Hitachi 50HDT50 Owners Guide - Page 13

FIRST TIME USE CONNECTING PLASMA DISPLAY MONITOR TO AVC BOX 1. From the owner's accessory you will find the Monitor Connector cable. 2. Firmly, and securely insert the Monitor Connection Cable to the rear panel of the AVC box "TO MONITOR" connectors. 3. Insert the other ends of the Monitor Connection Cable to the display monitor rear panel "FROM AVC" connectors. Back of Display Monitor 32/42" Back of Display Monitor 50" NOTE: To AC outlet Core Core To AC outlet Please use HITACHI specified cable. TO MONITOR AC IN Back of AVC Center TruBass SRS and symbol are trademarks of SRS Labs, Inc. To AC outlet Please use HITACHI specified cable. TO MONITOR Back of AVC Center AC IN TruBass SRS and symbol are trademarks of SRS Labs, Inc. To AC outlet The Display Monitor and the AVC Center have their own AC Power. Both AC cords must be completely plugged in to the AVC Center and the display monitor, then plug them in to the AC outlets. CONNECTING EXTERNAL VIDEO SOURCES The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: Front panel of AVC Front panel of AVC PHONES S-VIDEO INPUT 5 AUDIO VIDEO L/(MONO) R PHONES S-VIDEO INPUT 5 AUDIO VIDEO L/(MONO) R NOTES: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal. 2. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable. 3. If you have a mono VCR, insert the audio cable into the left audio jack of your AVC box. 4. S-VIDEO input takes priority over VIDEO input. 5. If you have a VHS or 8mm camcorder, use the S-VIDEO cable in place of the VIDEO cable. 13