HP TopShot LaserJet Pro M275 HP LaserJet Pro 200 color MFP M275nw - Clear jams
HP TopShot LaserJet Pro M275 Manual
 |
View all HP TopShot LaserJet Pro M275 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP TopShot LaserJet Pro M275 manual content summary:
- HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Clear jams - Page 1
LASERJET PRO 200 COLOR MFP M275nw Clear jams Jam locations Jams can occur in these locations: 1 2 3 1 Output bin 2 Rear door 3 Input tray Loose toner might remain in the product after a jam. This problem typically resolves itself after a few sheets have been printed. © 2011 Copyright - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Clear jams - Page 2
the sheet tears, remove all fragments before continuing. Do not use sharp objects to remove fragments. 3. Raise the camera arm to the fully open position. LASERJET PRO 200 2 - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Clear jams - Page 3
4. Remove the capture stage and set it aside. 5. Open and close the print cartridge door to reset the product. © 2011 Copyright Hewlett-Packard Development 3 Company, L.P. - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Clear jams - Page 4
6. Reinstall the capture stage. 7. Lower the camera arm. NOTE: Lower the camera arm to protect the camera lens cover from damage. Clear jams from the output bin 1. Raise the camera arm to the fully open position. LASERJET PRO 200 4 - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Clear jams - Page 5
2. Remove the capture stage and set it aside. 3. With both hands, grasp the paper, and carefully pull it free from the product. NOTE: If the sheet tears, remove all fragments before continuing. Do not use sharp objects to remove fragments. © 2011 Copyright Hewlett-Packard Development 5 Company, - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Clear jams - Page 6
above the rear door, and it is hot. Do not attempt to reach into the area above the rear door until the fuser is cool. LASERJET PRO 200 6 - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Clear jams - Page 7
2. With both hands, grasp the paper, and carefully pull it free from the product. NOTE: If the sheet tears, remove all fragments before continuing. Do not use sharp objects to remove fragments. 3. Close the rear door. © 2011 Copyright Hewlett-Packard Development 7 Company, L.P.
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
LASERJET PRO 200
COLOR MFP M275nw
Clear jams
Jam locations
Jams can occur in these locations:
1
3
2
1
Output bin
2
Rear door
3
Input tray
Loose toner might remain in the product after a jam. This problem typically resolves itself after a few sheets have
been printed.
© 2011 Copyright Hewlett-Packard Development
Company, L.P.
1