Hitachi 7K100 Hard Drive Specifications

Hitachi 7K100 - Travelstar - Hard Drive Manual

Get Hitachi 7K100 - Travelstar - Hard Drive PDF manuals and user guides
UPC - 683728198671
View all Hitachi 7K100 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi 7K100 manual content summary:

  • Hitachi 7K100 | Hard Drive Specifications - Page 1
    Hard Disk Drive Specification Hitachi Travelstar 7K100 2.5 inch ATA/IDE hard disk drive Model: HTS721010G9AT00 HTS721080G9AT00 HTS721060G9AT00 Revision 1.3 13 July 2006
  • Hitachi 7K100 | Hard Drive Specifications - Page 2
  • Hitachi 7K100 | Hard Drive Specifications - Page 3
    Hard Disk Drive Specification Travelstar 7K100 2.5 inch ATA/IDE hard disk drive Model: HTS721010G9AT00 HTS721080G9AT00 HTS721060G9AT00 Revision 1.3 13 July 2006
  • Hitachi 7K100 | Hard Drive Specifications - Page 4
    described in this publication at any time. It is possible that this publication may contain reference to, or information about, Hitachi products (machines and programs), programming, or services that are not announced in your country. Such references or information must not be construed to mean that
  • Hitachi 7K100 | Hard Drive Specifications - Page 5
    3.1 Control electronics 9 3.2 Head disk assembly data 9 4.0 Drive characteristics 11 4.1 Formatted capacity 11 4.2 Data sheet 11 4.3 Cylinder error 18 5.7.3 Recovered read errors 18 5.8 ECC...19 6.0 Specification ...21 6.1 Environment 21 6.1.1 Temperature and humidity 21 6.1.2 Radiation
  • Hitachi 7K100 | Hard Drive Specifications - Page 6
    6.3.4 Service life and usage condition 25 6.3.5 Preventive maintenance 25 6.3.6 Load/unload 26 6.4 Mechanical specifications 28 6.4.1 Physical dimensions and weight 28 6.4.2 Mounting hole locations 28 6.4.3 Connector and jumper description 28 6.4.4 Mounting orientation 29 6.4.5 Load/unload
  • Hitachi 7K100 | Hard Drive Specifications - Page 7
    standard 57 10.0 Register ...59 10.1 Alternate Status Register 60 10.2 Command Register 60 10.3 Data Register 60 10.4 Device Control Register 61 10.5 Drive Address Register 61 10.6 Device Register 62 10.7 Error Register 62 10.8 Features Register 63 10.9 LBA High Register 63 10.10 LBA Low
  • Hitachi 7K100 | Hard Drive Specifications - Page 8
    Function 79 11.10.1 Example for operation (In LBA Mode 79 11.10.2 Set Max security extension commands 80 11.11 Address Offset Feature (vendor specific 81 11.11.1 Enable/Disable Address Offset Mode 81 11.11.2 Identify Device Data 82 11.11.3 Exceptions in Address Offset Mode 82 11.12
  • Hitachi 7K100 | Hard Drive Specifications - Page 9
    148 13.30 Security Set Password (F1h 149 13.31 Security Unlock (F2h 151 13.32 Seek (7xh 152 13.33 Sense Condition (F0h: vendor specific 153 13.34 Set Features (EFh 154 13.35 Set Max ADDRESS (F9h 156 13.36 Set Max ADDRESS EXT (37h 158 13.37 Set
  • Hitachi 7K100 | Hard Drive Specifications - Page 10
    39h 191 13.49 Write Sectors (30h/31h 193 13.50 Write Sectors(s) EXT (34h 195 13.51 Write Verify (3Ch: vendor specific 196 14.0 Time-out values 197 15.0 Appendix...199 15.1 Commands Support Coverage 199 15.2 SET FEATURES Commands Support Coverage 201 15.3 Changes from the Travelstar 5K100 202
  • Hitachi 7K100 | Hard Drive Specifications - Page 11
    Table 6. Full stroke seek time 14 Table 7. Single track seek time 15 Table 8. Average latency 15 Table 9. Drive ready time 15 Table 10. Description of operating modes 16 Table 11. Drive ready time 16 Table 12. Environmental condition 21 Table 13. Limits of temperature and humidity 22 Table
  • Hitachi 7K100 | Hard Drive Specifications - Page 12
    65 Table 46. Default Register Values 66 Table 47. Diagnostic codes 66 Table 48. Interpretation of Device 0 Error 67 Table 49. Device behavior by ATA command 68 Table 50. Power conditions 71 Table 51. Command table for device lock operation 78 Table 52. Set Max SET PASSWORD data content 80
  • Hitachi 7K100 | Hard Drive Specifications - Page 13
    149 Table 105. Security Set Password information 149 Table 106. Security Unlock (F2h 151 Table 107. Seek (7xh 152 Table 108. Sense Condition (F0h: vendor specific 153 Table 109. Set Features (EFh 154 Table 110. Set Max ADDRESS (F9h 156 Table 111. Set Max ADDRESS EXT Command (37h 158 Table 112
  • Hitachi 7K100 | Hard Drive Specifications - Page 14
    Table 134. Write Multiple EXT (39h 191 Table 135. Write Sectors Command (30h/31h 193 Table 136. Write Sector(s) EXT Command (34h 195 Table 137. Time-out values 197
  • Hitachi 7K100 | Hard Drive Specifications - Page 15
    1.1 Introduction This document describes the specifications of the Travelstar 7K100, a 2.5-inch hard disk drive with ATA/IDE interface. Drive name Travelstar 7K100-100 Travelstar 7K100-80 Travelstar 7K100-60 Model Number HTS721010G9AT00 HTS721080G9AT00 HTS721060G9AT00 Capacity (GB) 100 80 60
  • Hitachi 7K100 | Hard Drive Specifications - Page 16
    RPM RST R/W sec 1,000,000,000 bits 1,000,000,000 bytes ground hexadecimal hard disk drive Hertz Input integrated lead suspension Input/Output International Standards Organization 1,000 bytes 1000 bits revolutions per minute reset read/write second Travelstar 7K100 Hard Disk Drive Specification 2
  • Hitachi 7K100 | Hard Drive Specifications - Page 17
    discharge (ESD). Any damages incurred to the drive after its removal from the shipping package and the ESD protective bag are the responsibility of the user. 1.5 Drive handling precautions Do not press on the drive cover during handling. Travelstar 7K100 Hard Disk Drive Specification 3
  • Hitachi 7K100 | Hard Drive Specifications - Page 18
    Travelstar 7K100 Hard Disk Drive Specification 4
  • Hitachi 7K100 | Hard Drive Specifications - Page 19
    Watts at idle state • Power on to ready: 4.0 sec • Operating shock: • 2940 m/sec2 (300 G)/2ms • 1568 m/sec2 (160 G)/1ms • Nonoperating shock: 9800 m/sec2 (1000 G)/1ms Travelstar 7K100 Hard Disk Drive Specification 5
  • Hitachi 7K100 | Hard Drive Specifications - Page 20
    Travelstar 7K100 Hard Disk Drive Specification 6
  • Hitachi 7K100 | Hard Drive Specifications - Page 21
    Part 1. Functional specification Travelstar 7K100 Hard Disk Drive Specification 7
  • Hitachi 7K100 | Hard Drive Specifications - Page 22
    Travelstar 7K100 Hard Disk Drive Specification 8
  • Hitachi 7K100 | Hard Drive Specifications - Page 23
    Adaptive Battery Life Extender 3.2 Head disk assembly data The following technologies are used in the drive: • Femto slider • Textured laminated AFC glass disk • GMR head • Integrated lead suspension (ILS) • Load/unload mechanism • Mechanical latch Travelstar 7K100 Hard Disk Drive Specification 9
  • Hitachi 7K100 | Hard Drive Specifications - Page 24
    Travelstar 7K100 Hard Disk Drive Specification 10
  • Hitachi 7K100 | Hard Drive Specifications - Page 25
    Drive characteristics 4.1 Formatted capacity Table 1: Formatted capacities Physical HTS721010G9AT00 512 414-792 4 2 16 63 16,383 156,301,488 80,026,361,856 HTS721060G9AT00 512 414-792 3 2 16 63 16,383 117,210,240 60,011,642, 5.00 127 126 81 24 Travelstar 7K100 Hard Disk Drive Specification 11
  • Hitachi 7K100 | Hard Drive Specifications - Page 26
    4.3 Cylinder allocation Each drive is formatted in the factory test by optimizing TPI/BPI combination. Typical data format is described below. Table 3: Cylinder - 65,859 504 Data Zone 22 65,860 - 68,375 486 Data Zone 23 68,376 - 71,039 459 Travelstar 7K100 Hard Disk Drive Specification 12
  • Hitachi 7K100 | Hard Drive Specifications - Page 27
    /s) Buffer-host data transfer (MB/s) 10 11 7200 4.0 1.0 267 - 629 100 4.4.1 Command overhead Command overhead time is defined as the interval from the time that a drive receives a command to the time that the actuator starts its motion Travelstar 7K100 Hard Disk Drive Specification 13
  • Hitachi 7K100 | Hard Drive Specifications - Page 28
    . A reliable read or write implies that error correction or recovery is not used to correct arrival problems. The average seek time is measured as the weighted average of all possible seek combinations. max the average of 1,000 full stroke seeks. Travelstar 7K100 Hard Disk Drive Specification 14
  • Hitachi 7K100 | Hard Drive Specifications - Page 29
    ready time (sec) Typical Max 4.0 9.5 Ready Power on to Ready The condition in which the drive is able to perform a media access command (for example - read, write) immediately. This includes the time required for the internal self diagnostics. Travelstar 7K100 Hard Disk Drive Specification 15
  • Hitachi 7K100 | Hard Drive Specifications - Page 30
    changed to Standby mode using pin C on the interface connector. See section 7.10, "Drive address setting" on page 51 for details. 4.4.3.4 Adaptive power save control The transient timing from Set Features Enable Adavanced Power Management subcommand. Travelstar 7K100 Hard Disk Drive Specification 16
  • Hitachi 7K100 | Hard Drive Specifications - Page 31
    error status is made available to the host system if any of the following conditions occur after the drive has become ready: • The spindle speed lies outside the requirements for reliable operation • The occurrence of a Write Fault condition Travelstar 7K100 Hard Disk Drive Specification 17
  • Hitachi 7K100 | Hard Drive Specifications - Page 32
    read errors When a read operation for a sector fails and is recovered at the specific ERP step, the sector is reallocated automatically. A media verification sequence may be run prior to the reallocation according to the predefined conditions. Travelstar 7K100 Hard Disk Drive Specification 18
  • Hitachi 7K100 | Hard Drive Specifications - Page 33
    is generated when HDC receives user data from HOST, and can correct up to 1 symbol(10bit) errors on-the-fly when one transfers to HOST. Travelstar 7K100 Hard Disk Drive Specification 19
  • Hitachi 7K100 | Hard Drive Specifications - Page 34
    Travelstar 7K100 Hard Disk Drive Specification 20
  • Hitachi 7K100 | Hard Drive Specifications - Page 35
    sufficient ventilation to maintain a surface temperature below 60ºC at the center of the top cover of the drive and below 63°C at the center of the drive circuit board assembly. The maximum storage period in the shipping package is one year. Travelstar 7K100 Hard Disk Drive Specification 21
  • Hitachi 7K100 | Hard Drive Specifications - Page 36
    Corrosion test The drive must be functional and show no signs of corrosion after being exposed to a temperature humidity stress of 50°C/90% RH (relative humidity) for one week followed by a temperature and humidity drop to 25°C/40%RH in 2 hours. Travelstar 7K100 Hard Disk Drive Specification 22
  • Hitachi 7K100 | Hard Drive Specifications - Page 37
    through a 50-ohm resistor connected to any two mounting screw holes. 6.1.4 Magnetic fields The disk drive will withstand radiation and conductive noise. The test method is defined in the Noise Susceptibility Test Method specification, P/N 95F3944. Travelstar 7K100 Hard Disk Drive Specification 23
  • Hitachi 7K100 | Hard Drive Specifications - Page 38
    a safety extra low voltage (SELV) circuits. The voltage specifications are applied at the power connector of the drive. Table 15: DC power requirements Item Nominal supply Supply voltage Power Consumption of Low Power Idle in Watts/Capacity (GB). Travelstar 7K100 Hard Disk Drive Specification 24
  • Hitachi 7K100 | Hard Drive Specifications - Page 39
    (S.M.A.R.T.) The drive supports the Self-Monitoring ATA-6. • The power-off sequence of the drive should comply with the required power off sequence described in Section 6.3.6.2, "Required Power-Off Sequence" on page 26. Service life of the drive Travelstar 7K100 Hard Disk Drive Specification 25
  • Hitachi 7K100 | Hard Drive Specifications - Page 40
    . The drive supports a minimum Hitachi recommends that the switch operate under control of the BIOS rather than be hardwired. The same recommendation is made for cover-close switches. When a hardwired switch is turned off, emergency unload occurs, as Travelstar 7K100 Hard Disk Drive Specification
  • Hitachi 7K100 | Hard Drive Specifications - Page 41
    problems Hitachi recommends that the power-off portion of the cycle contain the sequence specified in Section 6.3.6.2, "Required Power-Off Sequence" on page 26. If this is not done, the emergency unload function is invoked and nontypical stress results. Travelstar 7K100 Hard Disk Drive Specification
  • Hitachi 7K100 | Hard Drive Specifications - Page 42
    and size of the drive are shown below. 6.4.3 Connector and jumper description A jumper is used to designate the drive address as either master or slave. The jumper setting method is described in Section 7.10, "Drive address setting" on page 51. Travelstar 7K100 Hard Disk Drive Specification 28
  • Hitachi 7K100 | Hard Drive Specifications - Page 43
    , or storage. Upon power down, a head unload mechanism secures the heads at the unload position. See Section 6.5.4, "Nonoperating shock" on page 31 for additional details. Travelstar 7K100 Hard Disk Drive Specification 29
  • Hitachi 7K100 | Hard Drive Specifications - Page 44
    vibration Table 19: Swept sine vibration Swept sine vibration (zero to peak 5 to 500 to 5 Hz sine wave) 9.8 m/sec2 (1 G) (5-500 Hz) Sweep rate (oct/min) 2.0 Travelstar 7K100 Hard Disk Drive Specification 30
  • Hitachi 7K100 | Hard Drive Specifications - Page 45
    normal system. 6.5.4 Nonoperating shock The drive withstands the following half-sine shock pulse without any data loss or permanent damage. Table 22: Nonoperating shock Duration of 1 ms 9800 m/sec2 (1000 G) Duration of 11 ms 1470 m/sec2 (150 G) Travelstar 7K100 Hard Disk Drive Specification 31
  • Hitachi 7K100 | Hard Drive Specifications - Page 46
    only when determining compliance. Lwt(spec) = Lw = 0.1Pt + 0.3 < 4.0 (Bels) where Lw = A-weighted sound power level Pt = Value of desecrate tone penalty = dLt - 6.0(dBA) dLt = Tone-to-noise ratio taken in accordance with ISO 7779 at each octave band Travelstar 7K100 Hard Disk Drive Specification 32
  • Hitachi 7K100 | Hard Drive Specifications - Page 47
    • RFI Japan VCCI, Requirements of Hitachi products • EU EMC Directive, Technical Requirements and Conformity Assessment Procedures 6.8.1 CE mark The drive is certified for compliance with EC directive MIC standards are likewise based on IEC standards. Travelstar 7K100 Hard Disk Drive Specification 33
  • Hitachi 7K100 | Hard Drive Specifications - Page 48
    circuit boards used in this drive are made of material with drive from its electrical short circuit problem. A 10 amp limit is required for safety purposes. 6.10 Packaging The drive is packed in ESD protective bags and shipped in appropriate containers. Travelstar 7K100 Hard Disk Drive Specification
  • Hitachi 7K100 | Hard Drive Specifications - Page 49
    location. Pin 43 19 1 CA 44 22 Pin Pin position 20 is left blank for correct connector insertion. Pin positions A, B, C, and D are used for the drive address setting. 2 DB Travelstar 7K100 Hard Disk Drive Specification 35
  • Hitachi 7K100 | Hard Drive Specifications - Page 50
    transfer mode was previously chosen via SetFeatures. The drive becomes aware of this change upon assertion of the DMACK- line. These lines revert back to their original definitions upon the deassertion of DMACK at the termination of the DMA burst. Travelstar 7K100 Hard Disk Drive Specification 36
  • Hitachi 7K100 | Hard Drive Specifications - Page 51
    the state of the IRQ bit. The interrupt is set when the IRQ bit is set by the drive CPU. The IRQ is reset to zero by a host read of the status register or a write to the Command Register. This signal is a 3-state line with 16mA of sink capability. Travelstar 7K100 Hard Disk Drive Specification 37
  • Hitachi 7K100 | Hard Drive Specifications - Page 52
    when the drive needs some additional WAIT cycle(s) to extend the PIO cycle. This line can be connected to the host IORDY signal in order to insert a WAIT state(s) into the host PIO cycle. This signal is an Open-Drain output with 16mA sink capability. Travelstar 7K100 Hard Disk Drive Specification 38
  • Hitachi 7K100 | Hard Drive Specifications - Page 53
    and the second is the "+5 V Motor" input pin. These two input pins are tied together within the drive. DMACKThis signal shall be used by the host in response to DMARQ to either acknowledge that data has been to pause an Ultra DMA data in transfer. Travelstar 7K100 Hard Disk Drive Specification 39
  • Hitachi 7K100 | Hard Drive Specifications - Page 54
    7.5 Interface logic signal levels The interface logic signals have the following electrical specifications: Inputs Outputs Current Input High Voltage (ViH) Input Low Voltage (ViL) 2.0 V min./5.5 V max. - low width Min (µs) - 25 Max (µs) 9.5 - Travelstar 7K100 Hard Disk Drive Specification 40
  • Hitachi 7K100 | Hard Drive Specifications - Page 55
    IORDY t9 t1 t0 t2 t2i t3 t4 t7(*) tA t5 tRD tB t6 t6z t8(*) (*) Up to ATA-2 (mode-0,1,2) Table 27: PIO cycle timings PARAMETER DESCRIPTION t0 Cycle time t1 Address valid to DIOR-/DIOW- 20 10 20 5 - 10 0 - - MAX (ns 30 - - 35 1,250 Travelstar 7K100 Hard Disk Drive Specification 41
  • Hitachi 7K100 | Hard Drive Specifications - Page 56
    7.8 Multi word DMA timings The Multi word DMA timings meet Mode 2 of the ATA-6 description. DMARQ tLR/tLW DMACKDIOR-/DIOWREAD DD(15:0) WRITE DD(15:0) t0 tI tD to read data released MIN (ns) 120 70 - 5 20 10 0 5 25 - - MAX (ns) - - 50 35 25 Travelstar 7K100 Hard Disk Drive Specification 42
  • Hitachi 7K100 | Hard Drive Specifications - Page 57
    tENV tZIORDY DSTROBE tAZ DD(15:0) xxxxxxxxxxxxxxxxxxxxxxxxxxx Host drives DD t2CYC tFS tCYC tCYC tZAD tDS tDH xxx RD 10 0 - 5 - 5 - MODE 5 MIN MAX (ns) (ns) 0 - 20 - 20 50 0 - 0 90 16.8 - 38 - - 10 0 - 4 - 4.6 - Travelstar 7K100 Hard Disk Drive Specification 43
  • Hitachi 7K100 | Hard Drive Specifications - Page 58
    - 50 Note: When a host does not satisfy the tSR timing, the host should be ready to receive two more data words after HDMARDY - is negated. Travelstar 7K100 Hard Disk Drive Specification 44
  • Hitachi 7K100 | Hard Drive Specifications - Page 59
    tAZ tDS xxx RD Data xxxxxxxxxxxxxxxxxx xxx CRC xxxxxxxxxx tZAH Device drives DD Host drives DD Table 31: Ultra DMA cycle timings (Host Terminating Read) - - 20 MODE 5 MIN MAX (ns) (ns) - 50 85 - 0 75 - 10 20 - 20 - 4 - 4.6 - 20 - - 20 Travelstar 7K100 Hard Disk Drive Specification 45
  • Hitachi 7K100 | Hard Drive Specifications - Page 60
    tAZ xxxxx tZAH tDH tDS xxxxxxxxxxxxxxxxxx CRC xxxxxxxxxx Device drives DD Host drives DD Table 32: Ultra DMA cycle timings (Device 20 - 5 - 5 - 20 - - 20 MODE 5 MIN MAX (ns) (ns) 50 - 0 75 - 10 20 - 20 - 4 - 4.6 - - - - 20 Travelstar 7K100 Hard Disk Drive Specification 46
  • Hitachi 7K100 | Hard Drive Specifications - Page 61
    interlock time Setup time for DMACKEnvelope time Minimum time before driving IORDY Limited interlock time Cycle time Two cycle time Data 100 25 - 57 - 5 - 5 - MODE 5 MIN MAX (ns) (ns) 0 - 20 - 20 55 0 - 0 75 16.8 - 38 - 4 - 4.6 - Travelstar 7K100 Hard Disk Drive Specification 47
  • Hitachi 7K100 | Hard Drive Specifications - Page 62
    ) (ns) - - - 50 Note: When a device does not satisfy the tSR timing, the device is ready to receive two more data words after DDMARDY- is negated. Travelstar 7K100 Hard Disk Drive Specification 48
  • Hitachi 7K100 | Hard Drive Specifications - Page 63
    tACK tDH tDS xxx WT Data xxxxxxxxxxxxxxxxxxxxxxxxxx CRC xxxxxxxxxx Host drives DD Table 35: Ultra DMA cycle timings (Device TerminatingWrite) 100 20 - 5 - 5 - 20 - - 20 MODE 5 MIN MAX (ns) (ns) - 50 85 - 0 75 20 - 4 - 4.6 - 20 - - 20 Travelstar 7K100 Hard Disk Drive Specification 49
  • Hitachi 7K100 | Hard Drive Specifications - Page 64
    tIORDYZ tACK tLI tACK tDH tDS xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx CRC xxxxxxxxxx Host drives DD Table 36: Ultra DMA cycle timings (Host 0 100 20 - 5 - 5 - 20 - - 20 MODE 5 MIN MAX (ns) (ns) 50 - 0 75 20 - 4 - 4.6 - 20 - - 20 Travelstar 7K100 Hard Disk Drive Specification 50
  • Hitachi 7K100 | Hard Drive Specifications - Page 65
    does not spin up at POR. When the drive address is Cable Select, the address depends on the condition of pin 28 of the AT interface cable. If pin 28 is ground (or low), the drive is a Master. If pin 28 is open (or logic high), the drive is a Slave. Travelstar 7K100 Hard Disk Drive Specification 51
  • Hitachi 7K100 | Hard Drive Specifications - Page 66
    7.11 Addressing of HDD registers The host addresses the drive through a set of registers called a Task File. These registers are mapped into the Reg. Command Reg. Control Block Registers Alt. Status Reg. Device control Reg. Drive address Reg. - Travelstar 7K100 Hard Disk Drive Specification 52
  • Hitachi 7K100 | Hard Drive Specifications - Page 67
    Part 2. Interface specification Travelstar 7K100 Hard Disk Drive Specification 53
  • Hitachi 7K100 | Hard Drive Specifications - Page 68
    Travelstar 7K100 Hard Disk Drive Specification 54
  • Hitachi 7K100 | Hard Drive Specifications - Page 69
    from standard" on page 57. The drive supports the following functions as Vendor Specific Functions: • Address Offset Feature • Format Unit Function • SENSE CONDITION command 8.2 Terminology Device Host First Command INTRQ The Travelstar 7K100 drive Host indicates the system to which the
  • Hitachi 7K100 | Hard Drive Specifications - Page 70
    Travelstar 7K100 Hard Disk Drive Specification 56
  • Hitachi 7K100 | Hard Drive Specifications - Page 71
    drive conforms to the referenced specifications, with the exception of the deviations described below. The interface conforms to the Working Document of Information Technology, AT Attachment with Packet Interface Extension (ATA reliability status. Travelstar 7K100 Hard Disk Drive Specification 57
  • Hitachi 7K100 | Hard Drive Specifications - Page 72
    Travelstar 7K100 Hard Disk Drive Specification 58
  • Hitachi 7K100 | Hard Drive Specifications - Page 73
    sending commands to the device or posting status from the device. The Control Block Registers are used for device control and to post alternate status. Travelstar 7K100 Hard Disk Drive Specification 59
  • Hitachi 7K100 | Hard Drive Specifications - Page 74
    ECC byte transfers, which are 8 bits wide. Data transfers are PIO only. The register contains valid data only when DRQ = 1 is in the Status Register. Travelstar 7K100 Hard Disk Drive Specification 60
  • Hitachi 7K100 | Hard Drive Specifications - Page 75
    . -Drive Select 1. The Drive Select bit for device 1 is active low. DS1 = 0 when device 1 (slave) is selected and active. -Drive Select 0. The Drive Select bit for device 0 is active low. DS0 = 0 when device 0 (master) is selected and active. Travelstar 7K100 Hard Disk Drive Specification 61
  • Hitachi 7K100 | Hard Drive Specifications - Page 76
    selected. HS3, HS2, HS1, HS0 These contain bits 24-27 of the LBA. At command completion these bits are updated to reflect the current LBA bits 24-27. 10.7 Error Register Table 43: Error Register 7 6 5 4 3 ID field for the requested sector. Travelstar 7K100 Hard Disk Drive Specification 62
  • Hitachi 7K100 | Hard Drive Specifications - Page 77
    LBA Mid Register This register contains Bits 8-15. At the end of the command, this register is updated to reflect the current LBA Bits 8-15. When 48-bit addressing commands are used, the "most definitions are given in the command descriptions. Travelstar 7K100 Hard Disk Drive Specification 63
  • Hitachi 7K100 | Hard Drive Specifications - Page 78
    DF DSC DRQ CORR IDX ERR This register contains the device status. The contents of this register are updated whenever an error occurs and at the completion of each command. If the host reads this register when command is received from the host. Travelstar 7K100 Hard Disk Drive Specification 64
  • Hitachi 7K100 | Hard Drive Specifications - Page 79
    the power on defaults. In the case of sleep mode, the drive goes to standby mode. In other cases, the device does not change current mode. After reset the Standby timer value is set to 109 minutes. Set according to the initial power mode selection. Travelstar 7K100 Hard Disk Drive Specification 65
  • Hitachi 7K100 | Hard Drive Specifications - Page 80
    A0h 50h 50h The meaning of the Error Register diagnostic codes resulting from power on, hard reset, or the Execute Device Diagnostic command are shown in the table below. Table 47: circuitry error Controller microprocessor error Device 1 failed Travelstar 7K100 Hard Disk Drive Specification 66
  • Hitachi 7K100 | Hard Drive Specifications - Page 81
    For each Reset and Execute Device Diagnostic, the diagnostic is done as follows: Power On Reset, Hard Reset Soft Reset Execute Device Diagnostic DASP- is read by Device 0 to determine if Device 1 No Yes No Error Register 01h 0xh 81h 8xh 01h 0xh Travelstar 7K100 Hard Disk Drive Specification 67
  • Hitachi 7K100 | Hard Drive Specifications - Page 82
    of problems which can occur on most drives when power is removed at an arbitrary time: • Data is lost from the write buffer. • If the drive hard error. • Heads may land in the data zone instead of the landing zone depending on the design of the drive. Travelstar 7K100 Hard Disk Drive Specification
  • Hitachi 7K100 | Hard Drive Specifications - Page 83
    actual physical CHS location of the data sector on the disk media. The drive supports both Logical CHS Addressing Mode and LBA Addressing Mode as the sector addressing mode LBA bits 27-24
  • Hitachi 7K100 | Hard Drive Specifications - Page 84
    commands and a timer that enables a device to implement low power consumption modes. The drive implements the following set of functions: • A Standby timer • Idle command • Idle until the spindle motor is stopped. 7. Perform the post process. Travelstar 7K100 Hard Disk Drive Specification 70
  • Hitachi 7K100 | Hard Drive Specifications - Page 85
    soft reset to wake up a device. 11.6.7 Initial Power Mode at Power On After power on or hard reset the device goes to IDLE mode or STANDBY mode depending on the option. Refer to section 4.4.3 power management levels. Device power consumption may Travelstar 7K100 Hard Disk Drive Specification 71
  • Hitachi 7K100 | Hard Drive Specifications - Page 86
    state. The IDENTIFY DEVICE response word 83, bit 3 indicates that Advanced Power Management feature is supported if set. Word 86, bit 3 indicates that Advanced Power Management is enabled if set. Word time switching from this mode to Active mode. Travelstar 7K100 Hard Disk Drive Specification 72
  • Hitachi 7K100 | Hard Drive Specifications - Page 87
    or in the field by after-market products. 11.8.1 Attributes Attributes are the specific performance or calibration parameters that are used in analyzing the status of the device values, attribute thresholds and other logging and reporting information. Travelstar 7K100 Hard Disk Drive Specification 73
  • Hitachi 7K100 | Hard Drive Specifications - Page 88
    is removed from the computer. New commands are supported for this feature as listed below: Security Set Unit command. The device enables all commands except those which can update the device lock function, set/change password. The device enters this Travelstar 7K100 Hard Disk Drive Specification 74
  • Hitachi 7K100 | Hard Drive Specifications - Page 89
    Device Lock Function, and then the device is locked on the next power on reset or hard reset. The system manufacturer or dealer who intends to enable the device lock function for end Power off POR Device unlocked mode Figure 2: Initial setting Travelstar 7K100 Hard Disk Drive Specification 75
  • Hitachi 7K100 | Hard Drive Specifications - Page 90
    , Erase Unit, Unlock commands. Figure 3: Usual operation for POR (*1) - refers to the commands in Table 51: "Command table for device lock operation" on page 78. Travelstar 7K100 Hard Disk Drive Specification 76
  • Hitachi 7K100 | Hard Drive Specifications - Page 91
    128 in Identify Device information is set, and the SECURITY ERASE UNIT command and the SECURITY UNLOCK command are then aborted until there is a hard reset or a power off. The count and EXPIRE bit are cleared after a power on reset or a hard reset. Travelstar 7K100 Hard Disk Drive Specification 77
  • Hitachi 7K100 | Hard Drive Specifications - Page 92
    Standby Immediate o o o Write Buffer o o o Write DMA x o o Write DMA EXT x o o Write Long x o o Write Multiple x o o Write Multiple EXT x o o Write Sector(s) x o o Write Sector(s) EXT x o o Write Verify x o o Travelstar 7K100 Hard Disk Drive Specification 78
  • Hitachi 7K100 | Hard Drive Specifications - Page 93
    capacity of 536 MB, flagging the media defects not visible by the system. 2. Preparing drives at the system manufacturer Special utility software is required to define the size of the protected ADDRESS command to 0FBFFFh with nonvolatile option. Travelstar 7K100 Hard Disk Drive Specification 79
  • Hitachi 7K100 | Hard Drive Specifications - Page 94
    device because the device behaves like a 528 MB device. 3. Conventional usage without system software support: Because the drive works as a 528 MB device, there is no special care required for normal use of the device is in the Set Max Frozen mode. Travelstar 7K100 Hard Disk Drive Specification 80
  • Hitachi 7K100 | Hard Drive Specifications - Page 95
    , the command fails with Abort error status. Disable Address Offset Feature removes the address offset and sets the size of the drive reported by the Identify Device command back to the size specified in the last nonvolatile Set Max Address command. Travelstar 7K100 Hard Disk Drive Specification 81
  • Hitachi 7K100 | Hard Drive Specifications - Page 96
    Set Feature 11.11.2 Identify Device Data Identify Device data, word 83, bit 7 indicates the device supports the Address Offset Feature. Identify Device data, word 86, bit 7 indicates the device is in if they are enabled by the Set Feature command. Travelstar 7K100 Hard Disk Drive Specification 82
  • Hitachi 7K100 | Hard Drive Specifications - Page 97
    measurement must include the device and host command overhead. To eliminate this overhead, the drive overlaps the seek command as described below. The first seek command completes before the and then confirming the completion of the issued command. Travelstar 7K100 Hard Disk Drive Specification 83
  • Hitachi 7K100 | Hard Drive Specifications - Page 98
    When a read operation for a sector fails once and then is recovered at the specific ERP step, this sector of data is reallocated automatically. A media verification sequence may be run prior to the relocation according to the predefined conditions. Travelstar 7K100 Hard Disk Drive Specification 84
  • Hitachi 7K100 | Hard Drive Specifications - Page 99
    gets written by a register write regardless of the state of HOB in the Device Control register. Support of the 48-bit Address feature set is indicated in the Identify Device response bit 10 word Native Max Address shall return a value of 268,435,455. Travelstar 7K100 Hard Disk Drive Specification 85
  • Hitachi 7K100 | Hard Drive Specifications - Page 100
    Travelstar 7K100 Hard Disk Drive Specification 86
  • Hitachi 7K100 | Hard Drive Specifications - Page 101
    A command should only be interrupted by a reset at times when the host thinks there may be a problem, such as a device that is no longer responding. Interrupts are cleared when the host reads the Status (or block) of data via the Data Register. Travelstar 7K100 Hard Disk Drive Specification 87
  • Hitachi 7K100 | Hard Drive Specifications - Page 102
    Unit • Security Set Password • Security Unlock • Set Max SET PASSWORD • Set Max UNLOCK • S.M.A.R.T. Write log sector • Write Buffer • Write Long • Write Multiple • Write Multiple EXT Travelstar 7K100 Hard Disk Drive Specification 88
  • Hitachi 7K100 | Hard Drive Specifications - Page 103
    . 12.3 Non-data commands The following are Non-data commands: • Check Power Mode • Device Configuration FREEZE LOCK • Device Configuration RESTORE • Execute Device Diagnostic • Flush Cache Travelstar 7K100 Hard Disk Drive Specification 89
  • Hitachi 7K100 | Hard Drive Specifications - Page 104
    host. e. In response to the interrupt, the host reads the Status Register. f. The device clears the interrupt in response to the Status Register being read. Travelstar 7K100 Hard Disk Drive Specification 90
  • Hitachi 7K100 | Hard Drive Specifications - Page 105
    the host. 7. The host resets the Slave DMA channel. 8. The host reads the Status Register and, optionally, the Error Register. Refer to Section 7.0, "Electrical interface specification" on page 35 for further details. Travelstar 7K100 Hard Disk Drive Specification 91
  • Hitachi 7K100 | Hard Drive Specifications - Page 106
    Travelstar 7K100 Hard Disk Drive Specification 92
  • Hitachi 7K100 | Hard Drive Specifications - Page 107
    96 shows the subcommands that are supported by each command or feature. Table 0 0 0 0 0 0 0 1 0 0 0 0 0 1 0 1 0 0 0 0 1 0 0 0 0 1 - - - 1 1 1 1 1 0 1 0 1 1 1 1 0 0 1 1 1 1 1 1 0 1 0 0 1 1 1 1 0 1 0 1 1 1 1 1 0 0 0 1 1 1 1 1 0 0 1 0 0 1 1 1 - - - - Travelstar 7K100 Hard Disk Drive Specification 93
  • Hitachi 7K100 | Hard Drive Specifications - Page 108
    1 0 1 0 1 0 0 1 1 1 1 0 1 0 1 1 0 0 0 0 1 0 0 1 1 0 0 1 0 0 0 1 1 0 0 1 1 1 1 0 0 0 1 0 1 0 0 1 1 1 0 0 1 0 0 1 1 0 0 0 0 0 0 1 1 0 0 0 1 0 0 1 1 0 1 0 0 0 0 1 1 1 1 0 0 Commands marked * are alternate command codes for previously defined commands Travelstar 7K100 Hard Disk Drive Specification 94
  • Hitachi 7K100 | Hard Drive Specifications - Page 109
    Protocol: 1 : PIO data IN command 3 : Non data command + : Vendor specific command 2 : PIO data OUT command 4 : DMA command Travelstar 7K100 Hard Disk Drive Specification 95
  • Hitachi 7K100 | Hard Drive Specifications - Page 110
    04 B1 CO B1 C1 B1 C2 B1 C3 The "Command set" table beginning on page page 93 shows the commands that are supported by the device. The "Command Set (Subcommand)" table above shows the sub-commands that are supported by each command or fea- Travelstar 7K100 Hard Disk Drive Specification 96
  • Hitachi 7K100 | Hard Drive Specifications - Page 111
    . The command descriptions show the contents of the Status and Error Registers after the device has completed processing the command and has interrupted the host. Travelstar 7K100 Hard Disk Drive Specification 97
  • Hitachi 7K100 | Hard Drive Specifications - Page 112
    if the spindle motor is at speed and the device is not in Standby or Sleep mode. Otherwise, the Sector Count Register is set to 0. Travelstar 7K100 Hard Disk Drive Specification 98
  • Hitachi 7K100 | Hard Drive Specifications - Page 113
    CONFIGURATION FREEZE LOCK condition shall be cleared by a power-down. The DEVICE CONFIGURATION FREEZE LOCK condition shall not be cleared by hardware or software reset. Travelstar 7K100 Hard Disk Drive Specification 99
  • Hitachi 7K100 | Hard Drive Specifications - Page 114
    IDENTIFY DEVICE command response. When the bits in these words are cleared, the device no longer supports the indicated command, mode, or feature set. If a bit is set in the overlay = bit 3 is invalid = now Security feature set is enabled Travelstar 7K100 Hard Disk Drive Specification 100
  • Hitachi 7K100 | Hard Drive Specifications - Page 115
    to disable any feature enabled 05h Device is now SET MAX Locked or Frozen mode 06h Protected area is now established 07h DCO is not supported 08h Subcommand code is invalid FFh other reason Travelstar 7K100 Hard Disk Drive Specification 101
  • Hitachi 7K100 | Hard Drive Specifications - Page 116
    bit definitions do not apply to this command. Instead, the register contains a diagnostic code. See Table 47: "Diagnostic codes" on page 66 for the definition. Travelstar 7K100 Hard Disk Drive Specification 102
  • Hitachi 7K100 | Hard Drive Specifications - Page 117
    a status of RDY = 1 and DSC = 1 (50h) after the following sequence: • Data in the write cache buffer is written to the disk media. • Return a successful completion Travelstar 7K100 Hard Disk Drive Specification 103
  • Hitachi 7K100 | Hard Drive Specifications - Page 118
    the device to complete writing data from its cache. The device returns good status after data in the write cache is written to disk media. Travelstar 7K100 Hard Disk Drive Specification 104
  • Hitachi 7K100 | Hard Drive Specifications - Page 119
    13.6 Format Track (50h: vendor specific) Table 64: Format Track command (50h) Command Block Output Registers Register 7 6 5 4 3 2 1 0 Data Feature Sector Count LBA Low V V V V V V V V LBA Mid V V V V V V V V the specified LBA. Travelstar 7K100 Hard Disk Drive Specification 105
  • Hitachi 7K100 | Hard Drive Specifications - Page 120
    from LBA 0 to Native MAX LBA. Host MAX LBA is set by Initialize Drive Parameter or Set MAX ADDRESS command is ignored. The protected area by Set MAX command is shown below. HTS721010G9AT00 HTS721080G9AT00 HTS721060G9AT00 70 min 52 min 40 min Travelstar 7K100 Hard Disk Drive Specification 106
  • Hitachi 7K100 | Hard Drive Specifications - Page 121
    the host. The device will transfer a sector to the host containing the information beginning in Table 67: "Identify device information. (Part 1 of 7)" on page 108. Travelstar 7K100 Hard Disk Drive Specification 107
  • Hitachi 7K100 | Hard Drive Specifications - Page 122
    1) 00XXH XXXX (Note 1) 8010H Description drive classibit assignments fication 15(=0) 1=ATAPI device, 0=ATA device * 14(=0) 1=format speed tolerance gap vendor specific. Note 1. See Table 74: "Number of cylinders/heads/sectors" on page 115. Travelstar 7K100 Hard Disk Drive Specification 108
  • Hitachi 7K100 | Hard Drive Specifications - Page 123
    DMA mode 2 is supported 1 1=Multiword DMA mode 1 is supported 0 1=Multiword DMA mode 0 is supported * indicates the use of those parameters that are vendor specific. Note 1. See Table 74: "Number of cylinders/heads/sectors" on page 115. Travelstar 7K100 Hard Disk Drive Specification 109
  • Hitachi 7K100 | Hard Drive Specifications - Page 124
    Feature Set 2(=0) 1=supports Removable Media Feature Set ** 1(=1) 1=supports Security Feature Set ** 0(=1) 1=supports S.M.A.R.T. Feature Set ** indicates a feature that is able to be unsupported by the Device Configuration Overlay command. Travelstar 7K100 Hard Disk Drive Specification 110
  • Hitachi 7K100 | Hard Drive Specifications - Page 125
    Set 1(=X) 1=Security Feature Set enabled 0(=X) 1=S.M.A.R.T. Feature Set enabled * indicates the use of those parameters that are vendor specific. ** indicates a feature that is able to be unsupported by the Device Configuration Overlay command. Travelstar 7K100 Hard Disk Drive Specification 111
  • Hitachi 7K100 | Hard Drive Specifications - Page 126
    0000H Time required for Enhanced security erase completion 0000 : Not supported * indicates the use of those parameters that are vendor specific. ** indicates a feature that is able to be unsupported by the Device Configuration Overlay command. Travelstar 7K100 Hard Disk Drive Specification 112
  • Hitachi 7K100 | Hard Drive Specifications - Page 127
    -bit Address feature set 0000H Reserved 0000H Removable Media Status Notification feature set Note 1. See Table 74: "Number of cylinders/heads/sectors" on page 115. Travelstar 7K100 Hard Disk Drive Specification 113
  • Hitachi 7K100 | Hard Drive Specifications - Page 128
    Maximum, 0= High 7-6(=0) Reserved 5(=0) 1=Enhanced security erase supported 4(=0) 1=Security count expired 3(=0) 1=Security Frozen 2(=0) 1=Security 7-0(=A5h) Signature * indicates the use of those parameters that are vendor specific. Travelstar 7K100 Hard Disk Drive Specification 114
  • Hitachi 7K100 | Hard Drive Specifications - Page 129
    revision HTS721060G9AT00 Number of cylinders Number of heads Buffer size Total number of user addressable sectors MCxOAxxx 3FFFh 10h 3AE6h 6FC7C80h Microcode revision is referred to section "7.8 Identify Device (ECh)," word 23-26. This is 8 characters in ASCII. Travelstar 7K100 Hard Disk Drive
  • Hitachi 7K100 | Hard Drive Specifications - Page 130
    with no device access from the host. The time-out interval will be reinitialized if there is a device access before the time-out interval expires. Travelstar 7K100 Hard Disk Drive Specification 116
  • Hitachi 7K100 | Hard Drive Specifications - Page 131
    is spinning and ready to respond to the host commands immediately. The Idle Immediate command will not affect the auto power down time-out parameter. Travelstar 7K100 Hard Disk Drive Specification 117
  • Hitachi 7K100 | Hard Drive Specifications - Page 132
    occur: • Another Initialize Device Parameters command is received. • The device is powered off. • A hard reset occurs. • A soft reset occurs and the Set Feature option of CCh is set. Output per cylinder. The minimum is 0 and the maxi- mum is 15. Travelstar 7K100 Hard Disk Drive Specification 118
  • Hitachi 7K100 | Hard Drive Specifications - Page 133
    Write Buffer command. The contents of the sector may be different if any reads or writes have occurred since the Write Buffer command was issued. Travelstar 7K100 Hard Disk Drive Specification 119
  • Hitachi 7K100 | Hard Drive Specifications - Page 134
    transferred. (L = 0). In LBA mode this register specifies the LBA bits 24-27 to be transferred. (L = 1) R This indicates the retry bit, but this bit is ignored. Travelstar 7K100 Hard Disk Drive Specification 120
  • Hitachi 7K100 | Hard Drive Specifications - Page 135
    -23 (High). (L=1) H This indicates the head number of the sector to be transferred. (L = 0) In LBA mode this register contains the current LBA bits 24-27. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 121
  • Hitachi 7K100 | Hard Drive Specifications - Page 136
    (31-24) LBA Mid Current LBA (15-8) LBA Mid Previous LBA (39-32) LBA High Current LBA (23-16) LBA High Previous LBA (47-40) Travelstar 7K100 Hard Disk Drive Specification 122
  • Hitachi 7K100 | Hard Drive Specifications - Page 137
    =0) LBA (23-16) of the address of the first unrecoverable error LBA High (HOB=1) LBA (47-40) of the address of the first unrecoverable error Travelstar 7K100 Hard Disk Drive Specification 123
  • Hitachi 7K100 | Hard Drive Specifications - Page 138
    sectors to be read from the specified log low order, bits (7:0). The log transferred by the drive shall start at the sector in the specified log at the specified offset, regardless of the sector of the log to be read high order, bits (15:8). Travelstar 7K100 Hard Disk Drive Specification 124
  • Hitachi 7K100 | Hard Drive Specifications - Page 139
    . If the feature set associated with the log specified in the Sector Number register is not supported or enabled, or if the values in the Sector Count, Sector Number or Cylinder Low registers in the log at address FFh (15:8) 1 1FEh 1 1FFh 512 Travelstar 7K100 Hard Disk Drive Specification 125
  • Hitachi 7K100 | Hard Drive Specifications - Page 140
    structure Table 85: Extended Error log data structure Description 1st error log data structure 2nd error log data structure Bytes 18 18 Offset 00h 12h Travelstar 7K100 Hard Disk Drive Specification 126
  • Hitachi 7K100 | Hard Drive Specifications - Page 141
    most recently written contents of the register. Bits (15:8) refer to the contents of the register prior to the most recent write to the register Travelstar 7K100 Hard Disk Drive Specification 127
  • Hitachi 7K100 | Hard Drive Specifications - Page 142
    xBh-xFh State Unknown Sleep Standby Active/Idle SMART Off-line or Self-test Reserved Vendor specific 13.15.2.4 Device error count This field shall contain the total number of errors attributable to that comprise the Extended SMART self-test log. Travelstar 7K100 Hard Disk Drive Specification 128
  • Hitachi 7K100 | Hard Drive Specifications - Page 143
    The Extended SMART self-test log sector shall support 48-bit and 28-bit addressing. All 28-bit (31:24) Failing LBA (39:32) Failing LBA (47:40) Vendor specific Bytes 1 1 2 1 1 1 1 1 1 1 15 26 Offset 00h 01h 02h 04h 05h 06h 07h 08h 09h 0AH 0BH Travelstar 7K100 Hard Disk Drive Specification 129
  • Hitachi 7K100 | Hard Drive Specifications - Page 144
    . (L = 1) R This indicates the retry bit; this bit is ignored. Input parameters from the device Sector Count This indicates the number of requested sectors not transferred Travelstar 7K100 Hard Disk Drive Specification 130
  • Hitachi 7K100 | Hard Drive Specifications - Page 145
    of an emulation. Use of the 40 byte ECC mode is recommended for testing the effectiveness and integrity of the ECC functions of the device. Travelstar 7K100 Hard Disk Drive Specification 131
  • Hitachi 7K100 | Hard Drive Specifications - Page 146
    an unrecoverable error occurs. LBA Low This indicates the sector number of the last transferred sector. (L = 0) In LBA mode, this register contains current LBA bits 0-7. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 132
  • Hitachi 7K100 | Hard Drive Specifications - Page 147
    (Mid), 16-23 (High). (L = 1) This indicates the head number of the last transferred sector. (L = 0) In LBA mode, this register contains current LBA bits 24-27. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 133
  • Hitachi 7K100 | Hard Drive Specifications - Page 148
    =0) LBA (23-16) of the address of the first unrecoverable error LBA High (HOB=1) LBA (47-40) of the address of the first unrecoverable error Travelstar 7K100 Hard Disk Drive Specification 134
  • Hitachi 7K100 | Hard Drive Specifications - Page 149
    DF DSC DRQ COR IDX ERR 0 V0- - 0 - V This command returns the native max LBA/CYL of the drive which is not effected by the Set Max ADDRESS command. Even if the Address Offset mode is enabled, the native max This indicates that the bit is not used Travelstar 7K100 Hard Disk Drive Specification 135
  • Hitachi 7K100 | Hard Drive Specifications - Page 150
    =0) LBA (23-16) of the address of the Native max areas. LBA High (HOB=1) LBA (47-40) of the address of the Native max areas. Travelstar 7K100 Hard Disk Drive Specification 136
  • Hitachi 7K100 | Hard Drive Specifications - Page 151
    16-23 (High).(L = 1) H This is the head number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 24-27. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 137
  • Hitachi 7K100 | Hard Drive Specifications - Page 152
    (31-24) LBA Mid Current LBA (15-8) LBA Mid Previous LBA (39-32) LBA High Current LBA (23-16) LBA High Previous LBA (47-40) Travelstar 7K100 Hard Disk Drive Specification 138
  • Hitachi 7K100 | Hard Drive Specifications - Page 153
    =0) LBA (23-16) of the address of the first unrecoverable error LBA High(HOB=1) LBA (47-40) of the address of the first unrecoverable error Travelstar 7K100 Hard Disk Drive Specification 139
  • Hitachi 7K100 | Hard Drive Specifications - Page 154
    unrecoverable error occurs. LBA Low This is the sector number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 0-7. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 140
  • Hitachi 7K100 | Hard Drive Specifications - Page 155
    16-23 (High). (L = 1) This is the head number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 24-27. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 141
  • Hitachi 7K100 | Hard Drive Specifications - Page 156
    (31-24) LBA Mid Current LBA (15-8) LBA Mid Previous LBA (39-32) LBA High Current LBA (23-16) LBA High Previous LBA (47-40) Travelstar 7K100 Hard Disk Drive Specification 142
  • Hitachi 7K100 | Hard Drive Specifications - Page 157
    =0) LBA (23-16) of the address of the first unrecoverable error LBA High(HOB=1) LBA (47-40) of the address of the first unrecoverable error Travelstar 7K100 Hard Disk Drive Specification 143
  • Hitachi 7K100 | Hard Drive Specifications - Page 158
    heads from anywhere on the disk to cylinder 0. If the device cannot reach cylinder 0, T0N (Track 0 Not Found) will be set in the Error Register. Travelstar 7K100 Hard Disk Drive Specification 144
  • Hitachi 7K100 | Hard Drive Specifications - Page 159
    the supplied password against the user password stored internally. One indicates that the device should check the given password against the master password stored internally. Travelstar 7K100 Hard Disk Drive Specification 145
  • Hitachi 7K100 | Hard Drive Specifications - Page 160
    immediately before the Format Unit Command. This command is to prevent accidental erasure of the device. This command does not request the transfer of data. Travelstar 7K100 Hard Disk Drive Specification 146
  • Hitachi 7K100 | Hard Drive Specifications - Page 161
    Erase Unit command. If the device receives a Security Erase Unit command without a prior Security Erase Prepare command, the device aborts the security erase unit command. Travelstar 7K100 Hard Disk Drive Specification 147
  • Hitachi 7K100 | Hard Drive Specifications - Page 162
    compared with the Master Password and the User Password. The device only erases all user data. The execution time of this command is shown below: HTS721010G9AT00 HTS721080G9AT00 HTS721060G9AT00 70 min 52 min 40 min Travelstar 7K100 Hard Disk Drive Specification 148
  • Hitachi 7K100 | Hard Drive Specifications - Page 163
    device to enter frozen mode immediately. After this command is completed, the command which updates Security Mode Feature (Device Lock Function) is rejected. Frozen mode is quit only by Unlock • Security Disable Password • Security Erase Unit Travelstar 7K100 Hard Disk Drive Specification 149
  • Hitachi 7K100 | Hard Drive Specifications - Page 164
    device is not locked immediately. The device is locked after the next power on reset or hard reset. When the MASTER password is set by this command, the master password is registered internally password against the master password stored internally. Travelstar 7K100 Hard Disk Drive Specification 150
  • Hitachi 7K100 | Hard Drive Specifications - Page 165
    password previously set is still stored in the drive but may NOT be used to unlock the device. Identifier = Master / Security level = Maximum This combination will set a master password but will NOT enable the security mode feature (lock function). Travelstar 7K100 Hard Disk Drive Specification 151
  • Hitachi 7K100 | Hard Drive Specifications - Page 166
    only reason that an abort error will be returned by the drive AFTER the password information has been sent to the device. If an abort error is returned by the device BEFORE the password data has been sent to the drive, then another problem exists. Travelstar 7K100 Hard Disk Drive Specification 152
  • Hitachi 7K100 | Hard Drive Specifications - Page 167
    register contains the current LBA bits 8-15 (Mid) and bits 16-23 (High). (L = 1) H In LBA mode this register contains the current LBA bits 24-27. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 153
  • Hitachi 7K100 | Hard Drive Specifications - Page 168
    13.33 Sense Condition (F0h: vendor specific) Table 108: Sense Condition (F0h: vendor specific) Command Block Output Registers Register 7 6 5 4 3 2 1 0 Data Feature 0 0 0 0 0 0 0 1 Sector Count LBA Low bit will be set to one. Travelstar 7K100 Hard Disk Drive Specification 154
  • Hitachi 7K100 | Hard Drive Specifications - Page 169
    Error Register if the Feature register contains any undefined values. After the power on reset or hard reset the device is set to the following features as default. Write cache ECC bytes Read cache Disable Advanced Power Management (Note .3) Travelstar 7K100 Hard Disk Drive Specification 155
  • Hitachi 7K100 | Hard Drive Specifications - Page 170
    completion when write cache is enabled. Note 3. When the Feature register is 85h (=Disable Advanced Power Management), the deepest Power Saving mode becomes Active Idle. Travelstar 7K100 Hard Disk Drive Specification 156
  • Hitachi 7K100 | Hard Drive Specifications - Page 171
    60) shall reflect the maximum address set with this command. If the 48-bit Address feature set is supported, the value placed in Identify Device response words (103:100) shall be the same as the value (103:100) shall be the native maximum address. Travelstar 7K100 Hard Disk Drive Specification 157
  • Hitachi 7K100 | Hard Drive Specifications - Page 172
    mode. D The device number bit. Indicates that the device number bit of the Device should be spec- ified. D = 0 selects the master device and D = 1 selects the slave device. CHS mode this register contains the maximum head number (= 15). (L = 0) Travelstar 7K100 Hard Disk Drive Specification 158
  • Hitachi 7K100 | Hard Drive Specifications - Page 173
    reflect the requested value, and words (61:60) shall also be modified. If this command is not supported, the maximum value to be set exceeds the capacity of the device, a host protected area has been command until next power on or hardware reset. Travelstar 7K100 Hard Disk Drive Specification 159
  • Hitachi 7K100 | Hard Drive Specifications - Page 174
    (15-8) LBA Mid (HOB=1) Set Max LBA (39-32) LBA High (HOB=0) Set Max LBA (23-16) LBA High(HOB=1) Set Max LBA (47-40) Travelstar 7K100 Hard Disk Drive Specification 160
  • Hitachi 7K100 | Hard Drive Specifications - Page 175
    of sectors to be transferred for each interrupt. The default block size after power up or hard reset is 0. The Read Multiple and Write Multiple commands are disabled. If an invalid , the Read Multiple and the Write Multiple commands are disabled. Travelstar 7K100 Hard Disk Drive Specification 161
  • Hitachi 7K100 | Hard Drive Specifications - Page 176
    Mode may be incompatible with continued operation of the host system. If the device is already spun down, the spin down sequence is not executed. Travelstar 7K100 Hard Disk Drive Specification 162
  • Hitachi 7K100 | Hard Drive Specifications - Page 177
    Save Attribute Values S.M.A.R.T. Execute Off-line Immediate S.M.A.R.T. Read Log Sector S.M.A.R.T. Write Log Sector S.M.A.R.T. Enable Operations S.M.A.R.T. Disable Operations S.M.A.R.T. Return Status S.M.A.R.T. Enable/Disable Automatic Off-line Travelstar 7K100 Hard Disk Drive Specification 163
  • Hitachi 7K100 | Hard Drive Specifications - Page 178
    of the state of the Attribute Autosave feature. Upon receipt of the S.M.A.R.T. Save Attribute Values subcommand from the host, the device asserts BSY, writes any updated Attribute Values to the Attribute Data sector, clears BSY, and asserts INTRQ. Travelstar 7K100 Hard Disk Drive Specification 164
  • Hitachi 7K100 | Hard Drive Specifications - Page 179
    service the host within two seconds after receipt of the new command. After servicing Data Structure" on page 169) and ATA registers and then executes the command completion The Selective self-test log is updated as the self-test proceeds indicating Travelstar 7K100 Hard Disk Drive Specification 165
  • Hitachi 7K100 | Hard Drive Specifications - Page 180
    Selective self-test, the self-test executions time byte in the Device SMART Data Structure may be updated but the accuracy may not be exact because of the nature of the test span segments. For is aborted and the newly requested self-test is executed. Travelstar 7K100 Hard Disk Drive Specification 166
  • Hitachi 7K100 | Hard Drive Specifications - Page 181
    command will be preserved in the device's Attribute Data Sectors. If the device is re-enabled, these Attribute Values will be updated, as needed, upon receipt of a S.M.A.R.T. Read Attribute Values or a S.M.A.R.T. Save Attribute Values command. Travelstar 7K100 Hard Disk Drive Specification 167
  • Hitachi 7K100 | Hard Drive Specifications - Page 182
    subcommand is vendor specific and will not change the current Automatic Off-Line Data Collection and Off-line Read Scanning status. However, the device may respond with the error code specified in Table 125: "S.M.A.R.T. Error Codes" on page 180. Travelstar 7K100 Hard Disk Drive Specification 168
  • Hitachi 7K100 | Hard Drive Specifications - Page 183
    Values subcommand. All multibyte fields shown in these data structures follow the ATA/ATAPI-6 specification for byte ordering, namely, that the least significant byte occupies the lowest the Attribute Value and Attribute Threshold Data structures. Travelstar 7K100 Hard Disk Drive Specification 169
  • Hitachi 7K100 | Hard Drive Specifications - Page 184
    Any nonzero value in the Attribute ID Number indicates an active attribute. The device supports following Attribute ID Numbers. The names marked with (*) indicate that the corresponding Attribute Sector Count 199 Ultra DMA CRC Error Count Travelstar 7K100 Hard Disk Drive Specification 170
  • Hitachi 7K100 | Hard Drive Specifications - Page 185
    bit = 0, the Attribute Value is updated only during bit Off-Line testing. 2-5 Reserved bits 6-15 Reserved bits If bit = 1, the Attribute Value is updated during OnLine testing or during both On- data collection is aborted with a fatal error. Travelstar 7K100 Hard Disk Drive Specification 171
  • Hitachi 7K100 | Hard Drive Specifications - Page 186
    off-line by host bit 0 The device will suspend off-line data collection activity after an interrupting command and resume it after a vendor specific event 1 The device will abort off-line data collection activity upon receipt of a new command Travelstar 7K100 Hard Disk Drive Specification 172
  • Hitachi 7K100 | Hard Drive Specifications - Page 187
    device will save its Attribute Values prior to going into a power saving mode and supports the S.M.A.R.T. ENABLE/DISABLE ATTRIBUTE AUTOSAVE command. Bit Definition 0 Pre-power mode attribute saving of the first 511 bytes in the data structure. Travelstar 7K100 Hard Disk Drive Specification 173
  • Hitachi 7K100 | Hard Drive Specifications - Page 188
    Read Attribute Thresholds. All multibyte fields shown in these data structures follow the ATA/ATAPI-6 specification for byte ordering, that is, that the least significant byte occupies the 1 10 12 Offset 00h 01h Format binary binary 02h binary Travelstar 7K100 Hard Disk Drive Specification 174
  • Hitachi 7K100 | Hard Drive Specifications - Page 189
    13.39.3.3 Attribute ID Numbers Attribute ID Numbers supported by the device are the same as Attribute Values Data Structures. 13.39.3.4 Attribute Threshold of the result of a simple 8-bit addition of the first 511 bytes in the data structure. Travelstar 7K100 Hard Disk Drive Specification 175
  • Hitachi 7K100 | Hard Drive Specifications - Page 190
    log sector. All multibyte fields shown in these data structures follow the ATA/ATAPI-6 specifications for byte ordering. Table 120: S.M.A.R.T. error log sector Description S.M.A.R.T. error total number of errors. The value will not roll over. Travelstar 7K100 Hard Disk Drive Specification 176
  • Hitachi 7K100 | Hard Drive Specifications - Page 191
    LBA High register Device register Command register Time stamp (milliseconds from Power On) Byte 1 1 1 1 1 1 1 1 4 12 Offset 00h 01h 02h 03h 04h 05h 06h 07h 08h Travelstar 7K100 Hard Disk Drive Specification 177
  • Hitachi 7K100 | Hard Drive Specifications - Page 192
    1 LBA High register 1 Device register 1 Status register 1 Extended error data (vendor specific) 19 State 1 Life time stamp (hours) 2 30 Offset 00h 01h 02h 03h Self-test Reserved Vendor specific Note: The value of x is vendor specific Travelstar 7K100 Hard Disk Drive Specification 178
  • Hitachi 7K100 | Hard Drive Specifications - Page 193
    All multibyte fields shown in these data structures follow the ATA/ATAPI-6 specifications for byte ordering. Table 124: Self-test log data 8 Offset 00h 02h 0Ah 12A 1Ah 22h 2Ah 32h 3Ah 42h Read/Write R/W R/W R/W R/W R/W R/W R/W R/W R/W R/W Travelstar 7K100 Hard Disk Drive Specification 179
  • Hitachi 7K100 | Hard Drive Specifications - Page 194
    the device with a subcommand value in the Features Register that is either invalid or not supported by this device. A S.M.A.R.T. FUNCTION SET command subcommand other than S.M.A.R.T. ENABLE OPERATIONS was Register 04h 04h 04h 10h or 40h 10h or 01h Travelstar 7K100 Hard Disk Drive Specification 180
  • Hitachi 7K100 | Hard Drive Specifications - Page 195
    with no device access from the host. The time-out interval will be reinitialized if there is a device access before the time-out interval expires. Travelstar 7K100 Hard Disk Drive Specification 181
  • Hitachi 7K100 | Hard Drive Specifications - Page 196
    be a delay while waiting for the spindle to reach operating speed. The Standby Immediate command will not affect the auto power down time-out parameter. Travelstar 7K100 Hard Disk Drive Specification 182
  • Hitachi 7K100 | Hard Drive Specifications - Page 197
    Read Buffer and Write Buffer commands are synchronized such that sequential Write Buffer and Read Buffer commands access the same 512 byte within the buffer. Travelstar 7K100 Hard Disk Drive Specification 183
  • Hitachi 7K100 | Hard Drive Specifications - Page 198
    from the device Sector Count This indicates the number of requested sectors not transferred. The Sector Count will be zero unless an unrecoverable error occurs. Travelstar 7K100 Hard Disk Drive Specification 184
  • Hitachi 7K100 | Hard Drive Specifications - Page 199
    bits 16-23 (High). (L = 1) This indicates the head number of the last transferred sector. (L = 0) LBA mode this register contains the current LBA bits 24-27. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 185
  • Hitachi 7K100 | Hard Drive Specifications - Page 200
    sectors will be transferred. LBA Low Current LBA (7-0) LBA Low Previous LBA (31-24) LBA Mid Current LBA (15-8) LBA Mid Previous LBA (39-32) Travelstar 7K100 Hard Disk Drive Specification 186
  • Hitachi 7K100 | Hard Drive Specifications - Page 201
    =0) LBA (23-16) of the address of the first unrecoverable error LBA High(HOB=1) LBA (47-40) of the address of the first unrecoverable error Travelstar 7K100 Hard Disk Drive Specification 187
  • Hitachi 7K100 | Hard Drive Specifications - Page 202
    supported or enabled, or if the values in the Sector Count, Sector Number or Cylinder Low registers are invalid, the device shall return command aborted. If the host attempts to write to a read only log address, the device shall return command aborted. Travelstar 7K100 Hard Disk Drive Specification
  • Hitachi 7K100 | Hard Drive Specifications - Page 203
    not transferred. LBA Low This indicates the sector number of the sector to be transferred. (L = 0) In LBA mode this register contains the current LBA bits 0-7. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 189
  • Hitachi 7K100 | Hard Drive Specifications - Page 204
    In LBA mode this register contains current the LBA bits 24-27. (L = 1) The drive internally uses 40 bytes of ECC on all data read or writes. The 4-byte mode of the drive. Unexpected results may occur if such testing is performed using 4-byte mode. Travelstar 7K100 Hard Disk Drive Specification 190
  • Hitachi 7K100 | Hard Drive Specifications - Page 205
    16-23 (High). (L = 1) This indicates the head number of the last transferred sector. (L = 0) In LBA mode this register contains current the LBA bits 24-27. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 191
  • Hitachi 7K100 | Hard Drive Specifications - Page 206
    (31-24) LBA Mid Current LBA (15-8) LBA Mid Previous LBA (39-32) LBA High Current LBA (23-16) LBA High Previous LBA (47-40) Travelstar 7K100 Hard Disk Drive Specification 192
  • Hitachi 7K100 | Hard Drive Specifications - Page 207
    =0) LBA (23-16) of the address of the first unrecoverable error LBA High(HOB=1) LBA (47-40) of the address of the first unrecoverable error Travelstar 7K100 Hard Disk Drive Specification 193
  • Hitachi 7K100 | Hard Drive Specifications - Page 208
    unrecoverable error occurs. LBA Low This indicates the sector number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 0-7. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 194
  • Hitachi 7K100 | Hard Drive Specifications - Page 209
    16-23 (High). (L = 1) This indicates the head number of the last transferred sector. (L = 0) In LBA mode this register contains the current LBA bits 24-27. (L = 1) Travelstar 7K100 Hard Disk Drive Specification 195
  • Hitachi 7K100 | Hard Drive Specifications - Page 210
    (31-24) LBA Mid Current LBA (15-8) LBA Mid Previous LBA (39-32) LBA High Current LBA (23-16) LBA High Previous LBA (47-40) Travelstar 7K100 Hard Disk Drive Specification 196
  • Hitachi 7K100 | Hard Drive Specifications - Page 211
    specific) In the implementation of the drive the Write Verify command is exactly the same as the Write Sectors command (30h). Read verification is not performed after the write operation. Refer to 13.49, "Write Sectors (30h/ 31h)" on page 194. Travelstar 7K100 Hard Disk Drive Specification 197
  • Hitachi 7K100 | Hard Drive Specifications - Page 212
    Travelstar 7K100 Hard Disk Drive Specification 198
  • Hitachi 7K100 | Hard Drive Specifications - Page 213
    ter RST=0 After RST=1 and RDY=1 Hard Reset Device Busy After Hard Bus RESET Signal Reset Asserted Status Register BSY=1 Device Ready After Hard Reset Bus RESET Signal Asserted Status Register host system time-out would occur for the device. Travelstar 7K100 Hard Disk Drive Specification 197
  • Hitachi 7K100 | Hard Drive Specifications - Page 214
    2. For FORMAT UNIT command, the execution time is referred to 13.7, "Format Unit (F7h: vendor specific)" on page 105. Note 3. When the initial power mode at power on is Standby mode and Erase Unit • Security Set Password • Security Unlock. . Travelstar 7K100 Hard Disk Drive Specification 198
  • Hitachi 7K100 | Hard Drive Specifications - Page 215
    SERVICE S.M.A.R.T. FUNCTION SET CFA ERASE SECTORS READ MULTIPLE WRITE MULTIPLE SET MULTIPLE MODE READ DMA QUEUED Implementation for ATA-6 Category Travelstar 7K100 Type No Optional Yes Mandatory Yes Mandatory Yes Mandatory No Optional Travelstar 7K100 Hard Disk Drive Specification 199
  • Hitachi 7K100 | Hard Drive Specifications - Page 216
    specific Reserved: all remaining codes Implementation for ATA-6 Category Travelstar 7K100 specific. The operation is the same as WRITE SECTORS and verification is not performed. Note 3. Protected Area Feature Set Note 4. Power Management Feature Set Travelstar 7K100 Hard Disk Drive Specification
  • Hitachi 7K100 | Hard Drive Specifications - Page 217
    Support Coverage The following table provides a list of Feature Registers, Feature Names, and implementation for the Travelstar 7K100. The third column indicates whether or not the Travelstar 7K100 Disable SERVICE interrupt No Reserved Reserved Travelstar 7K100 Hard Disk Drive Specification 201
  • Hitachi 7K100 | Hard Drive Specifications - Page 218
    15.3 Changes from the Travelstar 5K100 The changes between the Travelstar 7K100 and the Travelstar 5K100 are listed below: • Product ID • Time to format Travelstar 7K100 Hard Disk Drive Specification 202
  • Hitachi 7K100 | Hard Drive Specifications - Page 219
    CE mark ...33 Check Power Mode ...97 Command descriptions 93 Command overhead ...13 Command protocol ...87 Command table ...78 Commands Support Coverage 199 Conductive noise ...23 Control electronics ...9 Corrosion test ...22 CSA approval ...34 C-TICK mark ...33 Cylinder allocation ...12 Cylinders
  • Hitachi 7K100 | Hard Drive Specifications - Page 220
    Discrete tone penalty ...32 Drive Address Register 61 Drive address setting ...51 Drive characteristics ...11 Drive handling precautions 3 Drive ready time ...15 E Electrical interface specification 35 Electromagnetic compatibility 33 Emergency unload ...26 Environment ...21 Execute Device
  • Hitachi 7K100 | Hard Drive Specifications - Page 221
    Load/unload ...26 M Magnetic fields ...23 Mechanical positioning 14 Mechanical specifications 28 Mode transition time ...16 Mounting hole locations 28 Mounting orientation ...29 N Non-data commands ...89 O Operating modes description ...16 P Packaging ...34 Performance characteristics 13
  • Hitachi 7K100 | Hard Drive Specifications - Page 222
    average ...14 full stroke ...14 single track ...15 Sense Condition ...153 Service life ...25 Set Features ...154 Set Max ADDRESS ...156 Set Max ...36 Signal descriptions ...37 Sleep ...161 Sound power levels ...32 Specification ...21 Standby ...180 Standby timer ...71 Status ...71 Status Register
  • Hitachi 7K100 | Hard Drive Specifications - Page 223
    Transition time ...72 U UL approval ...34 V Vibration ...30 W Write Buffer ...182 Write Cache function ...83 Z Zone ...12
  • Hitachi 7K100 | Hard Drive Specifications - Page 224
  • Hitachi 7K100 | Hard Drive Specifications - Page 225
    Produced in the United States 07/06 All rights reserved Travelstar™ is a trademark of Hitachi Global Storage Technologies. Microsoft, Windows XP, and Windows this publication to Hitachi Global Storage Technologies products, programs or services do not imply that Hitachi Global Storage Technologies
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
Hard Disk Drive Specification
Hitachi Travelstar 7K100
2.5 inch ATA/IDE hard disk drive
Model:
HTS721010G9AT00
HTS721080G9AT00
HTS721060G9AT00
Revision 1.3
13 July 2006