HP Vectra XA 6/xxx HP Vectra XA 6/xxx, Replacing the LAN accessory board
HP Vectra XA 6/xxx Manual
 |
View all HP Vectra XA 6/xxx manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Vectra XA 6/xxx manual content summary:
- HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Replacing the LAN accessory board - Page 1
twty-fly.fb4 Page 2 Thursday, December 12, 1996 6:19 PM Replacing the LAN 1 Remove the defective board from the PCI slot. Disconnect the accessory board in a External Start cable from the board, if necessary. standard PCI slot 2 Mount the PCI slot bracket on the replacement board. 3 Connect the - HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Replacing the LAN accessory board - Page 2
twty-fly.fb4 Page 1 Thursday, December 12, 1996 6:19 PM Replacing the LAN accessory board This document explains how to replace the LAN accessory board: • in the dedicated PCI accessory slot (desktop models only) • in a standard PCI slot (desktop and minitower models). Replacing the LAN 1 Remove
-
1 -
2
 |
 |
Replacing the LAN
accessory board in a
standard PCI slot
1
Remove the defective board from the PCI slot. Disconnect the
External Start cable from the board, if necessary.
2
Mount the PCI slot bracket on the replacement board.
3
Connect the External Start cable to the replacement board (if
required) and then insert the board in the PCI slot.
The board may be
installed in a
minitower model
or in a desktop model
Printed 12/96
Part Number: 5965-4051
twty-fly.fb4
Page 2
Thursday, December 12, 1996
6:19 PM