HP Xw4600 HP Z400 and xw4000 Series Workstations - Selecting and Installing th

Read This First

Selecting and installing the card support bracket for HP

400 and xw4000 series Workstations

This supplementary document describes how to select and install the expansion card support bracket

for HP

400 and xw4000 series Workstations.

Procedure

Two similar expansion card support brackets have been included with your graphics card kit.

1.

Select the expansion card support that fits your workstation.

●

For HP

400 Workstations, select the expansion card support bracket with the barcode label

and the smaller piece of pink foam attached.

●

For the HP xw4000 Workstation series, select the expansion card support bracket without the

barcode label and with the longer piece of pink foam attached.

2.

After installing the expansion graphics card and closing the expansion slot retention clamp, install

the expansion card support.

a.

Position the end of the card support above the expansion card retention clamp

.

b.

Lower the card support into place

.

c.

Secure the card support with two screws

.

Figure 1

© 2009 Hewlett-Packard Development Company, L.P. Printed in the U.S.

ENWW

Selecting and installing the card support bracket for HP 400 and xw4000 series Workstations

1