Hitachi 7K200 Quick Installation Guide
Hitachi 7K200 - Travelstar - Hard Drive Manual
 |
UPC - 683728198695
View all Hitachi 7K200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Hitachi 7K200 manual content summary:
- Hitachi 7K200 | Quick Installation Guide - Page 1
Quick Installation Guide Hitachi Travelstar 7K200 Models: HTS722020K9A300 HTS722020K9SA00 HTS722016K9A300 HTS722016K9SA00 HTS722012K9A300 HTS722012K9SA00 HTS722010K9A300 HTS722010K9SA00 HTS722080K9A300 HTS722080K9SA00 Handling precautions Set the drive down gently to prevent damage from impact or - Hitachi 7K200 | Quick Installation Guide - Page 2
• The temperature of the center of the hard drive cover should remain less than 65°C at all times. • The inertia of the chassis around the Z-axis of the gravity center of the device must be more than 3 x 10-4kg m2. • In case of general Sub-notebook PC weight (1.7kg), the inertia of the - Hitachi 7K200 | Quick Installation Guide - Page 3
Hitachi Global Storage Technologies Interface connector Mounting Solution Company: E-A-R Page 3 version 1.0 - Hitachi 7K200 | Quick Installation Guide - Page 4
, programs or services do not imply that Hitachi Global Storage Technologies intends to make these available in all countries in which Hitachi Global Storage Technologies operates. Product information is provided for information purposes only and does not constitute a warranty. Information is
-
1 -
2 -
3 -
4
 |
 |
Page 1
version 1.0
Quick Installation Guide
Hitachi Travelstar 7K200
Models:
HTS722020K9A300
HTS722020K9SA00
HTS722016K9A300
HTS722016K9SA00
HTS722012K9A300
HTS722012K9SA00
HTS722010K9A300
HTS722010K9SA00
HTS722080K9A300
HTS722080K9SA00
Handling precautions
y
Set the drive down gently to prevent damage from impact or vibration.
y
Handle the drive carefully by the edges. Do not touch the exposed printed circuit board or any electronic components.
y
Do not press on the top or bottom of the drive.
y
Before handling the drive, discharge any static electricity from yourself and your clothing. With one hand touch an
unpainted metal surface, then touch the ESD bag with the other hand. Remain in contact with the chassis and the bag for a
minimum of two seconds.
y
Vibration, shock and static electricity to the drive will damage the precision parts. In particular, prevent vibration or shock
generated by dropping, knocking over or hitting the drive. Also, avoid touching the electrical components directly, which
can discharge electrostatic energy and damage the drive.