Hitachi 50HDT50 Owners Guide - Page 5
How To Setup Your New Hitachi Plasma Television - plasma tv
View all Hitachi 50HDT50 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
FIRST TIME USE HOW TO SETUP YOUR NEW HITACHI PLASMA TELEVISION SPEAKER INSTALLATION 42" 1. Screw the speaker holder to the speakers as shown below. Speaker Holder Screw x2 (R) (L) (R) SPEAKER INSTALLATION 50" 1. Screw the speaker holder to the speakers as shown below. Speaker Holder Screw x2 (R) (L) (R) Speaker Holder Speaker Holder Screw x2 2. Loosen 4 screws (A) (two on the left and two on the right). 3. Completely unscrew 4 screws (B) (two on the left and two on the right). 4. Hook the speaker holders to the loosened screws (A). 5. Screw the speaker holders to the Display Monitor with screws (B). 6. Tighten screws (A). (R) Speaker Unscrew (B) Completely Loosen Screw (A) Screw x2 2. Screw in screw (C). 3. Hook the upper speaker holder to the screw in (C). 4. Screw in the lower speaker holder (D). 5. Tighten screws (C) and (D). Screw in screws (C) Bottom View of Speaker Holder Insert horizontally from the side Screw in screws (B) Hook this portion to the loose screws (A). 7. Connect the speaker wires as shown below. (Make sure the core is toward the display monitor side.) Core Screw in screws (D) 6. Connect the speaker wires as shown below. (Make sure the core is toward the display monitor side.) Ferrite Core NOTES: Do not connect speakers simultaneously to the speaker terminal of the Plasma TV and an external amplifier. 5