HP Z3200 HP Designjet Z3200 Photo Printer Series - Setup Poster [English]
HP Z3200 - DesignJet Color Inkjet Printer Manual
UPC - 884420403371
View all HP Z3200 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP Z3200 manual content summary:
- HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 1
1.2 set up troja Asia NEW.indd 1 HP Designjet Z2100, Z3200 and Z3200ps Photo Printer Series Assembly Instructions © 2008 Hewlett-Packard Company Inkjet Commercial Division Avenida Graells 501 · 08174 Sant Cugat del Vallès Barcelona · Spain All rights reserved Printed in Germany · Imprimé en - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 2
one. To do so you may need two people, one at each end. 5 Remove the pieces of cardboard. 6 Remove the roll of paper. 7 Remove the rear tray from the printer. Note: If you don't find the tray in the box, it may already be installed. 8 Lift up the sides and top of - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 3
the floor, spaced 40 cm apart, and place the cross-brace on top of them. 13 A screwdriver and 22 screws are provided in the stand box: 16 screws to assemble the stand, 4 to attach it to the printer, and 2 are spare. Do not try to remove the washers from the screws. Note - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 4
the desiccant bag from the top of the printer. 21 Lift the stand, keeping it upside down. 22 printer. 23 Place the stand on the printer slowly and carefully, so that the colored buttons on the legs fit into the corresponding holes in the printer. Notice that the printer body is upside down. 24 - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 5
may break. 29 If necessary, rotate the wheel. 30 The lock on each wheel should be facing inwards (away from the floor). 24:60kg 44:80kg 31 Now hold the printer by the foam end pieces and by the center rear, and continue to rotate it until it stands on its feet, all - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 6
on each foot. 39 Rest the basket's rear tube on the supports that you have just fitted to each leg of the stand. 40 The basket is now complete. 41 Remove the orange tape from the printer window. 42 Open the window (printer's top cover). 1.2 set up troja Asia NEW.indd 6 26/06 - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 7
support attached to the printer with tape. Remove the tape. 44 Turn the cardboard support 90° to the right. 45 Lift the cardboard support up and out of the printer by lifting the lever wrapped with light blue paper, then remove the stopper from the printer. 47 Part of the stopper may fall off - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 8
, it prompts you to install the ink cartridges. 56 Open the cover on the right-hand side of the printer. 57 Shake each ink cartridge for about 10 seconds before unwrapping it. 58 Insert the ink cartridges one by one. Each cartridge is marked with its own color, and should be inserted only into - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 9
Install the printheads 59 The cartridges must be inserted the right way around: the ink outlet in the cartridge should meet the ink inlet in the slot. Push the cartridge into the slot until it clicks into place. The printer beeps whenever a cartridge is successfully inserted. 60 When you have - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 10
before unwrapping it. This will reduce the time the printer takes to check the printheads later. 69 After shaking, unwrap each printhead. 70 Remove all orange parts. 71 Insert the printheads one by one. Each printhead is marked with its own colors, and should be inserted only into the correct - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 11
computer. Be sure to follow the software installation instructions. Connecting your printer before installing the software can lead to printer errors. 76 Once the printhead check has finished the printer will be ready to load paper for the printhead alignment. 77 When the front panel prompts you - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 12
in the printer. Color calibration is recommended for accurate color printing. It can be started from the Printer Utility program installed as part of your printer software, or from the front panel's Image Quality Maintenance menu. 86 1- View ink levels 2- View loaded paper 3- Unload paper 4- Form - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 13
follow the on-screen instructions. Note: if you have an HP Designjet Z2100 or Z3200 we recommend that you select 'Easy Install' to install all elements. If you have an HP Designjet Z3200ps we recommend that you select 'Easy Install' to install the PostScript driver and the HP Printer Utility. If you - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 14
follow the on-screen instructions. Note: if you have an HP Designjet Z2100 or Z3200 we recommend that you select 'Easy Install' to install all elements. If you have an HP Designjet Z3200ps we recommend that you select 'Easy Install' to install the PostScript driver and the HP Printer Utility. If you - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 15
CD. 4. Choose the next step depending on the model of your printer: a) (HP Designjet Z2100) Click Install. b) (HP Designjet Z3200/Z3200ps) Click Express Network Install. 5. Follow the instructions on your screen to set up the printer. The following notes will help you to understand the screens and - HP Z3200 | HP Designjet Z3200 Photo Printer Series - Setup Poster [English] - Page 16
-by-step software interface-no extra manuals needed. The HP Advanced Profiling Solution is an optional accessory if you have an HP Designjet Z2100 or Z3200 Photo Printer; it is supplied in the box if you have an HP Designjet Z3200ps Photo Printer. It is fully supported by HP, so you do not need to
Read these instructions carefully...
What you will need for this
procedure
• Because the printer is heavy, you may
need three people to unpack it. When
more than one person is needed, this
symbol is displayed.
• To assemble the printer you will need at
least 1 x 2 m (40 x 80 in) of empty floor
space.
*Whenever you see this icon, you can find
an animation illustrating the procedure on
the HP Start-Up Kit DVD.
Printer working area
Before you start unpacking, consider where
you are going to put the assembled printer.
You should allow some clear space on all
sides of the printer box. The recommended
clearances are shown in the illustration
above.
Note: If your printer is 24-in without
stand, remove the printer box
and the accessories box, place
the printer on a table and remove
the desiccant bag from below the
printer. Then go to step 32.
HP Designjet
Z2100, Z3200 and
Z3200ps
Photo Printer Series
Assembly Instructions
© 2008 Hewlett-Packard Company
Inkjet Commercial Division
Avenida Graells 501 · 08174
Sant Cugat del Vallès
Barcelona · Spain
All rights reserved
Printed in Germany · Imprimé en Allemagne · Stampato in Germania
1
2
*
1.2 set up troja Asia NEW.indd
1
26/06/2008
11:16:04 AM