Hitachi 46GX01B Owners Guide

Hitachi 46GX01B Manual

Hitachi 46GX01B manual content summary:

  • Hitachi 46GX01B | Owners Guide - Page 1
    IMPORTANT PROJECTION COLOR TV 46GX01B 50GX20B OPERATING GUIDE TABLE OF CONTENTS IMPORTANT ...2 SAFETY TIPS...4 PICTURE CAUTIONS ...8 ACCESSORIES...8 REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT 8 HOW TO SET UP YOUR NEW HITACHI PROJECTION TV 10 HOOK-UP CABLES AND CONNECTORS ...12 FRONT
  • Hitachi 46GX01B | Owners Guide - Page 2
    . NOTE: • There are no user serviceable parts inside the television. • Model and serial numbers are indicated on back side of the television. • This television is not intended for use in a computer room. CAUTION: Adjust only those controls that are covered in the instructions, as improper changes or
  • Hitachi 46GX01B | Owners Guide - Page 3
    IMPORTANT paragraph 15.119 of the FCC rules. CAUTION: Never remove the back cover of the television as this can expose you to very high voltages and other hazards. If the television does not operate properly, unplug the television and call your authorized dealer or service shop. 3
  • Hitachi 46GX01B | Owners Guide - Page 4
    ABOUT YOUR HITACHI PROJECTION TELEVISION CAUTION: • Read all of these instructions. • Save these instructions for later use. • Follow all warnings and instructions marked on the television. Our reputation has been built on the quality, performance, and ease of service of HITACHI televisions. Safety
  • Hitachi 46GX01B | Owners Guide - Page 5
    , or sold with the television. Wall or shelf mounting should follow the Wall/Shelf mounting manufacturer's instructions, and should use a television from wall outlet and refer to qualified service personnel. 13 Choose a place where light (artificial or sunlight) does not shine directly on the screen
  • Hitachi 46GX01B | Owners Guide - Page 6
    electrode, and requirements for the grounding electrode. EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS. 16-2 Note to CATV system installer: (Only for television with CATV reception) This reminder is provided to call the CATV system installer's attention to Article
  • Hitachi 46GX01B | Owners Guide - Page 7
    to operate from battery power, refer to the operating instructions. 20 If the television does not operate normally by following the operating instructions, unplug the television from the wall outlet and refer servicing to qualified service personnel. Adjust only those controls that are covered in
  • Hitachi 46GX01B | Owners Guide - Page 8
    cause permanent damage to projection television receivers. Such "PATTERN BURNS" constitute misuse and are NOT COVERED by your HITACHI Factory Warranty. • When using Picture-in-Picture function, the sub-picture should not be left permanently in one corner of the screen or a "PATTERN BURN" may develop
  • Hitachi 46GX01B | Owners Guide - Page 9
    ACCESSORIES pulling the cover off. 2. Insert two new "AA" size batteries for the remote control. When replacing old batteries, push them towards the springs and lift them out. 3. Match the batteries to the (+) and (-) marks in the battery compartment. 4.
  • Hitachi 46GX01B | Owners Guide - Page 10
    set failure, do not place the TV where temperatures can become excessively hot, for example, in direct sunlight or near a heating appliance, etc. VIEWING The major benefit of the HITACHI Projection Television is its large viewing screen. To see this large screen at its best, test various locations
  • Hitachi 46GX01B | Owners Guide - Page 11
    HOW TO SET UP YOUR NEW HITACHI PROJECTION TV are placed too close to the television. Move the magnetic field source away from the television until there is no picture distortion. 11
  • Hitachi 46GX01B | Owners Guide - Page 12
    Antenna Connector For connecting RF signals (antenna or cable TV) to the antenna jack on the television. Phono Connector S-Video (Super Video) Connector Used on all standard video and audio cables which This connector is used on camcorders, VCRs, and connect to inputs and outputs located on
  • Hitachi 46GX01B | Owners Guide - Page 13
    HOOK-UP CABLES AND CONNECTORS Consult your dealer or service store for the antenna mixer. 13
  • Hitachi 46GX01B | Owners Guide - Page 14
    making it possible to set TV features to your preference without using the remote. INPUT/EXIT button Press TV screen. These buttons also serve as the cursor left ( ) and right ( ) buttons when in MENU mode. POWER Button Press this button to turn the TV on or off. NOTES: Your HITACHI Projection TV
  • Hitachi 46GX01B | Owners Guide - Page 15
    an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds. Press the POWER button on the TV again to end the autodemonstration. POWER light You will see a red light when the TV is turned on. AI (Artificial
  • Hitachi 46GX01B | Owners Guide - Page 16
    remote inputs to connect external devices, such as VCRs, camcorders, laserdisc players, DVD players, etc. (If the stereo can be controlled by the television's main volume. (5) S-VIDEO INPUTS input jacks, connect your components audio output to the TV's INPUT 2 Left and Right Audio input jacks. Your
  • Hitachi 46GX01B | Owners Guide - Page 17
    and external speaker features. See Page 17 for Audio System Setup. The TV's Internal Speakers will be switched off when "EXT." is selected. (8) for the surround sound feature. The volume level is controlled by the television's main volume buttons. Use speaker with 8-Ohm impedance only. Click here
  • Hitachi 46GX01B | Owners Guide - Page 18
    connect it to the left audio jack on the TV. Refer to the operating guide of your other electronic equipment for additional information on (INPUT 1 in example on page 11.) Refer to your VCR operating guide for more information on line inputoutput connection. You may use VIDEO or COMPONENT
  • Hitachi 46GX01B | Owners Guide - Page 19
    When using the Y-CB-CR input jacks, connect your components audio output to the TV's INPUT 2 Left and Right Audio input jacks. Your component outputs may be To control the audio level of an external audio amplifier with the remote control, connect the system as shown below. NOTE: To prevent damage
  • Hitachi 46GX01B | Owners Guide - Page 20
    VCR, camcorder, laserdisc player, DVD player to your TV set is dependent on the model and features of each component. Check the owner's manual of OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set below. 2. Connect the cable from the AUDIO OUT of the VCR or the laserdisc
  • Hitachi 46GX01B | Owners Guide - Page 21
    OR STEREO LASERDISC PLAYER 1. Connect the cable from the AUDIO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable from
  • Hitachi 46GX01B | Owners Guide - Page 22
    #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT 1 in example on page 11) Refer to your VCR operating guide for more information on line inputoutput connections. 22
  • Hitachi 46GX01B | Owners Guide - Page 23
    the Laserdisc or the DVD player to the INPUT 2 (Y) jack as shown on the TV set below. 2. Connect the cable from the CB OUT or B-Y OUT of the Laserdisc Laserdisc or the DVD player to the INPUT 2 (CR) jack, as shown on the TV set below. 4. Connect the cable from the AUDIO OUT R of the Laserdisc or DVD
  • Hitachi 46GX01B | Owners Guide - Page 24
    the table for the different surround sound requirements. The television's internal speakers. These speakers are connected to a separate audio amplifier. Use TO HI-FI" output on the TV. (3) These speakers are connected to the rear speaker 8 Ohm output on the TV. SURROUND FEATURE OFF MATRIX EXTERNAL SPEAKERS
  • Hitachi 46GX01B | Owners Guide - Page 25
    AUDIO SYSTEM SET-UP * See page 10 for location of Surround Switch. THE GENIUS REMOTE CONTROL (CLU-436UI) 25
  • Hitachi 46GX01B | Owners Guide - Page 26
    point the remote control at the remote sensor of the TV and press the TV button. The remote will now control your television. To operate your VCR, point the remote at the remote sensor of the VCR and press the VCR button. The remote will now control your VCR. (See page 25 for instructions on how to
  • Hitachi 46GX01B | Owners Guide - Page 27
    HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV (1) POWER Button Press this button to turn the TV set on or off when the remote is in TV mode. If a Special Event Reminder is set, it will be displayed when the TV is first turned on. (See page
  • Hitachi 46GX01B | Owners Guide - Page 28
    HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV Press this button when a menu is displayed to view HELP text, which gives a description of the displayed menu. The HELP text check the time, CHANNEL ID, and if the SLEEP timer is set. When in MENU mode, this button will exit all ON-Screen Displays. 28
  • Hitachi 46GX01B | Owners Guide - Page 29
    HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV When an S-VIDEO Input is connected to VIDEO: 1. When an COMPONENT: YCB-CR Input is connected to VIDEO: 2. (9) MENU, CURSOR Buttons All the On-Screen Display features can be set or adjusted by using these buttons. The MENU button will start the On-
  • Hitachi 46GX01B | Owners Guide - Page 30
    HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV 30
  • Hitachi 46GX01B | Owners Guide - Page 31
    (PIP) Your HITACHI Projection TV incorporates Dual Tuner picture and PIP sub-picture tuning, press PIP CH button on the remote. Every press of the PIP CH will highlight the main or PIP button and a sub-picture appears in one corner of the screen. Press the button again to reduce the size of the sub
  • Hitachi 46GX01B | Owners Guide - Page 32
    SURF mode, auto-scanning will continuously scan. 2. If a channel is tuned during this SURF scanning, sub-pictues will be removed from the screen. 3. If PARENTAL CONTROL MOVIE/TV RATINGS setting is ON, PIP Surf Mode is deactivated. 4. You must be in ANT A mode for SURF PIP to operate. (2) SWAP Button
  • Hitachi 46GX01B | Owners Guide - Page 33
    PICTURE-IN-PICTURE (PIP) (4) FREEZE (FRZ) button (With PIP ON) If you wish to freeze the Sub-Picture, press the FRZ button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the
  • Hitachi 46GX01B | Owners Guide - Page 34
    guide. 3. The remote control will remember the codes you have programmed until the batteries are removed from the remote does not have a power function, the remote will issue the CHANNEL UP function. 5. The MENU button will act as the VCR MENU button for HITACHI VCRs. 6. The LST-CH button will
  • Hitachi 46GX01B | Owners Guide - Page 35
    must press the RECORD button twice to record a program. (3) EXCLUSIVE TV Buttons These buttons are for operating the TV. NOTE: Refer to instruction manual of the VCR for operation of the buttons exclusively for the VCR. USING THE REMOTE TO CONTROL CABLE BOX/SATELLITE FUNCTIONS Operating the precoded
  • Hitachi 46GX01B | Owners Guide - Page 36
    after performing the above procedures, please consult your cable box operating guide. 3. The remote control will remember the codes you have programmed in until the batteries are removed from the remote control. After replacing the batteries repeat the entire programming procedure stated above
  • Hitachi 46GX01B | Owners Guide - Page 37
    remote to control your cable box by setting it to cable. (2 )PRECODED CABLE Box Buttons These buttons transmit the chosen precoded cable codes. (3) EXCLUSIVE TV Buttons These buttons are for operating the TV ,43 42 43 23 15,17 12 01 31 25,42 05,33,52 45,46,48,49 44 02,05,06,08,10,33 52 16 20,41 20,41
  • Hitachi 46GX01B | Owners Guide - Page 38
    SATELLITE, VCR, AUDIO AND DVD CODES (CLU-436UI) Scientific Atlanta Signal Sprucer Stargate Sylvania Teleview TFC Toshiba TV 86 United Artists Universal Zenith 03,04,11,34,63 10,18 13 10,18 00 18 28 09 51,52 03,15,66 00 09 00,01,08,09,14,26 ,32,37,40,43,45, 46,48,49,53,56,60 66 05,07 07,24,28,44 38
  • Hitachi 46GX01B | Owners Guide - Page 39
    CABLE/SATELLITE, VCR, AUDIO AND DVD CODES (CLU-436UI) Gerrard Goldstar Grundig Harman/Kardon Headquarter Hitachi JVC Kenwood Kodak Lloyd's LXI Magnin Marta MEI MGA Minolta Motorola Multitech NEC Noblex Optimus Orion Penney Philco Pilot Portland Pulsar Quartz Radio Shack Randex
  • Hitachi 46GX01B | Owners Guide - Page 40
    Panasonic 76 Pioneer 73 RCA 75 Toshiba 69 JVC 74 Mitsubishi 71 Philips 72 Proscan 75 Sony 70 ULTRATEC OSD 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the CURSOR to highlight a different feature. 3. Press EXIT on the
  • Hitachi 46GX01B | Owners Guide - Page 41
    . This part of the screen shows which remote control buttons to use. MENU LANGUAGE PLUG & PLAY SIGNAL SOURCE AUTO CHANNEL SET CHANNEL MEMORY CHANNEL LIST CLOCK SET DIGITAL ARRAY Choose English, French, or Spanish text. Optimum hook up for your system. Select Antenna or Cable TV. First time set up
  • Hitachi 46GX01B | Owners Guide - Page 42
    with any VIDEO input. Feature to display dialogue/text. Select from three types of backgrounds. Introduces you to basic TV functions. CONTRAST BRIGHTNESS COLOR TINT SHARPNESS RESET ADVANCED SETTINGS Adjust contrast. Adjust brightness. Adjust color. Adjust tint. Adjust sharpness. Set VIDEO settings
  • Hitachi 46GX01B | Owners Guide - Page 43
    Use the CURSOR or on the remote to highlight the function desired. NOTE: To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds. Press the POWER button on the TV again to end the autodemonstration
  • Hitachi 46GX01B | Owners Guide - Page 44
    SET UP Press CURSOR or to highlight the correct answers to all three questions. Press CURSOR to display the graphic guide. Press EXIT to quit menu or CURSOR to begin AUTO CHANNEL SET. (See page 33). SIGNAL SOURCE Select ANTENNA if you are using an indoor
  • Hitachi 46GX01B | Owners Guide - Page 45
    MENU or CURSOR to return to previous menu. RECEPTION BAND Reception channels for each mode are shown at the left. Refer to your cable or TV guide for channel identification standards. If certain CATV channels are poor or not possible in CATV1 mode, set SIGNAL SOURCE to CATV2. AUTO CHANNEL SET This
  • Hitachi 46GX01B | Owners Guide - Page 46
    MEMORY to add or to erase additional channels. CHANNEL MEMORY Use this function after AUTO CHANNEL SET to add or erase additional channels to the remote control CHANNEL or buttons
  • Hitachi 46GX01B | Owners Guide - Page 47
    buttons to change the channel. Press EXIT to quit menu or CURSOR to return to previous menu. CHANNEL LIST Use this function allows you to review which channels are labeled in CHANNEL ID (ID.), which have been added to CHANNEL MEMORY (SCAN), and which are protected by PARENTAL CONTROL (LOCK). 47
  • Hitachi 46GX01B | Owners Guide - Page 48
    CURSOR or to review more channels. Press EXIT to quit menu or CURSOR to return to previous menu. NOTE: Each touch of CURSOR CLOCK SET or will display the next eight channels. The time must be set before you can use the CALENDAR, 4 EVENT PROGRAM, SPECIAL EVENT REMINDER or TV TIME OUT
  • Hitachi 46GX01B | Owners Guide - Page 49
    SET UP 49
  • Hitachi 46GX01B | Owners Guide - Page 50
    CURSOR is in the first position. DIGITAL ARRAY Your HITACHI Projection TV has three color projection tubes: one for red, one HITACHI incorporates a feature to allow you to display a test pattern of horizontal and vertical lines at 9 different locations on the screen. Simply use the remote service. 50
  • Hitachi 46GX01B | Owners Guide - Page 51
    data into memory, press the front panel DIGITAL ARRAY button or the remote control MOVE Button. If you do NOT wish to save your adjustment data into memory, turn the TV OFF or press the remote control PIP button. When the TV is turned ON again, your old convergence data will be stored. When
  • Hitachi 46GX01B | Owners Guide - Page 52
    CUSTOM CUSTOM This selection contains advanced features which will make TV viewing easier and more enjoyable. CHANNEL ID Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up
  • Hitachi 46GX01B | Owners Guide - Page 53
    CUSTOM inputs will be the same. CHANNEL ID will be displayed only when channel is displayed as main picture. VIDEO ID. Use this feature to give a name to any of the two video inputs. Press CURSOR to select VIDEO LIST. Press CURSOR to select preset VIDEO LIST. Press CURSOR or to scroll through the
  • Hitachi 46GX01B | Owners Guide - Page 54
    . Repeat until category has been set with your favorite channels. The channel to be added is displayed in the top right corner of the screen. Enter channel 00 to erase a favorite channel. To reset categories and channels back to original factory preset, press RECALL while you are renaming a category
  • Hitachi 46GX01B | Owners Guide - Page 55
    buttons. Press MENU and the category will be displayed as sub-pictures at the right edge of the screen. This is useful for previewing a category. Use CURSOR , , or to highlight a favorite channel and the TV will automatically tune to that channel. Press EXIT to remove FAMILY FAVORITES OSD from the
  • Hitachi 46GX01B | Owners Guide - Page 56
    CUSTOM function) and then press cursor to select your choice. MOVIE/TV RATINGS are explained in detail in the Parental Control Movie/TV Ratings Reference Guide. To change the secret code number, select CHANGE SECRET CODE. Enter a new four digit key number you prefer. If you forget your secret code,
  • Hitachi 46GX01B | Owners Guide - Page 57
    use this function and the screen below will appear. NOTE: 1. The OFF Timer will only activate if the TV was turned on or tuned want to watch a movie with your VCR, laserdisc player, or DVD player. When REMOTE is selected, the TV will turn on and tune to VIDEO: 1 or 2 automatically, when the VIDEO
  • Hitachi 46GX01B | Owners Guide - Page 58
    is now reset and will turn on your TV as described above. 2. When using REMOTE mode, any remote control button will substitute for your video input or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as or
  • Hitachi 46GX01B | Owners Guide - Page 59
    the MENU button at any time during the tour, and the following screen will appear. Use CURSOR or then CURSOR to select ON or OFF. Press EXIT to quit MENU or CURSOR to return to previous menu. NOTE: 1. When TV set is turned on, the FIRST TIME TOUR will always appear if
  • Hitachi 46GX01B | Owners Guide - Page 60
    VIDEO VIDEO Select VIDEO to adjust picture settings and improve picture quality. Use the CURSOR or Press the CURSOR or Press EXIT to quit menu. buttons to highlight the function to be adjusted. buttons to adjust the function. NOTE: • If CONTRAST is selected, you are adjusting CONTRAST. The
  • Hitachi 46GX01B | Owners Guide - Page 61
    VIDEO Your HITACHI Projection TV has an Ultra AI (Artificial Intelligence) function return to previous menu. ULTRA AI (ARTIFICIAL INTELLIGENCE) When the AI function is on, the TV's internal computer will perform the following: 1. Automatically monitor and adjust contrast depending on room lighting
  • Hitachi 46GX01B | Owners Guide - Page 62
    for less intense colors with more blue. Select AUDIO SETTINGS to adjust the TV to your preference and to improve the sound quality. Use CURSOR or to speakers. BALANCE This function will control the left to right balance of the TV internal speakers, the AUDIO TO HI FI output and WIRELESS OUT output.
  • Hitachi 46GX01B | Owners Guide - Page 63
    an "X" in the box, it is ON. MTS MODE Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound The sources received will be displayed at the top center edge of the TV. The source you select will be displayed above the sources received. See example
  • Hitachi 46GX01B | Owners Guide - Page 64
    set: Contrast - Maximum, Super Contrast -ON, Color Temp. - Cool, Loudness-OFF, Perfect Volume - OFF. You can customize each of the above modes (TV, MOVIE, and SPORTS) to your preference to increase viewing performance and pleasure, depending upon the video program being viewed. However, if RESET is
  • Hitachi 46GX01B | Owners Guide - Page 65
    to return to previous menu. to select. If the clock is not set, you can not use this function and the next screen will appear. NOTE: 1. When the TV is turned on, the SPECIAL EVENT REMINDER message will automatically appear at the selected time. 2. Each special event message can be a maximum
  • Hitachi 46GX01B | Owners Guide - Page 66
    to quit menu or CURSOR to return to previous menu. If the clock is not set, you can not use this function and the next screen will appear. NOTES: 1. Dates of SPECIAL EVENT REMINDER will appear blinking. Special event message will be displayed only if current date is within the day
  • Hitachi 46GX01B | Owners Guide - Page 67
    CARE OF YOUR HITACHI PROJECTION TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened with warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Place your television away from extreme
  • Hitachi 46GX01B | Owners Guide - Page 68
    PROBLEMS RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills and other electrical appliances. • GHOSTS: Ghosts are caused by the television
  • Hitachi 46GX01B | Owners Guide - Page 69
    from your HITACHI Projection Television. Features: • Superfine Picture Quality 1000 Line Horizontal Resolution • Pure Green and Red Filter Lenses • Artificial Intelligence System • Remote (Controls many VCR brands, cable boxes, satellite boxes.) • High Definition On-Screen Display (UltraTEC
  • Hitachi 46GX01B | Owners Guide - Page 70
    7Vp-p, 75 Ohm Outputs: • Video 1.0Vp-p, 75 Ohm • Audio 470mVrms, 1k Ohm Dimensions: 46GX01B • Height (in.) • Width (in.) • Depth (in.) • Weight (lbs) 50GX01B • NOTE: Due to improvements, specifications in this operating guide are subject to change without notice. HITACHI SERVICE HOTLINE 70
  • Hitachi 46GX01B | Owners Guide - Page 71
    week, 24 hours a day 800 HITACHI (1-800-448-2244) Hitachi America, LTD Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in
  • Hitachi 46GX01B | Owners Guide - Page 72
    NOTES NOTES (blank page for consumer notes) 72
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

IMPORTANT
1
PROJECTION COLOR TV
46GX01B
50GX20B
OPERATING GUIDE
TABLE OF CONTENTS
IMPORTANT
..............................................................................................................................................................
2
SAFETY TIPS
.............................................................................................................................................................
4
PICTURE CAUTIONS
................................................................................................................................................
8
ACCESSORIES
..........................................................................................................................................................
8
REMOTE CONTROL BATTERY INSTALLATION AND REPLACEMENT
.............................................................
8
HOW TO SET UP YOUR NEW HITACHI PROJECTION TV
..................................................................................
10
HOOK-UP CABLES AND CONNECTORS
..............................................................................................................
12
FRONT PANEL CONTROLS
...................................................................................................................................
14
FIRST TIME USE
.....................................................................................................................................................
16
REAR SPEAKER TERMINAL CONNECTIONS
......................................................................................................
18
EXTERNAL CONNECTIONS
...................................................................................................................................
19
CONNECTING EXTERNAL VIDEO SOURCES
......................................................................................................
20
INPUT MODE SELECTION ORDER
....................................................................................................................
20
CONNECTING EXTERNAL VIDEO SOURCES
......................................................................................................
23
AUDIO SYSTEM SET-UP
........................................................................................................................................
24
THE GENIUS REMOTE CONTROL (CLU-436UI)
...................................................................................................
26
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV
.........................................................................
27
PICTURE-IN-PICTURE (PIP)
...................................................................................................................................
31
USING THE REMOTE TO CONTROL VCR FUNCTIONS
......................................................................................
34
USING THE REMOTE TO CONTROL CABLE
........................................................................................................
35
BOX/SATELLITE FUNCTIONS
................................................................................................................................
35
CABLE/SATELLITE, VCR, AUDIO AND DVD CODES (CLU-436UI)
......................................................................
37
CABLE BRAND
.....................................................................................................................................................
37
VCR BRAND
.........................................................................................................................................................
38
SATELLITE BRAND CODES
...............................................................................................................................
40
AUDIO BRAND
.....................................................................................................................................................
40
DVD BRAND
.........................................................................................................................................................
40
ULTRATEC OSD
......................................................................................................................................................
40
SET UP
.....................................................................................................................................................................
43
CUSTOM
..................................................................................................................................................................
52
VIDEO
.......................................................................................................................................................................
60
THEATER
.................................................................................................................................................................
64
INFO
.........................................................................................................................................................................
65
CARE OF YOUR HITACHI PROJECTION TV AND
YOUR REMOTE CONTROL
................................................
67
RECEPTION PROBLEMS
........................................................................................................................................
68
USEFUL INFO
..........................................................................................................................................................
69
NOTES
.....................................................................................................................................................................
72