HP Workstation xw4100 Quick Install Guide - Adaptec SCSI RAID 2120S Controller
HP Workstation xw4100 Manual
View all HP Workstation xw4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Workstation xw4100 manual content summary:
- HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 1
your workstation as the RAID array you are be creating. For example, if you use 36GB, U320 SCSI, 10K RPM hard drives, all drives should be the same type. More information about RAID and other installation options can be found on the Management Software, Drivers & Documentation CD. This guide covers - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 2
4. Updating the driver 5. Window Management Software Installation (Optional) Pre-installation Preparation Be sure your workstation has the latest system BIOS installed. Check the HP support website at www.hp.com/go/workstationsupport. If your system does not have the latest system BIOS, download and - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 3
boot device (as opposed to the IDE drives) or the Adaptec RAID Controller is listed at the top under Controller Order. Save the configuration changes and exit the setup. The system reboots. NOTE: The BIOS settings might differ depending on your system model. Refer to your system manual for specific - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 4
2. Compare the driver version with the one you wrote down from the support website earlier. If they are the same, no action is required. However, if the driver on your system is older than the driver posted on the HP website, download and install the new driver now, using the instructions posted on - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 5
the RAID card and boot to Windows 2000 or Windows XP for the first time, the Welcome to the Found New Hardware Wizard window is displayed. 2. Insert the driver diskette that you created earlier in the Pre-Installation Preparation step. 3. Click Next and follow the on-screen instructions to finish - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 6
325581-002 © 2004 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered trademark of Hewlett-Packard Development Company, L.P. Microsoft and Windows are trademarks of Microsoft Corporation in the U.S. and other countries. - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 7
Adaptec SCSI RAID 2120S Adaptec SCSI RAID (ASR) 2120S Microsoft® Windows® 2000 Windows XP HP xw HP Web www.hp.com/go/workstationsupport HP RAID 36GB、 U320 SCSI、 10K RPM RAID Management Software, Drivers & Documentation CD 1 2 ケース 1 1 2 3. RAID 4 5 6. Windows - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 8
RAID HP SCSI 1 2 3. RAID 4 5. Windows BIOS HP Web www.hp.com/go/workstationsupport BIOS ASR 2120S BIOS Web BIOS Web www.hp.com/go/workstationsupport ASR 2120S Windows Management Software, Drivers & Documentation CD 1. [ADAPTEC Storage Manager Create Driver Disk - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 9
ROM Message Option ROM BIOS 設定で [Option ROM Scan 2 1 IDE SCSI RAID Bootable Add in Card IDE Adaptec RAID Controller Order 注記 : BIOS BIOS 3. Option ROM Adaptec SCSI RAID BIOS Vx.xx [BUILD xxxx Press for Adaptec RAID Configuration Utility Ctrl A RAID 4 Enter - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 10
Enter 6 Insert 7. [Warning! Initialization will erase all Array Information from selected drives. Any Array using any of these drives, as members will be affected. Do you want to continue Y 8 Create Array Enter 9 Insert Enter 10 Array Type Array Label Array Size Stripe - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 11
] と [type of operating system CD CD 3. Microsoft Windows 1 1 a Windows XP b c d SCSI と RAID e Adaptec SCSI RAID 2120S Controller f g 2 Web HP の Web Web 3 2 1. RAID Windows 2000 ま たは Windows XP 2 3 Windows RAID CD に、 Storage Manager Browser Edition 1. CD - HP Workstation xw4100 | Quick Install Guide - Adaptec SCSI RAID 2120S Controller - Page 12
325581-002 © 2004 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered trademark of Hewlett-Packard Development Company, L.P. Microsoft Windows Microsoft Corporation
Quick Install Guide
Adaptec SCSI RAID 2120S Controller
The Adaptec SCSI Raid (ASR) 2120S Controller is supported on the HP Workstation xw series with Microsoft®
Windows® 2000 and Windows XP operating systems only. If you have a workstation with an operating system that is
not listed here, check the HP support website at www.hp.com/go/workstationsupport for a systems supported list.
This site always has the latest product support information and drivers.
NOTE:
This guide is intended for those who have some background knowledge or experience
with computer hardware and software installation.
HP recommends you use the same capacity and type of drives on your workstation as the RAID array you are be
creating. For example, if you use 36GB, U320 SCSI, 10K RPM hard drives, all drives should be the same type.
More information about RAID and other installation options can be found on the
Management Software, Drivers &
Documentation
CD.
This guide covers the following two cases:
Case 1—Installing the operating system on the disk array connected to the controller
Case 2—Creating a single data array on an existing system
Case 1: Installing the Operating System on the Disk Array
Connected to the Controller
This process reinstalls the operating system to a factory ship condition and could take up to a few hours to complete
depending on the speed of your system. Follow the steps below in the order that they are presented:
IMPORTANT:
All of the following steps must be completed in the order shown below for
successful installation of your system.
1.
Pre-Installation Preparation
2.
Hardware Installation
3.
Configuring the RAID array
4.
System Restore Process
5.
Updating the Driver
6.
Window Management Software Installation (Optional)