HP XP20000 Hitachi Cross-OS File Exchange User's Guide (T1620-96001,
HP XP20000 Manual
View all HP XP20000 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP XP20000 manual content summary:
- HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 1
Hitachi Universal Storage Platform V Cross-OS File Exchange User's Guide FASTFIND LINKS Document Organization Product Version Getting Help Contents MK-96RD647-01 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 2
Ltd., and the Hitachi Data Systems design mark is a trademark and service mark of Hitachi, Ltd. All other brand or product names are or may be trademarks or service marks of and are used to identify products or services of their respective owners. ii Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 3
Contents Preface vii Overview of Hitachi Cross-OS File Exchange (FX 1-1 About Cross-OS File Exchange Operations 2-1 Components ...2-2 FX Volume Types Function 2-32 AIX Reserve Function 2-34 AIX Reserved Retry Function 2-34 Contents iii Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 4
Compiler Requirements 3-6 Maximum Data Size 3-7 Interoperability with HDLM 3-9 Installing and Configuring the FX Volumes 3-10 Installing the FAL/FCU Software 3-15 Installing FAL Windows 4-22 Allocation Utility for Windows 4-27 iv Contents Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 5
Dataset Attributes 6-8 Acquiring Attribute Information for a Specific Dataset 6-8 Acquiring Attribute Information for Multiple Datasets Value 6-12 Using the FAL Functions 6-14 Multi-Thread Function 6-18 Information Storage Area 6-19 Open Dataset 6-20 Read Data 6-22 Write Data 6-23 Close - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 6
Troubleshooting 7-2 Error Codes and Messages 7-3 FCU Error Codes for UNIX 7-7 FCU Error Codes for Windows Systems 7-16 Calling the Support Center 7-21 EBCDIC-ASCII Code Conversion A-1 Acronyms and Abbreviations Acronyms-1 Index Index-1 vi Contents Hitachi USP V Cross-OS File Exchange User - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 7
(FX) User's Guide describes and provides instructions for installing and using the FX feature of the Hitachi TagmaStore Universal Storage Platform V (USP V) and Network Storage Controller (NSC) disk array subsystems. Please read this document carefully to understand how to use this product, and - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 8
is intended for system administrators, Hitachi Data Systems representatives, and Authorized Service Providers who are involved in installing, configuring, and operating the Hitachi Universal Storage Platform V storage system. This document assumes the following: • The user has a background in data - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 9
User's Guide, MK-96RD615 • User and Reference Guide, MK-96RD635 • Storage Navigator User's Guide, MK-96RD621 : • HiCommand® Device Manager Web Client User's Guide, MK-91HC001 Preface ix Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 10
Hitachi Universal Storage the user or user. Example: # pairdisplay -g oradb Indicates a variable, which is a placeholder for actual text provided by the user or b. Indicates the default value. Example: [ user of adverse conditions and/or consequences (e.g., disruptive operations). Warns the user user user - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 11
1,0244 bytes 1 PB = 1,0245 bytes 1 block = 512 bytes Getting Help If you need to call the Hitachi Data Systems Support Center, make sure to provide as much information about the problem as possible, including the circumstances surrounding the error or failure and the exact content of any messages - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 12
The Hitachi Data Systems customer support staff is available 24 hours/day, seven days a week. If you need technical support, please call: • United States: (800) 446-0744 • Outside the United States: (858) 547-4526 xii Preface Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 13
this document. Make sure to include the document title, number, and revision. Please refer to specific section(s) and paragraph(s) whenever possible. • E-mail: [email protected] • Fax: 858-695-1186 • Mail: Technical Writing, M/S 35-10 Hitachi Data Systems 10277 Scripps Ranch Blvd. San Diego, CA - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 14
- HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 15
USP and NSC subsystems support concurrent attachment to z/OS hosts and multiple open-system platforms, including UNIX®based platforms (e.g., Solaris, HP-UX, IBM® AIX®) for FXoto file transfers. Overview of Hitachi Cross-OS File Exchange (FX) 1-1 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 16
XX-50 or later, Multiple Volume Dataset is supported only for FXmto. Note: FAL/FCU supports two kinds of mainframes, MVSTM and VSE®. For Multiple Volume -system data to z/OS storage (e.g., using Harbor). 1-2 Overview of Hitachi Cross-OS File Exchange (FX) Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 17
Overview of Hitachi Cross-OS File Exchange (FX) 1-3 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 18
- HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 19
Operations This chapter describes how FX operates in typical system configurations and describes the operations a user may perform using FX. Components FCU File Function Bidirectional Data Transfer About Cross-OS File Exchange Operations 2-1 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 20
Figure 2-2 illustrates the typical system configurations required for FXoto operations, which are performed using the Formatter (FMT) and Allocater (ALC) utilities in addition to FCU and FAL. 2-2 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 21
USP and NSC subsystem currently supports OPEN-3, OPEN-8, OPEN-9, OPEN-E, OPEN-L and OPEN-V devices. Please contact your Hitachi Data Systems account team for the latest information on supported LU types. About Cross-OS File Exchange Operations 2-3 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 22
subsystem will reject all opensystem write operations to -B volumes (except disk partitioning and labeling) to protect the z/OS data on these volumes. Figure 2-4 shows the structure of the FX -B volumes. 2-4 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 23
not have any access to the OPEN-x FMT volumes. Figure 2-6 shows the structure of the FX OPEN-x FMT volumes. About Cross-OS File Exchange Operations 2-5 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 24
cannot be used after an FX volume is copied to another volume. Use the DITTO function for this purpose. 2-6 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 25
NT: • Service Pack 1 must be installed when MSCS is configured • A signature is not necessary for the MSCS configuration. A Write from being written. When the Windows 2000/2003/Windows NT Disk Administrator starts again, a request will be made again to Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 26
the default code conversion table does not yield the desired results, create your own code conversion table. Please refer to the IBM code tables for detailed information on EBCDIC-ASCII code conversion. 2-8 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 27
Table 2-1 Default EBCDIC-ASCII Code Conversion Table for FCU H L 0 1 2 3 4 5 6 7 8 9 A B C D E F 0 NUL DLE DS SP & - { } \ 0 (00) (10) (80) (90) (20) (26) Hi Lo 8765 4321 About Cross-OS File Exchange Operations 2-9 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 28
EBCDIC (IBM) 0123 4567 2-10 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 29
contains any of these sequences, FCU will ignore the file and use the default table instead. PIPE Function This function transfers data entries from the mainframe to the application (fullduplex). About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-11 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 30
function is only supported for UNIX systems. It is not supported for Windows 2000/2003/Windows NT. It is supported for mainframe to The limits are 0~1440 seconds (0 = unlimited). The default value is 10 when the timeout value is undefined. Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 31
open pipe('w' mode) | waiting send data entries | send data OK | write data | close pipe | end Application/Utility Program | | open pipe('r' mode) | waiting receive data entries | | receive data OK | About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-13 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 32
When the delimiter option is specified for FXmto, FCU adds the specified delimiter to the end of each data entity in the source file, and then extracts and transfers the data contain only EOF records. 2-14 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 33
Note: FCU version 01-01-38 or later for UNIX and FCU version 01-01-36 or later for Windows 2000/2003/Windows NT are required for the empty file option. About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-15 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 34
record length (RL), or block length (BL) of the dataset. The VSE record option enables the user to specify these values so that FCU can process source/target VSE datasets. If you do not specify option. 2-16 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 35
and the end of the file. The end of a dataset is the EOF record or the end of the final extent. The end of an or later is required for VSE source datasets. FCU supports both fixed-length and variable-length record formats and Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-17 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 36
data entities to the open-system target file and adds the requested delimiter to the end of each data entity. The resulting length of each data entity in a UNIX target with Fixed-Length Records: Delimiters About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 37
with padding, you will not be able to transfer the data back to the original dataset later using FXotm. About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-19 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 38
transfers the data entities to the open-system target file and adds the requested delimiter to the end of each data entity. The RL fields are not transferred. The resulting length of each data not transferred. About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 39
Note: If you use FXmto with padding and delimiters, you will not to be able to transfer the records back to the original dataset later (the padding cannot be removed). About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-21 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 40
equals the maximum record length minus two bytes (minus four for the RL, plus two for the delimiter). 2-22 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 41
Data Set Serial Number 1 1 Except 1 Except 1 Last Volume Containing Data in this Data Set, in Data Set Indicators On Off On Off OK(OK) NG(OK) NG(OK) NG(OK) OK(OK) NG(OK) NG(OK) NG(OK) About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-23 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 42
FCU version 01-01-40 or later is required for VSE target datasets. FCU supports fixedlength and variable-length record formats for FXotm operations. FCU provides the following options 10 3.11 3.12 3.13 2-24 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 43
padding) Figure 2-16 FXotm with Fixed-Length Records: Padding Note: FCU does not extract padding from FXotm source files. About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-25 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 44
source file with padding and delimiters from a previous FXmto transfer. FCU removes the delimiters but not the padding and transfers the data entities with padding entity 2 Record 3: Data entity 3 with padding About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 45
, the delimiters will be regarded as part of the data entities and will be transferred to the target dataset. About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-27 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 46
the maximum record length minus two bytes (CR+LF delimiter), FCU aborts the operation and reports an error. 2-28 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 47
an FXmto operation transfers the data from the intermediate dataset to the target file. For any users with the all-open TagmaStore USP or NSC subsystem (no attached z/OS host), the intermediate by FCU. About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-29 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 48
must use the VSE record option for both transfers (FXotm/mto). Host Access and I/O Contention The user must manage access to the FXmto and FXotm volumes to prevent illegal I/O access contention between the z/ About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 49
several different datasets simultaneously. Please refer to the Reference Manual for RAID 200/300/400/450 FAL & FCU, FX volumes by the z/OS and opensystem hosts is not supported. The user is responsible for managing access to FX volumes to avoid I/O Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 50
problems for the FX volumes: • Open-system access. When the open-system host needs to access an FX volume, vary the volume and its channel path accesses unmounted LUs (e.g., AIX SMIT, HP-UX SAM, and NT Disk Administrator). AIX Shared Open Function To Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 51
Mode No definition of environment variable Exclusive Open (Original mode) ON Shared Open OFF Exclusive Open Other Exclusive Open About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-33 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 52
). FX attempts to send data during reserved status. - The default count number is 10, where no definition of the environment variable is given. - The range of the FAL_RETRY_COUNT variable is 1-600. About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 53
. - If other values outside the range are given, the 16(EBUSY) error code applies. - For setting error codes outside default values, please contact your Hitachi Data Systems technical representative. About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-35 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 54
Bidirectional Data Transfer FX supports bidirectional data transfer for both fixed-length and variablelength z/OS datasets. Bidirectional data with corrupt records or generate an error condition. 2-36 About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 55
About Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 2-37 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 56
- HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 57
necessary to run and operate FX. It also provides instructions on how to install FX. System Requirements Installing and Configuring the FX Volumes Installing the FAL/FCU Software Preparing for Cross-OS File Exchange Operations 3-1 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 58
If remote LUN Manager is not installed, please contact the Hitachi Data Systems representative about LUN Manager configuration services. For information on LUN Manager, refer to the Hitachi TagmaStore USP and NSC LUN Manager User's Guide (MK-94RD203). • z/OS operating systems: MVS, VSE (supported by - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 59
later. - 64bitFCU: HP-UX11.0,11i,11iV2 Solaris supports 64bit to the server. IBM AIX systems support 64bitFAL. For further information on IBM AIX systems, please contact the IBM Support Center. Preparing for Cross-OS File Exchange Operations 3-3 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 60
FX will correctly access your data without meeting these requirements. Table 3-1 Support and OS Conditions OS version VSE2.5 and upper RAID subsystem TagmaStore USP or NSC FX After 01-03-59 3-4 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 61
can transfer data without a VSE parameter. Table 3-2 Support Matrix for VSE OS, VSE Parameter and Record Format attributes, the data transfer is invalid if user does not specify the VSE parameter value as attributes, the data transfer is invalid if user does not specify the VSE parameter value - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 62
value) = BL(value on VTOC) + 8 Note: If you Create a user program by using the dataset attribute exchange rule, you need to use the following functions OS. This information is the result of test and evaluation by Hitachi LTD and is guaranteed for the specified development environment for use with - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 63
13) Solaris Work Shop Compilers 4.2.1 Windows NT 4.0 service Pack 6a HP-UX 10.20 Visual C++® 6.0 SP4 HP® 92453-01 A.10.32.03 HP® C Compiler AIX4.3 AIX5L HP® Tru64 C® for AIX 4.4 C® for AIX, Preparing for Cross-OS File Exchange Operations 3-7 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 64
3390-L is allowed but read only from Mainframe hosts. Read and write are possible from Open system hosts. 3-8 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 65
later. The appropriate support platform versions are shown in Table 3-5. Please refer to the Hitachi Freedom Storage Hitachi Dynamic Link Manager (HDLM) User's Guide for IBM AIX Systems (MP-92DLM111), the Hitachi Freedom Storage Hitachi Dynamic Link Manager (HDLM) User's Guide for HP-UX Systems (MP - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 66
array groups, depending on the microcode level of the subsystem. 2. Complete TagmaStore USP and NSC installation and device configuration as specified in the TagmaStore USP and NSC configuration guide for the applicable open-system platform (e.g., the TagmaStore USP and NSC HP-UX Configuration Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 67
configuration guide. If the partition size for -A or -B volumes is smaller than the mainframe volume size, the open-system host may not be able to access data to the end of the extent of these volumes. Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 68
the FX volumes, and use 2 (two) for the number of alternate cylinders (Table 3-6): Table 3-6 Partition Sizes for 0 - 3345 0 - 3335 0 - 9963 0 - 10013 0 - 19756 0 - 19012 See Note 1. 0 - 3345 3-12 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 69
Hitachi TagmaStore USP and NSC LUN Expansion and Virtual LVI/LUN User's Guide (MK-94RD205), and the Hitachi TagmaStore USP and NSC Sun Solaris Configuration Guide between these two platforms, but can be shared with the other platforms (HP, IBM, DIGITAL UNIX/Tru64, NT) as long as they do not have - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 70
OK OK OK OK SequeNT DYNIX® OK OK OK OK OK OK OK Windows 2000/200 3/ Windows NT HP®True64 ® UNIX ® Solaris NCR® SVR4 OK OK OK OK OK OK OK OK OK OK OK OK if volume has no label. 3-14 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 71
provide instructions for installing FAL/FCU version 01-0136/38 or later. For instructions on your FAL/FCU installation FD, move to the directory fcu/fal.o/dataset.h and remove FAL/FCU by entering: # rm fcu fal.o dataset.h $HOME/FcuMf If you Hitachi USP V Cross-OS File Exchange User's Guide 3-15 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 72
the mkdir command (e.g., # mkdir /usr/lib/X11/app-defaults). /usr /usr/lib /usr/bin /usr/lib/X11 /usr/include /usr/lib/X11/app-defaults 5. Move to the root directory. 6. For UNIX- work. 3-16 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 73
Converter is installed, the libuoc.* file is replaced with the FX Code Converter library (the extension varies according to OS). Before installing FX Code Converter, save libuoc.* with an alias. Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-17 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 74
All Platforms: /usr, /usr/lib b. Solaris: /usr/lib/sparcv9 c. HP-UX: /usr/lib/pa20_64 5. Move to the root directory 6. Copy Remove the CD-ROM from the drive. 9. Log-out once and log-in again 3-18 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 75
version. a) To uninstall FAL/FCU version 01-01-25 or later, use the Windows Add/Remove Programs utility. b) To uninstall FAL/FCU versions 01-01-24 and earlier, delete the folder fal.dll falmt.dll Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-19 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 76
/lib/libfal. # rm /usr/lib/libuoc. # rm /usr/lib/X11/app-defaults/FcuMf # rm /usr/bin/mfformat # rm /usr/bin/allocds 2. Remove the FAL/FCU for 64bit files using the rm command as follows, or string the Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 77
or later, use the Windows Add/Remove Programs utility. • To uninstall FAL/ by serial number). The procedures for entering license keys follow. For UNIX platforms, input the following command from the command line: • HP-UX: Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-21 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 78
ZZ LUSE (Note 2) 5818 5818 5818 5818 5818 not supported 01-XX-YY/2x not LUSE (Note 2) 3331 9959 10009 19752 49429 65534 01-XX-YY/2x LUSE (Note 2) n=number of volumes (Note 3) (min 3338*n-7, 65534) ( . Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 79
volume size (CVS) devices (e.g., OPEN-3-CVS). When formatting a VIR OPEN-x LU, use the number of cylinders defined for VIR minus seven (e.g., use 993 cylinders for a VIR device defined with 1000 Preparing for Cross-OS File Exchange Operations 3-23 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 80
cylinders, enter 993 in the Cylinder Size field. Note: The maximum size for the Allocater is 4369 cylinders. Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 81
execute over the maximum number of cylinders on Windows 2003, the message "Format failed ... Format check error" appears after about a minute. It should be clear when formatting has completed. Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-25 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 82
Figure 3-1 FMT Utility for Windows 2000/2003/Windows NT Figure 3-2 FMT Format Warning and Confirmation Figure 3-3 FMT Format Complete Message 3-26 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 83
Figure 3-4 FMT VOLSER Used Message Figure 3-5 FMT Error Message Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-27 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 84
directory when you start FCU. If you are creating two FX volume definition files, use datasetmount1.dat and datasetmount2.dat, and remove the "1" or "2" from the desired file before starting FCU. 3-28 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 85
MVS 3390-3A MFN VOS3 3380-KB 3380-KA (3) (4) (5) (6) FX Volume Definition File for IBM AIX (mto/otm Shown) Note: n = disk ID number (note that the first, second, and third drives are 0, 1, 2). Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-29 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 86
12 FX Volume Definition File for DYNIX/ptx® /dev/rsda /dev/asdb /dev/rsd /dev/rsd (1) end AAAAAA 3390-3A MFN MVS1 AAAAAA 3390-3A MFN VOS3 ccccccc 3380-KB ddddddd 3380-KA (2) (3) (4) (5) (6) Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 87
(7) Figure 3-13 FX Volume Definition File for Linux Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-31 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 88
The user must specify the RF, BL, and RL using the FCU VSE record option. Note: The FAL functions cannot be used on VSE datasets. Direct access is not supported; must be converted to a SAM file. 3-32 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 89
default value of F is used. -r reclen: Specify the record length (decimal) of the dataset being allocated: 1 to 32760. This parameter is required. If not specified, the default value of 4096 is used. Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 90
allocated in number of cylinders (decimal). This parameter is required. If not specified, the default value of 100 any OPEN-x FMT volumes, ALC displays the FX format disk not found message. 4. Enter the name of the dataset File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 91
finished allocating datasets on FXoto volumes, select Close to close the Allocation panel and exit the ALC utility. Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-35 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 92
Figure 3-14 ALC Utility for Windows 2000/2003/Windows NT systems Figure 3-15 ALC Disk Not Found Message 3-36 Figure 3-16 ALC Allocation Complete Message Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 93
Figure 3-17 ALC Error Message Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 3-37 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 94
3-38 Preparing for Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 95
File Exchange Software This chapter describes the user interface and the commands available to an FX user. FCU for UNIX FCU for Windows Format Utility for Windows Allocation Utility for Windows Using the Cross-OS File Exchange Software 4-1 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 96
manually the default FCU path (absolute or relative) if not in the current directory. - -P + parameters. If you want to perform one specific specific FX operation, enter: fcu -nc -P [parameters] 4-2 Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 97
characters in String to FontSet conversion. WARNING: Cannot convert string "-dt-interface system-medium-rnormal -m to type FontSet. Using the Cross-Os File Exchange Software 4-3 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 98
) File Conversion Utility Ver. xx-xx-xx/xx All right reserved, Copyright (C) 1997, 1998 Hitachi, Ltd. Figure 4-1 FCU Version and Copyright Screen (UNIX) File Conversion Utility Screen The FCU main . 4-4 Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 99
you can enter the desired file name in this field (complete path if not in the current directory). If you do not want initiation parameters manually. The Volume File field displays the FX volume definition file. This file must have the default name and Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 100
default code conversion table (for FXoto only), No = no code conversion, File = enter the file name of your conversion table (with complete path FX operation. The Cancel button removes the values entered by the user and returns the FCU main panel Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 101
field also displays error information for FCU and FX operations. See Appendix C for further information on error conditions. Using the Cross-Os File Exchange Software 4-7 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 102
was previously loaded and you made changes, the current parameter set overwrites and replaces the previously loaded parameter set. If you make changes and do not select - Record length (RL): in bytes 4-8 Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 103
/cxtydz /dev/rdsk/cxtydz /dev/rdsk/cxtydz : end volser volser volser volser volser volser 3390-3B 3390-3A 3390- 3380-KB 3380-KA 3380-KC Figure 4-3 Help-Volume Display (HP-UX Shown) Dataset Information : VSN = xxxxxx Device Emulation Type = Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 104
, leave the param option blank. - If you want to load an FCU parameter definition file when you start FCU, enter the file name with complete path if the file is not in the current directory. Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 105
error information at the DOS prompt. Figure 4-7 FCU Version and Copyright Screen (Windows 2000/2003/Windows NT Systems) Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-11 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 106
-Next Load-Bottom Parameter commands: Save-Insert Save-Replace Delete Wipe View commands: Volume info. MF-file functions. The status bar displays the current line number and total number of lines in the current FCU parameter definition Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 107
definition file. Deleted and replaced lines are discarded, inserted lines are added, and all lines after end are discarded. Note: This FCU main panel status bar updates the current line number when any Parameter-Load command is executed. • The Hitachi USP V Cross-OS File Exchange User's Guide 4-13 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 108
(MF) files (datasets) in the volume specified in the Mainframe file field on the FCU main panel: 4-14 Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 109
? (other than above) - BL = block length - RL = record length - DS = dataset size (in number of tracks) Note: This example shows an FX volume (3380-KA, VSN = AAAAAA ) which contains only two datasets Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-15 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 110
EBCDICASCII button to use the default code conversion table (EA, EcA). Select No for no code conversion (No). Select External table file and enter the file name with path if not in the current directory (e.g., /directory/filename.tbl). - Check the Padding box to request the padding option (Yes - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 111
from the current line to the end. If you do not check the Continuous execution box, FCU will stop after each operation. - Check the Clear log file before execution box to clear the log file for the current FCU parameter definition file (e.g., fcudata.prm.log). The user should clear the FCU log files - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 112
The FCU main panel status bar updates the current line number when any Parameter-Load command is executed. • The Parameter displayed into the current FCU parameter definition file, or Replace the current parameter set (previously loaded) with the Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 113
to Close after the operation is complete. Figure 4-13 Execute Panel Showing Normal End When the operation is complete, the Execute panel displays the result. If to Cl after the operation ends abnorma Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-19 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 114
changes to Close after the operation is canceled. Figure 4-15 Execute Panel Showing Error End Note: FCU does not load the next operation automatically. To perform another FX operation, Panel 4-20 Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 115
, the result of each operation, and the error information (FCU, FAL, and Sys error codes) for each operation. Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-21 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 116
utility defines the size of the OPEN-x volume in cylinders. The maximum number of cylinders allowed by FMT is shown in Table 3-8. Table 4-1 FMT 2) n=number of volumes (Note 3) (min 3338*n-7, 65534) 4-22 Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 117
supported 65534 (min 9996*n-7, 65534) (min 10016*n-7, 65534) (min 19759*n-7, 65534) (min 49439*n-7, 65534) (min(Vc*n*128/ 96-7,65534) (see Note 4) Note 2: XX = 1 or 2; YY,x = number (A) × 46 (A) × 47 Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-23 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 118
the system as administrator. 2. Double-click on the Format icon to open the Format panel (see Figure 3-1). 4-24 Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 119
The maximum size for the Allocater is 4369 cylinders. 6. When the VSN, physical drive number, and cylinder size are correct, select the Start button. When the Format confirmation appears (see Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-25 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 120
. Read process error on specified volume. Write process error on specified volume. Close process error on specified volume. Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 121
on the volume has already been initialized. Remove the error condition and format the volume again. If you execute over the maximum number of cylinders on Windows 2003, the message Allocation panel. Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-27 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 122
4-24 ALC Disk Not Found Message 4. Enter the name of the dataset being allocated in the Dataset field (maximum forty-four characters: A-Z, 0-9 Do not use any spaces or symbols other than @, #, ., and \. Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 123
started due to an error condition, the Allocate check error message is displayed. Figure 4-26 ALC Error Message Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-29 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 124
allocating datasets on FXoto volumes, select Close to close the Allocation panel and exit the ALC utility. 4-30 Using the Cross-OS file Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 125
Using the Cross-Os File Exchange Software Hitachi USP V Cross-OS File Exchange User's Guide 4-31 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 126
- HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 127
be able to perform operations which access volumes that are not defined in the current FX volume definition file. Performing Cross-OS File Exchange Operations 5-1 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 128
Operations - UNIX describes and provides instructions for using the FCU GUI for UNIX Operations - Windows describes and provides instructions for using the FCU GUI for Windows for Windows 2000/2003/Windows NT systems), which enable user programs on the opensystem host to access z/OS, datasets - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 129
manually the default FCU path (absolute or relative) if not in the current directory. - -P + parameters. If you want to perform one specific specific FX operation, enter: fcu -nc -P [parameters] Performing Cross-OS File Exchange Operations 5-3 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 130
: Missing characters in String to FontSet conversion. WARNING: Cannot convert string "-dt-interface system-medium-rnormal -m to type FontSet. 5-4 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 131
at the UNIX prompt. FAL for xxxxxx (OS name) File Conversion Utility Ver. xx-xx-xx/xx All right reserved, Copyright (C) 1997, 1998 Hitachi, Ltd. Figure 5-1 FCU Version and Copyright Screen (UNIX) Performing Cross-OS File Exchange Operations 5-5 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 132
a) If you will not be using an existing FCU parameter def. file, write down the complete path and file name of the source and target files for each FXotm/mto operation. b) Allocate the intermediate . 5-6 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 133
name (with complete path if not in the Function (UNIX) for instructions. 8. The FCU main replaces the previously loaded parameter set). d) You can add a new parameter set to the end of the file as follows: Select File-Load until you reach the end Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 134
end). supports F and V record formats. • Record length (RL): in bytes • Block length (BL): in bytes • TT+R: last block address • EX (Cyl:Trk): data extent size (number of cylinders:number of tracks) 5-8 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 135
)), enter the desired file name in the Parameter File field (with complete path if you do not want to save the file in the current directory should indicate that you are at the end of the file. The FCU GUI for UNIX only allows you Operations 5-9 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 136
use the File-Save command to replace the line that was loaded. Multiple volume Dataset is supported in the case of FileExchangeotm number with six digit of alphabet (A-Z, @, #, and \) or numeral (0-9) characters. Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 137
is the information of the last volume.(The number of volume is 'n'): • VSN: a volume serial number with six digit of alphabet (A-Z, @, #, and "end" specifies that the volume definition file ends here. Performing Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 138
2003/Windows NT systems do not support the -nw option. • The - you want to use the default FCU parameter definition file ( manuals). Do not issue the following signals to an FCU process (UNIX only): 5-12 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 139
, SIGSEGV, SIGSYS, SIGALRM, SIGPOLL, SIGIO, SIGSTOP, SIGTSTP, SIGCONT, SIGTTIN, SIGTTOU, SIGVTALRM, SIGPROF, SIGXCPU, SIGXFSZ, SIGWAITING, SIGLWP, SIGFREEZE, SIGTHAW, SIGCANCEL Performing Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 5-13 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 140
you want to perform. If you will not be using the default FCU parameter definition file, note the name and location of the (or canceled by the user), the FCU program terminates and returns an ending status value. The ending status is included in Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 141
file_name EA No LF Now checking... Complete # Start FCU without checking. Specified FCU parameters. Starting FX operation. Operation completed. Performing Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 5-15 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 142
Figure 5-5 Using the -P param Option 5-16 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 143
want to load an FCU parameter definition file when you start FCU, enter the file name with complete path if the file is not in the current directory. 4. The FCU GUI program now starts loading. . Performing Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 5-17 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 144
Figure 5-6 FCU Version and Copyright Screen (Windows 2000/2003/Windows NT Systems) 5-18 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 145
(s). If you will not be using an existing FCU parameter definition file, write down the complete path and file name of the source file and the VSN:dataset of the target dataset for each DOS prompt. Performing Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 5-19 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 146
using the File-Open command ( ). If you want to create a new file using the FCU GUI, see section Creating FCU Parameter Definition Files (Windows) for instructions. 5-20 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 147
as needed, and then use the Parameter-Save-Replace command ( ) to replace the previously loaded parameter set with the new parameter process all operations from the current line to the end of the file and then self-terminate. The error information Hitachi USP V Cross-OS File Exchange User's Guide 5-21 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 148
Close after the operation is canceled. Execute Panel Showing Canceled Operation Figure 5-9 The Cancel button changes to Close after the operation ends abnormally. Execute Panel Showing Error End 5-22 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 149
not, FCU will not be able to perform FX operations, but you can still create a new parameter definition file. Performing Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 5-23 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 150
number. Replace command ( ) to modify the line as specified. 9. When you want to save your new FCU parameter definition file, select the File-Save menu command ( ). The file extension must be .prm. 5-24 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 151
: Multiple volume Dataset is supported in the case of FileExchangeotm when number of volume is 'n'): • VSN: a volume serial number with six digit of alphabet (A-Z, @, #, and \) or numeral (0-9) characters. Performing Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 152
Each line above must be separated by using "Return" key. n. v) The "end" specifies that the volume definition file ends here. Note: Each parameter must be separated with one or more "space" file. 5-26 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 153
, as it specifies versions. - [Return value] 0 : Normal end - [Return value] 1 : Error end. Note: The fcunw command requires the "Parameter definition file" to function or it is illegal. ] Performing Cross-OS File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide 5-27 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 154
5-28 Performing Cross-Os File Exchange Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 155
several important C functions (Visual C++ for Windows 2000/2003/Windows NT systems) which enable user applications on the open-system hosts to access z/OS data on the TagmaStore USP and NSC . Performing File Access Library (FAL) Operations 6-1 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 156
• The FAL functions support only standard MVS™ that have KEY=0 (refer to OS manuals). Do not issue the following signals user application: - Words that begin with dataset or fast_ - GetVolSers 6-2 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 157
datasetFindNextFile datasetFindFirstFile datasetFindClose Converting Dataset Attribute Information See section Converting DO and RF Information): datasetGetDsorgString datasetGetRecfmString Performing File Access Library (FAL) Operations 6-3 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 158
= open dataset for read access w = open dataset for write access Handle Error end When the datasetOpen function terminates successfully, it returns a handle which identifies the dataset files. 6-4 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 159
buf. Return value reclen long -1 Data entity size transferred to the buffer Error end Figure 6-1 shows the format requirements for variable-length records accessed by the datasetGet . Performing File Access Library (FAL) Operations 6-5 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 160
Return value reclen long -1 Data entity size written into the dataset. Error end Figure 6-2 shows the format requirements for variable-length records accessed by the datasetPut Information). 6-6 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 161
DATASET_HANDLE The datasetHandle value returned by the datasetOpen function. Normal end Error end When the datasetClose function terminates successfully, it returns a value - Error code Performing File Access Library (FAL) Operations 6-7 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 162
number) */ unsigned char lastBlockR; /* last block address (relative record number)*/ } DATASET_FIND_DATA; Acquiring Attribute Information for a Specific information is stored. Normal end Error end When the DatasetGetFileInformation function Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 163
definition file. Area where the dataset attribute information is stored. Normal end Error end When the datasetFindFirstFile function terminates successfully, it returns a handle which is called. Performing File Access Library (FAL) Operations 6-9 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 164
can be repeated until "no dataset found" is returned, or until the user application determines that no more information is needed. Table 6-8 shows the datasetFindNextFile . Return value 0 Normal end Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 165
-1 Error end When the datasetFindClose function terminates successfully, it returns a value of 0. If this function the datasetGetLastError function (see section Acquiring Error Information). Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-11 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 166
organization PO Partial organization ** Other than above types Normal end Error end Converting the Record Format (RF) Type Value datasetError = datasetGetRecfmString Value Type Description 6-12 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 167
indicating the (RF) type: text[0] F fixed-length record V variable-length record U unknown-length record text[1] B blocking record sp spanned record st standard format record Normal end Error end Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-13 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 168
support C++®. The z/OS datasets accessed by the FAL functions must be located on TagmaStore USP or NSC FX volumes. The FX volumes must be installed and configured correctly (see section Installing and Configuring of FAL object module HP-UX # cc -Ae Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 169
Output file name Source file name /usr/lib/libfal64.a libfal64.a = file name of FAL object module HP-UX # cc -Ae +DAZ.0W -D_NO_MT -o Output file name Source file name /usr/lib/ Build and execute. Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-15 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 170
. datasetGetLastError Error processing/termination. Acquire error information. Figure 6-3 Example of Reading Data from an z/OS Dataset Using FAL 6-16 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 171
. datasetGetLastError datasetFindClose Get error information. End of the process. datasetGetLastError Get error information. Figure 6-4 Example of Acquiring z/OS Dataset Attributes Using FAL Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-17 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 172
dataset_Put/dataset_Put2 • Close a specified dataset: dataset_Close • Free storage area: dataset_FreeGlobale • Return a file pointer to top: Open dataset "A". - dataset_Open: Open dataset "B". 6-18 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 173
Arguments, Types and Descriptions for Information Storage Area Argument Type Description dgpp derrno malloc Value: - When this function ends normally, it returns a 1. - When this function ends abnormally, it returns a 0. (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-19 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 174
only • "w": Write only - Return Value: When this function ends abnormally, it returns -1. • Example: 6-20 void *memptr; long err,datasetError; /* global memory area */ /* global err information */ Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 175
(memptr, &err," HYPERLINK "\\\\.\\PHYSICALDRIVE1" \\.\PHYSICALDRIVE1 ,"DSN001 , "3390-3A","r"); : datasetError=dataset_Close(memptr, &err); retcode = dataset_FreeGlobal(&memptr, &err); Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-21 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 176
stored area Read buffer Data length transferred to buffer Data length read to buffer Abnormal end Note: This function provides the ability to read a record of a previously opened see Appendix B. 6-22 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 177
) is returned. When this function ends abnormally, "- 1" is returned. When "- 1" is returned, refer to the contents of g_error for error code details. For further information, see Appendix B. Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-23 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 178
. • Return value: - When this function ends normally, "0" is returned. - When "- 1" is returned, refer to the content of g_error for error code detail. For further information, see Appendix B. 6-24 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 179
, "1" is returned. - When this function ends abnormally, "0" is returned. When "0" is returned, refer to the content of derrno for error code detail. For further information, see Appendix B. Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-25 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 180
is returned. - When this function ends abnormally, "- 1" is returned. - When "- 1" is returned, refer to the contents of g_error for error code detail. For further information, see Appendix B. 6-26 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 181
number) */ unsigned char mftype; /* Mainframe OS(MVS・ VOS3・ MSP/VSE/VOS1/XSP) */ } DATASET_FIND_DATA; • Return Value: - When this function ends normally, "0" is returned. - When this function ends File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-27 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 182
A first dataset attribute information stored area. • Return Value (1): - When this function ends normally, "DATASET_HANDLE" is returned. This handler is used as an argument for next , &ffd) 6-28 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 183
stored area Dataset handler A dataset attribute information stored area Abnormal end This function gets a second dataset and more attribute information. You Argument Type Description Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-29 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 184
returned. - When this function ends abnormally, "- 1" is returned. - When "- 1" is returned, refer to the content of g_error and for error code details. For further information, see Appendix B. 6-30 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 185
-o output file name source file name /usr/lib/libfalmt.a libfalmt.a: object module file name of Multi-thread for FAL. Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-31 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 186
malloc() function is abnormally ended. -30 DATASET_ERROR_FREE_INVALID_AREA Invalid area for global area. -31 DATASET_ERROR_CANNOT_FREE free() function is abnormally ended. 6-32 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 187
error EOF Process of reading data Read one data dataset_Close dataset_FreeGlobal Error process/End process dataset_FreeGlobal Error process/End Close dataset Release work area for FAL Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide 6-33 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 188
6-34 Performing File Access Library (FAL) Operations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 189
11 Troubleshooting This chapter provides descriptions of error codes and support desk contact data. Troubleshooting Error Codes and Messages Calling the Support Center Troubleshooting 7-1 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 190
For general troubleshooting information on the TagmaStore USP and NSC subsystems, please refer to the Hitachi TagmaStore Universal Storage Platform User and Reference Guide (MK-94RD231) or Hitachi TagmaStore Network Storage Controller User and Reference Guide (MK-95RD279). The FAL/FCU - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 191
lists and describes the FAL error codes and provides instructions for resolving each error condition. In Table 7-2, type (LVI) is correct in the FX volume definition file. The supported LVIs are 3390-3A, -3B and -3C. Check the DO Troubleshooting 7-3 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 192
does not support large files accesses a formatted volume from a system that supports large disk is full or it exceeds a limitation for FXmto. Check the size of the data to be written, and extend the size of the dataset as needed. Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 193
. DATASET_ERROR_MULTI_VOLUME_DEFINITION_ NO_NEXT_VOLUME The next VSN is specified in the multiple volume definition file when the volume isn't last on VTOC. Troubleshooting Specified all volumes in the multiple volume definition file. 7-5 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 194
Error Code -50* -51* Error Message and Description DATASET_ERROR_END_OF_FILE End of File (EOF) was detected. DATASET_ERROR_END_OF_VTOC End of VTOC was detected. None. Recommended Action(s) None. 7-6 Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 195
the FCU error codes for UNIX and provides instructions for resolving each error condition. In Table FCU, make sure that the default parameter definition file exists (fcudata. refer to the OS user manual for information on system Troubleshooting 7-7 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 196
refer to Table C.1. If a system error code is displayed, please refer to the OS user manual. For example, if a partition name does not match the partition name in the volume the OS user manual for information on system errors. 7-8 Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 197
, please refer to the OS user manual. Input file error: Invalid organization type The DO type of the dataset is not supported. Display the attribute information using the Help-MF-File command. The DO type must be SAM. Troubleshooting 7-9 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 198
Input file error: Invalid record format The RF type of the dataset is not supported. Display the attribute information using the Help-MF-File command. The RF type must error code is displayed, please refer to the OS user manual. Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 199
. Parameter file: End line The last data The number of parameter supported Code conversion is not specified as No when RDW=Yes. Display the system error code using the Help-Error command. Please refer to the OS user manual Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide 7-11 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 200
can also replace the comment line with a valid parameter. Make sure that the number of VSE user manuals for assistance. Refer to the OS user manuals for assistance. Check the contents of the file. Refer to the OS user manuals Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 201
is not supported. Display trouble shooting. Buffer: Memory allocation error Memory allocation failed. Display the system error code using the Help-Error command. Please refer to the OS user manual for information on system errors. Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 202
to the OS user manual for information on system errors. Output file: Unsupported record format The record format of the output file is not supported. Display the to the OS user manual for information on system errors. 7-14 Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 203
than 35 characters. Parameter: Invalid input file name More than one input file name was specified. Specify only one file name as the input file. Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide 7-15 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 204
lists and describes the FCU error codes for Windows 2000/Windows NT systems and provides instructions for resolving each error condition. Note: Error codes with a plus value are system errors file is correct, check the system error. Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 205
system error code. Mainframe file: Close error An error is detected when closing the mainframe file. Check the FAL error code and system error code. Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide 7-17 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 206
correctly. External table file: Read error A read error was found when reading the code conversion table. Check the system error. External table file: Close error The code conv. table could not be closed. Check the system error. Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 207
-length: Length error The record length for VSE in the parameter definition file is not corrected. Specify the record length for VSE less than 6 characters. Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide 7-19 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 208
-307 VSE block-length: Length error The block length for VSE in the parameter definition file is not corrected. Specify the block length for VSE less than 6 characters. 7-20 Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 209
contents The Hitachi Data Systems customer support staff is available 24 hours/day, seven days a week. If you need technical support, please call: • United States: (800) 446-0744 • Outside the United States: (858) 547-4526 Troubleshooting Hitachi USP V Cross-OS File Exchange User's Guide 7-21 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 210
- HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 211
the EBCDIC-ASCII code conversions performed by the default code conversion table which is provided with FCU). Table A-1 Default FCU EBCDIC-ASCII Conversions (continues on following 16 BS GE 36 UC o 56 76 { EBCDIC-ASCII Code Conversion Hitachi USP V Cross-OS File Exchange User's Guide A-1 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 212
7 EOT 98 q B8 \ D8 Q F8 8 99 r B9 D9 R F9 9 9A ^ ; BA S DA FA 9B BB T DB FB 9C BC U DC 0 FC EBCDIC-ASCII Code Conversion Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 213
He EBCDIC ASCII Hex EBCDIC ASCII Hex EBCDIC ASCII Hex EBCDIC ASCII x 9D BD ] ) DD 1 FD 9E BE W DE 2 FE 9F } BF X DF 3 FF EBCDIC-ASCII Code Conversion A-3 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 214
A-4 EBCDIC-ASCII Code Conversion Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 215
EBCDIC-ASCII Code Conversion A-5 Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 216
- HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 217
Hitachi Cross-OS File Exchange A Device Support Facilities (DSF) command used to perform media maintenance kilobytes logical device line feed Logical Storage Manager logical unit logical unit number Logical volume image Acronyms and Abbreviations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 218
serial number Virtual-Storage Operating System 3 (a Hitachi z/OS OS) Virtual Storage Access Method (not supported by FX) Virtual Storage Extended volume serial number volume table of contents Windows NT systems Acronyms-2 Acronyms and Abbreviations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 219
Acronyms and Abbreviations Hitachi USP V Cross-OS File Exchange User's Guide Acronyms-3 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 220
Acronyms-4 Acronyms and Abbreviations Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 221
support, 3-10 configuration all-mainframe, 1-2 all-open, 1-1 multiplatform, 1-1 configuration illustration oto, 2-3 partition, 3-11 Support Center, Hitachi depth, 3-11 R reserve, 2-31 S SAM sequential access method, 3-33 Sizing Index Hitachi USP V Cross-OS File Exchange User's Guide Index-1 - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 222
Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 223
Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 224
Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 225
Hitachi USP V Cross-OS File Exchange User's Guide - HP XP20000 | Hitachi Cross-OS File Exchange User's Guide (T1620-96001, - Page 226
Hitachi Data Systems Corporate Headquarters 750 Central Expressway Santa Clara, California 95050-2627 U.S.A. Phone: 1 408 970 1000 www.hds.com [email protected] Asia Pacific and Americas 750 Central Expressway Santa Clara, California 95050-2627 U.S.A. Phone: 1 408 970 1000 [email protected] Europe
MK-96RD647-01
Hitachi Universal Storage Platform V
Cross-OS File Exchange User’s Guide
F
AST
F
IND
L
INKS
Document Organization
Product Version
Getting Help
Contents