HP Xw460c HP BladeSystem Onboard Administrator Command Line Interface User Gui
HP Xw460c - ProLiant - Blade Workstation Manual
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xw460c manual content summary:
- HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 1
HP BladeSystem Onboard Administrator Command Line Interface User Guide Version 2.60 Part Number 416217-403 September 2009 (Twelfth Edition) - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 2
© Copyright 2006, 2009 Hewlett-Packard Development Company, L.P. The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 3
...11 Command line conventions...11 HP Integrity server blade restrictions...12 Access level and privileges User account commands...20 ADD USER ...20 ASSIGN...20 ASSIGN OA...21 DISABLE USER ...21 DISABLE STRONG PASSWORDS ...21 ENABLE STRONG PASSWORDS ...21 ENABLE USER...22 HISTORY...22 REMOVE USER - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 4
DOWNLOAD USER CERTIFICATE ...29 REMOVE CA CERTIFICATE ...29 REMOVE USER CERTIFICATE UNASSIGN for LDAP...37 UNASSIGN OA LDAP GROUP ...37 HP SIM commands...39 ADD HPSIM CERTIFICATE ...39 DOWNLOAD HPSIM BLADE ...44 SET FACTORY ...44 SET SCRIPT MODE ...44 SHOW ALL ...45 SHOW DEVICE SERIAL_NUMBER BLADE - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 5
DISABLE EBIPA...49 ENABLE EBIPA ...49 REMOVE EBIPA ...50 SET EBIPA ...50 SHOW EBIPA ...51 Enclosure network configuration commands 53 ADD OA DNS ...53 ADD SNMP TRAPRECEIVER ...53 ADD SSHKEY ...53 ADD TRUSTED HOST...54 CLEAR NTP ...54 CLEAR SSHKEY...54 CLEAR VCMODE ... - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 6
NUMBER ...73 SET ENCLOSURE PDU_TYPE ...73 SET ENCLOSURE SERIAL_NUMBER ...74 SET ENCLOSURE UID ...74 SET LLF INTERVAL...74 SET OA USB...75 SET POWER MODE...75 SET POWER LIMIT ...75 SET POWER OA STATUS ...89 SHOW OA USB ...89 SHOW POWER...90 SHOW SYSLOG ...90 SHOW SYSLOG OA ...91 SHOW VCMODE ...92 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 7
REMOTE...118 SET REMOTE SYSLOG PORT ...118 SET REMOTE SYSLOG SERVER ...119 SHOW SYSLOG SETTINGS ...119 TEST SYSLOG ...119 Remote syslog example ...120 USB support commands...121 DOWNLOAD CONFIG using USB key ...121 SET SERVER DVD for USB key ...121 SHOW USBKEY...121 UPDATE IMAGE using USB key...122 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 8
POWER_CAP_BAYS_TO_EXCLUDE 125 Event notifications ...126 Enclosure event notifications ...126 Command line event notifications ...126 Technical support...129 Before you contact HP...129 HP contact information ...129 Time zone settings ...130 Universal time zone settings ...130 Africa time zone - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 9
any Telnet or SSH session. Telnet session 1. Open a command-line window from a network-connected client. 2. At the prompt, telnet to the where the IP address is the address of your Onboard Administrator. 3. Enter a valid user name and press Enter. 4. Enter a valid password and press Enter. The CLI - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 10
Signal direction -->> Description Receive data Transmit data Data terminal ready System ground Data set ready Request to send Clear to send Ring indicator Value 9600 bps 8 None 1 None 3. When prompted, enter a valid user name, and then press Enter. 4. Enter a valid password, and press - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 11
scenarios: • HP Management Applications (for example: Systems Insight Manager, configuration tasks. Command line conventions CLI input is case-insensitive except when otherwise noted. Commands are organized into a tree, with approximately 30 base commands. Each of these commands can have any number - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 12
blade restrictions HP Integrity server blades do not support all commands. See specific commands for restrictions on HP Integrity server blades. The following commands are not applicable to HP Integrity server blades of the user based on their privileges and permitted bays. Command line 12 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 13
. • All commands username / administrator OA bays (all bays • Allows access to all automatically selected) aspects of the HP BladeSystem Enclosure and Onboard Administrator including configuration, firmware updates, user management, and resetting default settings. Command line 13 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 14
Account classification administrator OA operator operator user Capabilities Account name / Privilege level Bays selected for this account • Can perform all operations to permitted device bays and interconnect bays including virtual power and console access username / administrator No OA bays - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 15
mapped to iLO 2 privileges when using Onboard Administrator AutoLogin. iLO 2 privileges administrator operator user Administer user accounts X Remote console access X X Virtual power and reset X X Virtual media X X Configure iLO 2 settings X Login to iLO X X X Command line 15 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 16
HELP • • • Command: HELP Description: If you supply a command, the usage and help text for the command appears. If no argument is given, all base commands appear. Access level: Administrator, Operator, User Example OA-0018FE27577F> HELP ADD | ASSIGN | CLEAR | CONNECT | DISABLE | DOWNLOAD - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 17
LOGOUT • Command: LOGOUT • Description: Exits the command line interpreter • Access level: Administrator, Operator, User QUIT • • • Command: QUIT Description: Exits the command line interpreter Access level: Administrator, Operator, User General commands 17 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 18
the dash, and the underscore characters. UnnamedRack is the default rack name. SHOW RACK NAME • Command: SHOW RACK NAME • Description: Displays the user defined rack name setting for the enclosure • Access level/Bay level: All • Restrictions: None • Example: OA-0018FE27577F> SHOW RACK NAME Rack Name - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 19
• Access level/Bay level All • Restrictions: None Example SHOW TOPOLOGY Detecting linked enclosures .... Rack Topology (top-down) Rack UUID: 090987654321 Rack Name: UnnamedRack Enclosure Name Status Local IP Address UUID Shorty OK Yes 16.84.190.253 090987654321 OA-0018FE2F998B OK - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 20
, switch5, switch6, switch7, switch8, ldapuser, nobody, vcmuser, vcmuser_, and root (for firmware 1.00 through 1.30). ASSIGN • Command: ASSIGN {SERVER | INTERCONNECT} { | ALL | -} {"" | LDAP GROUP ""} • Description: Assigns one or more - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 21
• Access level/Bay level: OA administrator • Restrictions: The is case sensitive. DISABLE USER • Command: DISABLE USER "" • Description: Disables a user account. The system immediately logs out the user and prevents the user from logging in until the account is enabled. CLI - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 22
Administrators with Onboard Administrator permission are allowed to manage strong passwords ENABLE USER • Command: ENABLE USER "" • Description: Enables a user account that was previously disabled by the DISABLE USER command • Access level/Bay level: OA administrator • Restrictions: The - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 23
users except the default system accounts. • Access level/Bay level: OA administrator • Restrictions: o The - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 24
values range from 10 to 1440 minutes (24 hours). SET USER ACCESS • Command: SET USER ACCESS "" {ADMINISTRATOR | OPERATOR | USER} • Description: Sets the user access level. Additionally, use the ASSIGN command to give the user access rights to the Onboard Administrator, server bays, and - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 25
USER PASSWORD • Command: SET USER PASSWORD "" [""] • Description: Sets a user's password. If you do not supply user name> is case sensitive. o The must be three to eight characters long for firmware 1.00 through 1.30 and 3 to 40 characters long for firmware - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 26
Displays the current Onboard Administrator user session timeout. The session timeout is the number of minutes before inactive sessions view their user information. Example OA-0018FE27577F> SHOW USER Local User "Administrator" Information: Full name: System Administrator Contact Info: User Rights: - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 27
. • Access level/Bay level: All • Restrictions: The field must be a whole number from 1 to 86400. UNASSIGN • Command: UNASSIGN {SERVER | INTERCONNECT} { | ALL | -} {"" | LDAP GROUP ""} • Description: Removes a bay from the - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 28
CERTIFICATE • Command: DOWNLOAD CA CERTIFICATE "" • Description: Downloads a CA certificate to act as the trusted certification authority to validate user certificates when using Two-Factor Authentication. • Access level/Bay level: OA administrator • Restrictions: Allows the download of up to - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 29
CA CERTIFICATE • Command: REMOVE CA CERTIFICATE "" • Description: • Removes the trust certificate corresponding to the SHA1 . Any users having their certificates issued by this CA can no longer login if Two-Factor Authentication is enabled. • Access level/Bay - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 30
Hewlett-Packard Primary Class 2 Certification Authority subjectOrganization = hp.com subjectOrganizationalUnit = IT Infrastructure subjectCommonName = Hewlett-Packard Command: SHOW TWOFACTOR INFO • Description: Displays the configuration details for Two-Factor Authentication • Access level/Bay - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 31
characters, except quotation marks and new lines. o The group name must start with an alpha character. ASSIGN for LDAP • Command: ASSIGN {SERVER | INTERCONNECT} { | ALL | -} {"" | LDAP GROUP ""} • Description: Directory commands 31 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 32
at the access level of the group • Access level/Bay level: OA administrator • Restrictions: None ASSIGN OA LDAP GROUP • Command: ASSIGN OA {"" | LDAP GROUP ""} • Description: Assigns access to the Onboard Administrator to the specified group • Access level/Bay level: OA - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 33
NOLOCAL option, local users are not enabled. • Access level/Bay level: OA administrator • Restrictions: Before you can enable LDAP, configuration must be complete ALL | ""} • Description: Removes the LDAP group from the system. If you specify ALL, then all LDAP groups are removed from the - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 34
OA administrator • Restrictions: Before you can enable the LDAP group, configuration must be complete. SET LDAP GROUP ACCESS • Command SET LDAP GROUP ACCESS "" {ADMINISTRATOR | OPERATOR | USER} • Description: o Sets the LDAP group access level. o Additionally, use the ASSIGN OA command - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 35
SET LDAP PORT • Command: SET LDAP PORT • Description: Sets the TCP port number of the LDAP SSL service. Port 636 is the standard value. • Access level/Bay level: OA administrator • Restrictions: The valid port number range is 1 to 65535 SET LDAP SEARCH • Command: SET LDAP SEARCH - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 36
/Bay level: All • Restrictions: None Example OA-0018FE27577F> SHOW LDAP GROUP LIST Privilege LDAP Group / Level Description Operator [email protected] Widget operators SHOW LDAP INFO • Command: SHOW LDAP INFO • Description: Displays the LDAP settings, including enabled or disabled - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 37
Example OA-0018FE27577F> show ldap info Directory Services (LDAP) Enabled : Disabled Local Users Enabled : Enabled NT Name Mapping : Disabled LDAP • Command: UNASSIGN {SERVER | INTERCONNECT} { | ALL | -} {"" | LDAP GROUP ""} • - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 38
• Description: Disables access to the Onboard Administrator for the group specified • Access level/Bay level: OA administrator • Restrictions: None Directory commands 38 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 39
CERTIFICATE • Description: Adds an HP SIM certificate on the command line. 1. Start with a string that does CERTIFICATE { | "} • Description: Downloads an HP SIM SSO certificate from the specified IP address • Access level/Bay level - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 40
have been uploaded to the Onboard Administrator. SHOW HPSIM INFO • Command: SHOW HPSIM INFO • Description: Displays the current HP SIM SSO configuration for the Onboard Administrator. The data includes the current HP SIM SSO Trust Mode (see SET HPSIM TRUST MODE) and a list of names that the Onboard - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 41
OA CERTIFICATE [] • Description: Downloads a CA supplied pkcs#7 file to replace the current security certificate on Onboard Administrator specified by . If you omit , then the current Onboard Administrator is targeted. Supported protocols are HTTP, FTP - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 42
o OA Host Name (CN) o Organization Name (O) o City or Locality (L) o State or Province (ST) o Country (C) o Organizational Unit o Contact Person o Email Address o Surname o Given Name o Initials o DN Qualifier o Challenge Password o Unstructured Name • Access level/Bay level: OA administrator • - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 43
to the Onboard Administrator. (Optional) Must be 0 to 60 characters long PING • Command: PING [] {ip address> | ""} • Description: Sends ICMP echo messages to a remote IP device. If you omit , then only four packets are sent. Packets are sent at one-second intervals to - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 44
BLADE • Command: SET DEVICE SERIAL_NUMBER BLADE "" • Description: Sets the serial number of the specified Storage, Tape, or I/O expansion blade verifying of entries when SCRIPT MODE is on. o The ADD USER command must have a password argument if executed in SCRIPT MODE. - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 45
Power: No Server Blade Installed Blade #5 Status: Power: No Server Blade Installed Blade #6 Status: Power: No Server Blade Installed Blade #7 Status: Power: Off Current Wattage used: 0 Health: Degraded Unit Identification LED: Off Diagnostic Status: Internal Data OK Management Processor - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 46
is not present. Server 4 Syslog: The blade is not present. Server 5 Syslog: The blade is not present. Server 6 Syslog: The blade is not present. Server 7 Syslog: Could not determine the ip address of the management processor for blade >SHOW TOPOLOGY Detecting linked enclosures .... Rack Topology - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 47
USER LIST * denotes current user User Name Administrator Privilege Acct. Full Name Level Status System Administrator Admin Enabled >SHOW LDAP INFO Directory Services (LDAP) Enabled : Enabled Local Users Insight Display | - | 2.2.2 | 2.2.2 BLADE | AiO SB600c Storage | 7 | 1.20 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 48
Bay level: o All o Bay specific • Restrictions: Dependent on bay privileges Example OA-0016355E560A> SHOW DEVICE SERIAL_NUMBER BLADE Blade 1 serial number: USM81500RP SHOW INTERCONNECT SESSIONS • Command: SHOW INTERCONNECT SESSIONS • Description: Displays which users have serial console sessions in - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 49
each ### ranges from 0 to 255. DISABLE EBIPA CAUTION: : This command cycles power to the interconnect and causes a loss of connectivity. • Command: DISABLE EBIPA {SERVER|INTERCONNECT} [ALL | ]] • Description: Disables the ability of the Onboard Administrator to give devices - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 50
CAUTION: This command cycles power to the interconnect and causes a loss of connectivity. • Command: ENABLE EBIPA {SERVER|INTERCONNECT} [ALL | ]] • Description: Enables the Onboard Administrator to provide IP addresses to the devices in the bays using DHCP. If you do not - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 51
, user • Restrictions: None Example OA-0018FE27577F> SHOW EBIPA EBIPA Settings - Device Bay iLO Processors Domain No N/A [Absent] 2 No N/A [Subsumed] 2A No 16.84.190.43 Server Blade 2B No 16.84.189.243 Server Blade 3 No N/A [Absent] 3A No N/A [Absent] 3B No N/A [Absent] 4 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 52
DNS Server1: 0.0.0.0 Server2: 0.0.0.0 Server3: 0.0.0.0 NTP Server1: 0.0.0.0 Server2: 0.0.0.0 Bay Enabled EBIPA Address Current Address Module Type 1 No 16.84.189.31 Ethernet 2 No N/A [Absent] 3 No N/A [Absent] 4 No N/A [Absent] Enclosure Bay IP Addressing commands 52 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 53
list. DNS servers are used if the system is configured to use a static IP address. If a bay number is not specified, the command defaults to the of eight IP addresses can be added to receive SNMP traps. Only v1 traps are supported. The must be in the form where each ### ranges from 0 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 54
Command: ADD TRUSTED HOST • Description: Adds an IP address to the list of systems allowed connectivity with the Onboard Administrator. • Access level /Bay level: OA administrator, OA operator • NTP server disables NTP. CLEAR SSHKEY • Command: Enclosure network configuration commands 54 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 55
level: OA Administrator OA Bays • Restrictions: o All servers in the enclosure should be powered off before clearing the VCMODE. o The enclosure will no longer be managed by Virtual : DISABLE ENCLOSURE_IP_MODE • Description: Disables Enclosure IP Mode. Enclosure network configuration commands 55 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 56
• Description: Disables HTTPS access to the Onboard Administrator, which prevents access to the web-based user interface • Access level/Bay level: OA administrator, OA operator • Restrictions: None DISABLE enables the SSH protocol. • Access level/Bay level: Enclosure network configuration commands 56 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 57
• Description: Disables SNMP support for the Onboard Administrator. Does not clear the SNMP trap receivers that have been configured. SNMP trap receivers can • Command: DISABLE TRUSTED HOST • Description: Disables the host-based access to the Onboard Administrator. Disabling TRUSTED HOSTS allows all - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 58
Command: DOWNLOAD CONFIG • Description: Downloads a saved configuration file from a specific IP host. The file is not checked for errors but is file to use for SSH logins. The file contains the public keys for users. Supported protocols are HTTP, FTP, and TFTP. Format the as protocol:// - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 59
enclosure IP mode only replace the standby OA module while the enclosure is powered on to ensure persistence of Enclosure IP Mode settings. ENABLE HTTPS • Command NTP • Command: ENABLE NTP • Description: Enables NTP support for the Onboard Administrator Enclosure network configuration commands 59 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 60
• Restrictions: None ENABLE SNMP • Command: ENABLE SNMP • Description: Enables SNMP Trap support for the Onboard Administrator • Access level/Bay level: OA administrator, OA operator • /Bay level: OA administrator, OA operator • Restrictions: None Enclosure network configuration commands 60 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 61
of a DNS server from the list for the specified Onboard Administrator. The DNS servers are used only if the system is configured to use a static IP address. If no bay number is provided, the command default to the active Onboard Administrator. • Access level/Bay level: OA administrator, OA operator - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 62
Command: REMOVE TRUSTED HOST • Description: Removes an IP address from the list of systems allowed to connect to the Onboard Administrator • Access level/Bay level: OA administrator, OA operator • level/Bay level: OA administrator, OA operator Enclosure network configuration commands 62 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 63
This is the mail server where the Onboard Administrator delivers its email-based events. • Access level/Bay level Administrator, OA operator • Restrictions This command is used if the system is configured to use a static IP address. o If you do not specify a bay number, the command defaults to the - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 64
} [] [DYNAMICDNS] [ [ []]] • Description: o Configures IP settings for the of the new IP address of the system when it is received from the DHCP server. o SET IPCONFIG DHCP [] [DYNAMICDNS] • Access level/Bay - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 65
> must be in the form where each ### ranges from 0 to 255 SET SNMP CONTACT • Command: SET SNMP CONTACT "" • Description: Configures the name of the system contact. The default contact is blank. • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be no - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 66
community name is public. o The default write community name is public. SET SNMP LOCATION • Command: SET SNMP LOCATION "" • Description: Configures the SNMP location of the enclosure. The default location is blank. • Access level/Bay level: OA administrator, OA operator • Restrictions: The - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 67
Poll-Interval: 86400 seconds Last Update: 14 Apr 10:41:43 from 16.14.64.51 Link Loss Failover: Not Supported Link Loss Interval: Not Supported Enclosure IP Mode: Not Supported SHOW SNMP • Command: SHOW SNMP • Description: Displays: o SNMP system name Enclosure network configuration commands 67 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 68
/Bay level: OA administrator, OA operator • Restrictions: None Example OA-0018FE27577F> SHOW SNMP SNMP Configuration: Status: Disabled System Name: Shorty System Location: System Contact: Read Community Name: public Write Community Name: No trap receivers specified. SHOW SSHFINGERPRINT • Command - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 69
• Restrictions: None Example Firmware Version: 2.20 Built: 04/14/2008 @ 14:04 OA Bay Number: 1 OA Role: Active Authenticating with public key "rsa-key-123456789" TEST ALERTMAIL • Command: TEST ALERTMAIL • Description: Sends a test AlertMail message to the configured email address • Access - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 70
this information after you delete it. • Command: CLEAR SYSLOG {ENCLOSURE | OA } • Description: Clears the Onboard Administrator system log. If you do not specify a bay number, the Active Onboard Administrator system log is cleared. • Access level/Bay level: OA administrator, OA operator - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 71
have OA permission to perform this command RESTART OA • Command: RESTART OA [] • Description: Resets the Onboard Administrator module specified by . If no bay number is given, then the Onboard Administrator the user is logged in to is restarted. • Access level/Bay level: OA - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 72
EVENTS • Command: SET DISPLAY EVENTS {ON | OFF} • Description: o Turns the displaying of events that are triggered by status changes in the system on or off. o This command is specific to the CLI session, and must be issued for every CLI session to display events in that session. • Access level/Bay - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 73
NAME • Command: SET ENCLOSURE NAME "" • Description: o Changes the enclosure name o The default enclosure name is the mid-plane serial number • Access level/Bay level: OA administrator, OA operator • Restrictions: The must be 1 to 32 characters long and includes all - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 74
o 3=Three-phase, international o 4=DC Power Input Module • Access level/Bay level: OA administrator • Restrictions: 1, 2, 3, 4 SET ENCLOSURE SERIAL_NUMBER • Command: SET ENCLOSURE SERIAL_NUMBER "" • Description: Sets the enclosure serial number. • Access level/Bay level: OA - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 75
: A small number of c3000 Onboard Administrator boards can use only one USB controller at a time. SET POWER MODE • Command: SET POWER MODE {NOTREDUNDANT | REDUNDANT | POWERSUPPLY} • Description: o Configures redundancy settings. o The NOTREDUNDANT setting enables all power supplies to function - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 76
Power savings mode turns unneeded power supplies off. o The increased load on the remaining power supplies increases their efficiency, resulting in less power consumption. • Access level/Bay level: OA administrator • Restrictions: The power savings mode is not supported user. • Access - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 77
ExDS-RACK" SET POWER MODE REDUNDANT SET POWER SAVINGS ON #Power limit must be within the range of 950-8750 SET POWER LIMIT OFF #Enclosure Dynamic Power Cap must be 8B 0 #Configure Protocols ENABLE WEB ENABLE SECURESH ENABLE TELNET ENABLE XMLREPLY ENABLE GUI_LOGIN_DETAIL #Configure Alertmail SET - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 78
Trusted Hosts #REMOVE TRUSTED HOST ALL DISABLE TRUSTED HOST #Configure NTP SET NTP PRIMARY 0.0.0.0 SET NTP SECONDARY 0.0.0.0 SET NTP SECONDARY 0.0.0.0 DISABLE EBIPA INTERCONNECT 1,2,3,4 #Uncomment following line to remove all user accounts currently in the system Enclosure management commands 78 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 79
USERS ALL #Create Users ADD USER "chris" SET USER CONTACT "chris" "" SET USER FULLNAME "chris" "" SET USER ACCESS "chris" ADMINISTRATOR ASSIGN INTERCONNECT 1,2,3,4 "chris" ASSIGN OA "chris" ENABLE USER to remove all LDAP accounts currently in the system #REMOVE LDAP GROUP ALL DISABLE LDAP #Set SSO - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 80
: Status: OK Speed: 48 percent of Maximum speed Maximum speed: 18000 Minimum speed: 10 Power consumed: 21 Product Name: Active Cool 200 Fan Part Number: 412140-B21 Spare Part Number: 413996-001 Version: 2.7 Diagnostic Status: Internal Data OK Location OK Device Failure OK Device - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 81
Enclosure Information: Enclosure Name: Shorty Enclosure Type: BladeSystem c3000 Enclosure Part Number: 123456-B21 Serial Number: 0987654321 UUID: 1234567891011 Asset Tag: ENC-0000Short Midplane Spare Part Number: 123456-001 Power Distribution Unit: [No PDU is present on c3000 enclosures] Onboard - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 82
Display Spare Part# : 441831-001 Manufacturer: HP Fw Version : 2.0 Diagnostic Status: Internal Data OK SHOW ENCLOSURE POWERSUPPLY_SUMMARY • Command: SHOW ENCLOSURE POWER_SUMMARY • Description: Displays a detailed summary of the enclosure's present power state. • Access level/Bay level: All - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 83
OA-0018FE27577F> show enclosure powersupply 1 Power Supply #1 Information: Status: OK AC Input Status: OK Capacity: 1200 Watts Current Power Output: 590 Watts Serial Number: 531300ALL00233 Product Name: HP PROLIANT SERVER PS Part Number: 438203-001 Spare Part Number: XXXXXX-001 Enclosure management - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 84
Product Ver: Diagnostic Status: Internal Data OK Device Failure OK Power Cord OK SHOW ENCLOSURE STATUS • Command: SHOW ENCLOSURE STATUS • Description: Displays the basic health and status of the enclosure subsystem • Access level/Bay level: All • - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 85
Service for troubleshooting, repair, and ordering replacements. • Access level/Bay level: All Bay specific • Restrictions: You must have access to the specified bay. Example OA-0018FE27577F> show fru Enclosure Model: BladeSystem c3000 Enclosure Manufacturer: HP Serial Number: 0987654321 Part Number - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 86
Part Number: 448589-B21 Spare Part Number: 441832-001 Firmware Version: 2.40 HwVersion: A0 Blade 1 Model: ProLiant BL480c G1 Manufacturer: HP Serial Number: USM64204B1 Part Number: 416667-B21 Spare Part Number: 410293-001 Blade 2 Model: Integrity BL860c Manufacturer: hp Serial Number: CSJ0634214 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 87
Power Supply 2 Model: 438203-001 Serial Number: 531300ALL00014 Spare Part Number: XXXXXX-001 Power Supply 3 Model: 438203-001 Serial Number: 531300ALL00399 Spare Part Number: XXXXXX-001 Insight Display Model: BladeSystem c3000 Insight Display Manufacturer: HP Spare Part Number: 441831-001 Firmware - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 88
Part Number : 123456-B21 Spare Part No.: 123456-001 Serial Number : PLO590A9FDJ8 UUID : 123P4R5T6YVUQ04B Manufacturer : HP Firmware Ver. : 2.20 Hw Version : A0 SHOW OA NETWORK • Command: SHOW OA NETWORK [ALL | ]] • Description: Shows the network configuration for - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 89
:27:57:7F Link settings: Forced 100 Mbit - Full Duplex Link Status: Active Enclosure IP Mode: Not Supported SHOW OA STATUS • Command: SHOW OA STATUS [ALL | ]] • Description: Displays health status for the Onboard Administrator. If you do not specify the Onboard Administrator - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 90
effect on HP c3000 OA boards that are hardware revision level C0 and later. Hardware revision is found using the SHOW OA INFO command. • Access level/Bay level: OA Administrator • Restrictions: None Example OA-0018FE27577F> SHOW OA USB Onboard Administrator USB setting = FRONT SHOW POWER • Command - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 91
for user larry from 18.84.33.55, requesting authenticate_user Apr 23 12:25:33 OA: Authentication failure for user hp.com logged into the Onboard Administrator OA-0018FE27577F> SHOW SYSLOG SETTINGS Remote log: Disabled Address: Port: 514 SHOW SYSLOG OA • Command: SHOW SYSLOG OA [ - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 92
• Command: UPDATE {SHOW | DEVICE} [FORCE] {ALL | LCD | TRAY | BLADE [ALL | ]] | ICBAY [ALL | ]] | FAN [ALL displays enclosure devices that are available for firmware upgrade. The UPDATE DEVICE command executes the firmware upgrade process on one or more - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 93
not applicable to HP Integrity server blades. UPDATE IMAGE • Command: UPDATE IMAGE {[FORCE] | SYNC} • Description: Downloads a new flash image from the network and uses the image to update the Onboard Administrator firmware. If a redundant Onboard Administrator is present in the system, this - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 94
formatted as: protocol://host/path/filename. If your FTP server does not support anonymous logins, you can specify a user name and password within the URL formatted as: ftp://username:password@host/path/filename. To save a configuration file to a USB key, use the USB command and provide a filename - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 95
privileges. HPONCFG • Command: HPONCFG [NOAUTOLOGIN] {ALL | ]} { - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 96
bays. POWERON SERVER • Command: POWERON SERVER {ALL | ]} [{NORMAL | PXE | HDD | RBSU}] • Description: o Powers on the specified server blade or all server blades. o Adding an optional boot argument forces the server blade to abandon the regular boot order and boot using the - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 97
• Access level/Bay level: Administrator, operator Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to storage blades. SET NIC • Command: SET NIC {AUTO | FORCED} • Description: Configures the external NIC for Auto-negotiation or forced - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 98
is not applicable to HP Integrity server blades. o This setting is valid only on present blades and is cleared if the blade is removed. SET SERVER POWERDELAY • Command: SET SERVER POWERDELAY {ALL | ]} {number of seconds to delay power | NOPOWERON} • Description: Set the - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 99
BOOT {ALL | ]} • Description: Displays the boot settings for the specified servers • Access level/Bay level: OA administrator Bay specific • Restrictions: o You must have access to the specified bay o This command is not applicable to HP Integrity server blades. Example OA - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 100
specific • Restrictions: You must have access to the specified bay number. Example OA-0018FE27577F> show server info all Server Blade #1 Information: Type: Server Blade Manufacturer: HP Product Name: ProLiant BL480c G1 Part Number: 416667-B21 System Board Spare Part Number: 410293-001 Serial Number - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 101
:35:F6:42 Power Management Controller Version: Not Available Server Blade #3 Information: Server Blade Type: No Server Blade Installed Server Blade #4 Information: Type: Server Blade Manufacturer: HP Product Name: ProLiant BL460c G1 Part Number: 404664-B21 System Board Spare Part Number: 410299-001 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 102
blades to which the current user has access • Access level/Bay level: Administrator, operator Bay specific • Restrictions: You must have access to the specified bay number 12.345.67.890 OK 8 Storage Blade N/A OK Totals: 4 server blades installed, 4 powered on. Pwr UID Partner On Off On - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 103
Totals: 3 server blades installed, 3 powered on. SHOW SERVER PORT MAP • Command: SHOW SERVER PORT MAP {ALL | ]} • Description: Displays the port mapping for the server specified by the bay number • Access level/Bay level: Administrator, operator Bay specific • Restrictions - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 104
0 4 ProLiant BL460c G1 number bay number>]} • Description: Displays the following settings of server blade: o Power (OK or off) o Health (OK, CPU failure, or power module failure) o Thermal (OK, warm, caution, or critical) o UID LED • Access level/Bay level: All Bay specific • Restrictions: Blade - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 105
Device Degraded OK iLO Network OK Blade #2 Status: Power: On Current Wattage used: 360 Internal Health: OK System Health: Degraded Unit Identification LED: Off Diagnostic Status: Internal Data OK Management Processor OK I/O Configuration OK Power OK Cooling OK Location OK Device - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 106
: Displays the syslog for the specified server blade • Access level/Bay level: Administrator, operator Bay specific • Restrictions: o You must have access to the specified bay number. o This command is not applicable to HP Integrity server blades. Example OA-0018FE27577F> show syslog server - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 107
INITIAL_UPDATE="10/08/2007 13:54" COUNT="1" DESCRIPTION="Server Blade Enclosure LAN Settings Changed (Enclosure Serial Num ber shorty-lab)" /> --More-- UNASSIGN SERVER • Command: UNASSIGN SERVER {ALL | ]} {"" | LDAP GROUP ""} • Description: Removes - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 108
None Blade management commands 108 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 109
Command: CLEAR INTERCONNECT SESSION • Description: Terminates a serial console session of a user on an interconnect. The termination is not graceful and the user loses any unsaved work. • Access level/Bay level: Administrator, operator Bay specific • Restrictions: You must have explicit - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 110
ASSIGN INTERCONNECT command. POWERON INTERCONNECT • Command: POWERON INTERCONNECT {ALL | ]} • Description: Powers on the specified interconnect • Access level/Bay level: Administrator, operator Bay specific • Restrictions: You must have explicit access to a bay given by the - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 111
on the device. If the delay is NOPOWERON, the device cannot power on until all devices have completed their delays. • Access level/Bay level: Administrator Bay specific • Restrictions: You must have access to the specified bay number. SET INTERCONNECT UID • Command: SET INTERCONNECT UID {ALL | - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 112
Product Name: GbE2c Ethernet Blade Switch Width: Single URL to Management interface: In-Band IPv4 Address: 16.84.189.81 User Assigned Name: Part Number: 410917-B21 Spare Part Number: 414037-001 Serial Number Present 2. Ethernet Product Name: HP 1/10Gb VC-Enet Interface: Absent Firmware Version: 2.00 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 113
by the bay number • Access level/Bay level: All Bay specific • Restrictions: You must have explicit access to a bay given by the ASSIGN INTERCONNECT command. Example OA-0018FE27577F> SHOW INTERCONNECT PORT MAP ALL 1: Cisco Catalyst Blade Switch 3120X for HP w/ IP Base Type: Ethernet Width - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 114
number> | -} • Description: Displays interconnect status information; UID state and health state • Access level/Bay level: All Bay specific Powered: On Diagnostic Status: Internal Data OK Management Processor OK Thermal Warning OK Thermal Danger OK I/O Configuration - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 115
Interconnect Module Type: No Interconnect Module Installed Interconnect Module #3 Status: Interconnect Module Type: No Interconnect Module Installed Interconnect Module #4 Status: Interconnect Module Type: No Interconnect Module Installed Interconnect management commands 115 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 116
the DVD connection status for the specified server or range of servers • Access level/Bay level All Bay specific • Restrictions: You must have access to the specified bay number. Example OA-0018FE27577F> SHOW SERVER DVD ALL DVD Drive: Present DVD Media: Present Server DVD connections: Bay - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 117
5 6 7 No 8 - [Bay empty] [Bay empty] [Non-server blade] Enclosure DVD commands 117 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 118
REMOTE • Command: ENABLE SYSLOG REMOTE • Description: Enables remote system logging • Access level/Bay level: OA administrator • Restrictions: SET REMOTE SYSLOG PORT • Description: Set the IP port number for remote system log. Setting the remote port is optional. If it is not set, the default - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 119
this command. Example OA-0018FE27577F> SHOW SYSLOG SETTINGS Remote log: Disabled Address: Port: 514 TEST SYSLOG • Command: TEST SYSLOG • Description: Tests the remote system log settings by logging a test message to the syslog. The test message will also appear in the local OA administrator - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 120
of a date and time stamp, the Onboard Administrator IP address, text, and a priority number. The date and time stamp, and the text match the Onboard Administrator syslog entry. Sep 9 16:00:28 10.128.126.204 OA: Remote system logging enabled to server 16.83.33.81, port 514 (priority 13) Remote - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 121
DOWNLOAD CONFIG using USB key • Command: DOWNLOAD CONFIG • Description: Downloads a saved configuration file from a specific IP host. The file is not checked for errors but is automatically executed in SCRIPT MODE. Supported protocols are HTTP, FTP, TFTP, and USB. Format the as protocol - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 122
OA-00215AB195CB> show usbkey Firmware Image Files usb://d1/hpoa225.bin Configuration Script Files usb://d1/ firmware. If a redundant Onboard Administrator is present in the system, this command flashes and validates its firmware before attempting to flash the Active Onboard Administrator. Supported - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 123
formatted as: protocol://host/path/filename. If your FTP server does not support anonymous logins, you can specify a user name and password within the URL formatted as: ftp://username:password@host/path/filename. To save a configuration file to a USB key, use the USB command and provide a filename - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 124
ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE [NONE | }] • Description: Specifies bays to omit from Enclosure Dynamic Power Cap. Blades in omitted bays are treated as unmanaged components of the system: They receive a maximum power allocation even when the power is not being consumed - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 125
• Command: SHOW ENCLOSURE POWER_CAP_BAYS_TO_EXCLUDE • Description: Displays the bays in the enclosure that are exempt from the Enclosure Dynamic Power Cap. • Access level/Bay level: All • Restriction: None Example OA-0018FE27577F> show enclosure power_cap_bays_to_exclude Bays opted out: None - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 126
are: • The enclosure is in a degraded state. • Blade X has experienced a failure. • The temperature on Blade X has exceeded the failed threshold. • Fan X has experienced a failure. • The power supplies are no longer redundant. • Power supply X is in a degraded state. • The enclosure temperature has - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 127
of a power supply has changed. Power Supply Inserted A power supply has been inserted. Power Supply Removed A power supply has been removed. Power Supply Redundancy Change The power supplies are either now redundant or are no longer redundant. Power Supply Overload The power supplies are - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 128
Onboard Administrator. If you are logged in as this user, you are disconnected from the Onboard Administrator. A user was disabled. If you are logged in as this user, you are disconnected from the Onboard Administrator. The privilege level of a user on the Onboard Administrator was changed. If you - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 129
before you call HP: • Technical support registration number (if applicable) • Product serial number • Product model name and number • Product identification number • Applicable error messages • Add-on boards or hardware • Third-party hardware or software • Operating system type and revision - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 130
time zone settings IMPORTANT: Time zones must be entered exactly as they appear. The following table provides the Universal time zone settings that are supported by the Onboard Administrator. CET CST6CDT Etc/GMT-2 Etc/GMT+2 Etc/GMT+7 Etc/GMT-8 Etc/GMT-13 Etc/GMT-14 MST MST7MDT EET Etc - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 131
Time zones must be entered exactly as they appear. The following table provides the Americas time zone settings that are supported by the Onboard Administrator. America/Adak America/Anchorage America/Anguilla America/Indiana/Knox America/Indiana/Marengo America/Indianapolis America/Santo_Domingo - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 132
settings IMPORTANT: Time zones must be entered exactly as they appear. The following table provides the Asian time zone settings that are supported by the Onboard Administrator. Asia/Aden Asia/Almaty Asia/Amman Asia/Anadyr Asia/Aqtau Asia/Aqtobe Asia/Ashgabat Asia/Ashkhabad Asia/Damascus Asia - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 133
: Time zones must be entered exactly as they appear. The following table provides the Oceanic time zone settings that are supported by the Onboard Administrator. Atlantic/Azores Atlantic/Bermuda Atlantic/Canary Atlantic/Cape_Verde Australia/NSW Australia/Perth Australia/Queensland Australia/South - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 134
: Time zones must be entered exactly as they appear. The following table provides the European time zone settings that are supported by the Onboard Administrator. Eire Europe/Amsterdam Europe/Andorra Europe/Athens Europe/Belfast Europe/Belgrade Europe/Berlin Europe/Bratislava Europe/Brussels - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 135
processing unit DDNS Dynamic Domain Name System DHCP Dynamic Host Configuration Protocol DNS domain name system EBIPA Enclosure Bay IP Addressing FRU field replaceable unit FTP file transfer protocol GUI graphical user interface HP SIM HP Systems Insight Manager Acronyms and abbreviations 135 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 136
Internet Protocol LDAP Lightweight Directory Access Protocol LED light-emitting diode MAC Media Access Control NIC network interface controller NTP network time protocol OS operating system PDU power distribution unit PKCS Public-Key Cryptography Standards Acronyms and abbreviations 136 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 137
PXE Preboot Execution Environment RBSU ROM-Based Setup Utility RIBCL Remote Insight Board Command Language SNMP Simple Network Management Protocol SOAP Simple Object Access Protocol SSH Secure Shell SSO single sign-on TFTP Trivial File Transfer Protocol UID - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 138
20 adding a user account 20 Africa time zone 130 Americas time zone 131 Asia time zone 132 ASSIGN 20 ASSIGN FOR LDAP 31 ASSIGN INTERCONNECT 109 ASSIGN OA 21 ASSIGN OA LDAP GROUP 32 authorized reseller 129 B Blade management commands 95 C CLEAR INTERCONNECT SESSION 109 CLEAR NTP 54 CLEAR SCREEN 16 - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 139
61 command, REMOVE TRUSTED HOST 62 command, REMOVE USER 22 command, REMOVE USER CERTIFICATE 29 command, RESTART OA 71 command, SET OA USB 75 command, SET PASSWORD 23 command, SET POWER LIMIT 75 command, SET POWER MODE 75 command, SET POWER SAVINGS 76 command, SET RACK NAME 18 command, SET - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 140
79 command, SHOW DEVICE SERIAL NUMBER BLADE 48 command, SHOW DISPLAY SHOW TWOFACTOR INFO 30 command, SHOW USBKEY 121 command, SHOW USER 26 command, SHOW VCMODE 92 command, SLEEP 27 command, TEST CONNECT SERVER 95 D DHCP (Dynamic Host Configuration Protocol) 11 DHCP addresses 11 Directory (LDAP - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 141
USER 22 ENABLE XMLPREPLY 61 Enclosure Bay IP Addressing (EBIPA) commands 49 enclosure DVD commands 116 enclosure information 126 enclosure management commands 70 Enclosure network configuration commands 53 error messages 126 errors, fan 126 errors, power supply failure 126 errors, server blade - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 142
64 SET OA USB 75 SET PASSWORD 23 SET POWER LIMIT 75 SET POWER MODE 75 SET POWER SAVINGS 76 SET RACK NAME 18 SET REMOTE SYSLOG USER ACCESS 24 SET USER CONTACT 24 SET USER FULLNAME 24 SET USER PASSWORD 25 SHOW ALL 45 SHOW CA CERTIFICATE 29 SHOW CONFIG 76 SHOW DATE 79 SHOW DEVICE SERIAL_NUMBER BLADE - HP Xw460c | HP BladeSystem Onboard Administrator Command Line Interface User Gui - Page 143
SHOW SYSLOG SERVER 106 SHOW SYSLOG SETTINGS 119 SHOW TOPOLOGY 18 SHOW TWOFACTOR INFO 30 SHOW USBKEY 121 SHOW USER 26 SHOW VCMODE 92 SLEEP 27 SSH session 9 syntax 126 T technical support 129 telnet session 9 terminal emulator session 9 TEST ALERTMAIL 69 TEST LDAP 37 TEST SNMP 69 TEST SYSLOG 119 time
HP BladeSystem Onboard Administrator
Command Line Interface
User Guide
Version 2.60
Part Number 416217-403
September 2009 (Twelfth Edition)