HP Xw8200 Optical Drive Installation
HP Xw8200 - Workstation - 1 GB RAM Manual
UPC - 882780210455
View all HP Xw8200 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Xw8200 manual content summary:
- HP Xw8200 | Optical Drive Installation - Page 1
how to install an optical drive on an HP Workstation. Electrostatic Discharge A discharge of static electricity from workstations. Wear the straps on both feet when standing on conductive floors or dissipating floor mats. ■ Use conductive field service tools. ■ Use a portable field service - HP Xw8200 | Optical Drive Installation - Page 2
driver or flat-bladed screwdriver NOTE: On some workstations, optical drives are mounted using M3 metric guide screws. These workstations come with extra metric guide access panel. HP-supplied metric screws are black. On other workstations, the optical drives do not require these guide screws. - HP Xw8200 | Optical Drive Installation - Page 3
object or liquid falls into the cabinet, immediately unplug the workstation and have it checked by an authorized service provider. ■ When a disc is not in use, the Workstation For detailed instructions on the following operations, refer to the documentation that came with the workstation. 1. - HP Xw8200 | Optical Drive Installation - Page 4
avoid touching any exposed metal on the option board/chip or on the workstation's circuit boards. Refer to the "Regulatory Notices" section later in remove the EMI filler. 4. If your optical drive requires guide screws, remove four M3 guide screws from the chassis behind the bezel (or from the - HP Xw8200 | Optical Drive Installation - Page 5
drive in. Ä CAUTION: Ensure that the optical drive has been properly secured. Failure to do so may cause damage to the drive when moving the workstation. NOTE: Refer to the documentation included with your workstation for specific instructions on securing an optional drive. 5 - HP Xw8200 | Optical Drive Installation - Page 6
that shipped with your system for the appropriate location. For Microsoft Windows systems, this cable is optional as Digital Audio can be enabled reconnecting any peripheral devices to the workstation. Enabling Digital Audio If the system is using Windows 2000 or Windows XP, enable the audio as - HP Xw8200 | Optical Drive Installation - Page 7
the optical drive is reading information from the disc. Opens the disc tray manually. Holds the disc. Opens and closes the disc tray. NOTE: The drive and drive controls may not be identical to those shown. Opening the Tray Manually If you have exited the CD application and are unable to eject the - HP Xw8200 | Optical Drive Installation - Page 8
that came with your workstation for additional regulatory information governing this product. 365578-001 © 2004 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered trademark of Hewlett-Packard Development Company, L.P. Microsoft and Windows are U.S. registered trademarks - HP Xw8200 | Optical Drive Installation - Page 9
HP Workstation HP 1 1MΩ ± 10 HP HP 9 - HP Xw8200 | Optical Drive Installation - Page 10
5.25 1/2 IDE M3 4 T-15 M3 HP 注意事項 CD CD CD CD CD CD CD CD 10 - HP Xw8200 | Optical Drive Installation - Page 11
CD 1 CD AC HP CD CD CD CD 1 2 3. AC 4 11 - HP Xw8200 | Optical Drive Installation - Page 12
1 2 Ä 2 3. EMI 4 M3 4 12 - HP Xw8200 | Optical Drive Installation - Page 13
5 M3 2 xw6200 や xw8200 6 13 - HP Xw8200 | Optical Drive Installation - Page 14
7 注記 : Linux CD Microsoft Windows IDE IDE 8 Windows 2000 ま たは Windows XP 1 2 3. [DVD/CD-ROM 14 - HP Xw8200 | Optical Drive Installation - Page 15
4 CD-ROM 5 CD-ROM CD 6. [OK 15 - HP Xw8200 | Optical Drive Installation - Page 16
項目 名称 1 2 3 CD 4 機能 CD CD CD CD CD 1 1.6 34.9 2 3 16 - HP Xw8200 | Optical Drive Installation - Page 17
IDE IDE ATA 0 1 IDE 項目 機能 1 0 2 1 3 VCCI B CD 365578-001 © 2004 Hewlett-Packard Development Company, L.P. The HP Invent logo is a registered trademark of Hewlett-Packard Development Company, L.P. Microsoft Windows Microsoft Corporation Linux Linus Torvalds 17 - HP Xw8200 | Optical Drive Installation - Page 18
18
1
Optical Drive Installation
for HP Workstations
This document describes how to install an optical drive on an HP Workstation.
Electrostatic Discharge
A discharge of static electricity from a finger or other conductor may damage system boards or other
static-sensitive devices. This type of damage may reduce the life expectancy of the device.
Preventing Electrostatic Damage
To prevent electrostatic damage, observe the following precautions:
■
Avoid hand contact by transporting and storing parts in static-safe containers.
■
Keep electrostatic-sensitive parts in their containers until they arrive at static-free workstations.
■
Place parts on a grounded surface before removing them from their container.
■
Avoid touching pins, leads, or circuitry.
■
Always be properly grounded when touching an electrostatic-sensitive component or assembly.
Grounding Methods
There are several methods for grounding. Use one or more of the following measures when handling or
installing electrostatic- sensitive parts:
■
Use a wrist strap connected by a ground cord to a grounded workstation chassis. Wrist straps are
flexible straps with a minimum of 1 meg. ohm +/- 10 percent resistance in the ground cords. To
provide a proper ground, wear the strap snug against the skin.
■
Use heelstraps, toestraps, or bootstraps at standing workstations. Wear the straps on both feet when
standing on conductive floors or dissipating floor mats.
■
Use conductive field service tools.
■
Use a portable field service kit with a folding static-dissipating work mat.
If you do not have any of the suggested equipment for proper grounding, have an authorized dealer,
reseller, or service provider install the part.
NOTE:
For additional information on static electricity or for assistance with the installation of this
product, contact an authorized dealer, reseller, or service provider.