HP XP20000/XP24000 HP StorageWorks XP24000/XP20000 Audit Log Reference Guide (
HP XP20000/XP24000 Manual
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP XP20000/XP24000 manual content summary:
- HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 1
HP StorageWorks XP24000/XP20000 Audit Log User and Reference Guide Abstract This document describes the system logs generated by XP Remote Web Console and SVP operations. Topics include how to view and redirect log output. The intended audience is a storage administrator or authorized service - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 2
the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial errors or omissions contained herein. Acknowledgments Hitachi and Universal Replicator are registered - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 3
Tool Operation...36 Audit Log Reproduced Output 37 Audit Log Lost Output...37 4 Sample Audit Logs of Remote Web Console PC and SVP Operations 38 5 Account Function 39 Set User Account Operation...39 Set Login Message Operation 41 6 Audit Log Function 43 Audit Log Buffer...43 Create File - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 4
Set Up HTTP Block Operation 52 Storage Device Add Operation 52 Storage Device Del Operation 53 Storage Device Edit Operation 54 8 XP Operation...63 11 CFL Extension Function 64 CflSet Start Operation...64 CflSet End Operation...64 12 XP Continuous Access Software Function 65 Add CTG Operation - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 5
Info Function 89 MailAddress Write Operation 89 Valid Flag Update Operation 89 18 XP External Storage Access Manager function 91 Add Quorum Disk ID Operation 91 Del Quorum Disk ID Operation 91 Paircreate Operation...92 Pairresync Operation...93 Pairsplit-r Operation...93 Pairsplit-S Operation - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 6
Delete Disk Controller (DKC) WWN Operation 115 Delete Host Group Operation 116 Delete LU Path Operation...116 Delete WWN Operation...117 Disk Unit 131 Release LUSE Operation...132 Restore Config. Operation...132 Set Battery Life Operation...133 Set Channel Speed Operation 134 Set Command Device - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 7
Unit (LU) Path Operation 152 Add World Wide Name (WWN) Operation 153 Change Host Group Operation 153 Change WWN Operation...154 Delete Disk Controller (DKC Replace Operation...172 Restore Operation...173 Restore Data Operation...174 Size Change Operation...174 Spare Disk Operation...175 Switch SVP - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 8
(PerfCtrlGrp) Operation 179 Clear PPC Info Operation...179 Default Set Operation...179 XP Performance Control Group (PerfCtrlGrp) Path Operation...193 Add RCU Operation...193 Change RCU Option Operation 194 Delete Path Operation...195 Delete RCU Operation...196 33 Volume Shredder Function 198 End - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 9
34 SI for Mainframe Function 200 Add Pair Operation...200 Change Reserve Operation...200 CTG Operation...201 Delete Pair Operation...201 Initialize Operation...202 Option Operation...202 Resync Pair Operation...203 Split Pair Operation...204 Suspend Pair Operation...204 35 XP Snapshot Function 206 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 10
System Disk Options Operation 231 Volume Initialize Operation...232 Volume to Space Operation 233 40 XP Auto LUN Software Function 234 Create Auto Plan Operation 234 Del - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 11
Other Resources 257 Related Documentation...257 Conventions for Storage Capacity Values 257 HP Technical Support...257 Subscription Service...258 HP Websites...258 Documentation Feedback...258 A Audit Log Information File Output by Function 259 B SVP Operations Output to the Audit Log File 273 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 12
created by the HP StorageWorks XP Remote Web Console computer or SVP (Service Processor) on the storage system. The SVP is a computer that is contained within the storage system. Users can access the audit logs that are output by the SVP, but the SVP is accessible only by HP personnel. This chapter - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 13
Modify or View. See the HP StorageWorks XP24000/XP20000 Remote Web Console User Guide for details for the Remote Web Console main window. To download the audit log information file using the Audit button: 1. Log on as a storage administrator and open the Remote Web Console main window. 2. Click the - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 14
not enter the periods. ◦ Enter the User ID and the Password you use to login the primary FTP server SVP to the FTP server manually. 1. Log on as a storage administrator and open the Remote Web Console main window. 2. Click Go - Security - Audit log Transfer in the menu bar of the Remote Web Console - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 15
server and connect to the SVP before executing the setting to transfer audit logs to the syslog server. See the users manual of the syslog server for the details about the syslog server settings. 2. Log on as a storage administrator and open the Remote Web Console main window. 3. Change to Modify - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 16
the IP Address in Secondary Server Setting. Do not enter the periods. - Enter the Port Number in Secondary Server Setting. You can enter a number from 1 to 65,535. 6. Enter the name of the storage system from which you are transferring the audit log file in Location Identification Name. The name - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 17
to be set to Modify. Make sure that the storage administrator has created a system disk to store audit logs temporarily before storing the logs in the SVP. To configure how to store audit logs: 1. Log on as a storage administrator and open the Remote Web Console main window. 2. Change to Modify mode - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 18
audit logs in a system disk before storing the logs in the SVP. • Disable to store audit logs directly in the SVP. 5. Click Apply. A File Name When AuditSSSSSYYYYMMDDHHMMSS.tgz Transferred to the FTP Server SSSSS = serial number YYYYMMDD = date of the transfer HHMMSS = hour (HH), minute - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 19
of the newest data (wrap around). (File has reached 50% of the maximum number When you reach 70% of this threshold, the yellow of lines.) Audit: Warning button appears on the Remote [Audit Log], Over MaxLine Web Console main window. Start downloading the audit log information file at or before - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 20
of both basic and detailed information about user logins, logouts and disk array configuration change operations. The detailed information includes an index representing each item and its setting's values. The file contains user ID, SLPR number, date, time, function, operation (any except login - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 21
HP StorageWorks XP24000/XP20000 Remote Web Console Error Codes. SVP operations do not output error codes. 2. Received command result • Normal end. The FC-SP authentication has ended sequence number The sequence number of the saved log information (0000000000 to 4294967295). When the number reaches - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 22
SVP failure and a LAN failure, occurs in the storage system, the date and time may be output with the date and time of January 01, 1970. 2 Function names are used as section titles in "Sample Audit Logs of Remote Web Console PC and SVP . The number of occurrences of + represents the number of indents - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 23
The host name (SVP). 4 Program name The detection entity identification character (Storage). 5 Unified specification The Unified specification identification character (CELFSS). identification 6 information The revision number of the Unified specification document (1.1). Syslog Information - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 24
entity identification character (Storage). The host name (SVP). The category name of the event as described in the following example: • Authentication. iSCSI login or authentication of RMI (Remote Method Invocation) • ConfigurationAccess. Setting from Remote Web Console, SVP, or host. • AnomalyEvent - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 25
is not used. 29 SLPR number. 99 is displayed for commands from number and the serial number of the log information are not displayed when the category name is AnomalyEvent. See the descriptions in "Items in Audit Log Information File" (page 20), "Sample Audit Logs of Remote Web Console PC and SVP - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 26
A date and a time being set on SVP are output as log data. If a failure, such as a SVP failure and a LAN failure, occurs in the storage system, the date and time may be (50% of the maximum number of lines). The size of the syslog information file has reached its maximum number of lines. When the - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 27
(page 37) Operation of Remote Web Console and SVP Table 6 (page 27) shows the audit log functions, operations, and program products. Table 6 Audit Log (page 46) SIM complete on the Audit Log Transfer window "Set User Account Operation" (page 39) Changing information on the Account window "Set - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 28
Configuration File Loader "VRM Operation" (page 63) CFL Extension "CflSet Start Operation" (page 64) "CflSet End External Storage Access Manager Software Information "Delete Log Operation" (page 106) "ORM Value Operation" (page 106) Operation about log information on Service Processor (SVP - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 29
" (page 116) "Delete LU Path Operation" (page 116) "Delete WWN Operation" (page 117) "Disk Unit (DKU) Emulation Operation" (page page 132) "Restore Config. Operation" (page 132) "Set Battery Life Operation" (page 133) "Set Channel Speed Operation" (page 134 Operation of Remote Web Console and SVP 29 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 30
"Change Host Group Operation" (page 153) "Change WWN Operation" (page 154) "Delete Disk Controller (DKC) World Wide Name (WWN) Operation" (page 154) "Delete Host Group Operation" (page 155) "Delete Logical Unit (LU) Path Operation" (page 155) "Delete World Wide Name (WWN) Operation" (page 156) "Set - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 31
"Replace Operation" (page 172) "Restore Operation" (page 173) "Restore Data Operation" (page 174) "Size Change Operation" (page 174) "Spare Disk Operation" (page 175) "Switch SVP Operation Switch (S/W) & CU Operation" (page 187) Performance Monitor Operation of Remote Web Console and SVP 31 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 32
port attribute operation from XP Continuous Access Software, Hitachi TrueCopy™ for Mainframe, XP Continuous Access Journal Software, Hitachi Universal Replicator™ for Mainframe, or XP External Storage Software License Key RCU "Add Path Operation" (page 193) RCU operation (XP Continuous Access - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 33
Control Group (PerfCtrlGrp) Operation" (page 179) "Clear PPC Info Operation" (page 179) "Default Set Operation" (page 179) "XP Performance Control Group (PerfCtrlGrp) Delete/Change (Del/Chg Pair Operation" (page 213) "Function Switch Operation" (page 214) Operation of Remote Web Console and SVP 33 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 34
98) "ChangePaths(FIBRE) Operation" (page 98) "CheckPaths(FIBRE) Operation" (page 99) "ChkPath-RestoreVol Operation" (page 100) XP External Storage "DeleteVolume(FIBRE) Operation" (page 100) "Disconnect-Volume Operation" (page 101) "DividePathGroup Operation" (page 102) "Inflow-Control Operation - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 35
(page 240) "VTOC Operation" (page 240) XP Disk/Cache Partition Volume Retention Manager Shredder "End Shredding Operation" (page 198) "Set Shredding Operation" XP Auto LUN Software, see the HP StorageWorks XP24000/XP20000 Auto LUN Software User Guide. Operation of Remote Web Console and SVP 35 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 36
The FC-SP authentication has ended. 252) M/F I/F "M/F I/F - Interface Name" (page The mainframe system host or the 252) storage system has sent the Key Encryption Virtual LVI/LUN VLL Creation of encryption key on SVP PIN Deletion Tool Operation "Function Name and Operation Name Output to - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 37
the audit log by the commands that the storage system accepted from the host has been lost. For an output example about the function name and the event name shown in Table 11 (page 37), see "Sample Audit Logs of Remote Web Console PC and SVP Operations" (page 38). Audit Log Reproduced Output 37 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 38
Remote Web Console PC and SVP Operations This chapter includes a sample audit log for each function and operation that can be performed with the Remote Web Console log in this chapter. user-name User ID xx Streaming Line Printer (SLPR) number. For storage administrators, the number is 99. YYYY/MM/ - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 39
user account. Add: add user account. Change: change, Delete: delete. PassChg: change password UserID Authority The user ID. The authority of the user. User: users right SLPRNo The SLPR number of the user. A dash (-) appears when nothing is changed. 65535: Storage administrator. 1 to 31: Storage - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 40
Name Permission of Storage Partition Administrator1 Remarks 512-146 Not used - 145 Permission of Storage Administrator Yes 2 144 Agent - 3, 2 121 License Key - 3, 2 120-114 Not used - 113 Configuration File Loader - 3, 2 112-106 Not used - 105 Universal Volume Manager - - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 41
or read permission will be valid only when the read permission of storage administrator (145th bit) is valid. 4 For information about using Remote Web Console, contact HP Technical Support. 5 Only read permission will be valid. Set Login Message Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 42
The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this Description Indicates the sentence of login Message displayed on the login window of Remote Web Console. 42 Account Function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 43
. The result of the setting. Normal: Normal end. Error: Abnormal end. The number of options configured. Create File ,,YYYY/MM/DD,HH:MM ended abnormally or was canceled during the operation. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) DKCAuditLog was lost user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 44
ended abnormally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Over MaxLine Event 14> Jan 4 06:25:18 SVP Storage: CELFSS,1.1,250001,,2006-01-04T06:25:18.3Z,Storage,SVP Threshold event Normal end The operation has ended normally. Set FTP Server Operation user-name,xx,YYYY - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 45
file is sent. If the setting is not changed, a hyphen (-) is displayed. The user name to login to the FTP server. If the setting has not changed, a hyphen output to the syslog server. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 46
location identification information for the storage system. Not output when setting number of the LAN when sending the syslog information. If the setting is not changed, a hyphen (-) is displayed. SIM Complete Operation user end The operation has ended normally. Seq.=xxxxxx Sequence number of - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 47
Name,Result}=[{Storage Device List,Normal end},{User Account List, Error(xxxx-yyyy)},{Environment Parameter List,-},{Audit Log Transfer Information,-} [BASE] BASE function Control Panel Backup Control Panel Backup operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 48
,Result}=[{Storage Device List,Normal end},{User Account List, Error(xxxx-yyyy)},{Environment Parameter List,-},{Audit Log Transfer Information,-} [BASE] BASE function Control Panel Restore Control Panel Restore operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 49
:00ff:fedc:50d2 [BASE] BASE function Login Login operation IP= Logged in, Remote Web Console computer IP address Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Environment Setting Operation 49 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 50
of IPv4 and IPv6. Logout Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[BASE],Logout,,Normal end,,,Seq.=xxxxx [BASE] BASE function Logout Logout operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 51
ID row by row) of the version information to be deleted. Product name (P9000 or XP Command View Advanced Edition Software) Version Information Network The number of license information Set System Info Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[BASE],Set System Info,,Normal end,,,Seq - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 52
location of the device. Num of SystemInfo Number of system information. Set Up HTTP Block Operation user-name.xx,YYYY/MM/DD:HH:MM: the HTTP Block setting Normal end: normal end, Error (xxxx-yyyy): Abnormal end xxxx: part code, yyyy: error code Storage Device Add Operation user-name.xx,YYYY/MM/DD: - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 53
the storage system The product name of the storage system The serial number of the storage system The host name or IP address for the storage system The installation location of the storage system The status of the HTTP Block. - : disabled, Blocked : enabled Storage Device Del Operation user-name - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 54
or IPAddress Location HTTP Block Description Item number The nickname of the storage system The product name of the storage system The serial number of the storage system The host name or IP address for the storage system The installation location of the storage system The status of the HTTP Block - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 55
:SS.xxx, 00:00,[BC],Initialize,,Normal end,,,Seq.=xxxxx [BC] HP XP Business Copy Software function Initialize Initialize operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 56
items. X is a number from 03 to 32. Pair Create Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00, [BC],Pair Create,,Normal end,,,Seq.=xxxxx +Copy Pace HP XP Business Copy Software function Pair Create Pair Create operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 57
of the secondary volume in the resynchronized pair The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of resynchronized pairs Pairsplit Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [BC],Pairsplit - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 58
of the secondary volume in the split pair The MU number of the split pair The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code , yyyyy: Error code Num. of Pairs The number of split pairs Pairsplit-E Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 59
of Pairs=2 Example 2 (HP XP Snapshot is used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[BC],Pairsplit-S,,Normal end,,,Seq.=xxxxx +Kind=1,Option=Pair HP XP Business Copy Software function Pairsplit-S Pairsplit-S operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 60
,,,Seq.=xxxxx [Cache] Cache function DCR Prestaging DCR Prestaging operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Delete Cache Residency Manager for z/OS (M/F DCR) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 61
data. The ending LBA number of the cancelled data. This number is output when only the ending LBA is specified for the cancelled data. The number of logical volumes (for an open system) where Cache Residency cache is canceled. Set Cache Residency Manager for z/OS (M/F DCR) Operation user-name,xx - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 62
The ending cylinder number (CC) and the ending head number (HH) of the data resident in Cache Residency cache. The number of the logical volume (for a mainframe system) where the setting information for Cache Residency cache is added or changed. Set Open Cache Residency Manager (DCR) Operation user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 63
. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) VRM Operation The Configuration File Loader log appears in the log file line. It is located between where the line contains "Start" and the line contains "End." user-name,xx - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 64
file. CflSet End Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[CFL Extension],CflSet End,,Normal end,,,Seq=xxxxx [CFL Extension] CFL Extension function CflSet End Operation CflSet End operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 65
Access Software Function Add CTG Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Add CTG,,Normal end,,,Seq.=xxxxx +{LDKC,CTG,Path,Offloading(s),Inflow Control,Copy Pending(min.),RCU Ready(min.)}= {0x00,0x00,Fibre,090,Enable,05,05} [Cnt Ac] HP XP Continuous Access Software function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 66
Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac], Change Option,,Normal end,,,Seq.=xxxxx +{ Parallel Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s), Service SIM,Parallel Initial Copy(CU)}={128,45,70,Not Report,Disable} +{LDKC,CU,Service SIM,PPRC Support,SCP Time - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 67
or not. Enable, Disable LDKC CU Service SIM The LDKC number. The CU number of the connected CU. Indicates whether to report the remote copy-related SIM. Report, Not Report PPRC Support Indicates whether the host supports PPRC. Yes: support, No: not support SCP Time(s) Parallel Initial Copy (CU - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 68
xxxx: Part code, yyyyy: Error code Num. of Pairs The number of changed pairs. Delete CTG Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Delete CTG,0x00:0x00,Normal end,,,Seq.=xxxxxx [Cnt Ac] HP XP Continuous Access Software function Delete CTG Delete Consistency Group operation - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 69
,GR-0xFE-0x3FF,99999,0x00,Default,4,Async,Entire,Never,15,032, Auto,0x00, Group,Normal End}, (snip) -(snip), Num. of Pairs=xx [Cnt Ac] HP XP Continuous Access Software function Paircreate Paircreate operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 70
set (handling if trouble occurs) This value number of created pairs Pairresync Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Pairresync,,Normal end,,,Seq.=xxxxxx +{P-VOL(Port-G-ID-LUN),S-VOL(Port-G-ID-LUN),Fence Level,Copy Pace,Priority,Range, Error Level,Change ESAM,Quorum Disk - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 71
if trouble occurs). disk ID that the ESAM pair uses. This value is output only when Change ESAM is Yes. The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of restored pairs. Pairsplit-r Operation user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 72
asynchronous pair is split only. Drain, Purge Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of split pairs Pairsplit-S Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac],Pairsplit - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 73
of the consistency group is group and the pair status is PSUE) LU: LU (specified asynchronous pairs only) Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of deleted pairs. Pairsplit-S Operation 73 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 74
,No,150,30,No,Use,256,Entire,Normal end},Num. of JNL Grps=2 [Cnt Ac-J] HP XP Continuous Access Journal Software function Journal-Option Journal-Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 75
Operation (continued) Item Result Description The result of the operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of JNL Grps The number of journal groups. Journal-Vol Operation (Add Parameter) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 76
-0x001,0x00,65432,5,32,0x05,Entire,0x02,0x00,Default,Group, Normal end}],Num. of Pairs=2 [Cnt Ac-J] HP XP Continuous Access Journal Software function Paircreate Paircreate operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 77
The path group ID (Default fixed) specified for the storage system The error level; Group: Group level, LU: LU level The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs Pairresync Operation user-name - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 78
number, host group number, and LUN of the secondary data volume MirrorID The mirror ID S/N The serial number of the logical device (storage end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs Pairsplit-r Operation user-name - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 79
number, host group number, and LUN of the secondary data volume MirrorID The mirror ID S/N The serial number of the logical device (storage end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs Pairsplit-S Operation user-name - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 80
The delete mode. Normal: Normal mode, Force: Force mode Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code,yyyyy: Error code Num. of Pairs The number of pairs. Pair-Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac-J],Pair - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 81
Pair-Option Operation (continued) Item Result Description The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of changed pairs. R-Cmd. Dev. Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[UR],R-Cmd - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 82
, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code The number of mirrors changed System-Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Cnt Ac-J],System-Option,,Normal end,,,Seq.=xxxxx +Max Initial Copy=64 [Cnt Ac-J] HP XP Continuous Access Journal Software function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 83
in CU of the index. Num. of Alias LDEVs The number of alias devices allocated to all CU numbers indicated in CU of the index. Delete Alias Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[CPAV],Delete Alias,,Normal end,,,Seq.=xxxxx +LDKC=0x00,CU=0x00 ++{Alias LDEV,Base - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 84
device. Alias LDEV The alias device number allocated to the CU number indicated in CU of the index. Base LDEV The base device number allocated to the CU number indicated in CU of the index. Num. of Alias LDEVs The number of alias devices allocated to the CU number indicated in CU of the index - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 85
Num. of LDEVs The number of the logical volumes where the attribute has been set. 1 When bit 5, 6, and 7 are all 0 (zero), Read/Write has been set. Expiration-Lock Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Data Ret],Expiration-Lock,SLPR#xx:Enable,Normal end,,,Seq.=xxxxx [Data - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 86
expiration-lock setting is disabled for SLPR number xx. The expiration-lock setting is enabled in the storage system. The expiration-lock setting is disabled in the storage system. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 87
16 XP Disk/Cache Partition Function Set Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[DCPart],Set,,Normal end,,,Seq.=xxxxxx + SLPRs=xx [DCPart] HP XP Disk/Cache Partition function Set Set operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 88
to CLPR. When the external volume is present in the parity group, the first letter of the parity group number is E. Num. of PGs Num. of CLPRs Num. of SLPRs The number of parity groups assigned to CLPR. The number of CLPRs by set SLPR. The number of SLPRs set. 88 XP Disk/Cache Partition Function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 89
has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 76 (page 89). Table 76 MailAddress Write Operation Item MailServerSetting Description The specification type - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 90
Email Info function Valid Flag Update Valid Flag Update operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 77 (page 90). Table 77 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 91
LDEV numbers of the added quorum disk. Del Quorum Disk ID Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ESAM],Add Quorum Disk ID,,Normal end,,, Seq.=xxxxx +{Quorum Disk ID,Paired S/N,Controller ID,Quorum Disk(LDKC:CU:LDEV)}= {0x01,60011,5,0x01:0x02:0x03} [ESAM] XP External Storage Access - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 92
,GR-0xFE-0x3FF,99999,0x00,Default,5,Entire,Never,15,032,Auto,0x20, Normal End},(snip) -(snip)], Num. of Pairs=xx [ESAM] XP External Storage Access Manager function Paircreate Paircreate operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 93
,1B-0x00-0x001,Never,15,256,Normal End}, (snip) -(snip), Num. of Pairs=xx [ESAM] XP External Storage Access Manager function Pairresync Pairresync operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 94
-0x001,1B-0x00-0x001,P-VOL,Disable,S-VOL,Normal End}, (snip) -(snip), Num.of Pairs=xx [ESAM] XP External Storage Access Manager function Pairsplit-r Pairsplit-r operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 95
MCU cannot communicate with RCU. No: Pair is deleted only when MCU can change the pair status to SMPL. Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of restored pairs Pairsplit-S Operation 95 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 96
XP External Storage Software Function AddVolume(FIBRE) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],AddVolume(FIBRE),,),,Normal end,,,Seq.=xxxxx +{Vendor,Product,Serial,VolumeID1,VolumeID2,Device,Capa(blocks),ExGroup,PathGroup,CLPR, Emulation,Cache,Inflow,Result}={HITACHI,9500V - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 97
}=[{1A,50560E8000C3E211,Normal end},{1A,50560E8000C3E211,Normal end}, {2A,50560E8000C3E212,Normal end}],Num. of Paths=3 [Ext Stor] HP XP External Storage Software function BlockPaths(FIBRE) BlockPaths(FIBRE) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 98
-CacheMode Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],Change-CacheMode,Enable,Normal end,,,Seq.=xxxxx +{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End}, {E1-4,Normal End}],Num. of Groups=XXX [Ext Stor] HP XP External Storage Software function Change - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 99
}=[{1A,50560E8000C3E211,Normal end},{1A,50560E8000C3E211,Normal end}, {2A,50560E8000C3E212,Normal end}],Num. of Paths=3 [Ext Stor] HP XP External Storage Software function CheckPaths(FIBRE) CheckPaths(FIBRE) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 100
the external storage system. The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Paths The number of mapping paths that path status has been checked. ChkPath-RestoreVol Operation If this operation is performed from Remote Web - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 101
operation was finished. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Ext Stor],Disconnect-Volume,,Normal end,,,Seq.=xxxxxx +{Group,Result}=[{E1-1,Normal End},{E1-2,Error(605-3003)},{E1-3,Normal End}, {E1-4,Normal End}],Num of Groups=XXX [Ext Stor] HP XP External Storage Software function Disconnect - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 102
,Result}=[{1,11,E1-11,Normal end},{1,12,E1-21,Normal end}, {2,21,E2-11,Normal end}],Num. of Volumes=3 [Ext Stor] HP XP External Storage Software function DividePathGroup DividePathGroup operation Normal end The operation has ended normally. Seq.=xxxxxx Serial number of log information (0000000000 to - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 103
of external volume groups configured. UnitePathGroup Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UVM],UnitePathGroup,,Normal end,,,Seq=xxxxx +{PathGroup,TargetPathGroup,Result}=[{1,2,Normal end},{1,3,Normal end},{11,12,Normal end}], Num. of PathGroups=3 [Ext Stor] HP XP External Storage - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 104
(the number of commands that can be issued). The Path Blockade watch value. The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of WWNs The number of WWNs set of the external subsystem. 104 XP External Storage Software Function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 105
FC Function Set SCP Time Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[FC],Set SCP Time,,Normal end,,,Seq.=xxxxx +{LDKC,CU,SCP Change Pending (SCP) Time operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 106
of SSB log. The deletion of Reset log. The deletion of Power Event log. The deletion of Detail log. The deletion of end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) ORM Value Operation Example 1 (changing the threshold of FC/SATA) user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 107
physical device) which is the target of Alter or error reset. The number of PDEVs (physical devices). SIM Complete Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],SIM Complete,,Normal end,,,Seq.=xxxxx +Reference Code=[XXXXXX,XXXXXX,(snip)],Num. of Reference Codes=256 [Information - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 108
request. Num. of Reference The number of SIM reference codes. Codes SIM Reporting Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],SIM Reporting Option,,Normal end,,,Seq.=xxxxx +Type=DKC SIM ++{Acute,Serious,Moderate,Service}={ON,ON,ON,ON} +Type=Cache SIM ++{Acute,Serious - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 109
Description Report service level information as SIM. ON: Report, OFF: Do not report Num. of Types The number of information levels to be reported as SIM. Threshold Value Operation Example 1 user-name,xx,YYYY/MM/DD,HH:MM:SS.xx, 00:00,[Information],Threshold Value,Alter,Normal end,,,Seq.=xxxxx - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 110
threshold of Port 1 error. PDEV The mounting location of PDEV (physical device) that is the target of Alter or error reset. Num. of PDEVs The number of PDEVs (physical devices). 110 Information Function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 111
See the HP StorageWorks XP24000/XP20000 LUN Manager User Guide or the meaning of the host mode number. The number of WWNs of the host registered in the host group. The number of added host groups. Add LU Path Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Add LU Path,,Normal end - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 112
logical volume linked to the host group The number of LU paths set Add WWN Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Add WWN,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,WWN,Nickname }=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}, {XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 113
113). Table 109 All Config Operation Item New Ver. Old Ver. Description The new version number. The old version number. Assist Config Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],Assist Config,,Normal end,,,Seq.=xxxxx +{New Ver.,Old Ver.}={xx-xx-xx/xx,xx-xx-xx/xx} [Install - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 114
Backup Config Operation Item Description Ver. The version number of the configuration information to be backed up. Change Host Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Change Host Group,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,HostGrpName}=[{XX,XXX,XXXXXXXXXXXXXXXX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 115
Seq.=xxxxx [Install] Install function Define Config. Define Config. operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Delete Disk Controller (DKC) WWN Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Delete - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 116
group deleted or initialized was created. The host group number deleted or initialized. The number of host groups deleted or initialized. Delete LU Path Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Delete LU Path,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,LUN,LDKC:CU:LDEV}=[{XX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 117
deleted. Indicates WWN of the host deleted from the host group. The number of hosts (WWN) deleted from the host group. Disk Unit (DKU) Emulation Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],DKU Emulation,,Normal end,,,Seq.=xxxxx +Type=3390 ++LDEV(LDKC:CU:LDEV)=[0x00:0x00:0x00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 118
where the reserve attribute of the host is forcefully cancelled. The number of the port where the reserve attribute of the host is finished. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Format,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 (for an external volume) - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 119
. The LDEV number. The number of LDEVs. Format Stop Operation This log information is output when the format process is suspended. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Format Stop,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 (for an external volume) +PG - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 120
Install Operation Example 1 (installing additional channel adapters) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx +{CHA,Kind}={CHA-1LU,16FS Fibre 8ch-4mp}, ++{Port,Fibre PCB Mode,Initiator/Target,Channel Speed,CU Number} =[{9J,Standard,Target,Auto,00:00-00: - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 121
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx +{DKA,Kind,Transfer Rate}=[{DKA-1AL,DKF 4MP,4},{DKA-1BL,DKF 4MP,4},{DKA-2ML,DKF 4MP,4}, {DKA-2NL,DKF 4MP,4}],Num. of DKAs=4 +{DKU,AC-BOX}=[{DKU-R1,3-phase AC Box(30A)}],Num. of DKUs=1 +FSW=[FSWR10 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 122
BOX The type of AC-BOX Num. of Disk Units The number of Disk Units (DKU) (DKU) FSW The mounting location of the fibre switch. Num. of FSWs The number of FSWs PG The parity group number cache memory) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx +{CM - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 123
. Install: Install battery, Uninstall: Uninstall battery. Num. of Batteries The number of batteries. NOTE: Only the changed items will be output. Example 4 (installing additional shared memory) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx +{SM,Slot,Size - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 124
Redundant The number of additional cluster power supplies. Power Supplies Example 6 (installing additional battery) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Install,,Normal end,,,Seq.=xxxxx +Power Lost Mode=Destage Mode +Battery=[BATTERY-UR00,BATTERY-UR01,BATTERY-UR02,BATTERY-UR03],Num - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 125
Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 128 (page 125). Table 128 Install Operation (Installing Additional Battery) Item Power Lost - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 126
CV unit capacity The setting status of system disk Disable or Enable will appear. SSID Num. of LDEVs The subsystem ID The number of LDEVs Machine Install Date Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Machine Install Date,,Normal end,,,Seq.=xxxxx +Date=YYYY/MM/DD HH - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 127
LUSEs The number of LUSE volumes configured Make Vol./Vol. Init Operation This logged information indicates that the formatting was only requested, but not finished. If the operation does not require the formatting, this logged information indicates that the volume was created. user-name,xx,YYYY - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 128
number of LDEVs Micro Program Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],Micro Program,,Normal end,,,Seq.=xxxxx +Micro Media=Floppy Disk Floppy disk, CD-ROM, SVP HDD, HDD Backup or remote , Skip SCSI Normal, Skip SCSI Force, Alternate Manual, or Alternate Auto). However, it is not - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 129
(continued) Item New Ver Num.of Kind Description The new version number of the microcode. The number of the kind of microcode. MP Install Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],MP Install,,Normal end,,,Seq.=xxxxx +Micro Program={Minimum Config,DKCMAIN,RAMBOOT,LCP,HTP,LCDG - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 130
(HH) which the Cache Residency is set or canceled The ending cylinder number (CC) and the ending head number (HH) which the Cache Residency is set or canceled The number of Cache Residency which has been set or canceled New Installation Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 131
Num of DCR Settings The starting LBA number of the data which Cache Residency was set or canceled The ending LBA number of the data which Cache Residency was set or canceled The number of Cache Residencies set or canceled Patch Edit Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 132
beginning represents the LDKC, CU and LDEV numbers of the top LDEV. Num. of LUSEs The number of LUSE volumes released Restore Config. Operation Example 1 user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Restore Config.,SVP&DKC,Normal end,,,Seq.=xxxxx [Install] Install function Restore Config - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 133
number. The old version number. Set Battery Life Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Battery Life,,Normal end,,,Seq.=xxxxx +{Use Battery Life,Date,Remained Life}={Valid,YYYY/MM/DD,610} [Install] Install function Set Battery Life Set Battery Life operation Normal end - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 134
not set. The remaining date of the battery shelf life. A hyphen (-) is indicated when the information is not set. Set Channel Speed Operation user-name,xx,YYYY/MM/DD,HH:MM Channel Speed operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 135
Num. of LDEVs The number of logical volumes where the command device is set Set Command Device Security (CommandDevSec) Operation user-name,xx,YYYY/MM/DD Set CommandDevSec operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 136
Fibre Channel port address. Num. of Ports The number of ports where address has been set. Set Fibre Topology Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Fibre Topology,,Normal end,,,Seq.=xxxxx +{Port,Fabric,Connection}=[{XX,Enable,FC-AL},{XX,Disable,FC-AL},{XX,Enable - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 137
the HP StorageWorks XP24000/XP20000 LUN Manager User Guide for the meaning of host mode options. Num. of Host Groups The number of host groups that the host mode setting is changed. Set IP Address Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set IP Address,SVP&DKC,Normal end - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 138
SVP details are provided in the format described below. IPv4 (IP Address: IP address, Subnet Mask: Subnet Mask) IPv6 (IP Address: IP Address, Subnet Prefix: Subnet Prefix) Set Security Switch Operation user operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 139
port blocks in the channel adapter. The number of channel adapters that the mode is changed. Set Subsystem Time Operation Example 1 (The case of TOD Change) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Set Subsystem Time,TOD Change, Normal end,,,Seq.=xxxxx +Time=YYYY/MM/DD HH - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 140
Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],System Option,,Normal end,,,Seq.=xxxxx +Spare Disk Recover=Full Speed +Disk Copy Pace=Slower +Copy Operation(Correction Copy)=OFF +Copy Operation(Dynamic Sparing)=OFF +Read Configuration Data Mode=OFF +Power Lost Mode=Destage - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 141
OFF: Do not execute Dynamic Sparing Read Configuration The method to allocate the serial number reported by Read Configuration Data command. Data Mode ON: Method supporting 4096, OFF: Traditional compatible method Power Lost Mode The operation when power supply is lost. Memory Backup Mode: Set - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 142
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],System Tuning,,Normal end,,,Seq.=xxxxx +Serial No.=64040 +IP Address Mode=Based on Serial Number +IP Address=126.132.248 +Subnet Mask=255.0.0 +WDCP=ON +DDUMP=ON +Power Supply Type=3-phase AC Box(40A) +{DKU,AC-BOX}=[{DKU-R1,1-phase AC Box - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 143
DKA) transfer rate. The number of Disk Adapters (DKA). The LDKC number and the CU number. The LDEV number. The subsystem ID. The number of subsystem IDs. Uninstall Operation Example 1 (uninstalling a CHA) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.=xxxxx +{CHA - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 144
Num. of SMMs=2 +{Battery,Define}=[{BATTERY-14,Install},{BATTERY-24,Install},{BATTERY-15,Install}, {BATTERY-25,Install}],Num. of Batteries=4 [Install] Install function Uninstall Uninstall operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 145
. Install: Install battery, Uninstall: Uninstall battery. Num. of Batteries The number of batteries. NOTE: Only the changed items will be output. Example 4 (uninstalling a shared memory module) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.=xxxxx +{SM,Slot - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 146
The number of additional cluster power supplies. Power Supplies Example 6 (uninstalling a battery) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Install],Uninstall,,Normal end,,,Seq.=xxxxx +Power Lost Mode=Memory Backup Mode +Battery=[BATTERY-UR00,BATTERY-UR01,BATTERY-UR02,BATTERY-UR03],Num - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 147
to Memory Backup Mode Destage Mode: Set to Destage Mode Battery Num. of Batteries The mounting location of the battery The number of batteries. Update Config Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,GMT,[Install],Update Config,,Normal end,,,Seq.=xxxxx +{New Ver.,Old Ver.}={xx-xx-xx/xx,xx - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 148
, as shown in Table 165 (page 148). Table 165 Volume to Space Operation Item PG LDKC:CU:LDEV Num. of LDEVs Description The parity group number. The LDKC number, the CU number and LDEV number. The number of LDEVs. 148 Install Function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 149
was only requested, but not finished. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LDEV],Volume-Format,,Normal end,,,Seq.=xxxxx +LDKC:CU:LDEV=[0x00: Volume-Format Volume-Format operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 150
only requested, but not finished. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LDEV],Volume-Format(H),,Normal end,,,Seq.=xxxxx +LDKC:CU:LDEV=[0x00 LDKC:CU:LDEV Num. of LDEVs Description The LDKC number, the CU number, and LDEV number The number of LDEVs being set NOTE: The status does not change - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 151
number The number of LDEVs being set NOTE: The status does not change immediately after you execute an LDEV operation command. As a result, errors may occur after you execute the command. Volume-Restore(N) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LDEV],Volume-Restore(N),,Normal end - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 152
added. The name of the host group newly added. The number of host groups added. Add Logical Unit (LU) Path Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Add LU Path,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,LUN,LDKC:CU:LDEV}=[{XX,0xXXX,XX,0xXX:0xXX:0xXX},{XX,0xXXX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 153
logical volume linked to the host group The number of LU paths set Add World Wide Name (WWN) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Add WWN,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,WWN,Nickname }=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX,XXXXXXXXXXXXXXXX}, {XX,0xXXX,0xXXXXXXXXXXXXXXXX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 154
World Wide Name operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 Num. of WWNs The number of host bus adapters (WWN) where the settings have been changed. Delete Disk Controller (DKC) World Wide Name (WWN) Operation user-name,xx,YYYY/MM - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 155
deleted or initialized was created. The host group number deleted or initialized. The number of host groups deleted or initialized. Delete Logical Unit (LU) Path Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Delete LU Path,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,LUN}=[{XX,0xXXX,XX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 156
. Indicates LUN where the LU path assignment is cancelled. The number of LU paths deleted. Delete World Wide Name (WWN) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [LUNM],Delete WWN,,Normal end,,,Seq.=xxxxx +{Port,HostGrpID,WWN}=[{XX,0xXXX,0xXXXXXXXXXXXXXXXX},{XX,0xXXX,0xXXXXXXXXXXXXXXXX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 157
Auto is set for the host speed, Auto is output. The number of ports where the host speed is set. Set Command Device (CommandDev) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set CommandDev,,Normal end,,,Seq.=xxxxx +{LDKC:CU:LDEV,CommandDev}=[{0xXX:0xXX:0xXX,Disable},{0xXX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 158
Set FCSP Host operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 or Delete. Num. of Info The number of added, changed or deleted user names. Set Fibre-Channel Security Protocol (FCSP) Port Info Operation user-name,xx,YYYY/MM/DD,HH:MM - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 159
allowed before port authentication is rejected. The number of ports where authentication parameter has been set. Set Fibre-Channel Security Protocol (FCSP) Port Switch Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[LUNM],Set FCSP Port Switch,,Normal end, Seq=xxxxx +{Port,Switch,DH Group,Auth - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 160
name of the host group. The number of host groups where authentication parameter has been set. Set Fibre Address Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUNM],Set Fibre Address,,Normal end,,,Seq.=xxxxx +{Port,Fibre Addr.}=[{XX,1},{XX,126}],Num.of Ports=2 [LUNM] LUN Manager function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 161
the address has been changed. The address of Fibre Channel port after change using a number from 1 to 126. See Table 188 (page 161) for relation of number and Fibre Channel port address. Num. of Ports The number of ports where address has been changed. Table 188 Output Values to Detailed Info and - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 162
Set Fibre Topology operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to to-P is selected Num. of Ports The number of ports where the topology of Fibre Channel is changed. Set Host Mode Operation user-name,xx,YYYY/MM/DD,HH:MM:SS. - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 163
port where the host group is created. The host group number. The host mode set. See the HP StorageWorks XP24000/XP20000 LUN Manager User Guide for the meaning of the host mode number. The host mode option set. 96 host mode options from 0 to 95 are configured, and then are output in units of 32. See - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 164
" are set. Set Security Switch Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[LUNM],Set Security Switch,,Normal end,Seq.=xxxxx +{Port,Switch}=[{XX,Disable},{XX Set Security Switch operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 165
0xXX:0xXX,12345},{0xXX:0xXX:0xXX,}], Num. of UUIDs=3 [LUNM] LUN Manager function Set UUID Set UUID (User Definable LUN ID) operation Normal end The operation has ended normally Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Set Speed Mode Operation 165 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 166
Detailed information displays for this operation, as shown in Table 196 (page 166). Table 196 Set UUID Operation Item LDKC:CU:LDEV UUID Num. of UUIDs Description The LDKC number, CU number, and LDEV number User Definable LUN ID The number of UUIDs configured 166 LUNM Function - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 167
indicated at the beginning represents the LDKC, CU and LDEV numbers of the top LDEV. Num. of LUSEs The number of LUSE volumes configured Release LUSE Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[LUSE],Release LUSE,,Normal end,,,Seq.=xxxxx +LUSE(LDKC:CU:LDEV)=[0x00:0x00:0x00,0x00:0x01 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 168
of the PCB (CHA, Disk Adapter (DKA, CM, SM, CSW, MIX or BASE) to be blocked. The number of PCBs to be blocked. number. The number of parity groups. The LDEV number. The number of LDEVs. Correction Copy Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Correction Copy,,Normal end - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 169
Drive Interrupt operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information ( finished. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Format,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 (for an external volume) - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 170
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Format Stop,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +PG=[E1-1],Num. of PGs=1 (for an external . of LDEVs Description The parity group number. The number of parity groups. The LDEV number. The number of LDEVs. Pre Quick Format Stop - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 171
of parity groups. The LDEV number. The number of LDEVs. Quick Format Operation The logged information indicates that the Quick Format operation was only requested, but not finished. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Quick Format,,Normal end,,, Seq.=xxxxx +PG=[1-1],Num. of - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 172
-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance], Replace,Easy-Replace,Normal end,Seq.=xxxxx +PDEV={HDDR03-01},Num. of PDEV=1 Example 6 (replacing a fibre switch) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance], Replace,,Normal end,,,Seq.=xxxxx +FSW=[FSWR04-LL,FSWR05-LL],Num. of FSWs - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 173
-xx, ACBOX-x, FAN-xx, TH-xx, SSVP/MN, SVP, HDDFANxx-x, BATTERY-Uxxx, BATREG-x, FUSE-xxx, ACBOX-Uxxx, DKUPS-xxx, SVRxxx-x, SVRxxx-Ex, EXTADP, BATTERY-SBx, SBADP, or LEDPNLxx-x) specified to be replaced. The port where SFPs are inserted. The number of inserted SFPs. The mounting location of the PCB - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 174
of the PDEV. Size Change Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Size Change,,Normal end,,,Seq.=xxxxx +PCB=[CACHE-2CB],Num. of PCBs=1 +SIZE=4096 +{Battery,Define}=[{BATTERY-12/BATTERY-22,Install}],Num. of Battery Pairs=1 [Maintenance] Maintenance function Size Change - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 175
uninstalled. Install: Installation of a battery, Uninstall: Uninstallation of a battery Num. of Battery Pairs The number of batteries to be installed or uninstalled. Spare Disk Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Spare Disk,,Normal end,,,Seq.=xxxxx +PDEV=HDD00-01 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 176
2 (changing the Disk Adapter (DKA) type) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance], Type Change,,Normal end,Seq.=xxxxx +PCB=[DKA PCBs The number of inserted Small Form-Factor Pluggables (SFPs). The mounting location of the PCB to be replaced. The number of PCBs to be replaced. 176 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 177
of parity groups. The LDEV number. The number of LDEVs. Verify Stop Operation This log information is output when the format process is suspended. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Maintenance],Verify Stop,,Normal end,,,Seq.=xxxxx +PG=[1-1],Num. of PGs=1 +LDEV=[0x00:0x03:0x2f],Num. of - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 178
Function Release Cache/CLPR Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[OND],Release Cache/CLPR,,Normal end,,,Seq.=xxxxx +Cache(MB Cache/CLPR Release Cache/CLPRoperation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 179
.=xxxxx [Perf Ctrl] XP Performance Control (Perf Ctrl) function Clear PPC Info Clear PPC Info operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Default Set Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 180
217 (page 180). Table 217 Parameters for Default Set Operation Parameter Port WWN Description The end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295). XP Performance Control Group (PerfCtrlGrp) Delete/Change (Del/Chg) Operation user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 181
when the All Thresholds value is set. Set All Priority (Prio) WWN Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set All Prio WWN,,Normal end,,,Seq.=xxxxx +{AllPriority,Threshold,Mode}={Enable,XXXXXXXX,IOPS} [Perf Ctrl] XP Performance Control (Perf Ctrl) function Set All Prio WWN - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 182
Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295). Set Priority (Prio) Port Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set Prio Port,,Normal end,,, Seq.=xxxxx +{Port,Priority,Use,Threshold/Upper Limit,Mode}=[{1A,Non-Prio, Enable,XXXXXXXX,IOPS},{3A,Prio - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 183
channel type of path interface. Indicates number of ports that the setting is changed. Set Priority (Prio) WWN Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Set Prio WWN,,Normal end,,, Seq.=xxxxx +{WWN,Priority,Upper Limit,Mode}=[{0xXXXXXXXXXXXXXXXX, Non-Prio,XXXXXXXX,IOPS - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 184
control. IOPS: I/O rate, KB/s: Transfer rate. This value is not output when the attribute is set to prioritized WWN. Num. of WWNs WWN The number of number in the hexadecimal format. Update Port WWN Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Update Port WWN,,Normal end,,, - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 185
. Mode The type of rate used for the upper limit control. IOPS: I/O rate, KB/s: Transfer rate. This value is output only number of Perf Ctrl groups that the setting is changed. Update World Wide Name (WWN) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Ctrl],Update WWN,,Normal end - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 186
adapter. Change Nickname: Change of Perf Ctrl name of the host bus adapter WWN Indicates WWN of the host bus adapter. WWN is a 16-digit number in the hexadecimal format. When the host bus adapter is changed, the WWN of the host bus adapter before change is output. Change PPC Name - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 187
and the gathering interval is set as XX sec. Monitoring is disabled. Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295). Monitoring Switch (S/W) & CU Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Perf Mon], Monitoring - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 188
Port Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PORT],Change Port,,Normal end,,,Seq.=xxxxx +Attribute=RCU Target ++Port=[1E,3E,5E,7E], Num.of Ports=4 [PORT] PORT function Change Port Change Port operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 189
:00,[PP KEY],PP Apply,,Normal end,,,Seq.=xxxxx [PP KEY] Optional Product License Key function PP Apply PP Apply operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) PP Available Install Operation user-name,xx,YYYY/MM/DD,HH - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 190
checking the disabled option. The number of the disabled options. PP Enable chk Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PP KEY],PP Enable chk,,Normal end,,,Seq.=xxxxx +{P.P.Name,Result}=[{JAVA API,Normal end}],Num. of PPs=1 [PP KEY] Optional Product License Key function PP Enable chk - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 191
in the installation. The number of the installed options. PP Uninstall chk Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[PP KEY], PP Uninstall chk,,Normal end,,,Seq.=xxxxx +P.P.Name,Result}=[{JAVA API,Normal end}],Num. of PPs=1 [PP KEY] Optional Product License Key function PP Uninstall - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 192
The number of the uninstalled options. SLPR PP Change Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[PP KEY],SLPR PP Change,,Normal end,,,Seq.=xxxxx Product License Key function SLPR PP Change SLPR PP Change operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 193
number of port pairs set. Add RCU Operation Example 1 (CU Free is used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Add RCU,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID,Min.Path,MIH Time(s), Round Trip Time(ms),Incident,FREEZE}={99999,0x00,0x00,Default,4,08 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 194
, Default is output. The controller ID of the registered RCU device. The CU number of the connected CU. The CU number of the paired CU. The SSID of the registered RCU. The port number of MCU. The port number of the registered RCU. The number of set minimum paths. The value of set RIO MIH (Remote - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 195
Min.Path The minimum number of paths after change. MIH Time(s) The value of RIO MIH (Remote Path Operation Example 1 (CU Free is used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete Path,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 196
of MCU. The port number of RCU. The number of path pairs deleted. Delete RCU Operation Example 1 (CU Free is used) user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[RCU],Delete RCU,,Normal end,,,Seq.=xxxxx +{S/N,MCU LDKC,RCU LDKC,Path Gr.ID,Controller ID}={99999,0x00,0x00,Default,5} Example 2 (CU Free - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 197
ID Controller ID MCU SSID Description The serial number of the device of RCU deleted. The LDKC number of the connected LDKC. The LDKC number of the paired LDKC. The path group ID of the RCU deleted. When the path group ID is a default setting, Default is output. The controller ID of the RCU deleted - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 198
Volume Shredder function End Shredding End Shredding operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log was only requested, but not finished. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Shredder],Set Shredding,,Normal end,,,Seq.=xxxxx +OwnerID=0 +{Data,Output - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 199
.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in Table 244 (page 199). Table 244 Suspend Shredding Operation Item Target OwnerID Description The owner ID. 0: Indicates Remote Web Console 0xXX - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 200
of the target volume in the created pair Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of created pairs Change Reserve Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[SI],Change Reserve - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 201
of CT group, Delete: deletion of CT group Result The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of CTGs The number of CT groups registered or deleted. Delete Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SI - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 202
.=xxxxx [SI] ShadowImage for Mainframe function (for the IBM z/OS) Initialize Initialize operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SI],Option,,Normal - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 203
of Reserve 32. Resync Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SI],Resync Pair,,Normal end,,,Seq.=xxxxx +Copy pace=Faster,Resync Resync Pair Resync Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 204
of the target volume in the split pair Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of split pairs Suspend Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[SI],Suspend Pair,,Normal - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 205
pair T-VOL(LDKC:CU:LDEV) The LDKC, CU, and LDEV numbers of the target volume in the suspended pair Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of suspended pairs Suspend Pair Operation 205 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 206
0xCC,0xDD:0xEE:0xFF,01,Error(xxxx-yyyy)}],Num. of Pairs=2 [Snapshot] HP XP Snapshot function Pairsplit-S Pairsplit-S operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 207
36 SNMP Function Set SNMP Agent Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[SNMP],Set SNMP Agent,,Normal end,,,Seq.=xxxxx +Install=Disable +Manager=[(158.214 Set SNMP Agent operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 208
Add CTG Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Add CTG,,Normal end,,,Seq.=xxxxxx +{LDKC,CTG,Path,Offloading(min.),Inflow Control 255 Add CTG Operation Item LDKC CTG Path Description The LDKC number. The consistency group number of the consistency group (CT group) newly - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 209
number of the volume specified to the remote volume when the pair is created The serial number of the device The LDKC number error level set (handling if trouble occurs). This value is output end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 210
user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[TC],Change Async Option,,Normal end,,,Seq.=xxxxxx +{CLPR,Rate(%)}={00,050} [TC] TrueCopy for Mainframe function (for IBM z/OS) Change Async Option Change Async Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 211
Option Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC],Change Option,,Normal end,,,Seq.=xxxxxx +{ Parallel Initial Copy,Path Blockade Watch(s),Path Blockade SIM Watch(s), Service SIM, Parallel Initial Copy(CU)}={128,45,70,Not Report,Disable} +{LDKC,CU,Service SIM,PPRC Support,SCP Time - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 212
To R-VOL: Copy to main and remote volume is enabled Error Level The error level changed (handling if trouble occurs) This value is output when end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of changed pairs Clear SIM Operation user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 213
TrueCopy for Mainframe function (for IBM z/OS) Clear SIM Clear Service Information Message (SIM) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Delete Cmd.Dev Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[TC - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 214
LDEV number of the paired volume in the deleted pair The volume type of the connected volume M-VOL: Main volume, R-VOL: Remote volume Mode end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of deleted pairs Function Switch Operation user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 215
are off. Resume Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[TC],Resume Pair,,Normal end,,,Seq.=xxxxxx +{M-VOL(LDKC:CU: Level Description The LDKC, CU, and LDEV numbers of the main volume in the restored pair The LDEV number of the remote volume in the restored pair The fence level - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 216
Item Error Level Description The error level set (handling if trouble occurs) This value is output when the asynchronous pair is Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of restored pairs Script Operation user-name, - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 217
Suspend Pair Suspend Pair operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to The LDEV number of the paired volume in the split (suspended) pair The volume type of the connected volume M-VOL: Main volume, R-VOL: Remote volume The SSB - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 218
initial copy, Delta: execute paircreate operation for Delta resync M-JNLG R-JNLG Path Gr.ID Error Level CFW The master journal group number The restore journal group number The path group ID (Default fixed) set for the storage system The error level: Group: Group level, Volume: Volume level - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 219
Replicator for Mainframe function (for IBM z/OS) Clear-SIM Clear-Service Information Message (SIM) operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Delete-Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UR - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 220
Normal: Normal mode, Force: Force mode Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs Edit-EXCTG (Extended Consistency Group) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[UR - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 221
numbers of the remote command device The result of the operation Normal end: normal end, Error(xxxx-yyyyy): abnormal end xxxx: part code, yyyyy: error code Num. of EXCTGs The number of extended consistency groups for which the configuration has been changed Journal-Option Operation user The path - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 222
Description Forward Path Watch Indicates whether to transfer the path blockade watch end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of JNL Grps The number of journal groups. Journal-Vol Operation (with Add Parameter) Example 1 (adding journal volumes) user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 223
numbers The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of JNL Grps The number of journal groups Journal-Vol Operation (with Group-Delete Parameter) user Vol Operation Parameter Group-Delete Remove-JNLG (Force) Description - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 224
is enabled. Copy To R-VOL: Copy to the main and remote volume is enabled. Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs R-Cmd.Dev. Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 225
command device as a parameter • When releasing a remote command device Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Mirrors The number of mirrors changed Resume-Pair Operation user-name,xx,YYYY/MM/DD,HH:MM:SS - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 226
is output for CU and LDEV numbers. MirrorID S/N CTRLID The mirror ID The serial number of the logical device (storage system) The controller ID N/A end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs Suspend-Pair Operation user- - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 227
CU and LDEV numbers when the Type is P-VOL. MirrorID S/N CTRLID The mirror ID The serial number of the logical device (storage system) The end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Pairs The number of pairs System-Option Operation user - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 228
in Table 282 (page 228). Table 282 System-Option Operation Item Description Max Initial Copy The number of volumes you can copy at a time during an initial copy operation. LDKC:CU The LDKC and CU numbers. Change SIM Report Whether to report SIM to the host or not. Report. Not report. Num - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 229
whose first letter is E indicates that an external volume is present in the parity group. LDKC:CU:LDEV Start LBA The LDKC, CU, and LDEV numbers The start LBA A hyphen (-) is output when not specified. Emulation Size Unit The emulation type The user-specified capacity The unit of the CV capacity - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 230
Disk Description Indicates system disk status Enable: Enabled, Disable: Disabled Num. of LDEVs The number of LDEVs Make Volume Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Make Volume,,Normal end number The parity group number whose first letter is E indicates that an external - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 231
CU:LDEV Num. of SSIDs The LDKC, CU, and LDEV numbers The number of SSID System Disk Options Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],System Disk Options,,Normal end,,,Seq.=xxxxx +{Option,Set,Result}=[{Additional configuration Back up,Enable,Normal}],Num. of Modes=1 [VLL] Virtual - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 232
end, Error: Abnormal end The number of system disk options. Volume Initialize Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VLL],Volume Initialize,,Normal end PG The parity group numbers The parity group number whose first letter is E indicates that an external volume is present in - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 233
to Space Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VLL],Volume to Space,,Normal end,,,Seq.=xxxxxx +{PG Space Operation Item Description PG The parity group number The parity group number whose first letter is E indicates that an external volume is present in the parity group. LDKC - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 234
VM], Create Auto Plan,,Normal end,,,Seq.=xxxxx [Auto LUN] HP XP Auto LUN Software function Create Auto Plan Log Create Auto Plan Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Del Auto Plan Log Operation user-name,xx,YYYY/MM/DD - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 235
number of settings. 1 is always output. Del Migration Log Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN],Del Migration Log,,Normal end,,,Seq.=xxxxxx [Auto LUN] HP The executed operation. Default: The default auto migration plan is applied (click the Default button, and then click - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 236
the first to 96th. Num. of Data The number of setting. 1 is always output. Set Class Threshold Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, HP XP Auto LUN Software function Set Class Threshold Set Class Threshold operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 237
. For information on using XP Auto LUN, see the HP StorageWorks XP24000/XP20000 Auto LUN Software User Guide. user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN],Set Migration Vol,,Normal end,,,Seq.=xxxxxx +{Instruction,SourceLDEV,TargetLDEV,OwnerID,Result}=[{Create,0x00:0x00:0x00,0x00: 0x00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 238
ID of the program product is output. The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end, Not Execute: Not executed xxxx: Part code, yyyyy: Error code Num. of LDEVs The number of manual migration plans set and deleted. Set Plan Condition Operation user-name,xx,YYYY/MM - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 239
migrated in a same time is displayed by the number from 1 to 40. Num. of Data The number of settings. 1 is always output. Set Reserved Vol Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[Auto LUN],Set Reserved Vol,,Normal end,,,Seq.=xxxxxx +{Set,LDKC:CU:LDEV,Result}=[{Reserved,0x00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 240
, 0x82: Read Only attribute Result The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of LDEVs The number of logical volumes to which the access attribute is set VTOC Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 241
Operation Item LDKC:CU:LDEV VTOC(Trk) Result Description The LDKC, CU, and LDEV numbers The VTOC size of the specified LDEV is indicated by the number of tracks. The result of operation Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of LDEVs The - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 242
VSEC Function Set Group Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VSEC],Set Group,,Normal end,,,Seq.=xxxxxx +LDKC=0x00 Security function Set Group Set Group operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 243
the security group can be used as a secondary volume in the remote copy destination. Enable: Used as secondary volume, Disable: Not The model number of the host. The node ID of the host. The logical partition number of the host. The manufacturer of the host. CNT(EX): Channel extender, HTC: HP, IBM: - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 244
the created V-VOLs indicated by blocks The SSID The number of V-VOLs created The number of V-VOL groups created Add V-Vol (THP) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL],Add V-Vol (THP),,Normal end,,,Seq.=xxxxx +{V-VolGroup,Capa(blocks),CLPR,Emulation,Result}={X1-1,1,4294967296 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 245
of the created V-VOLs indicated by blocks The SSID The number of V-VOLs created The number of V-VOL groups created Asso V-VOL/Rel Pool Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL], Asso V-VOL/Rel Pool,,Normal end,Seq.=xxxxx +{Command,LDKC:CU:LDEV,Pool ID,Warn Threshold - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 246
warn threshold is changed. Num. of VOLs The number of THP volumes that have been operated. Delete V-Vol (Snapshot) Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, (Snapshot) operation for HP XP Snapshot Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information ( - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 247
deleted V-VOL group indicated in the format of "V-Vol group number-1". The result of operation. Normal end: Normal end, Error(xxxx-yyyyy): Abnormal end xxxx: Part code, yyyyy: Error code Num. of Group The number of V-VOL groups deleted. Emulation Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 248
path definition, from Open V to Open 0V. (Forceful mode) Pool Change/Delete Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx,00:00,[VVOL],Pool Change/Delete,,Normal end changed or the number of the pool that have information is changed. 1: HP XP Snapshot, 2: HP XP Thin Provisioning Software - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 249
. of Pools The number of the restored pool. Pool SIM Comp Req Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL], Pool SIM Comp Req,,Normal end,,,Seq.=xxxxx +SIM=[0x600000,0x600001,0x60000F],Num. of SIMs=3 [VVOL] V Volume function Pool SIM Comp Req Pool Service Information Message (SIM - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 250
Service Information Message (SIM) generated in the storage system with resolved errors or service number of SIMs with resolved errors and service request status. Set Pool Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[VVOL], Set Pool,,Normal end output. 1: HP XP Snapshot, 2: HP XP Thin - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 251
, 10,Enable ,Enable }],Num. of CLPRs=32 [XRC] XRC function Set XRC Option Set XRC Option operation Normal end The operation has ended normally. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information Detailed information displays for this operation, as shown in - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 252
,from=xxxxxxxxxxxxxx,, Seq.=xxxxx FC-SP FC-SP operation Normal end The commands have ended normally. from=xxxxxxxxxxxxxx WWN of the host that sent the command. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) M/F I/F - Interface Name user-name,xx,YYYY/MM/DD HH:MM:SS.xxx,00 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 253
that is being used internally by the host which sent the command and the storage system. Seq.=xxxxxx Sequence number of log information (0000000000 to 4294967295) Detailed Information The commands and the parameters that the storage system received from the host are output. The meaning of the output - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 254
Seq.=xxxxx [ENC] ENC function Enc. Key Backup Encryption Key Backup operation Normal end The operation has ended normally. Seq.=xxxxxx Log information serial number (0000000000 to 4294967295) Encryption (ENC) Function - Enc. Key Restore Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,[ENC],Enc - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 255
Seq.=xxxxx [Install] Install function Set Encryption Key Set Encryption Key operation Normal end The operation has ended normally. Seq.=xxxxxx Log information serial number (0000000000 to 4294967295) PINDeletion Function - Delete Operation user-name,xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00, [PINDeletion - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 256
operation, as shown in " Delete Operation" (page 256). Table 314 Delete Operation Index LDKC:CU:LDEV Num. of LDEVs Description The LDKC, CU, and LDEV numbers. The number of set LDEVs. 256 Audit Log Information about the Key Used for the Encryption License Key - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 257
StorageWorks XP24000/XP20000 Disk Array Owner Guide • HP StorageWorks XP24000/XP20000 LUN Manager User Guide • HP StorageWorks XP24000/XP20000 Remote Web Console User Guide You can find these documents on the HP Manuals website: http://www.hp.com/support/manuals In the Storage section, click Storage - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 258
, firmware updates, and other product resources. HP Websites For additional information, see the following HP websites: • http://www.hp.com • http://www.hp.com/go/storage • http://www.hp.com/support/manuals • http://www.hp.com/storage/spock Documentation Feedback HP welcomes your feedback. To make - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 259
Remote Login Web Console functions Audit Log Information File Output Function Name Operation Name BASE Login Note The IP address of the web client is output as the parameter. When * is output at the end Set Up HTTP Block Storage Device Add -- Storage Device Del Storage Device Edit Table 316 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 260
Group Paste (Host Group) Erase WWN "Drag & Drop" WWN node Paste (LU Path) Set UUID Standard Mode High Speed Fibre Addr. Fabric Connection Host Speed Set Port Information Default Setting (User Name / Secret) Register Authentication Information Clear Authentication Information Set Security Switch Add - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 261
Table 316 Output of Audit Log Information File and Operations (continued) Option Operation Launching Menu Tab Operation Authentication (Host Group): Disable -> Enable Output of Audit Log Information File Function Name Operation Name Set FCSP Target2, 4 Authentication (Host Group): Enable -> - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 262
Function Name Operation Name Shredder Set Shredding/ End Shredding NOTE: Set Shredding is output when shredding started. End Shredding is output when shredding ended. Pool V-VOL Suspend Encryption settings for ENC Parity Group System Disk Options VLL New Pool VVOL Change Pool Information - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 263
Monitoring S/W Monitoring S/W & CU XP Auto LUN8 Manual Plan Auto Plan Attribute History Server Priority Port Manager / Threshold / Upper) Initialize Delete ports if CHA) is removed Monitoring S/W Monitoring S/W & CU Set Migration Vol2, 4 Set All Prio Port Default Set2, 4 Clear PPC Info4 263 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 264
Update Port WWN2, 4 Port-WWN Delete Update Port WWN2, 4 HP XP Continuous Access Pair Operation Initialize Delete ports if CHA) is removed Paircreate (CA) CA Paircreate (ESAM) Pairsplit-S (CA) Pairsplit-S (ESAM) ESAM CA ESAM Default Set4 Clear PPC Info4 Paircreate2 Paircreate2 Pairsplit-S2 - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 265
Disk Operation RCU Operation Asynchronous Operation System Option HP Disk ID ESAM Add Quorum Disk ID Delete Quorum Disk ID Add RCU RCU Change RCU Option Delete RCU Add Path Delete Path Pairsplit-S Assign Remote Command Device Release Remote Command Device Del Quorum Disk ID Add RCU - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 266
Controller RCU Operation (DKC) Add RCU Change Disk Controller (DKC) Option Change RCU Option Delete Disk Controller (DKC) Add Path Delete Path Delete RCU Add Path2, 4 Delete Path2, 4 Pair Operation Optional Operation HP XP Business Copy Pair Operation Port Change (Target, PORT Initiator - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 267
Option Change RCU Option Delete RCU Add Path Delete Path Delete RCU Add Path2, 4 Delete Remove JNLG from EXCTG (Force) Assign Remote Command Device Release Remote Command Device Disk Controller (DKC) Add Disk Controller RCU Operation (DKC) Change Disk Controller (DKC) Option Delete Disk - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 268
Delete Path Function Name Operation Name Add Path2, 4 Delete Path2, 4 Port Change (Target, PORT Initiator, RCU Target) Add Pair UR Suspend Pair Resume Pair Delete Pair Change Pair Option Change System Option Change SIM Report Clear SIM Add JNLG to EXCTG, Remove JNLG from EXCTG Change - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 269
Set XRC Option Attribute2 HP XP External Storage Volume Operation Expiration-Lock Add Volume Delete Volume Alternate Path (ADD / Delete / Priority UP / Priority Down) Ext Stor Expiration-Lock2 AddVolume(FIBRE)2 DeleteVolume(FIBRE)2 ChangePaths(FIBRE)2 Configuration File Loader Port Operation - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 270
Environmental Setting LicenseKey SNMP Information Email Information HP XP Disk/Cache Partition On-Demand Partition Definition Output OND Release Cache/CLPR Apply DCPart Set (Create Storage Logical Partition (SLPR) / Delete Storage Logical Partition (SLPR) / Create Cache Logical Partition - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 271
log information: ◦ Changing host mode ◦ Changing Host Group ◦ Adding or deleting paths ◦ Adding, changing, or deleting WWN 2 When you apply two or more end, no matter when you perform the Cache Residency Manager operation. 8 For information on using XP Auto LUN Software, contact HP Technical Support - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 272
Table 317 LUN Manager Operation and Priority of Audit Log Output (continued) Operation Change Target of Operation Host Group WWN Host Group WWN Changing Host Mode Command Device Command Dev. Security LUN Security Priority 3 3 3 3 3 4 4 OFF: 3 ON: 1 272 Audit Log Information File Output by - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 273
SVP start button Maintenance Install Output of Audit Log File Function Operation Function Name Operation Name Maintenance Replace Maintenance Replace Blockade Recover Switch SVP Switch SVP Transfer Config Transfer Config Define Configuration Define Configuration Install and Install - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 274
Name Operation Name Add LU Path Delete LU Path Set Speed Mode Set Host Mode Set Security Switch Add WWN Delete WWN Change WWN Add Host Group Delete Host Group Change Host Group Delete DKC WWN Force Reset Make LUSE Release LUSE DCR Configuration DCR Prestaging M/F DCR Open DCR - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 275
Log File (continued) GUI operation SVP start button Information Output of Audit Log File Function Operation Function Name Operation Name Initialize ORM Value Initialize ORM Value Initialize ORM Value Setting Battery Life Setting Battery Life Set Battery Life Set Machine Install Date Set - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 276
operation Audit Log Information File Output Function Name Operation Name CFL Extension CflSet Start CflSet End Note Logs of operations performed by CFLSET command are output between CflSet Start and CflSet End. For details on the logs, see "Audit Log Information File Output by Function" (page - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 277
Disk controller. Disk cabinet unit. The array cabinet that houses the physical disks. External consistency group. Fibre Channel. A network technology primarily used for storage number. LUN Manager. Logical Unit Size Expansion. The LUSE feature is available when the HP StorageWorks LUN Manager product - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 278
pluggable. Hitachi ShadowImage. Also known as HP StorageWorks XP Business Copy. Service information message. Storage logical partition. Shared memory. Simplex. Subsystem identifier; storage system identifier. Service processor. A computer built into a disk array. The SVP, used only by an HP service - HP XP20000/XP24000 | HP StorageWorks XP24000/XP20000 Audit Log Reference Guide ( - Page 279
VSEC VTOC VVOL W WWN Z z/OS Target volume. Terabyte. Equivalent to 1,000 Gb for data storage and statistics, or 1,024 Gb for memory. TrueCopy. Hitachi Universal Replicator. Also known as HP XP Continuous Access Journal (Cnt Acc-J). Universal Time. A modern time system related to the conventional
HP StorageWorks
XP24000/XP20000 Audit Log User and
Reference Guide
Abstract
This document describes the system logs generated by XP Remote Web Console and SVP operations. Topics include how to
view and redirect log output. The intended audience is a storage administrator or authorized service provider with independent
knowledge of HP StorageWorks XP storage systems and XP software.
HP Part Number: AE131-96085
Published: May 2011
Edition: Twelfth