Hitachi 50HDT50 Owners Guide - Page 62

SETUP Video 2 Auto Link Use this function to automatically turn the TV on and tune to Video 2 when it detects a video signal to input 2. Setup Set The Inputs Video1 Video2 Video3 Video4 Video5 Rename List AVR CAM CBL CBL2 DVD DVD2 LD PVR Auto Link Auto Remote Video Power Save Move SEL Return PVR2 SAT STB STB2 Off VCR VCR2 Reset THUMB STICK SELECT Setup Set The Inputs Video1 Video2 Video3 Video4 Video5 Rename List AVR CAM CBL CBL2 DVD DVD2 LD PVR Auto Link Auto Remote Video Power Save Move SEL Return PVR2 SAT STB STB2 Off VCR VCR2 Reset Use THUMB STICK then press down on THUMB STICK to change AUTO LINK setting. When AUTO is selected, the TV will turn on and switch to Video2 automatically, when the Video2 input device is turned on. This is convenient when you want to watch a movie with your VCR, laserdisc player, or DVD player. When REMOTE is selected, the TV will turn on and switch to Video2 automatically when the Video2 input device is turned on (VCR, laserdisc, or DVD) and any of the buttons on your remote control is pressed. Select Off to disable this function. Press EXIT to quit the menu. NOTES: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above. 2. When using REMOTE mode, any remote control button will substitute for your video input device play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button. 3. If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours. Set The Color System This function allows you to automatically change tint and color coordinates for DTV programs. AUTO - Automatically determines the color system for the input signal. HDTV - High Definition Television - Use for High Definition Signal Y-PBPR from HDTV Set-Top Box. SDTV/DVD - Standard Definition Television or DVD (Digital Versatile Disc Player) Y-CBCR. NOTES: 1. If Color System is set improperly (does not match actual input signal), the color and tint of the main picture will be abnormal. 2. All component color system settings will affect only color component input you are currently viewing. If you are using both sets of component input jacks, be sure to set the color system feature for both inputs. Set Black Side Panel The BLACK SIDE PANEL function turns the gray side bars on/off when watching 4:3 signals in Standard mode. When the Plasma Television is powered OFF, BLACK SIDE PANEL feature will be set to OFF automatically when the TV is powered ON. BLACK SIDE PANEL feature needs to be set every time the TV is turned ON. The top/bottom gray bar will appear in SPLIT MODE PIP and SPLIT FREEZE. NOTE: To prevent screen burn when watching 4:3 signal, turn off the BLACK SIDE PANEL. It is recommended to watch 4:3 signal with gray side bar. ON-SCREEN DISPLAY 62