Hitachi 50C10 Owners Guide
Hitachi 50C10 - LCD Projection TV Manual
 |
View all Hitachi 50C10 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi 50C10 manual content summary:
- Hitachi 50C10 | Owners Guide - Page 1
LCD REAR PROJECTION TELEVISION Operating Guide for 50C10 IMPORTANT SAFETY INSTRUCTIONS 2-3 FIRST TIME USE ...4-19 THE REMOTE CONTROL 20-31 ON-SCREEN DISPLAY...32-56 LAMP REPLACEMENT ...57-60 CARE OF YOUR HITACHI TV & REMOTE CONTROL 61 RECEPTION PROBLEMS ...62 USEFUL INFORMATION / INDEX 63-70 As - Hitachi 50C10 | Owners Guide - Page 2
no user serviceable parts inside the television. • Model and serial numbers are indicated on back side of the television. CAUTION: Adjust only those controls that are covered in the instructions, as improper changes or modifications not expressly approved by HITACHI could void the user's authority - Hitachi 50C10 | Owners Guide - Page 3
and instructions marked on this television. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUNDING CONDUCTORS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250 PART - Hitachi 50C10 | Owners Guide - Page 4
SP50WS QJ01601 CUSTOM HITACHI TELEVISION STAND Excellent for VCR and video tape storage. CAUTION: 1. This SP50W and SP50WS LCD stand for use only with Hitachi 50C10. Use with other apparatus is capable of resulting in instability causing possible injury. 1. Remote Control Unit CLU-4329UG (Part No - Hitachi 50C10 | Owners Guide - Page 5
least 10 cm (4 inches) from the wall. VIEWING The major benefit of the HITACHI LCD Rear PTV is its large viewing screen. To see this large screen at its best, test various locations in the room to find the optimum spot for viewing. The best picture is seen by sitting directly in front of the - Hitachi 50C10 | Owners Guide - Page 6
television's rear jack panel and front control panel. "F" Type 75-Ohm Coaxial Antenna Connector For connecting RF signals (antenna or cable TV) to the antenna jack on the television to the TV antenna terminal, and connect the cables to the antenna mixer. Consult your dealer or service store for the - Hitachi 50C10 | Owners Guide - Page 7
your choice (see page 22). To change antenna source, press the ANT button on your remote control. ቤ CHANNEL selector Press these buttons until the desired channel appears in the top right corner of the TV screen. These buttons also serve as the cursor down (̄) and up (̆) buttons when in MENU mode - Hitachi 50C10 | Owners Guide - Page 8
IR receiver (remote sensor) of the TV. When using the remote control, point it towards the screen for best response. ቨ POWER button Press this button to turn the TV on or off. ቩ POWER light This light is on during normal operation. Light Blinking Slowly (2 seconds): television lamp is cooling down - Hitachi 50C10 | Owners Guide - Page 9
S-INPUT cable in place of the standard video cable. 3. If you have a mono VCR, insert the audio cable into the left audio jack of your TV. 9 - Hitachi 50C10 | Owners Guide - Page 10
R AUDIO ብ ቦቤ ቧ ቢ Antenna Input/Output ANT A- A 75-Ohm RF antenna or CATV (Cable TV) input. ANT A can be displayed as a main picture or sub-picture. ANT B- A 75-Ohm With this connection, the audio to the stereo can be controlled by the television's main volume. ቦ CENTER IN (Input) This jack is - Hitachi 50C10 | Owners Guide - Page 11
Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV's PB input and the components R-Y output to the TV's PR input. 3. Your component outputs may be labeled Y-CBCR. In this digital out terminal, a high definition picture can be displayed on the screen in its digital form. 11 - Hitachi 50C10 | Owners Guide - Page 12
FIRST TIME USE Outside antenna or cable TV coaxial cable 2-Way signal splitter REAR PANEL CONNECTIONS TYPICAL FULL VIDEO S-VIDEO OUT R AUDIO VCR #1 ANT OUTPUT IN S-VIDEO V L R OUTPUT INPUT Cable TV Box LR INPUT CENTER OUTPUT Stereo System Amplifier S-VIDEO V L R INPUT S-VIDEO V L R - Hitachi 50C10 | Owners Guide - Page 13
connect it to the left audio jack on the television. • Refer to the operating guide of your other electronic equipment for additional information on case, connect the components CB output to the TV's PB input and the components CR output to the TV's PR input. • You may use composite video - Hitachi 50C10 | Owners Guide - Page 14
FIRST TIME USE CONNECTING EXTERNAL AUDIO DEVICES To control the audio level of an external audio amplifier with the TV remote control, connect the system as shown below. REAR PANEL OF TELEVISION ANT A TO CONVERTER INPUT 1 ANT B INPUT 2 DVI-HDTV PR PB Y R (MONO)/L AUDIO PR PB Y/VIDEO R - Hitachi 50C10 | Owners Guide - Page 15
you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your TV set is dependent on the model and features of each component. Check the owner's manual of each component for the location of video and audio inputs and outputs. The following connection diagrams are - Hitachi 50C10 | Owners Guide - Page 16
VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to own video or line output. Refer to your VCR operating guide for more information on line input-output connections. 16 - Hitachi 50C10 | Owners Guide - Page 17
S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the or line output. Refer to your VCR operating guide for more information on line input-output connections. 17 - Hitachi 50C10 | Owners Guide - Page 18
HDTV set top box or DVD player to the DVI-HDTV input as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the HDTV set to a display. 4. The connected digital output device controls the DVI interface so proper set-up of device user settings determines final video appearance. 18 - Hitachi 50C10 | Owners Guide - Page 19
2: Y-PBPR. 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below. 2. Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT - Hitachi 50C10 | Owners Guide - Page 20
keys are grouped together in one area. To operate your TV, point the remote control at the screen of the TV and press the TV button. The remote will now control your television. To operate your cable/satellite box, point the remote at the remote sensor of the cable/satellite box and press the CABLE - Hitachi 50C10 | Owners Guide - Page 21
REMOTE TO CONTROL YOUR LCD REAR PTV THE REMOTE CONTROL ቢ TV POWER button ባ PICTURE-IN-PICTURE ቤ DAY/NIGHT button ብ SELECT, MENU, CURSOR buttons ቦ VOLUME, MUTE buttons POWER TV changes). ብ SELECT, MENU, CURSOR buttons All the On-Screen Display features can be set or adjusted by using the CURSOR - Hitachi 50C10 | Owners Guide - Page 22
THE REMOTE CONTROL L L L HOW TO USE THE REMOTE TO CONTROL YOUR LCD REAR PTV ቦ VOLUME, MUTE button Press the VOLUME up . Ant A 10 ANT Ant B 28 ቩ VID1 ~ VID5 When the remote control is in TV mode, press these buttons to directly select the video input sources between the five video inputs. When - Hitachi 50C10 | Owners Guide - Page 23
HOW TO USE THE REMOTE TO CONTROL YOUR LCD REAR PTV ቪ ASPECT button Press this button to zoom 16:9 images. (1) NTSC/480i/480p INPUT 4:3 INPUT 4:3 STANDARD 4:3 EXPANDED 4:3 ZOOM1 THE REMOTE CONTROL (2) 480i/480p INPUT 16:9 INPUT 16:9 ZOOM 16:9 STANDARD 4:3 ZOOM2 4:3 STANDARD 4:3 EXPANDED - Hitachi 50C10 | Owners Guide - Page 24
HOW TO USE THE REMOTE TO CONTROL YOUR LCD REAR PTV ቫ SLEEP button Press this button to display the sleep timer in the lower center of the screen. Every subsequent press of this button will add 15 minutes to this timer up to a maximum of three hours. Once set, use the INFO button to view time - Hitachi 50C10 | Owners Guide - Page 25
THE REMOTE CONTROL PICTURE-IN-PICTURE (PIP) Your HITACHI LCD Rear PTV incorporates dual tuner technology designed for improved viewing enjoyment. This dual tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each - Hitachi 50C10 | Owners Guide - Page 26
from the screen. SURF MODE PIP is allowed only when ANT A/ANT B is selected as the main channel. If MOVIE/TV RATINGS lock functions setting is ON, SURF mode will be deactivated. Closed Caption will not appear when SURF mode is on. While in SURF scanning mode, press SELECT on the remote control to - Hitachi 50C10 | Owners Guide - Page 27
THE REMOTE CONTROL PICTURE-IN-PICTURE (PIP) ቦ FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when - Hitachi 50C10 | Owners Guide - Page 28
the above procedures, please consult ቤ SELECT your VCR operating guide. 3. The remote control will remember the codes you have MUTE EXIT LAST CH programmed until the batteries are removed from the remote control. After replacing the batteries repeat the entire programming procedure as stated - Hitachi 50C10 | Owners Guide - Page 29
your cable/satellite box operating guide. ቤ POWER TV CBL/SAT DVD/VCR SWAP PIP MODE PIP FREEZE SURF DAY/NIGHT MENU SELECT 3. The remote control will remember the codes you have programmed until the batteries are removed from the remote control. After replacing the batteries repeat the - Hitachi 50C10 | Owners Guide - Page 30
after performing the above procedures, please consult your DVD player operating guide. 3. The remote control will remember the codes you have programmed until the batteries are removed from the remote control. After replacing the batteries repeat the entire programming procedure as stated above - Hitachi 50C10 | Owners Guide - Page 31
FOR REMOTE CONTROL CABLE BRAND CODE General Instrument 17 Hamlin 22,23,24,25 Jerrold 00,01,02,03,04,05,06,07,21 Oak 26,27,28 Panasonic 18,19,20 Pioneer 13,14 Scientific Atlanta 08,09,10 Tocom 15,16 Zenith 11,12 SATELLITE BRAND CODE Ecostar 32 Hitachi 29 - Hitachi 50C10 | Owners Guide - Page 32
features on your HITACHI LCD TV. 2. Press the CURSOR to highlight a different feature, then press SELECT to choose. 3. Press EXIT on the remote control to quickly exit from a menu. 4. Press CURSOR ̇ or ̈ to access Favorite Channels menu. MENU SELECT EXIT This part of the screen shows which - Hitachi 50C10 | Owners Guide - Page 33
system. Block various types of movies and television programming based on the Canadian French ratings system. ON-SCREEN DISPLAY Setup Menu Preference Screen Saver Set The Clock Set The Inputs Set The Color System Set Black Side Panel Set Event Timer Set Closed Captions Choose English, French, or - Hitachi 50C10 | Owners Guide - Page 34
Mode Auto Color Noise Reduction Color Management (Set User Colors) Auto Movie Mode (TV/Cinema Detection) Day 100% 50% 50% Center Reset Reset the video menu settings on current input automatically to Day Mode. Press EXIT to quit menu or select Picture Mode to return to previous menu. ON-SCREEN - Hitachi 50C10 | Owners Guide - Page 35
SEL Sel SELECT Video Picture Mode Contrast Brightness Color Tint Sharpness Color Temperature Black Enhancement Contrast Mode Reset Video Settings Move SEL Select ANT A/B Day 100% 50% 50% 50% High High Dynamic Black level, and set to Auto for automatic Contrast selection. ON-SCREEN DISPLAY 35 - Hitachi 50C10 | Owners Guide - Page 36
Auto Movie Mode Move SEL Select ANT A/B Off Low Off ON-SCREEN DISPLAY Color Management Use this function to adjust and balance the Off Video Color Management Set User Colors Magenta 50% Red 50% Yellow 50% Green 50% Cyan 50% Blue 50% Reset Move SEL Select Use CURSOR buttons - Hitachi 50C10 | Owners Guide - Page 37
. When film is transferred to video for television viewing, the disparity between the two frame rates must be reconciled. This involves a process known as 3:2 pulldown. When Auto Movie Mode is turned On from the Video menu, your Hitachi LCD TV will activate the circuitry for this special feature - Hitachi 50C10 | Owners Guide - Page 38
control the left to right balance of the LCD TV's internal speakers. Sound Enhancement See page 39. Audio Source Multi-Channel Television A 10 SAP R MONO SELECTED 3:32 PM Ant A 10 Mono R ON-SCREEN DISPLAY Internal Speakers This function is useful when setting up the external speakers. ON - Hitachi 50C10 | Owners Guide - Page 39
from just two external speakers (or) the two channel speakers of your HITACHI LCD television. If your HITACHI LCD television is connected to an external audio system, SRS will also create an incredible of BBE Sound, Inc. Manufactured under license from BBE Sound, Inc. ON-SCREEN DISPLAY 39 - Hitachi 50C10 | Owners Guide - Page 40
this function to select the Picture Format Aspect Ratio. Auto Aspect Automatically adjust the Aspect Ratio depending on the input signal to fill the screen. Press CURSOR buttons ̆, ̄, to select menu item. Press the SELECT button to select. A "" in the box indicates that the feature is ON. NOTES - Hitachi 50C10 | Owners Guide - Page 41
VHF 2 ~ 13ch UHF 14 ~ 69ch RECEPTION BAND CATV 1 OR CATV 2 CATV CHANNEL Indicated on VHF 2~13 the screen 2 ~ 13 Mid band A~1 A-5 ~ A-1 14 ~ 22 95 ~ 99 Super band J~W 23 ~ 36 Hyper shown at the left. Refer to your cable or TV guide for channel identification standards. ON-SCREEN DISPLAY 41 - Hitachi 50C10 | Owners Guide - Page 42
CHANNEL MANAGER Auto Channel Scan This feature will automatically store active TV channels in Auto Channel Scan. This will allow you to skip unused channels when using CHANNEL UP (̆) or Auto Channel Scan. See Channel Manager - Scan to add or to erase additional channels. ON-SCREEN DISPLAY 42 - Hitachi 50C10 | Owners Guide - Page 43
̆ or ̄ to review more channels. Press EXIT to quit the menu. Scan Use this feature after Auto Channel Scan is completed to add (On) or skip (Off) additional channels to the remote control channel ̆ or ̄ . NOTE: Lock feature cannot be selected or set in Channel Manager. ON-SCREEN DISPLAY 43 - Hitachi 50C10 | Owners Guide - Page 44
this feature to give up to 20 channels a name when Antenna signal source is selected and up to 60 channels a name when Cable TV signal source is selected. Chan. Manager Ant. A Ch# 2 3 4 5 6 7 8 9 Scan On On Off Off Off 2. Channel ID will not be displayed when PIP is ON. ON-SCREEN DISPLAY 44 - Hitachi 50C10 | Owners Guide - Page 45
(see page 46). When TV Ratings is selected, various types of television programming based on a parental guide ratings will be blocked. set (see page 52). 3. Text appears on the screen to indicate that TV Timed Lock is activated. 4. If Movie/TV Ratings Lock and Closed Caption settings are On, PIP - Hitachi 50C10 | Owners Guide - Page 46
any movie you feel might have inappropriate content. MENU Locks Change Access Code Engage Lock TV Time Lock Movie Ratings TV Ratings Canadian Ratings (Eng) Canadian Ratings (Frn) Move SEL Select SELECT Locks Movie Ratings . Movie has not been rated or ratings do not apply. ON-SCREEN DISPLAY 46 - Hitachi 50C10 | Owners Guide - Page 47
the category that you want to block. Press select to block the TV Rating that you have selected. Press EXIT to quit menu or select TV Rating to return to the previous menu. TV Parental Guide Ratings Chart TV-Y TV-Y7 TV-G TV-PG TV-14 TV-MA FV V S L D All children. The themes and elements in this - Hitachi 50C10 | Owners Guide - Page 48
type of movie and television program in Canada that (Eng) you feel might be inappropriate in its content. MENU Locks Change Access Code Engage Lock TV Time Lock Movie Ratings TV Ratings Canadian Ratings (Eng graphic language and explicit portrayals of nudity and/or sex. ON-SCREEN DISPLAY 48 - Hitachi 50C10 | Owners Guide - Page 49
content. MENU Locks Change Access Code Engage Lock TV Time Lock Movie Ratings TV Ratings Canadian Ratings (Eng) Canadian Ratings (Frn) Once rating is selected, for example 8 ans+, all movies and television programs rated 8 ans+ and higher will be automatically blocked. Press SCREEN DISPLAY 49 - Hitachi 50C10 | Owners Guide - Page 50
the CURSOR ̆ or ̄ on the remote to highlight the function desired. MENU Video Audio Aspect Chan. Manager Locks Setup Move SEL Sel SELECT Setup Menu Preference Screen Saver Set The Clock Set The Inputs Set The Color System Set Black Side Panel Set Event Timer Set Closed Captions Move SEL Select - Hitachi 50C10 | Owners Guide - Page 51
"temporary image retention" to the LCD Rear PTV. Use the SCREEN SAVER feature to avoid any temporary image Timer Set Closed Captions Move SEL Select SELECT Setup Screen Saver Main Picture Moving Off Option 1 Option 2 Option 3 Screen Wipe : Wipe Move SEL Select Use CURSOR ̆ , ̄ to highlight Screen - Hitachi 50C10 | Owners Guide - Page 52
Clock The time must be adjusted before you can use the "Set Event Timer" or "TV Time Out" features. Setup Menu Preference Screen Saver Set The Clock Set The Inputs Set The Color System Set Black Side Panel Set Event Timer Set Closed Captions Move SEL Select SELECT Setup Set The Clock Time : 03 - Hitachi 50C10 | Owners Guide - Page 53
Setup Menu Preference Screen Saver Set The Clock Set The Inputs Set The Color System Set Black Side Panel Set Event Timer Set Closed Captions OFF. This feature is now reset and will turn on your TV as described above. 2. When using Remote mode, any remote control button will substitute for your - Hitachi 50C10 | Owners Guide - Page 54
DTV programs. HDTV - High Definition Television - Use for High Vision Signal Y-PBPR from HDTV Set-Top Box. SDTV/DVD - Standard Definition Television or DVD (Digital Versatile Disc Player MODE PIP and SPLIT FREEZE. The TV set will always return to "Set Black Side Panel - Off" setting everytime the - Hitachi 50C10 | Owners Guide - Page 55
three hours. Therefore, do not Set Event Timer for more than three hours if you do not plan to control your television with the remot control. CAUTION: Do not use your TV as a deterrent when away from home by using the On and Off Timers. For safety, the TV should be turned off when you are away - Hitachi 50C10 | Owners Guide - Page 56
Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as or . Setup Menu Preference Screen Saver Set The Clock Set The Inputs Set The Color System Set Black - Hitachi 50C10 | Owners Guide - Page 57
is still lit, please contact your authorized service center (see page 65-66). NOTES: • Contact your Hitachi dealer for a new lamp unit. Using other lamps may cause damage to the TV Set. MODEL# 50C10 LAMP TYPE LM500 PART# UX21513 • When replacing the lamp, let it cool down completely, for - Hitachi 50C10 | Owners Guide - Page 58
lamp to cool down before replacing it. 120V FRONT COVER PUSH POWER NOTE: THE LAMP IS VERY HOT AND MAY CAUSE FIRE OR SEVERE BURNS. WAIT AT LEAST 30~45 MINUTES TO ALLOW THE LAMP TO COOL BEFORE PROCEEDING WITH LAMP REMOVAL. 2. Remove the front cover from the TV information, call "1-800-HITACHI." 58 - Hitachi 50C10 | Owners Guide - Page 59
LAMP REPLACEMENT LAMP REPLACEMENT 3. Remove the screw securing the lamp cover with a Phillips head screw driver as shown. Remove the lamp cover. SCREW LAMP COVER PHILLIP HEAD SCREW DRIVER NOTE: THE LAMP IS VERY HOT AND MAY CAUSE FIRE OR SEVERE BURNS. WAIT AT LEAST 30~45 MINUTES TO ALLOW THE LAMP - Hitachi 50C10 | Owners Guide - Page 60
LAMP REPLACEMENT LAMP REPLACEMENT 6. Without installing the lamp cover, the power will be off and the Lamp Indicator will flash (see page 8). Be sure to install the lamp cover by re-engaging the two clips and tighten Canada at www.epsc.ca (in Canada). For more information, call "1-800-HITACHI." 60 - Hitachi 50C10 | Owners Guide - Page 61
CARE OF YOUR HITACHI TELEVISION AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Place your Television away from extreme heat, - Hitachi 50C10 | Owners Guide - Page 62
PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. • GHOSTS: Ghosts are caused by the television The TV set can generate - Hitachi 50C10 | Owners Guide - Page 63
USEFUL INFO HITACHI Liquid Crystal Display incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR TO HAVE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1. - Hitachi 50C10 | Owners Guide - Page 64
• Remote (Controls many VCR brands, cable boxes, satellite boxes, and other audio equipment). • New Easy-to-Use (3-Language) On-Screen Menu mm) • Width (in.) (mm) • Depth (in.) (mm) • Weight (lbs.) (kg) 50C10 35 1/2 901 54 5/8 1,387 16 3/8 415 114 51.7 NOTE: Due to improvements, specifications in - Hitachi 50C10 | Owners Guide - Page 65
a week, 24 hours a day (1-800-448-2244) Hitachi America, LTD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 - Hitachi 50C10 | Owners Guide - Page 66
EST 9:00am - 7:00pm Saturday EST 9:00am - 5:00pm Look for your French Manual on the outside of the box. If the manual is missing, call 1-800-HITACHI (1-800-448-2244) for a copy. Pour de plus amples renseignements sur le service durant la période couverte par la garantie, sur le fonctionnement ou - Hitachi 50C10 | Owners Guide - Page 67
Time, 52 Date, 52 Closed Captions Analog Captions, 56 Color System, 54 Color Temperature, 35 Color, 35 Contrast, 35 D DVI-HDTV, 11, 12, 18 E Event Timer ANT A/B, 55 I Input Setup, 53 67 - Hitachi 50C10 | Owners Guide - Page 68
L Lamp Lamp Indicator, 8 Lamp Replacement, 57-60 Language Menu Language, 50 Locks Change Access Code, 45 Channel Lock, 45 Input Lock, 45 Front Panel Lock, 45 TV Time Lock, 45 Movie Ratings, 46 TV Ratings, 47 TV Ratings (Canadian - English), 48 TV Ratings (Canadian - French), 49 Loudness, 38 M - Hitachi 50C10 | Owners Guide - Page 69
NOTES 69 - Hitachi 50C10 | Owners Guide - Page 70
NOTES 70 - Hitachi 50C10 | Owners Guide - Page 71
NOTES 71 - Hitachi 50C10 | Owners Guide - Page 72
QR63611
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
 |
 |
LCD REAR PROJECTION TELEVISION
Operating Guide for 50C10
IMPORTANT SAFETY INSTRUCTIONS
................................................................................
2-3
FIRST TIME USE
..................................................................................................................
4-19
THE REMOTE CONTROL
..................................................................................................
20-31
ON-SCREEN DISPLAY
........................................................................................................
32-56
LAMP REPLACEMENT
......................................................................................................
57-60
CARE OF YOUR HITACHI TV & REMOTE CONTROL
............................................................
61
RECEPTION PROBLEMS
........................................................................................................
62
USEFUL INFORMATION / INDEX
......................................................................................
63-70
As an E
NERGY
S
TAR
®
Partner, Hitachi, Ltd. has determined that this
product meets the E
NERGY
S
TAR
®
guidelines for energy efficiency.