HP Xw4600 HP xw and Z Series Workstations - SATA Optical Drive Installation
HP Xw4600 - Workstation - 2 GB RAM Manual
UPC - 883585516483
View all HP Xw4600 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xw4600 manual content summary:
- HP Xw4600 | HP xw and Z Series Workstations - SATA Optical Drive Installation - Page 1
screwdriver Before you begin To view QuickSpecs and determine the compatibility of this product with your HP workstation, see http://www.hp.com/go/productbulletin. © 2007-2009 Hewlett-Packard Development Company, L.P. Microsoft Window XP and Windows Vista are U.S. registered trademarks of Microsoft - HP Xw4600 | HP xw and Z Series Workstations - SATA Optical Drive Installation - Page 2
, be sure you discharge static electricity by briefly touching a grounded metal object. CAUTION: To prevent damage to the workstation, observe the following Electrostatic Discharge (ESD) precautions while performing the system parts removal and replacement procedures: - Work on a static-free - HP Xw4600 | HP xw and Z Series Workstations - SATA Optical Drive Installation - Page 3
in the service guide for your workstation at http://www.hp.com/support/ workstation_manuals. NOTE: For the HP Workstation series, these procedures are also available in the User Guide on the Documentation and Diagnostics CD that shipped with your workstation. 2. Power down the workstation, and then - HP Xw4600 | HP xw and Z Series Workstations - SATA Optical Drive Installation - Page 4
damage to the drive when moving the workstation. For specific instructions on securing an optional drive, see the service guide for your workstation at http://www.hp.com/support/workstation_manuals. 6. Connect the cables. CAUTION: Connect the power cable before connecting the data cable to reduce - HP Xw4600 | HP xw and Z Series Workstations - SATA Optical Drive Installation - Page 5
was included with your kit, then insert it and follow the on-screen directions to load the software. 11. At the time of component installation, look for device software, firmware and driver updates, designated for your workstation model and operating system. Obtain updates from http://www.hp.com/go - HP Xw4600 | HP xw and Z Series Workstations - SATA Optical Drive Installation - Page 6
the QuickSpecs at http://www.hp.com/go/productbulletin. For the best HDCP performance, HP recommends that you install the latest updates: 1. Blu-ray player firmware 2. Playback application patches 3. Graphics firmware and drivers Updates are located on the support web site for your specific product
SATA optical drive installation
This document describes how to install a standard 5.25-inch, half-height Serial ATA (SATA) optical drive
in your HP workstation.
Kit contents
●
13.335 cm (5.25 inch), half-height SATA optical drive
●
SATA interface cables
●
Four M3 guide screws
●
Optional application software CD (based on optical drive)
●
Warranty information
Tools required
●
T-15 Torx screwdriver
●
Flat-blade screwdriver
Before you begin
To view
QuickSpecs
and determine the compatibility of this product with your HP workstation, see
go/productbulletin
.
© 2007–2009 Hewlett-Packard Development Company, L.P. Microsoft
Window XP and Windows Vista are U.S. registered trademarks of Microsoft
Corporation. Printed in the U.S.
ENWW
Kit contents
1