HP Z2100 HP Designjet Z2100 Printing Guide - Add and profile a new paper type - Page 6
Calibrate Your Printer >, Print Profiling Chart and Install ICC profile >, the paper type
 |
UPC - 882780654006
View all HP Z2100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
• Load your new paper into the printer (A4/A size minimum). • Click Next. Calibrate Your Printer > The printer will calibrate itself for use with your paper. The process takes about 10 minutes and consists of the following steps: 1. A calibration test chart is printed. 2. The test chart is allowed to dry for a period of time, the amount of time will depend on the paper type, this is so that the colors have time to stabilize. 3. The test chart is scanned and measured using the HP Embedded Spectrophotometer. Print Profiling Chart and Install ICC profile > Once the printer calibration is complete, load your new paper again into the printer (A3/B size). The following message will prompt for paper if it is not loaded: 6
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8 -
9
 |
 |
•
Load your new paper into the printer (A4/A size minimum).
•
Click
Next
.
Calibrate Your Printer >
The printer will calibrate itself for use with your paper. The process takes about 10 minutes
and consists of the following steps:
1.
A calibration test chart is printed.
2.
The test chart is allowed to dry for a period of time, the amount of time will depend on
the paper type, this is so that the colors have time to stabilize.
3.
The test chart is scanned and measured using the HP Embedded Spectrophotometer.
Print Profiling Chart and Install ICC profile >
Once the printer calibration is complete, load your new paper again into the printer (A3/B
size).
The following message will prompt for paper if it is not loaded:
6