HP Xw8200 PCI-Express Graphics Products
HP Xw8200 - Workstation - 1 GB RAM Manual
 |
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xw8200 manual content summary:
- HP Xw8200 | PCI-Express Graphics Products - Page 1
BIOS and driver updates from the support website for your workstation (for example, www.hp.com/support/xw8200). 2. After installing the updates, disconnect power the keyed components of the card align with the socket. 7. Close the PCI levers 4. 8. If required, connect the power supply cable 5. 1 - HP Xw8200 | PCI-Express Graphics Products - Page 2
9. If your card has a hold down, install it to limit the movement of the card when the workstation is being moved. The following illustrations show the installation of some typical card hold downs. xw4200 Card xw6200 Short Card xw6200 Tall Card xw8200 Card 2 - HP Xw8200 | PCI-Express Graphics Products - Page 3
PCI-Express 3 世代 （3GIO） PCI-Express （PCI-E PCI-Express x16 I/O PCI-Express は PCI、PCI-X AGP I/O PCI-Express は、 1 対 1 PCI-Express PCI-Express PCI-Express 1 BIOS Web www.hp.com/support/xw8200 2 3 4. PCI 1。 5 PCI 2。 1 2 4 3 5 6. PCI-Express 3 7. PCI 4。 8 5。 3 - HP Xw8200 | PCI-Express Graphics Products - Page 4
9 xw4200 xw6200 xw6200 364897-002 4 xw8200 © 2004 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered trademark of Hewlett-Packard Development Company, L.P.
-
1 -
2 -
3 -
4
 |
 |
1
PCI-Express Graphics Products
This graphics card uses the third generation (3GIO) PCI-Express (PCI-E) hardware interconnect standard.
It is designed to work using your system’s PCI-Express x16 I/O slot.
PCI-Express is the successor of the PCI, PCI-X, and AGP I/O standards. PCI-Express delivers greater
bandwidth and performance using a point-to-point high-speed serial link technology. PCI-Express
architecture is stable, scalable, and extensible.
Installing your PCI-Express Graphics Card
To install your PCI-Express graphics card:
1.
Download the latest BIOS and driver updates from the support website for your workstation (for
example,
www.hp.com/support/xw8200
).
2.
After installing the updates, disconnect power from the system, remove the hood cover, and lay the
workstation on its side with the system board facing up.
3.
If necessary, remove any card hold downs.
4.
Release the PCI levers by first pressing down on them and then out
1
.
5.
If necessary, remove the applicable PCI slot cover(s)
2
.
6.
Install the PCI-E card
3
. Verify that the keyed components of the card align with the socket.
7.
Close the PCI levers
4
.
8.
If required, connect the power supply cable
5
.
1
2
3
4
5