HP TopShot LaserJet Pro M275 HP LaserJet Pro 200 color MFP M275nw - Replace th
HP TopShot LaserJet Pro M275 Manual
 |
View all HP TopShot LaserJet Pro M275 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP TopShot LaserJet Pro M275 manual content summary:
- HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 1
LASERJET PRO 200 COLOR MFP M275nw Replace the imaging drum NOTE: The imaging drum installed in this product is covered by the product warranty. Replacement imaging drums have a one-year limited warranty from the date of installation. The imaging drum installation date displays on the supplies status - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 2
3. Remove the capture stage and set it aside. 4. Open the print-cartridge door. 5. Pull the input tray straight out to remove it. LASERJET PRO 200 2 - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 3
6. Pull out on the top right portion of the front cover, and rotate it forward to release the right side. Remove the front cover from the product. 7. Lift the two levers that hold the imaging drum. 8. Remove the old imaging drum. © 2011 Copyright Hewlett-Packard Development 3 Company, L.P. - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 4
not expose the imaging drum to light. Cover it with a piece of paper. CAUTION: Do not touch the green roller. Fingerprints on the imaging drum can cause print-quality problems. 11. Insert the new imaging drum in the product. 12. Lower the two levers that hold the imaging drum. LASERJET PRO 200 4 - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 5
13. Reinstall the front cover. Insert the left side first, and then rotate the cover into place. 14. Reinstall the input tray. 15. Close the print-cartridge door. © 2011 Copyright Hewlett-Packard Development 5 Company, L.P. - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 6
16. Reinstall the capture stage. 17. Lower the camera arm. NOTE: Lower the camera arm to protect the camera lens cover from damage. LASERJET PRO 200 6 - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 7
18. Load the paper in the input tray. 19. Adjust the guides until they are snug against the paper. © 2011 Copyright Hewlett-Packard Development 7 Company, L.P.
-
1 -
2 -
3 -
4 -
5 -
6 -
7
 |
 |
LASERJET PRO 200
COLOR MFP M275nw
Replace the imaging drum
NOTE:
The imaging drum installed in this product is covered by the product warranty. Replacement imaging
drums have a one-year limited warranty from the date of installation. The imaging drum installation date displays
on the supplies status page. The HP Premium Protection Warranty applies only to the print cartridges for the
product.
CAUTION:
Do not remove the imaging drum from its package until you are ready to use it.
1.
Remove the paper from the input tray.
2.
Raise the camera arm to the fully open
position.
© 2011 Copyright Hewlett-Packard Development
Company, L.P.
1