HP Xb31 HP Digital Projector xb31 - (English) Ceiling Mount User Guide
HP Xb31 - Digital Projector XGA DLP Manual
UPC - 808736060691
View all HP Xb31 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xb31 manual content summary:
- HP Xb31 | HP Digital Projector xb31 - (English) Ceiling Mount User Guide - Page 1
User's Guide for the projection distance based upon the desired image size. Use this projection distance to locate the ceiling mount. Ceiling Rod HP recommends that a competent carpenter or electrician install this ceiling mount. v Mount the projector to the ceiling mount bracket with the
Ceiling Mount User’s Guide
4
Ceiling Mounting Procedure:
Before
installation, refer to the
“
Adjusting
the Projected
Image”
section of the Projector
User’s Guide for the projection
distance based upon the de-
sired image size. Use this
projection distance to locate the
ceiling mount.
Drill four holes into the structural ceiling
member.
Attach the ceiling rod to the ceiling with the
four cylinder screws.
HP recommends that a
competent carpenter or
electrician install this
ceiling mount.
Structural Ceiling
Ceiling Rod
Cylinder Screw
Ceiling Bracket
Make necessary roll and yaw adjustments to the
projector.
180°
(
Y
A
W
ADJUSTMENT)
v
Adjust the appropriate ceiling projection image mode from the “Management” menu tab in the
on screen display.
Three Bracket Screws
Be sure to install the
projector
into a solid,
structural ceiling member:
u
w
x
v
Attach the ceiling bracket to the ceiling rod with
the round thumbscrew. Height adjustments can
be made by using different holes on the ceiling
rod and ceiling bracket.
v
The total adjustment range is15.75 to
25.6 inches (40~65cm).
Adjusments can be made
in one inch (2.5cm) increments.
±60°
(
ROLL ADJUSTMENT)
Round Thumbscrew
P/N 36.85807.001-A
Mount the projector to
the ceiling mount bracket
with the three bracket
screws.
±20°