HP Xw4600 HP xw and Z Series Workstations - Front fan and fan holder installat
HP Xw4600 - Workstation - 2 GB RAM Manual
UPC - 883585516483
View all HP Xw4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xw4600 manual content summary:
- HP Xw4600 | HP xw and Z Series Workstations - Front fan and fan holder installat - Page 1
series. Kit contents ● Warranty information ● Fan ● Fan holder for HP xw9300 Workstations ● Combination card guide/fan holder for the HP xw6000 Workstation series ● Combination card guide/fan holder for the HP xw4000 Workstation series and HP 400 Workstations Before you begin To view QuickSpecs and - HP Xw4600 | HP xw and Z Series Workstations - Front fan and fan holder installat - Page 2
, be sure you discharge static electricity by briefly touching a grounded metal object. CAUTION: To prevent damage to the workstation, observe the following Electrostatic Discharge (ESD) precautions while performing the system parts removal and replacement procedures: - Work on a static-free - HP Xw4600 | HP xw and Z Series Workstations - Front fan and fan holder installat - Page 3
in the service guide for your workstation at http://www.hp.com/support/ workstation_manuals. NOTE: For the HP Workstation series, these procedures are also available in the User Guide on the Documentation and Diagnostics CD that shipped with your workstation. 2. Power down the workstation, and then - HP Xw4600 | HP xw and Z Series Workstations - Front fan and fan holder installat - Page 4
fan header on the system board. NOTE: To locate system board components, see the service label on the side access panel. Table 2 Installing the front fan and fan holder HP xw4000 Workstation series HP xw6000 Workstation series HP 400 Workstations HP xw9300 Workstations 4 Front fan and fan - HP Xw4600 | HP xw and Z Series Workstations - Front fan and fan holder installat - Page 5
and power cord. 3. Restore power to the workstation and all external devices. Japanese 日本語 This document is available in Japanese. See http://www.hp.com/support/workstation_manuals, then select your workstation product and select Japanese from the drop down Manual Language menu http://www.hp.com
Front fan and fan holder installation
Introduction
This document describes how to install a front card guide and front fan in the HP xw and HP
Workstation series.
Kit contents
●
Warranty information
●
Fan
●
Fan holder for HP xw9300 Workstations
●
Combination card guide/fan holder for the HP xw6000 Workstation series
●
Combination card guide/fan holder for the HP xw4000 Workstation series and HP
400
Workstations
Before you begin
To view
QuickSpecs
and determine the compatibility of this product with your HP workstation, see
go/productbulletin
.
NOTE:
Only workstations having non-factory-integrated, high power PCI cards require the additional
cooling provided by the optional front chassis fan included in this kit. The optional front chassis fan is
not recommended for use on workstations that have hard drives mounted in the optical bays because
this might reduce long term reliability of these hard drives. HP recommends that your environmental
temperature not exceed 27°C (80°F) if this fan is installed in your workstation and you have hard drives
installed in the optical bay area.
© 2004–2009 Hewlett-Packard Development Company, L.P. Printed in the U.S.
ENWW
Introduction
1