. Reconfigure the thin client, if necessary. Installing USB devices - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 14
before and after installing or replacing hardware. Removing the secure USB compartment cover Use the following procedure to remove the secure USB compartment cover. WARNING! Before removing the secure USB compartment cover, ensure that the thin client is turned off and the power cord is disconnected - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 15
Installing the USB device ▲ Insert the USB device into the USB port in the secure USB compartment. See the following illustration for the location of the ports in the secure USB compartment. Figure 2-2 Secure USB compartment port location Replacing the secure USB compartment cover To replace the - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 16
the side access panel, ensure that the thin client is turned off and the power cord is disconnected from the electrical outlet. To remove the access panel: 1. Remove the secure compartment cover (1). For more information, see Removing the secure USB compartment cover on page 8. 2. Remove the two - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 17
2. Lift the metal side cover up and off the unit (2). Figure 2-5 Removing the metal side cover Removing and replacing the battery To remove and replace the battery: 1. Locate the battery on the system board. 2. Pull back on the clip (1) that is holding the battery in place, and then remove the - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 18
2-8 Replacing the side access panel External drives Various external USB drives are available as options for the t5135/t5530. For more information about these drives, visit http://www.hp.com/products/thinclientsoftware, or refer to the instructions that accompany the option. For more information - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 19
Specifications Table 3-1 HP Compaq t5135/t5530 Thin Client Dimensions and number of options installed. ** The operating temperature range when the thin client is attached to a flat panel using the HP Quick ) 3048 m 9144 m Power Supply Operating Voltage Range Rated Line Frequency 100-240 VAC 50-60 Hz - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 20
4 Security provisions Securing the thin client The HP Compaq t5135/t5530 thin client is designed to accept a security cable lock. This cable lock prevents unauthorized removal of the thin client, as well as locking the secure compartment. To order this option, visit the HP Web site at http://h30143. - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 21
The HP Compaq t5135/t5530 thin client incorporates four mounting points on each side of the unit. These mounting points follow the VESA (Video Electronics Standards Association) standard, which provides industry-standard mounting interfaces for Flat Displays (FDs), such as flat panel monitors, flat - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 22
four 10 mm screws included in the mounting device kit, attach one side of the HP Quick Release to the thin client as shown in the following illustration. Figure 5-2 Connecting the HP Quick Release to the thin client 2. Using four screws included in the mounting device kit, attach the other side of - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 23
rounded opening on the other side face upward. Supported mounting options The following illustrations demonstrate some of the supported and not supported mounting options for the mounting bracket. ● You can mount a thin client between a flat panel monitor and the wall. Figure 5-5 Thin client mounted - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 24
Figure 5-6 Thin client mounted on back of monitor stand ● You can mount the thin client on a wall. Figure 5-7 Thin client mounted on wall ● You can mount the thin client under a desk. 18 Chapter 5 Mounting the thin client ENWW - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 25
Figure 5-8 Thin client mounted under desk Non-supported mounting option CAUTION: Mounting a thin client in an non-supported manner could result in failure of the HP Quick Release and damage to the thin client and/or other equipment. Do not mount the thin client on a flat panel monitor stand, between - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 26
for the thin client, see Specifications on page 13. ● Keep liquids away from the thin client and keyboard. ● Turn off the thin client and wipe the exterior with a soft, damp cloth as needed. Using cleaning products may discolor or damage the finish. Supported orientations HP supports the following - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 27
● You can lay the thin client under a monitor stand with at least one inch of clearance. Figure 6-3 Under monitor stand Non-supported orientation HP does not support the following orientation for the thin client. CAUTION: Non-supported placement of thin clients could result in operation failure - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 28
Do not put thin clients in drawers or other sealed enclosures. Thin clients require proper ventilation to maintain operating temperatures. Figure 6-4 Do not put thin clients in drawers or other sealed enclosures 22 Chapter 6 Thin client operation ENWW - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 29
or installing electrostatic-sensitive parts: ● Use a wrist strap connected by a ground cord to a grounded Thin Client chassis. workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats. ● Use conductive field service tools. ● Use a portable field service - HP T5530 | Hardware Reference Guide HP Compaq t5135/t5530 Thin Clients - Page 30
. NOTE: For environmental nonoperating ranges, see Specifications on page 13. Important service repair information In all cases, remove and safeguard all external options before returning the thin client to HP for repair or exchange. In countries that support customer mail-in repair by returning the
Hardware Reference Guide
HP Compaq t5135/t5530 Thin Clients