HP TouchSmart 9100 Installing Microsoft Windows XP Operating System

Installing Microsoft Windows XP Operating System

Install Microsoft Windows XP in IDE mode before downloading drivers. Complete the following:

1.

Turn on or restart the computer.

2.

As soon as the computer is turned on, press F10 to enter BIOS.

3.

Select Advanced Tab and change the SATA 1 Controller mode from AHCI to IDE.

NOTE

: It is recommended that you update to Microsoft XP Service Pack 3.

By downgrading to XP you will not be able to take advantage of the full 4GB of RAM that comes

as default on the HP dx9000 TouchSmart or TouchSmart 9100.

Due to limited driver support for Microsoft Windows XP, you may have additional items in

Device Manager that do not have drivers. The drivers provided should enable basic functionality

of this system.

© 2010 Hewlett-Packard Development Company, L.P. HP, Hewlett Packard, and the Hewlett-Packard logo are

trademarks of Hewlett-Packard Development Company, L.P. in the U.S. and other countries.

Microsoft,

Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in the

United States and/or other countries.

575060-001, February 2010