HP XU018UT Service Guide

HP XU018UT Manual

Get HP XU018UT PDF manuals and user guides View all HP XU018UT manuals
Add to My Manuals
Save this manual to your list of manuals

HP XU018UT manual content summary:

  • HP XU018UT | Service Guide - Page 1
    HP ProBook 4530s Notebook PC Maintenance and Service Guide
  • HP XU018UT | Service Guide - Page 2
    is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
  • HP XU018UT | Service Guide - Page 3
    Safety warning notice WARNING! To reduce the possibility of heat-related injuries or of overheating the computer, do not place the computer directly on your lap or obstruct the computer air vents. Use the computer only on a hard, flat surface. Do not allow another hard surface, such as an adjoining
  • HP XU018UT | Service Guide - Page 4
    iv Safety warning notice
  • HP XU018UT | Service Guide - Page 5
    ...7 Top ...8 TouchPad ...8 Lights ...9 Buttons and fingerprint reader (select models only 10 Keys ...12 Front ...14 Left ...15 Right ...16 Bottom ...17 3 Illustrated parts catalog 18 Service tag ...18 Computer major components 19 Display components ...27 Plastics Kit ...29 Cable Kit ...30 Mass
  • HP XU018UT | Service Guide - Page 6
    42 Electrostatic discharge damage 42 Packaging and transporting guidelines 43 Workstation guidelines 43 Equipment guidelines 44 Component replacement procedures 45 Service tag ...45 Computer feet ...46 Battery ...47 SIM ...48 Bottom door ...49 Optical drive ...50 Hard drive ...52 Memory modules
  • HP XU018UT | Service Guide - Page 7
    111 Using System Diagnostics ...112 6 Specifications ...113 Computer specifications ...113 39.6-cm (15.6-in), HD+ display specifications 114 39.6-cm (15.6-in), HD display specifications 114 43.9-cm (17.3-in), HD+ display specifications 116 Hard drive specifications ...117 Blu-ray BD-R/RE DVD
  • HP XU018UT | Service Guide - Page 8
    viii
  • HP XU018UT | Service Guide - Page 9
    description Category Product Name Processors Chipset Graphics Panel Description HP ProBook 4530s Notebook PC Intel Core i7 processor, Dual Core 2620M, All displays are LED backlit 39.6-cm (15.6-inch) HD, 1366x768 39.6-cm (15.6-inch) HD, 1366x768, includes camera 39.6-cm (15.6-inch) HD, 1366x768,
  • HP XU018UT | Service Guide - Page 10
    Memory Hard drives Description 39.6-cm (15.6-inch) HD, BrightView, 1366x768, includes camera 39.6-cm (15.6-inch) HD, BrightView, 1366x768, includes camera and WWAN 39.6-cm (15.6-inch) HD+, 1600x900 39.6-cm (15.6-inch) HD+, 1600x900, includes camera Support privacy filter Two customer-accessible
  • HP XU018UT | Service Guide - Page 11
    drives: ● DVD-ROM ● DVD+/-RW SuperMulti DL ● Blu-ray ROM DVD+/-RW SuperMulti DL ● Blu-ray R/RE DVD +/-RW SuperMulti DL Drive Supports no optical drive option Integrated dual-array microphone (webcam models only) Integrated mono (non-webcam models) Stereo speakers (2) Integrated webcam (720p HD
  • HP XU018UT | Service Guide - Page 12
    Audio-in (stereo microphone) Audio-out (stereo headphone) RJ-11 (modem) RJ-45 (Ethernet, includes link and activity lights) USB 2.0 (3) VGA (Dsub 15-pin) supporting 1600 × 1200 external resolution at 75-GHz (hot plug/ unplug with auto-detect) HDMI Multi-pin AC port Full-sized keyboard with numeric
  • HP XU018UT | Service Guide - Page 13
    Category Description Windows 7 Professional 32 with Microsoft® Basics Windows 7 Professional 64 with Microsoft Basics Windows 7 Home Premium 64 with Microsoft Basics Windows 7 Home Premium 32 with Microsoft Basics Windows Vista Home Basic 32 with Microsoft Basics Novell™: SuSE Linux™ - SLED 11
  • HP XU018UT | Service Guide - Page 14
    Home Basic 32 Windows 7 Home Premium 64 Windows 7 Home Premium 32 Windows 7 Starter DRDVD Windows 7 Windows Vista - through Service only Web-only support: Windows XP Professional Certified: Microsoft WHQL End-user replaceable parts: AC adapter Battery (system) Hard drive Memory module Optical drive
  • HP XU018UT | Service Guide - Page 15
    2 External component identification Display Component (1) Speakers (2) (2) Internal display switch (3) WWAN antennas (2)* (select models only) (4) WLAN antennas (2)* (5) Internal microphone(s) (1 or 2 depending on model) Description Produce sound. Turns off the display or initiates
  • HP XU018UT | Service Guide - Page 16
    of the Regulatory, Safety, and Environmental Notices that applies to your country or region. These notices are located in Help and Support. Top TouchPad Component (1) (2) TouchPad on/off button TouchPad (3) Left TouchPad button (4) Right TouchPad button Description Turns the TouchPad on and
  • HP XU018UT | Service Guide - Page 17
    . ● On: The computer is on. ● Off: The computer is off or in Hibernation. NOTE: For more information, refer to "HP QuickWeb" in this guide and to the HP QuickWeb software Help. ● White: An integrated wireless device, such as a wireless local area network (WLAN) device and/or a Bluetooth® device
  • HP XU018UT | Service Guide - Page 18
    : ● Windows 7-Select Start > Control Panel > System and Security > Power Options. ● Windows Vista-Select Start > Control Panel > System and Maintenance > Power Options ● Or refer to the HP Notebook Reference Guide. 10 Chapter 2 External component identification
  • HP XU018UT | Service Guide - Page 19
    QuickWeb, press the button to open the default Web browser. NOTE: For more information, refer to "HP QuickWeb" in this guide and to the HP QuickWeb software Help. If your computer does not have HP QuickWeb software, the button does not perform any action or function. Turns the wireless feature on or
  • HP XU018UT | Service Guide - Page 20
    Keys NOTE: Refer to the illustration that most closely matches your computer. Component (1) esc key (2) Function keys (3) num lk key (4) fn key (5) Start key (6) Embedded numeric keypad keys (7) Menu key Description Displays system information when pressed in combination with the fn
  • HP XU018UT | Service Guide - Page 21
    Component (1) esc key (2) Function keys (3) num lk key (4) Integrated numeric keypad (5) fn key (6) Start key (7) Menu key Description Displays system information when pressed in combination with the fn key. Execute frequently used system functions when pressed in combination with the
  • HP XU018UT | Service Guide - Page 22
    Audio-in (microphone) jack Description ● White: The hard drive or optical drive is being accessed. ● Amber: HP 3D DriveGuard has temporarily parked the hard drive. Supports the following digital card formats: ● Memory Stick Pro ● Memory Stick Duo Pro ● MultiMediaCard ● MultiMediaCard Micro ● Secure
  • HP XU018UT | Service Guide - Page 23
    is normal for the internal fan to cycle on and off during routine operation. Connects an external VGA monitor or projector. Connects a network cable. Left 15
  • HP XU018UT | Service Guide - Page 24
    Component (7) HDMI port (8) (9) (10) ExpressCard slot USB port USB port Right Description Connects an optional video or audio device, such as a highdefinition television, or any compatible digital or audio component. Reads and writes to ExpressCards. Connects an optional USB device. Connects an
  • HP XU018UT | Service Guide - Page 25
    your country or region. If you replace the module and then receive a warning message, remove the module to restore computer functionality, and then contact technical support through Help and Support. Bottom 17
  • HP XU018UT | Service Guide - Page 26
    helps a service technician to determine what components and parts are needed. ● Warranty period (4). This number describes the duration (in years) of the warranty period for the computer. ● Model description (5). This is the alphanumeric identifier used to locate documents, drivers, and support for
  • HP XU018UT | Service Guide - Page 27
    Computer major components Computer major components 19
  • HP XU018UT | Service Guide - Page 28
    For use in silver HP ProBook 4530s models: ● 39.6-cm (15.6-inch) HD, anti-glare, without webcam ● 39.6-cm (15.6-inch) HD, anti-glare, with webcam ● 39.6-cm (15.6-inch) HD, anti-glare, with webcam and WWAN ● 39.6-cm (15.6-inch) HD, BrightView, without webcam ● 39.6-cm (15.6-inch) HD, BrightView, with
  • HP XU018UT | Service Guide - Page 29
    (12) (13) For use in 4530s models with UMA graphics with WWAN For use in 4530s models with UMA graphics without WWAN Processor Dual Core B810, 1.6-GHz, with 2-MB L3 cache WWAN modules HP lc2010 HSPA Mobile Broadband Module HP un2430 EV-DO/HSPA Mobile Broadband Module WLAN module Spare part number
  • HP XU018UT | Service Guide - Page 30
    Item Description Spare part number Atheros AR9002WB-1NGB 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados,
  • HP XU018UT | Service Guide - Page 31
    Item Description Spare part number Ralink 5390GN 802.11b/g/n 1x1 WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Baltics, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin,
  • HP XU018UT | Service Guide - Page 32
    Item Description Spare part number Realtek 8188GN 802.11b/g/n 1x1 WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Baltics, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin
  • HP XU018UT | Service Guide - Page 33
    Item Description (14) (15) (16) (17) (18) (19) (20) (21) (22) (23) (24) Heat sink (includes replacement thermal material) For use in models with UMA graphics Fan Optical drive connector Hard drive extension board USB board For use in 4530s models Base enclosure For use in 4530s models Battery, Li-
  • HP XU018UT | Service Guide - Page 34
    Item Description (25) ● DVD-ROM Drive Bottom door For use in 4530s models Spare part number 647949-001 646263-001 26 Chapter 3 Illustrated parts catalog
  • HP XU018UT | Service Guide - Page 35
    Display components Item Description (1) Display bezel For use with HP ProBook 4530s models with a webcam For use with HP ProBook 4530s models without a webcam (2) Display hinge covers For use with HP ProBook 4530s models Spare part number 646266-001 646265-001 646281-001 Display components 27
  • HP XU018UT | Service Guide - Page 36
    (not illustrated) (4) Display panel 39.6-cm (15.6-inch) HD, anti-glare 39.6-cm (15.6-inch) HD, BrightView 39.6-cm (15.6-inch) HD+ 43.9-cm (17.3-inch) HD+, anti-glare (5) Display hinges (includes left and right hinges) For use with HP ProBook 4530s models (6) Webcam cable (7) Display Cable Kit For
  • HP XU018UT | Service Guide - Page 37
    Plastics Kit Item Description Plastics Kit for use in 4530s models (1) RJ-11 holder (2) Secure Digital card protective insert (3) ExpressCard slot protective insert (4) Optical drive protective insert Spare part number 646309-001 Plastics Kit 29
  • HP XU018UT | Service Guide - Page 38
    models (1) Battery connector cable (2) Power connector cable (3) RJ-11 connector cable Mass storage devices Description Optical drives For use in 4530s models: ● Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive ● Blu-ray Disc ROM with SuperMulti DVD±R/RW DL Drive ● DVD±RW and CD-RW
  • HP XU018UT | Service Guide - Page 39
    use in the United Kingdom For use in the United States Rubber Kit (includes SIM bumper and feet) For use with model 4530s Screw Kit For use with model 4530s Spare part number 609939-001 609948-001 609940-001 609947-001 490371-D01 490371-011 490371-202 490371-AA1 490371-081 490371
  • HP XU018UT | Service Guide - Page 40
    Sequential part number listing Spare part number Description 449137-001 RTC battery 490371-001 Power cord for use in North America 490371-011 Power cord for use in Australia and New Zealand 490371-021 Power cord for use in Europe, the Middle East, and Africa 490371-031 Power cord for use in
  • HP XU018UT | Service Guide - Page 41
    Spare part number Description 593127-001 Atheros AR9002WB-1NGB 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Bangladesh, Barbados
  • HP XU018UT | Service Guide - Page 42
    spare part kit does not include a modem module cable. The modem module cable is included in the Cable Kit, spare part number 646303-001 for 4530s models. See Cable Kit on page 30 for more Cable Kit spare part number information. 630703-001 Ralink 5390GN 802.11b/g/n 1x1 WiFi Adapter for
  • HP XU018UT | Service Guide - Page 43
    3.3-GHz) processor, 3-MB L3 cache (includes thermal material) 632155-001 HP lc2010 HSPA Mobile Broadband Module 633252-001 750-GB, 7200-rpm hard drive battery 633809-001 9-cell, 93 WHr, 2.8 Ah Li-ion battery 634400-001 HP un2430 EV-DO/HSPA Mobile Broadband Module 634638-001 500-GB, 5400-rpm hard
  • HP XU018UT | Service Guide - Page 44
    Spare part number Description 636672-001 Intel Centrino Advanced-N 6230 for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Baltics, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin,
  • HP XU018UT | Service Guide - Page 45
    646263-001 Bottom door for use in 4530s models 646265-001 Display bezel for use with HP ProBook 4530s models without a webcam 646266-001 Display bezel for use with HP ProBook 4530s models with a webcam 646269-001 Display enclosure for use in HP ProBook 4530s models 646273-001 Display Cable Kit
  • HP XU018UT | Service Guide - Page 46
    SIM bumper and feet) 646309-001 Plastics Kit for use in 4530s models 646311-001 Display panel, 39.6-cm (15.6-inch) HD, anti-glare 646312-001 Display panel, 39.6-cm (15.6-inch) HD, BrightView 646313-001 Display panel, 43.9-cm (17.3-inch) HD+, anti-glare 646760-001 Intel Celeron processor, B810
  • HP XU018UT | Service Guide - Page 47
    number Description 647001-001 39.6-cm (15.6-inch) display assembly, HD, anti-glare, without webcam, for use in 4530s models 647002-001 39.6-cm (15.6-inch) display assembly, HD, anti-glare, with webcam, for use in 4530s models 647003-001 39.6-cm (15.6-inch) display assembly, HD, anti-glare, with
  • HP XU018UT | Service Guide - Page 48
    Flat-bladed screwdriver ● Phillips P0 and P1 screwdrivers ● Torx T8 screwdriver Service considerations The following sections include some of the considerations that you must keep pressure only at the points designated in the maintenance instructions. 40 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 49
    Cables and connectors CAUTION: When servicing the computer, be sure that cables are placed be sure that the optical drive tray is closed. Handle drives on surfaces covered with at least one inch of shock-proof foam. Avoid dropping drives from any height onto any surface. After removing a hard drive
  • HP XU018UT | Service Guide - Page 50
    DIPS from Styrofoam Removing bubble pack from PCB Packing PCBs in foam-lined box Typical electrostatic voltage levels Relative humidity 10% 40% 35,000 V 15,000 V 12,000 V 5,000 V 6,000 V 800 V 2,000 V 700 V 11,500 V 4,000 V 14,500 V 5,000 V 26,500 V 20,000 V 21,000 V 11,000 V 55
  • HP XU018UT | Service Guide - Page 51
    material. ● Use a wrist strap connected to a properly grounded work surface and use properly grounded tools and equipment. ● Use conductive field service tools, such as cutters, screwdrivers, and vacuums. ● When fixtures must directly contact dissipative surfaces, use fixtures made only of static
  • HP XU018UT | Service Guide - Page 52
    with ground cords of one megohm resistance ● Static-dissipative tables or floor mats with hard ties to the ground ● Field service kits ● Static awareness labels ● Material-handling packages ● Nonconductive plastic bags, tubes, or boxes ● Metal tote boxes ● Electrostatic voltage levels and
  • HP XU018UT | Service Guide - Page 53
    helps a service technician to determine what components and parts are needed. ● Warranty period (4). This number describes the duration (in years) of the warranty period for the computer. ● Model description (5). This is the alphanumeric identifier used to locate documents, drivers, and support for
  • HP XU018UT | Service Guide - Page 54
    Computer feet The computer feet are adhesive-backed rubber pads. The feet are included in the Rubber Kit, spare part number 646307-001 for HP ProBook 4530s models and 646308-001. There are 4 rubber feet that attach to the base enclosure in the locations illustrated below. 46 Chapter 4 Removal and
  • HP XU018UT | Service Guide - Page 55
    Battery Description 9-cell, 93 WHr, 2.8 Ah Li-ion battery 8-cell, 73 WHr, 2.8 Ah Li-ion battery 6-cell, 47 WHr, 2.2 Ah Li-ion battery Spare part number 633809-001 633807-001 633805-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the
  • HP XU018UT | Service Guide - Page 56
    SIM NOTE: This section applies only to computer models with WWAN capability. NOTE: If there is a SIM inserted in the SIM slot, it must be removed before disassembling the computer. Be sure that the SIM is reinserted in the SIM slot after reassembling the computer. Before removing the SIM, follow
  • HP XU018UT | Service Guide - Page 57
    Bottom door Description Bottom door for use in 4530s models Spare part number 646263-001 Before disassembling the computer, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is
  • HP XU018UT | Service Guide - Page 58
    Optical drive NOTE: All optical drive spare part kits include an optical drive bezel. Description For use in 4530s models: Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive Blu-ray ROM DVD±RW SuperMulti DL Drive DVD±RW and CD-RW SuperMulti DL
  • HP XU018UT | Service Guide - Page 59
    4. Remove the optical drive (3) from the computer. 5. If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you. 6. Remove the two Phillips PM2.0×3.0 screws (1) that secure the optical drive bracket to the optical drive. 7. Remove the optical drive
  • HP XU018UT | Service Guide - Page 60
    Hard drive NOTE: All hard drive spare part kits include a hard drive bracket and screws. Description 750-GB, 7200-rpm hard drive 640-GB, 5400-rpm hard drive 500-GB, 7200-rpm hard drive 500-GB, 5400-rpm hard drive 320-GB, 7200-rpm hard drive 320-GB, 5400-rpm hard drive 250-GB, 7200-rpm hard drive
  • HP XU018UT | Service Guide - Page 61
    4. Remove the hard drive (3) from the hard drive bay. 5. If it is necessary to replace the hard drive bracket, remove the tape (1) that secures the Mylar cover down onto the bracket, and then lift to open the Mylar cover (2). 6. Remove the two Phillips PM3.0×3.0 hard drive bracket screws (3) from
  • HP XU018UT | Service Guide - Page 62
    Memory modules NOTE: Primary and expansion memory is installed in a stacked configuration in the bottom of the computer. Description 1-GB (PC3-10600, 1333-MHz, DDR3) 2-GB (PC3-10600, 1333-MHz, DDR3) 4-GB (PC3-10600, 1333-MHz, DDR3) Spare part number 639736-001 621565-001 621569-001 Before
  • HP XU018UT | Service Guide - Page 63
    3. Remove the memory module (2) by pulling the module away from the slot at an angle. NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the memory module slot. NOTE: The computer uses two memory sockets. The top socket houses the expansion memory module and is
  • HP XU018UT | Service Guide - Page 64
    WWAN module CAUTION: The WWAN module and the WLAN module are not interchangeable. Description HP lc2010 HSPA Mobile Broadband Module HP un2430 EV-DO/HSPA Mobile Broadband Module Spare part number 632155-001 634400-001 Before removing the WWAN module, follow these steps: 1. Shut down the
  • HP XU018UT | Service Guide - Page 65
    4. Remove the WWAN module (3) by pulling the module away from the slot at an angle. NOTE: WWAN modules are designed with a notch (4) to prevent incorrect insertion. Figure 4-1 Removing the WWAN module NOTE: If the WWAN antennas are not connected to the terminals on the WWAN module, the protective
  • HP XU018UT | Service Guide - Page 66
    WLAN/Bluetooth combo card The computer uses a card that provides both WLAN and Bluetooth functionality. CAUTION: The WLAN module and the WWAN module are not interchangeable. Description Spare part number Atheros AR9002WB-1NGB 802.11b/g/n 1x1 WiFi and Bluetooth 2.1+EDR Combo Adapter for use in
  • HP XU018UT | Service Guide - Page 67
    Description Spare part number Realtek 8188BC8 802.11a/b/g/n 2x2 WiFi and Bluetooth 3.0+HS Combo Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Baltics, Bangladesh, Barbados,
  • HP XU018UT | Service Guide - Page 68
    Description Spare part number Ralink 8190BC8 802.11b/g/n 2x2 WiFi and Bluetooth 3.0+HS Combo Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Baltics, Bangladesh, Barbados, Belarus,
  • HP XU018UT | Service Guide - Page 69
    Description Spare part number Realtek 8188GN 802.11b/g/n 1x1 WiFi Adapter for use in Afghanistan, Albania, Algeria, Andorra, Angola, Antigua and Barbuda, Argentina, Armenia, Aruba, Australia, Austria, Azerbaijan, Bahamas, Bahrain, Baltics, Bangladesh, Barbados, Belarus, Belgium, Belize, Benin,
  • HP XU018UT | Service Guide - Page 70
    Before removing the WLAN module, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices connected to the computer. 3. Disconnect the
  • HP XU018UT | Service Guide - Page 71
    4. Remove the WLAN module (3) by pulling the module away from the slot at an angle. NOTE: WLAN modules are designed with a notch (4) to prevent incorrect insertion. NOTE: If the WLAN antennas are not connected to the terminals on the WLAN module, the protective sleeves must be installed on the
  • HP XU018UT | Service Guide - Page 72
    Keyboard NOTE: For a detailed list of available keyboards, see Sequential part number listing on page 32. Description Keyboard Spare part number 646300-xxx Before removing the keyboard, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
  • HP XU018UT | Service Guide - Page 73
    4. Insert a screwdriver or similar tool into the gap near the WWAN module compartment and push to disengage the keyboard. 5. Position the computer upright with the front toward you. 6. Open the computer as far as possible. 7. Lift and rotate the keyboard (1) until it rests on the palm rest (2). NOTE
  • HP XU018UT | Service Guide - Page 74
    10. Remove the keyboard (3). Reverse this procedure to install the keyboard. Top cover Description Top cover for use in model 4530s: With a fingerprint reader Without a fingerprint reader Spare part number 646251-001 646253-001 Before removing the top cover, follow these steps: 1. Shut down the
  • HP XU018UT | Service Guide - Page 75
    screws that secure the top cover to the computer: (1) 4 rubber screw covers (2) 10 Torx T8M2.5×6.0 screws NOTE: The following image shows model 4530s. 3. Remove the following screws that secure the top cover to the computer: (1) 3 Phillips PM2.0×4.0 screws from the optical drive bay (2) 3 Phillips
  • HP XU018UT | Service Guide - Page 76
    5. Remove the 6 Torx T8M2.5×6.0 screws that secure the top cover to the computer. NOTE: The following image shows model 4530s. 6. Remove the following cables from the system board: ● Lift the connector latch (1) and disconnect the function board cable (2) ● Disconnect the speaker cable (3) ● Lift
  • HP XU018UT | Service Guide - Page 77
    8. Insert a screwdriver through the holes in the battery bay and press to disengage the top cover from the computer. 9. Position the computer upright with the front toward you. 10. To remove the top cover, pull up on the top of the top cover (1), pull upward on the left (2) and right sides (3), and
  • HP XU018UT | Service Guide - Page 78
    12. Lift the connector latch (1), disconnect the card reader cable (2), and then lift the top cover from the computer (3). Reverse this procedure to install the top cover. 70 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 79
    Card reader board Description Card reader board for use in 4530s models Spare part number 646292-001 Before removing the card reader, follow these steps: 1. Shut down the computer. If you are unsure whether the computer
  • HP XU018UT | Service Guide - Page 80
    upward (4), and then remove it (5). Reverse this procedure to install the card reader. Speaker assembly Description Speaker assembly for use in 4530s models (includes housing) Spare part number 646298-001 Before removing the speaker assembly, follow these steps: 1. Shut down the computer. If
  • HP XU018UT | Service Guide - Page 81
    . 1. Position the top cover upside-down with the front toward you. 2. If disassembling model 4530s, remove the power button board cable from atop the left speaker (1). 3. Remove the four Phillips PM2.0×4.0 screws (2) that secure the speakers to the computer. 4. Lift
  • HP XU018UT | Service Guide - Page 82
    Quick Launch board Description Quick Launch board for use in 4530s models Spare part number 646296-001 Before removing the Quick Launch board, follow these steps: 1. Shut down the computer. If you are unsure whether the
  • HP XU018UT | Service Guide - Page 83
    from the top cover (4). Reverse this procedure to install the Quick Launch board. Power button board Description Power button board for use in model 4530s Spare part number 646294-001 Before removing the power button board, follow these steps: 1. Shut down the computer. If you are unsure whether
  • HP XU018UT | Service Guide - Page 84
    NOTE: Model 4530s shown below. 1. Position the top cover upside-down with the front toward you. 2. Remove the Phillips PM2.0×4.0 screw (1) that secures the board to the top
  • HP XU018UT | Service Guide - Page 85
    part kit does not include a modem module cable. The modem module cable is included in the Cable Kit, spare part number 646303-001 for 4530s models. See Cable Kit on page 30 for more Cable Kit spare part number information. Description Modem module Spare part number 628824-001 Before removing
  • HP XU018UT | Service Guide - Page 86
    4. Disconnect the modem module cable (3) from the modem module. Reverse this procedure to install the modem module. 78 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 87
    Lid switch Description Lid switch for use in 4530s models Spare part number 646289-001 Before removing the lid switch, follow these steps: 1. Shut down the computer. If you are unsure whether the computer
  • HP XU018UT | Service Guide - Page 88
    4. Lift the board from the computer (4). Reverse this procedure to install the lid switch. 80 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 89
    USB board Description USB board for use in 4530s models Spare part number 646287-001 Before removing the USB board, follow these steps: 1. Shut down the computer. If you are unsure whether the computer
  • HP XU018UT | Service Guide - Page 90
    5. Lift the board and cable straight up out of the computer (5) Reverse this procedure to install the USB board. 82 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 91
    Optical drive connector Description Optical drive connector Spare part number 646286-001 Before removing the optical drive connector, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through
  • HP XU018UT | Service Guide - Page 92
    3. Lift the optical drive connector from the computer (2). Reverse this procedure to install the optical drive connector. 84 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 93
    RJ-11 jack cable NOTE: The RJ-11 jack cable is included in the Cable Kit, spare part number 646303-001 for 4530s models. Before removing the RJ-11 jack cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or
  • HP XU018UT | Service Guide - Page 94
    NOTE: All system board spare part kits include replacement thermal material. Description System board for use in 4530s models with UMA graphics with WWAN System board for use in 4530s models with UMA graphics without WWAN Spare part number 646245-001 646246-001 Before removing the system board
  • HP XU018UT | Service Guide - Page 95
    and the display cable (2) from the system board, and remove the cables from the routing clip (3). 3. If removing the system board from model 4530s, remove the two Phillips PM2.5×5.0 screws (1) that secure the system board to the base enclosure. 4. Lift the optical drive connector latch (2), and then
  • HP XU018UT | Service Guide - Page 96
    5. Lift the system board up at an angle (4) to gain access to the cables underneath. 6. On the bottom of the system board, disconnect the battery connector cable (1) from the system board. 7. Disconnect the smaller power cable (2) and the larger power cable (3) from the system board. 8. Lift the
  • HP XU018UT | Service Guide - Page 97
    RTC battery Description RTC battery Spare part number 449137-001 Before removing the RTC battery, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect
  • HP XU018UT | Service Guide - Page 98
    3. Lift the battery from the system board (2). Reverse this procedure to install the RTC battery. 90 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 99
    Fan Description Fan Spare part number 646285-001 Before removing the fan, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system. 2. Disconnect all external devices
  • HP XU018UT | Service Guide - Page 100
    4. Remove the fan from the system board (3). Reverse this procedure to install the fan. NOTE: To properly ventilate the computer, allow at least a 7.6-cm (3-in) clearance on the left side of the computer. The computer uses an electric fan for ventilation. The fan is controlled by a temperature
  • HP XU018UT | Service Guide - Page 101
    Heat sink All heat sink spare part kits include replacement thermal material. Description Heat sink for use in computers with UMA graphics Spare part number 646283-001 Before removing the heat sink, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in
  • HP XU018UT | Service Guide - Page 102
    3. Remove the heat sink from the system board (5). NOTE: For UMA models, thoroughly clean thermal material from the surface of the system board (1) and heat sink (2) each time you remove the heat sink. All heat sink and processor spare part kits include thermal material. Reverse this procedure to
  • HP XU018UT | Service Guide - Page 103
    Description Intel Core i5 processors, Dual Core 2540M, 2.6-GHz (turbo up to 3.3-GHz) processor with 3-MB L3 cache 2520M, 2.5-GHz (turbo up to 3.2-GHz) processor with 3-MB L3 cache 2430M, 2.4-GHz (turbo up to 3.0-GHz) processor 3-MB L3 cache 2410M, 2.3-GHz (turbo up to 2.9-GHz) processor with 3-MB L3
  • HP XU018UT | Service Guide - Page 104
    i. Top cover (see Top cover on page 66) j. System board (see System board on page 86) k. Fan (see Fan on page 91) l. Heat sink (see Heat sink on page 93) Remove the processor: 1. Position the computer upside-down with the front toward you. 2. Use a flat-bladed screwdriver to turn the processor
  • HP XU018UT | Service Guide - Page 105
    Power cable The power cable is included in the Cable Kit, spare part number 646303-001 for 4530s models. Before removing the power cable, follow these steps: 1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation,
  • HP XU018UT | Service Guide - Page 106
    3. Lift the power cable assembly from the computer (2). Reverse this procedure to install the power cable. 98 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 107
    For use in silver HP ProBook 4530s models: ● 39.6-cm (15.6-inch) HD, anti-glare, without webcam ● 39.6-cm (15.6-inch) HD, anti-glare, with webcam ● 39.6-cm (15.6-inch) HD, anti-glare, with webcam and WWAN ● 39.6-cm (15.6-inch) HD, BrightView, without webcam ● 39.6-cm (15.6-inch) HD, BrightView, with
  • HP XU018UT | Service Guide - Page 108
    3. If necessary, disconnect the webcam cable (1) and display cable (2) from the system board, and then remove the cables from the clip (3). 100 Chapter 4 Removal and replacement procedures
  • HP XU018UT | Service Guide - Page 109
    4. Remove the four Phillips PM2.5×7.0 screws (1) from the hinges, and then remove the display from the computer (2). When installing the display assembly, be sure that the wireless antenna cables are routed and arranged properly. Failure to properly route the antennas can result in degradation of
  • HP XU018UT | Service Guide - Page 110
    hinges, pull the hinges straight up and off the display to remove them. Display hinge covers are available using spare part number 646281-001 for 4530s models. 6. To replace the display bezel, remove the two rubber screw covers (1) and the two Torx T8M2.5×6.0 screws (2) in the bottom corners of the
  • HP XU018UT | Service Guide - Page 111
    (3). The display panel is available using the following spare part numbers: ● 646311-001: 39.6-cm (15.6-inch) HD, anti-glare ● 646312-001: 39.6-cm (15.6-inch) HD, Brightview ● 647011-001: 39.6-cm (15.6-inch) HD+ ● 646313-001: 43.9-cm (17.3-inch) HD+, anti-glare Component replacement procedures 103
  • HP XU018UT | Service Guide - Page 112
    the cable from the panel (2). The display cable is available using spare part number 605766-001 for models without a webcam, 646273-001 for 4530s HD+ models. 13. If it is necessary to replace the display hinges, remove the four Phillips PM2.5×3.0 screws (1) that secure each display hinge
  • HP XU018UT | Service Guide - Page 113
    14. Remove the display hinges (2). Display hinges are available using spare part number 646279-001 for 4530s models. 15. If you need to remove the WLAN or WWAN antennas, lift the WLAN antenna cables (1) or WWAN antenna cables (2) from the clips and routing paths (3)
  • HP XU018UT | Service Guide - Page 114
    paths in the display enclosure. The display cable is available using spare part number 605766-001 for models without a webcam, 646273-001 for 4530s HD+ models. The webcam cable is available using spare part number 646275-001. Reverse this procedure to reassemble and install the display assembly
  • HP XU018UT | Service Guide - Page 115
    Component replacement procedures 107
  • HP XU018UT | Service Guide - Page 116
    keyboard or mouse connected to a USB port can be used with Computer Setup only if USB legacy support is enabled. To start Computer Setup, follow these steps: 1. Turn on or restart the computer esc, and then follow the on-screen instructions. 108 Chapter 5 Computer Setup (BIOS) and System Diagnostics
  • HP XU018UT | Service Guide - Page 117
    icon in the lower-left corner of the screen, and then follow the on-screen instructions. - or - Use the tab key and the arrow keys to select File > icon in the lower-left corner of the screen, and then follow the on-screen instructions. - or - Use the tab key and the arrow keys to select File >
  • HP XU018UT | Service Guide - Page 118
    HP Web site. Most BIOS updates on the HP Web site are packaged in compressed files called SoftPaqs. Some download packages contain a file named Readme.txt, which contains information regarding installing and troubleshooting screen, and then follow the on-screen instructions. - or - Use the tab key
  • HP XU018UT | Service Guide - Page 119
    docked in an optional docking device, or connected to an optional power source. During the download and installation, follow these instructions cable, or cord. 1. Select Start > Help and Support > Maintain. 2. Follow the on-screen instructions to identify your computer and access the BIOS update you
  • HP XU018UT | Service Guide - Page 120
    repeats the start-up test and checks for intermittent problems that the start-up test does not detect. battery fails the test, contact HP Customer Support to report the issue and purchase to run, and then follow the on-screen instructions. NOTE: If you need to stop a diagnostics test while
  • HP XU018UT | Service Guide - Page 121
    6 Specifications Computer specifications Dimensions, 4530s models Length Width Height (front to rear) to 35°C -20°C to 60°C 32°F to 95°F 41°F to 95°F -4°F to 140°F 10% to 90% 5% to 95% -15 m to 3,048 m -15 m to 12,192 m 50 ft to 10,000 ft -50 ft to 40,000 ft 125 g, 2 ms, half-sine 200 g, 2
  • HP XU018UT | Service Guide - Page 122
    -glare 300:1 (typical) - Anti-glare 500:1 - BrightView 8 ms 200 nits (typical) WVA LED 1.4 (typ), 1.6 (max) 12,000 hours (0.313, 0.329) +/- 0.03 60% (typical) U.S. 15.6-in 39.6-cm (15.6-in), HD display specifications Active diagonal size Resolution Active area Metric 39.6-cm 1366x768 (HD) 344
  • HP XU018UT | Service Guide - Page 123
    (White) Color tolerance (R, G, B) Color gamut Metric 100 Anti-glare or BrightView 300:1 (typical) - Anti-glare 500:1 - BrightView 8 ms 200 nits (typical) SVA LED 1.4 (typ), 1.6 (max) 12,000 hours (0.313, 0.329) +/- 0.02 +/- 0.03 60% (typical) U.S. 39.6-cm (15.6-in), HD display specifications 115
  • HP XU018UT | Service Guide - Page 124
    43.9-cm (17.3-in), HD+ display specifications Active diagonal size Resolution Active area PPI Surface treatment 300:1 (typical) - Anti-glare 500:1 - BrightView 16 ms 200 nits (typical) SVA LED 1.4 (typ), 1.6 (max) 12,000 hours (0.313, 0.329) +/- 0.02 +/- 0.03 60% NTSC @ CIE 1931
  • HP XU018UT | Service Guide - Page 125
    temperature 5°C to 55°C (41°F to 131°F) *1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications may differ slightly. NOTE: Certain restrictions and exclusions apply. Contact technical support for details. Hard drive
  • HP XU018UT | Service Guide - Page 126
    Blu-ray BD-R/RE DVD±RW SuperMulti DL Drive specifications Applicable disc Read: Write: CD-DA, CD+(E)G, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA, MIXED MODE CD, CD-I, CD-I Bridge (Photo 5,400 KB/sec 5X DVD-RAM 6,750 KB/sec 2X BD-R 9,000 KB/sec 2X BD-RE 9,000 KB/sec 118 Chapter 6 Specifications
  • HP XU018UT | Service Guide - Page 127
    and CD-RW DVD+R, DVD+RW, DVD-R, DVDRW, DVD-RAM 1.5 cm (0.59 in) 12 cm (4.72 in) 8 cm (3.15 in) 1.2 mm (0.047 in) 0.74 μm CD < 175 ms < 285 ms Line-out, 0.7 Vrms 2 MB DVD < /sec 6,750 KB/sec Multiword DMA Mode < 15 seconds < 6 seconds DVD±RW and CD-RW SuperMulti DL Combo Drive specifications 119
  • HP XU018UT | Service Guide - Page 128
    KB/sec 5,400 KB/sec 2,700 KB/sec 6,750 KB/sec 4,500 KB/sec 4,500 KB/sec 4,500 KB/sec Multiword DMA Mode 120 Chapter 6 Specifications
  • HP XU018UT | Service Guide - Page 129
    DVD-ROM Drive specifications Applicable disc Center hole diameter Disc diameter and Form 2), CD-R, CD-RW, Photo CD (single and multisession), CD-Bridge 1.5 cm (0.59 in) 12 cm (4.72 in) 8 cm (3.15 in) 1.2 mm (0.047 in) 0.74 μm CD < 100 ms < 175 ms Line-out, 0.7 Vrms 512 KB DVD < 125 ms < 225
  • HP XU018UT | Service Guide - Page 130
    hardware attached to the computer, as well as provides hardware specification information. You can also add hardware or modify device configurations running utilities, or changing Windows settings. Refer to Windows Help and Support for more information. After you open Device Manager, drill-down to
  • HP XU018UT | Service Guide - Page 131
    ● Restoring the computer to a previous state ● Recovering information using recovery tools NOTE: For detailed instructions, perform a search for these topics in Help and Support. In case of system instability, HP recommends that you print the recovery procedures and save them for later use. NOTE
  • HP XU018UT | Service Guide - Page 132
    : DVDs and DVDs with double-layer (DL) support store more information than CDs, so using them for Backup and Restore. 2. Follow the on-screen instructions to set up your backup, create a system image also use Windows Startup Repair to fix problems that might prevent Windows from starting correctly.
  • HP XU018UT | Service Guide - Page 133
    Support. Using f11 recovery tools CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers
  • HP XU018UT | Service Guide - Page 134
    www.hp.com/support, select your country or region, and follow the on-screen instructions. You can also order the DVD by calling technical support. the recovery process helps you restore the operating system, as well as drivers, software, and utilities. To initiate recovery using a Windows 7
  • HP XU018UT | Service Guide - Page 135
    Restoring the computer to a previous state ● Recovering information using recovery tools NOTE: For detailed instructions, perform a search for these topics in Help and Support. NOTE: In case of system instability, HP recommends that you print the recovery procedures and save them for later use. NOTE
  • HP XU018UT | Service Guide - Page 136
    -layer (DL) support store more information Maintenance > Backup and Restore Center. 2. Follow the on-screen instructions to back up your entire computer (select models only) or your . You can also use Windows Startup Repair to fix problems that might prevent Windows from starting correctly. ● f11
  • HP XU018UT | Service Guide - Page 137
    Support. Using f11 recovery tools CAUTION: Using f11 completely erases hard drive contents and reformats the hard drive. All files you have created and any software installed on the computer are permanently removed. The f11 recovery tool reinstalls the operating system and HP programs and drivers
  • HP XU018UT | Service Guide - Page 138
    www.hp.com/support, select your country or region, and follow the on-screen instructions. You can also order the DVD by calling technical support. recovery process helps you restore the operating system, as well as drivers, software, and utilities. To initiate recovery using a Windows Vista
  • HP XU018UT | Service Guide - Page 139
    8 Power cord set requirements The wide range input feature of the computer permits it to operate from any line voltage from 100 to 120 volts AC, or from 220 to 240 volts AC. The 3-conductor power cord set included with the computer meets the requirements for use in the country or region where the
  • HP XU018UT | Service Guide - Page 140
    Requirements for specific countries and regions Country/region Accredited agency Applicable note number . The wall plug must be a two-pole grounding type with a NEMA 5-15P (15 A, 125 V) or NEMA 6-15P (15 A, 250 V) configuration. 3. The appliance coupler, flexible cord, and wall plug must
  • HP XU018UT | Service Guide - Page 141
    these components, handle them carefully. NOTE: Materials Disposal. This HP product contains mercury in the backlight in the display assembly that NOTE: The procedures provided in this chapter are general disassembly instructions. Specific details, such as screw sizes, quantities, and locations, and
  • HP XU018UT | Service Guide - Page 142
    Perform the following steps to disassemble the display assembly: 1. Remove all screw covers (1) and screws (2) that secure the display bezel to the display assembly. 2. Lift up and out on the left and right inside edges (1) and the top and bottom inside edges (2) of the display bezel until the bezel
  • HP XU018UT | Service Guide - Page 143
    4. Disconnect all display panel cables (1) from the display inverter and remove the inverter (2). 5. Remove all screws (1) that secure the display panel assembly to the display enclosure. 6. Remove the display panel assembly (2) from the display enclosure. 7. Position the display panel assembly
  • HP XU018UT | Service Guide - Page 144
    10. Remove the display panel frame (2) from the display panel. 11. Remove the screws (1) that secure the backlight cover to the display panel. 12. Lift the top edge of the backlight cover (2) and swing it outward. 13. Remove the backlight cover. 14. Position the display panel right-side up. 136
  • HP XU018UT | Service Guide - Page 145
    15. Remove the backlight cables (1) from the clip (2) in the display panel. 16. Position the display panel upside-down. WARNING! The backlight contains mercury. Exercise caution
  • HP XU018UT | Service Guide - Page 146
    18. Remove the backlight from the backlight frame. 19. Disconnect the display panel cable (1) from the LCD panel. 20. Remove the screws (2) that secure the LCD panel to the display rear panel. 21. Release the LCD panel (3) from the display rear panel. 22. Release the tape (4) that secures the LCD
  • HP XU018UT | Service Guide - Page 147
    bottom 17 display 7 front 14 left side 15 right side 16 top 8 computer feet locations 46 spare part number 46 Computer Setup navigating and selecting 108 restoring factory settings 109 computer specifications 113 connectors, service considerations 41 D diskette drive precautions 41 display
  • HP XU018UT | Service Guide - Page 148
    77 spare part number 20, 34, 77 N network jack, identifying 15 num lk key, identifying 12, 13 O operating system, product description 4 optical drive 16 precautions 41 product description 3 removal 50 spare part numbers 25, 30, 50 specifications 118, 119, 120, 121 optical drive connector removal 83
  • HP XU018UT | Service Guide - Page 149
    serviceability, product description 6 setup utility navigating and selecting 108 restoring factory settings 109 SIM slot, identifying 17 SIM, removal 48 slots ExpressCard 16 security cable 15 SIM 17 speaker assembly removal 72 spare part number 20, 37, 72 speakers, identifying 7 specifications Blu
  • HP XU018UT | Service Guide - Page 150
    U USB board removal 81 spare part number 25, 81 USB legacy support 108 USB port, identifying 16 USB ports, identifying 16 V vents, identifying 15, 17 W webcam 8 product description 3 spare part number 28, 36 webcam light, identifying 8 webcam, identifying 8 Windows 7 operating system DVD 126 Windows
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
HP ProBook 4530s Notebook PC
Maintenance and Service Guide