HP t5710 Hardware Reference Guide HP Compaq t5000 Thin Client
HP t5710 - Thin Client Manual
 |
View all HP t5710 manuals
Add to My Manuals
Save this manual to your list of manuals |
HP t5710 manual content summary:
- HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 1
Hardware Reference Guide HP Compaq t5000 Thin Client Document Part Number: 334457-004 February 2005 This book provides basic hardware information for this series of thin clients. - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 2
Windows, and Windows NT are trademarks of Microsoft Corporation in the U.S. and other countries. The only warranties for HP products and services information. Hardware Reference Guide HP Compaq t5000 Thin Client Third Edition (February 2005) First Edition (May 2003) Document Part Number: 334457-004 - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 3
2-1 Removing and Replacing the Side Access Panel 2-3 Installing Thin Client Options 2-4 Flash Memory 2-5 SODIMM Upgrade 2-6 PCI Expansion Module 2-7 Internal Battery 2-10 MultiBay Hard Drive and Diskette Drive 2-10 A Specifications B Security Provisions Securing the Thin Client B-1 Mounting - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 4
Contents Grounding Methods C-2 D Routine Thin Client Care and Shipping Information Routine Thin Client Care D-1 Shipping Preparation D-2 Important Service Repair Information D-2 Index iv www.hp.com Hardware Reference Guide - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 5
common to all HP thin clients: ■ no moving parts ■ no hard drives or diskette drives (optional MultiBay hard drive and diskette drive available for select models) ■ 15-minute setup time ■ while software support is limited to 90 days from date of purchase, free periodic firmware upgrades during the - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 6
Connector* 3 Parallel Connector* 8 Power Connector 4 Universal Serial Bus (USB) Connectors (4) 9 Monitor Connector 5 Line-in Audio Connector (Microphone) : Serial Connector* * Not available on all models. Refer to the model-specific QuickSpecs at http://h18000.www1.hp.com/products/quickspecs - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 7
-specific QuickSpecs at http://h18000.www1.hp.com/products/quickspecs/Division/ 10447.html for details. ✎ Not all HP Compaq t5000 thin client models are flash memory, SODIMMs, and/or PCI Expansion Module upgradeable. ✎ 32 MB of system RAM is reserved for processor usage. Hardware Reference Guide - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 8
. 4 Ctrl key Used in combination with another key; its effect depends on the application software you are using. 5 Windows Logo Key1 Used to open the Start menu in Microsoft Windows. Used in combination with other keys to perform other functions. (See the following section.) 1 Keys available in - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 9
the Thin Client. 1 Keys available in select geographic regions. Windows Logo Key Use the Windows Logo Key in combination with other keys to perform certain functions available in the Windows operating systems. ✎ The Windows Logo Key is not supported on Linux-based systems. Windows Logo Key - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 10
HP Compaq t5000 thin client models: With Microsoft Windows XPe support the use of a mouse. The functions assigned to each mouse button depend on the software applications you are using. ✎ All HP Compaq t5000 thin client models ship with a USB scroll mouse. 1-6 www.hp.com Hardware Reference Guide - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 11
Serial Number Location Each thin client has a unique serial number which is located on the the thin client as shown in the following illustration. Keep this number available for use when contacting HP customer service for assistance. Serial Number Location Hardware Reference Guide www.hp.com 1-7 - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 12
Product Features 1-8 www.hp.com Hardware Reference Guide - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 13
2 Hardware Upgrades General Hardware Installation Sequence To ensure the proper installation of any thin client hardware option: 1. Back up any data if necessary. 2. If the thin client is on: a. Shut the unit down. b. Turn the unit and any other attached devices off. c. Disconnect the power cord - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 14
❏ Flash Memory on page 2-5 ❏ SODIMM Upgrade on page 2-6 ❏ PCI Expansion Module on page 2-7 ❏ MultiBay Hard Drive and Diskette Drive on page 2-10 ✎ More detailed instructions for installing thin client options are included in the option kits. If it is necessary to replace the internal battery, refer - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 15
Hardware Upgrades Removing and Replacing the Side Access Panel To install internal hardware options, you must remove the side access panel and chassis cover as shown below. Å WARNING: Before removing the side access panel, ensure that the thin client is turned off and that the power cord is - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 16
are supported and to order available options. The following sections contain general installation instructions for some of the available options. In all cases, see the specific installation instructions that came with the thin client option. Before beginning the installation process, review the - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 17
Hardware Upgrades Flash Memory If the thin client can be upgraded with optional flash memory, use the following instructions as an overview of this procedure. Ä CAUTION: If necessary, back up any data before continuing the installation. ✎ In addition to following these instructions, follow the - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 18
Hardware Upgrades 6. Restore power to the thin client and turn it on. 7. Install the thin client firmware. For installation instructions, refer to the Troubleshooting Guide or the HP Compaq Thin Client Imaging Tool white paper available on the HP website at www.hp.com/products/thinclientsoftware. - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 19
Upgrades PCI Expansion Module If the thin client supports an optional PCI Expansion Module, follow the instructions included in the option kit. The PCI Expansion Module option kit includes the following components: ■ PCI riser card ■ PCI Expansion Module metal chassis cover (with speaker) ■ PCI - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 20
Hardware Upgrades 3. Connect the speaker cable from the PCI Expansion Module chassis cover to the system board. Connecting the Speaker 4. Install the PCI card 1 into the optional PCI riser card as shown in the following figure. 5. Install the optional PCI Expansion Module chassis cover 2. 6. - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 21
screws 2 as shown in the following illustration. Installing PCI Expansion Module Side Access Panel 9. Complete steps 6 through 10 of the "General Hardware Installation Sequence" on page 2-1. To remove the PCI Expansion Module, reverse the previous steps. Hardware Reference Guide www.hp.com 2-9 - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 22
available as options on select thin client models. These are external USB compatible drives. For additional installation information about these drives visit www.hp.com/products/thinclientsoftware or refer to the instructions that accompany these option. 2-10 www.hp.com Hardware Reference Guide - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 23
A Specifications HP Compaq t5000 thin client Dimensions Height Width Depth Approximate Weight Temperature Range (fanless design)* Operating (max. rate of change is 10° C per hour or 18° F per hour) Nonoperating (max. rate of change is 20° C per hour or 36° F per hour) *Specifications are at sea - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 24
Specifications Maximum Altitude (unpressurized) Operating (max. allowed rate of change is 457m per minute or 1500 ft per minute) Nonoperating (max. allowed rate of change is 457m per minute or 1500 ft per minute) *Value may be limited by type and number of options installed. Power Supply Operating - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 25
B Security Provisions Securing the Thin Client The HP Compaq t5000 thin client models are designed to accept a security cable lock. A separate security cable lock option is available for thin clients. This cable lock prevents the thin client from being removed from its location. To order this option - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 26
/products/thinclients/ options/index.html. Mounting Bracket for the Thin Client Ä CAUTION: When using the t5710 1.2 GHz models (P/N PY704AA, PY705AA, or PY706AA ) with the PCI expansion module the unit must be mounted and operated in the vertical position. B-2 www.hp.com Hardware Reference Guide - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 27
until they arrive at static-free workstations. ■ Place parts on a grounded surface before removing them from their containers. ■ Avoid touching pins, leads, or circuitry. ■ Always be properly grounded when touching a static-sensitive component or assembly. Hardware Reference Guide www.hp.com C-1 - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 28
methods for grounding. Use one or more of the following methods when handling or installing electrostatic-sensitive parts: ■ Use a wrist strap connected by a ground cord to a grounded Thin Client chassis. Wrist straps are flexible straps with a minimum of 1 megohm +/- 10 percent resistance in - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 29
and cold. For information about the recommended temperature and humidity ranges for the thin client, see Appendix A, "Specifications" in this guide. ■ Keep liquids away from the thin client and keyboard. ■ Turn off the thin client before you do either of the following: ❏ Wipe the exterior of the - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 30
HP with the same internal memory and flash modules that were sent. In countries that do not support customer mail-in repair by returning the same unit to the customer, all internal options should be removed and safeguarded in addition to the external options. The thin client should be restored - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 31
specifications A-1 upgrades 2-1 headphone connector 1-2 I installation sequence 2-1 Hardware Reference Guide installing flash memory 2-5 memory 2-6 MultiBay diskette drive 2-10 MultiBay hard drive 2-10 K keyboard 1-4 function keys 1-6 layout 1-4 Windows logo key 1-5 L line-in audio connector - HP t5710 | Hardware Reference Guide HP Compaq t5000 Thin Client - Page 32
Index PCI Expansion Module installing 2-7 kit contents 2-7 removing 2-9 R rear panel components 1-2 removing PCI Expansion Module 2-9 side access panel 2-3 SODIMMs 2-6 RJ-45 connector 1-2 routine care D-1 S security provisions B-1 serial connector 1-2 serial number 1-7 service repair D-2 shipping
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
 |
 |
Hardware Reference Guide
HP Compaq t5000 Thin Client
Document Part Number: 334457-004
February 2005
This book provides basic hardware information for this series of thin
clients.