HP TopShot LaserJet Pro M275 HP LaserJet Pro 200 color MFP M275nw - Replace th
HP TopShot LaserJet Pro M275 Manual
View all HP TopShot LaserJet Pro M275 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP TopShot LaserJet Pro M275 manual content summary:
- HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 1
LASERJET PRO 200 COLOR MFP M275nw Replace the print cartridges CAUTION: Do not remove print cartridges from their packages until you are ready to use them. 1. Raise the camera arm to the fully open position. 2. Remove the capture stage and set it aside. © 2011 Copyright Hewlett-Packard Development - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 2
3. Open the print-cartridge door, and identify which print cartridge is in the opening. 4. If the cartridge that you need to replace is not in the opening, close the print-cartridge door. 5. From the Home screen on the product control panel, touch the Supplies button. LASERJET PRO 200 2 - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 3
carousel is in the correct position. NOTE: All doors must be closed when pressing the Cartridge Rotate button. Also, the imaging drum must be installed for the Cartridge Rotate button to work. 7. Wait until the Rotating message disappears and the rotation sounds stop, and then open the print - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 4
in the carousel slot to make sure the print cartridge color matches the carousel position. (The black carousel position has no label.) CAUTION: If toner gets on your clothing, wipe it off with a dry cloth and wash the clothing in cold water. Hot water sets toner into the fabric. LASERJET PRO 200 4 - HP TopShot LaserJet Pro M275 | HP LaserJet Pro 200 color MFP M275nw - Replace th - Page 5
Calibrating... message. Allow a few minutes for the product to calibrate. NOTE: If you need to replace another print cartridge, you must close the print cartridge door before touching the Cartridge Rotate button again. You do not need to wait for the product to calibrate when replacing the second
LASERJET PRO 200
COLOR MFP M275nw
Replace the print cartridges
CAUTION:
Do not remove print cartridges from their packages until you are ready to use them.
1.
Raise the camera arm to the fully open
position.
2.
Remove the capture stage and set it aside.
© 2011 Copyright Hewlett-Packard Development
Company, L.P.
1