HP Vectra XA 6/xxx HP Vectra XA 6/xxx, Using SCSI

HP Vectra XA 6/xxx Manual

Get HP Vectra XA 6/xxx PDF manuals and user guides View all HP Vectra XA 6/xxx manuals
Add to My Manuals
Save this manual to your list of manuals

HP Vectra XA 6/xxx manual content summary:

  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 1
    naj-scsi.bk : cover.fb4 Page 1 Friday, January 3, 1997 3:05 PM Using SCSI HP Vectra How to connect and configure SCSI accessories
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 2
    naj-scsi.bk : naj-scsi.toc Page ii Friday, January 3, 1997 3:05 PM Contents Connecting an External SCSI Accessory 2 Connecting an Internal SCSI Accessory 5 Configuring a SCSI Accessory using SCSISelect 6 Troubleshooting 13 English ii
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 3
    fb4 Page 1 Friday, January 3, 1997 3:05 PM Using SCSI Your Vectra has a SCSI controller and SCSI hard disk drive for high-end performance and open-ended flexibility. The SCSI controller can support up to seven SCSI devices. Use this guide if you want to install an additional SCSI device or configure
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 4
    setting jumpers on the SCSI accessory). Refer to the manual provided with the SCSI accessory for instructions on selecting a SCSI address. SCSI addresses range from address for Plug and Play SCSI devices (SCSI devices which support the SCAM protocol). 2 Connect the SCSI accessory to your
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 5
    3, 1997 3:05 PM Connecting an external SCSI accessory to a Vectra Minitower Using SCSI NOTE The total length of the external SCSI cable or cables should not exceed 3 meters (approximately 10 feet). Contact your dealer to order shielded HP SCSI cables to connect external SCSI accessories. 3
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 6
    the SCSI accessory is terminated correctly-either internally or by a termination device (refer to the manual provided with the SCSI accessory). Make sure the SCSI accessory is terminated 4 Refer to the manual provided with the SCSI accessory to learn how to install any software that may be required
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 7
    , January 3, 1997 3:05 PM Connecting an Internal SCSI Accessory Refer to the chapter "How to Install Accessories" in your computer's User's Guide for information about installing internal devices. Your computer has an internal SCSI cable for connecting SCSI devices. When installing an internal SCSI
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 8
    keyboards, press + the "Q" key.) Viewing the Options menu When you run the SCSISelect utility, the Options menu is displayed. SCSISelect(TM) Utility v1.xxx Would you like to configure the interface, or run the SCSI disk utilities? Select the option and press . Press to switch between
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 9
    are not changed. Interface Settings Menu SCSISelect(TM) Utility v1.xxx Configuration SCSI Bus Interface Definitions Interface SCSI ID 7 SCSI disable SCSI Parity Checking if any of the attached SCSI devices do not support SCSI parity. • Host Adapter SCSI Termination Sets termination on the SCSI
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 10
    SCSI Disk Utilities (refer to page 12). SCSISelect(TM) Utility v1.xxx Boot Device Configuration Please run SCSI Disk Utilities to get present devices in Boot Target ID 0 Options Listed Below Have NO EFFECT if Multiple Lun Support is Disabled Boot Lun Number 0 Arrow keys to move cursor,
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 11
    run the SCSI Disk Utilities (refer to page 12). SCSISelect(TM) Utility v1.xxx SCSI Device Configuration SCSI Device ID #0 #1 #2 #3 #4 #5 #6 #7 a maximum transfer rate of 10.0 MB/s. Certain older SCSI-1 devices do not support Ultra SCSI (up to 20.0 MB/s) or Fast SCSI data transfer rates (up
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 12
    . Advanced Configuration It is recommended that these settings not be changed. Options Menu SCSISelect(TM) Utility v1.xxx Advanced Configuration Options Plug and Play Scam Support Enabled Options Listed Below Have NO EFFECT if the BIOS is Disabled Host Adapter BIOS (Configuration Utility Reserves
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 13
    BIOS is enabled. The SCSI adapter BIOS must be enabled if the computer boots from a SCSI hard disk drive. This option is enabled by default. • Support Removable Disks Under BIOS as Fixed Disks When Boot Only is selected, only the removable media drive designated as the boot device is treated as
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 14
    SCSI SCSI Disk Utilities • Multiple LUN Support This option determines whether booting a SCSI device that has multiple LUNs is supported. Set this option to Enabled if your SCSI devices on the SCSI bus. The list shows the SCSI ID and name of each SCSI device. You can use this list to discover the
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 15
    scsi.fb4 Page 13 Friday, January 3, 1997 3:05 PM Troubleshooting If the SCSI Hard Disk Does Not Work 1 Check power and data cables are correctly connected (refer to the chapter in your User's Guide about installing accessories). 5 Ensure that the SCSI adapter board is firmly and securely inserted
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 16
    which is not SCAM compatible, then set the Plug and Play Scam Support option in the SCSISelect utility to Disabled (refer to page 10). To know if a SCSI accessory is SCAM compatible, refer to the manual provided with the accessory. 8 Check that the SCSI devices are recognized at
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 17
    naj-scsi.bk : bcover.fb4 Page 15 Friday, January 3, 1997 3:05 PM NOTICE The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability
  • HP Vectra XA 6/xxx | HP Vectra XA 6/xxx, Using SCSI - Page 18
    naj-scsi.bk : bcover.fb4 Page 16 Friday, January 3, 1997 3:05 PM 50% Paper not bleached with chlorine Part Number 5965-4057-EN Printed in France 12/96
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
HP Vectra
Using SCSI
How to connect and configure SCSI accessories
naj-scsi.bk : cover.fb4
Page 1
Friday, January 3, 1997
3:05 PM