HP Xw4600 HP Workstations for Linux - User Guide - Page 25

LSI Logic MPT Setup Utility - Adapter selection, LSI 3041E and Integrated LSI 1064/1068 Setup

Get HP Xw4600 - Workstation - 2 GB RAM PDF manuals and user guides
UPC - 883585516483
View all HP Xw4600 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 25 highlights

Use the following steps as a guide to set up the LSI 3041E or the onboard LSI controllers for SAS RAID. Details vary based on the specific configuration, such as RAID level and number of disks used. 1. Boot the workstation, and when prompted, press any key to view option ROM messages. A message indicating the presence of the LSI onboard controller or plug-in card and the LSI Logic MPT SAS BIOS appears. Figure 6-1 LSI Logic MPT SAS BIOS 2. Press CTRL-C when indicated to begin RAID configuration and enter the LSI Logic MPT Setup Utility. The first screen will display a list of available adapters. The LSI 3041E plug-in card appears on this list as the SAS1064E, the LSI onboard controllers are listed as the LSI1064 or LSI1068. This screen can be used to change the boot order of the adapters. Figure 6-2 LSI Logic MPT Setup Utility - Adapter selection ENWW LSI 3041E and Integrated LSI 1064/1068 Setup 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
Use the following steps as a guide to set up the LSI 3041E or the onboard LSI controllers for SAS RAID.
Details vary based on the specific configuration, such as RAID level and number of disks used.
1.
Boot the workstation, and when prompted, press any key to view option ROM messages. A
message indicating the presence of the LSI onboard controller or plug-in card and the LSI Logic
MPT SAS BIOS appears.
Figure 6-1
LSI Logic MPT SAS BIOS
2.
Press CTRL-C when indicated to begin RAID configuration and enter the LSI Logic MPT Setup
Utility. The first screen will display a list of available adapters. The LSI 3041E plug-in card appears
on this list as the SAS1064E, the LSI onboard controllers are listed as the LSI1064 or LSI1068.
This screen can be used to change the boot order of the adapters.
Figure 6-2
LSI Logic MPT Setup Utility – Adapter selection
ENWW
LSI 3041E and Integrated LSI 1064/1068 Setup
21