HP XP20000/XP24000 HP StorageWorks XP Disk Array Configuration Guide: Novell N
HP XP20000/XP24000 Manual
View all HP XP20000/XP24000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP XP20000/XP24000 manual content summary:
- HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 1
HP StorageWorks XP Disk Array Configuration Guide: Novell NetWare HP XP24000 Disk Array nl HP XP20000 Disk Array nl HP XP12000 Disk Array nl HP XP10000 Disk Array nl Abstract This guide provides requirements and procedures for connecting an XP disk array or SVS 200 to a host system, and for - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 2
Hewlett-Packard Development Company, L.P. Confidential computer software. Valid license from HP required HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 3
Helpful Multipath commands 22 Configuring NetWare 6.x servers for Cluster Services 23 Installing Cluster Services 23 Creating logical volumes 24 3 Troubleshooting 27 Error conditions ...27 4 Support and other resources 29 Contacting HP ...29 XP Disk Array Configuration Guide: Novell NetWare 3 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 4
Subscription service ...29 Related information ...29 HP websites ...29 Conventions for storage capacity values 30 HP product documentation survey 30 A Path worksheet 31 Worksheet ...31 Worksheet ...31 B Disk array supported emulations 33 Supported emulations ...33 Emulation specifications ...33 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 5
Figures 1 SNMP configuration 9 2 Point-to-point fabric topology example 13 3 Multi-cluster environment 14 XP Disk Array Configuration Guide: Novell NetWare 5 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 6
Tables 1 Fabric topology settings 13 2 Fabric zoning and LUN security settings 15 3 Error conditions ...27 4 Path worksheet ...31 5 Supported emulations 33 6 Emulation specifications 33 6 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 7
. Refer to the adapter docu- mentation for installation details. • HP StorageWorks XP Remote Web Console or HP StorageWorks P9000 or XP Command View Advanced Edition Software for configuring disk array ports and paths. • HP StorageWorks XP Array Manager. • Check with your HP representative for other - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 8
. SNMP properties are usually set from the SVP but they can also be set remotely using P9000 or XP Command View Advanced Edition Software or XP Remote Web Console. For specific procedures, see the applicable user guide. 8 Installing and configuring Novell NetWare for the XP family of disk arrays - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 9
, use XP Remote Web Console, P9000 or XP Command View Advanced Edition Software, or XP Array Manager to complete the remaining disk array configuration tasks. If you do not have these programs, your HP service representative can perform these tasks for you. XP Disk Array Configuration Guide: Novell - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 10
each host group that is configured on a disk array port to match the host OS. Set the host mode using LUN Manager in XP Remote Web Console(shown) or P9000 or XP Command View Advanced Edition Software. If these are not available, the HP service representative can set the host mode using the SVP. The - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 11
must be set for storage administrator must verify if an additional host group mode is required for the host group. CAUTION: Changing host group modes for ports where servers are already installed and configured is disruptive and requires the server to be rebooted. XP Disk Array Configuration Guide - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 12
HP representative if you install storage agnostic software (such as backup or cluster software) that may require specific settings. Configuring the Fibre Channel ports Configure the disk array Fibre Channel ports by using P9000 or XP Command View Advanced Edition Software or XP Remote Web Console - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 13
and configure Fibre Channel adapters (FCAs) that connect the host to the disk array. Loading the operating system and software Follow the manufacturer's instructions to load the operating system and software onto the host. Load all OS patches and configuration utilities supported by HP and the FCA - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 14
tool called ConsoleOne to work in a storage environment. ConsoleOne is a free Java volume quota to grow to pool size. 10. Leave the default settings on the next page and click Finish. Clustering and fabric zoning nodes. The nodes share access to the disk array. Figure 3 Multi-cluster environment . 14 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 15
or cluster nodes connect through a shared port Connecting the disk array The HP service representative performs the following steps to connect the disk array to the host: 1. Verifying operational status of the disk array channel adapters, LDEVs, and paths. 2. Connecting the Fibre Channel cables - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 16
disks in the disk array using the same procedure for configuring any new disk on the host. This includes the following procedures: 1. Creating the disk partition size). If you select manual partitioning, enter a partition size and hot fix area. 8. On the Disk Partition Information screen, verify (or - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 17
console. 2. In the main menu, select Partitions. 3. Press Insert, then select a device where you want to create a partition. 4. Select NSS as the partition type. 5. Enter the size of the partition in bytes (B), kilobytes (KB), megabytes (MB), or gigabytes (GB), and then click OK. XP Disk Array - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 18
- Storage Information screen, select the desired pool/device, enter the desired Volume Quota, and click Next. 5. After you have created the pool, select Activate and Mount in the On Creation box, and then click Finish. 18 Installing and configuring Novell NetWare for the XP family of disk arrays - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 19
- Storage Information window check Activate and Mount in the "On Creation" box, then click Finish. 6. Confirm that the logical volume has been created. 7. Map the created Logical Volume as the Network Drive. 8. Confirm the mapped drive. NetWare 6.5 1. Enter NSSMU at the server console. XP Disk Array - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 20
an existing file onto each new volume. 2. Verify that the file was copied successfully. 20 Installing and configuring Novell NetWare for the XP family of disk arrays - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 21
these products with the disk array, contact your HP service representative for the latest information about support and configuration requirements. For PORTNAMES/CONSOLE LOAD QL2300.HAM SLOT=3 /LUNS /ALLPATHS /PORTNAMES /CONSOLE ######## End HAM Drivers ######## XP Disk Array Configuration Guide: - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 22
-3 rev:HP16 Priority = 0 selected Up 0x1C [V6E0-A3-D0:3] HP OPEN-3 rev:HP16 Priority = 0 Helpful Multipath commands Other useful Multipath commands are described below. MM Set failover priority = This command sets the priority level for each path. The ID must be a valid - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 23
them again based on the current set of failover devices. As a path support.novell.com. Configuring NetWare 6.x servers for Cluster Services Services running on each server in the cluster. • All servers must have a connection to the shared disk array Disk Array Configuration Guide: Novell NetWare 23 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 24
NWDeploy accesses each node. After all services have been accessed and added to the Selection window and click Next. 8. Set up the shared media: Verify that Yes Next. 4. In the Create Logical Volume - Storage Information window, select the desired pool/device, console. 24 Middleware configuration - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 25
click Next. 4. Select the desired pool/device, enter the desired Volume Quota, then click Next. 5. Review and change volume attributes as necessary. 6. Select Create. XP Disk Array Configuration Guide: Novell NetWare 25 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 26
26 Middleware configuration - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 27
. If you are unable to resolve an error condition, ask your HP support representative for assistance. Error conditions Depending on your system configuration, you may be able to view error messages (R-SIMS) as follows: • In XP Remote Web Console (Status tab) • In P9000 or XP Command View Advanced - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 28
and the host hangs. Recommended action Check the FCA and make sure it was installed properly. Reboot the host. Make sure there are no duplicate disk array TIDs and that disk array TIDs do not conflict with any host TIDs. 28 Troubleshooting - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 29
Disk Array: Owner's Guide • HP StorageWorks XP24000/XP20000 Disk Array Owner's Guide • HP StorageWorks XP LUN Manager User's Guide • HP StorageWorks SAN Design Reference Guide You can find these documents on the HP Manuals website: http://www.hp.com/support/manuals In the Storage section, click Disk - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 30
• http://www.hp.com/support/manuals • http://www.hp.com/storage/spock Conventions for storage capacity values HP XP storage systems use the following values to calculate physical storage capacity values (hard disk drives): • 1 KB (kilobyte) = 1,000 (103) bytes • 1 MB (megabyte) = 1,0002 bytes • 1 GB - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 31
: TID: LUN: TID: LUN: TID: LUN: TID: LUN: TID: LUN: TID: LUN: TID: LUN: TID: LUN: TID: LUN: TID: LUN: TID: LUN: TID: LUN: XP Disk Array Configuration Guide: Novell NetWare 31 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 32
32 Path worksheet - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 33
B Disk array supported emulations This appendix provides information about supported emulations and emulation specifications. Some parameters might not be relevant to your array. Consult your HP representative for information about supported configurations for your system. Supported emulations HP - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 34
on the disk array. Note 2: The devices are defined to the host as SCSI disk devices, even though the interface is Fibre Channel. Note 3: The command device (used for RAID Manager) is distinguished by -CM on the product name (for example, OPEN-3-CM, OPEN-3-CVS-CM). 34 Disk array supported emulations - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 35
Note 4: The device capacity can sometimes be changed by the BIOS or host adapter board. This may make actual capacity different from that listed in the table. capacity = 49 MB and n = 4: # of cylinders = 49 × 16/15 × 4 = 52.26 × 4 = 53 × 4 = 212 XP Disk Array Configuration Guide: Novell NetWare 35 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 36
is specified in MB, not number of cylinders. The capacity of an OPEN-V CVS volume can be specified in MB or number of cylinders. You set the volume size using XP Remote Web Console or P9000 or XP Command View Advanced Edition Software. 36 Disk array supported emulations - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 37
the disk array that accepts HP StorageWorks Continuous Access or HP StorageWorks Business Copy control operations which are then executed by the array. Control sets, fabrics or paths, and array controllers. Fibre Channel. A network technology primarily used for storage networks. Fibre Channel Adapter - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 38
Unit Size Expansion. The LUSE feature is available when the HP StorageWorks LUN storage. Open Fibre Control. A general term describing any one of the supported disk array. Remote service information message. Storage area network. A network of storage devices available to one or more servers. Service - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 39
WWN World Wide Name. A unique identifier assigned to a Fibre Channel device. XP Disk Array Configuration Guide: Novell NetWare 39 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 40
40 Glossary - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 41
clustering, 14, 15, 21, 23 configuration cluster services, 23 device, 16 emulation types, 8 disk array, 9 FCAs, 13 Fibre Channel ports, 12 host, 13 host mode, setting, 10 middleware, 21 port, 12 system option mode, 12 contacting HP, 29 conventions storage capacity values, 30 CVS devices, 8 D device - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 42
, disk array, 7 S SCSI disk, Fibre Channel interface and term "SCSI disk", 8 security, LUN, 14, 15 server, support, 7 SFT III, 21 SIMS, 27 storage capacity, 7 storage capacity values conventions, 30 Subscriber's Choice, HP, 29 system option mode, setting, 12 T technical support, 29 HP, 29 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 43
, 29 Novell documentation, 23 Novell support, 23 product manuals, 29 worksheet, path, 31 X XP Array Manager, 7, 9 XP Array Manager , 7, 9 XP arrays storage capacity, 7 XP LUN Manager, 10 XP Remote Web Console, 7, 9, 12 Z zoning, fabric, 14, 15 XP Disk Array Configuration Guide: Novell NetWare 43 - HP XP20000/XP24000 | HP StorageWorks XP Disk Array Configuration Guide: Novell N - Page 44
44
HP StorageWorks
XP Disk Array Configuration Guide: Novell
NetWare
HP XP24000 Disk Array
nl
HP XP20000 Disk Array
nl
HP XP12000 Disk Array
nl
HP XP10000 Disk Array
nl
Abstract
This guide provides requirements and procedures for connecting an XP disk array or SVS 200 to a host system,
and for configuring the disk array for use with the Novell Netware operating system. This document is intended
for system administrators, HP representatives, and authorized service providers who are involved in installing,
configuring, and operating the HP XP storage systems.
Part Number: A5951-96059
Eleventh edition: October 2010