Hitachi BZ-1 User Manual

Hitachi BZ-1 Manual

Get Hitachi BZ-1 PDF manuals and user guides View all Hitachi BZ-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi BZ-1 manual content summary:

  • Hitachi BZ-1 | User Manual - Page 1
    Projector BZ-1 User's Manual (detailed) Operating Guide (Type nos. BZ-1, BZ-1M) Thank you for purchasing this projector. WARNING ►Before using this product, please read all manuals for this product. Be sure to read "Safety Guide of the Video Electronics Standard of Hitachi Solutions, Ltd. in
  • Hitachi BZ-1 | User Manual - Page 2
    . . . 18 Auto power off, Usb type b, Lamp time, Interactive pen 19 Filter time, My button, My source, Power on/off 20 Service Operating 22 NETWORK menu 67 Adjusting the volume 22 Temporarily muting the sound. . . . . . 22 Selecting an input signal 22 Setup, Projector name, My image, Amx
  • Hitachi BZ-1 | User Manual - Page 3
    projector can be controlled and monitored via LAN connection. ü T his projector's network supports the PJLinkTM standard. ü The Interactive Pen included with the projector of package section in the User's Manual (concise) which is a book. Your projector should come with the items shown there
  • Hitachi BZ-1 | User Manual - Page 4
    into the projection lens or mirror while the projection lamp lights, since the projection lamp ray may cause a trouble on your eyes. ►Do not use the security bar and slot to prevent the projector from falling down, since it is not designed for it. CAUTION ►Maintain normal ventilation to prevent the
  • Hitachi BZ-1 | User Manual - Page 5
    projector work only as the cursor buttons while the template is displayed (&54). Ports (&9 ~ 13) (1) USB TYPE A port (2) LAN port (3) HDMI port (4) USB TYPE port (13) CONTROL port (14) VIDEO port (15) S-VIDEO port USB TYPE A DC5V 0.5A LAN (2) (1) (4) (3) USB TYPE B HDMI (11) COMPUTER IN2 (10
  • Hitachi BZ-1 | User Manual - Page 6
    ) (17) (20) (21) (24) (26) (28) MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY PAGE VOLUME ON FREEZE UP ＋ OFF 18) (23) (22) (25) (27) (29) (30) Back of the remote control Interactive pen (1) Pen tip (&19) (2) SIDE BUTTON No.0 button (&85) (3) SIDE BUTTON No.1
  • Hitachi BZ-1 | User Manual - Page 7
    dealer or service personnel. • The projected image position and/or focus may change during warm-up (approx. 30 minutes after the lamp is turned on) or when the ambient conditions change. Readjust the image position and/or focus as necessary. • Since the projector features an ultra short throw, be
  • Hitachi BZ-1 | User Manual - Page 8
    , and leave installing and removing the projector with the mounting accessories to the service personnel. • Read and keep the user's manual of the mounting accessories used. CAUTION ►Avoid placing the projector in smoky, humid or dusty place. Placing the projector in such places could cause fire
  • Hitachi BZ-1 | User Manual - Page 9
    After making sure that the device and projector are turned off, connect them following the instructions below. WARNING ►Use only the projector while connected to a device in operation, unless that is directed in the manual of the device. Otherwise it may cause malfunction in the device or projector
  • Hitachi BZ-1 | User Manual - Page 10
    . - Please use the standard drivers in your computer as this projector is a Plug-andPlay monitor. • When AUTO is selected for the COMPUTER IN1 or COMPUTER IN2 port in COMPUTER IN of the INPUT menu, that port will accept component video signals (43). • When the USB TYPE B port and the computer
  • Hitachi BZ-1 | User Manual - Page 11
    supported by this projector. - Although the projector can display signals with resolution up to UXGA (1600X1200), the signal will be converted to the projector display resolution. • To use the Interactive Function, it is necessary to install the "StarBoard Software" in the DVD-ROM on the computer. (
  • Hitachi BZ-1 | User Manual - Page 12
    RGB IN RL USB storage device USB TYPE A DC5V 0.5A LAN USB TYPE B HDMI CONTROL MONITOR OUT COMPUTER IN2 COMPUTER IN1 MIC AUDIO IN1 AUDIO IN3 AUDIO OUT S-VIDEO R R L AUDIO IN2 L VIDEO CAUTION ►Before removing the USB storage device from the port of the projector, be sure to use the REMOVE
  • Hitachi BZ-1 | User Manual - Page 13
    - Network Guide for details of the network functions. Access point Computer LAN RS-232C USB TYPE A DC5V 0.5A LAN USB TYPE B HDMI COMPUTER IN2 COMPUTER IN1 CONTROL MONITOR OUT MIC AUDIO IN1 AUDIO IN3 AUDIO OUT S-VIDEO R R L AUDIO IN2 L VIDEO CAUTION ►Before connecting the projector to
  • Hitachi BZ-1 | User Manual - Page 14
    that when the DIRECT POWER ON function activated (&56), the connection of the power supply make the projector turn on. 3. Make sure that the cover is not attached to the pen sensor when the interactive pen is used. AC IN Power cord PEN sensor WARNING ►Please use extra caution when connecting the
  • Hitachi BZ-1 | User Manual - Page 15
    chain or wire up to 10 mm in diameter can be attached to the security bar on the projector. Also this product has the security slot for the Kensington lock. For details, see the manual of the security tool. Anti-theft chain or wire Setting up Security slot Security bar WARNING ►Do
  • Hitachi BZ-1 | User Manual - Page 16
    up Utilize the cable cover as the guard and blind for the connecting parts. 1. Connect the signal cables and the power cord to the projector first. 2. Combine parts as shown in figure, and assemble the cable cover. 3 3 1 1 2 2 3. Insert the three knobs on the cable cover into the three holes
  • Hitachi BZ-1 | User Manual - Page 17
    insert the two AA batteries (HITACHI MAXELL or HITACHI MAXELL ENERGY, Part No.LR6 or not use batteries of different types at the same time. Do not from children and pets. • Do not recharge, short circuit, solder or disassemble a battery. • Do to send signals to the projector (Class 1 LED), so be
  • Hitachi BZ-1 | User Manual - Page 18
    in the SERVICE item of the OPTION menu (63) of the projector to be VIDEO COMPUTER DOC.CAMERA (4) Move pointer: Use the cursor buttons and ►. USB TYPE sure to check your computer's manuals before connecting this product to the computer's configurations and mouse drivers. This function can work with
  • Hitachi BZ-1 | User Manual - Page 19
    Interactive pen Interactive pen Installing the battery 8 1. Turn the battery cover of the pen to the left to open it. 2. As illustrated in the diagram, insert the AAA battery into the battery cover with the - end facing the front. (HITACHI MAXELL or HITACHI Do not recharge, short circuit, solder or
  • Hitachi BZ-1 | User Manual - Page 20
    button POWER indicator VIDEO MY SOURCE/ MY SOURCE/ VIDEO COMPUTER DOC.CAMERA trouble on your eyes. ►Be careful not to pinch your finger with the lens door, to prevent an injury. ►Do not place the projector ►Do not stand under the projector mounted on the wall or ceiling, when its lens door is
  • Hitachi BZ-1 | User Manual - Page 21
    down such as in ceiling mount installation. Then POWER indicator will stop blinking and light in steady orange when the lamp cooling is complete (111). Do not turn the projector on for about 10 minutes or more after turning it off. Also, do not turn the projector off shortly after turning it on
  • Hitachi BZ-1 | User Manual - Page 22
    input port from the current port as below. INPUT button COMPUTER IN1  COMPUTER IN2 VIDEO LAN S-VIDEO HDMI  USB TYPE A USB TYPE B ● W hile ON is selected for AUTO SEARCH item in OPTION menu (56), the projector will keep checking the ports in above order repeatedly till an input signal is
  • Hitachi BZ-1 | User Manual - Page 23
    port sequentially till an input signal is detected (56). If VIDEO button is pressed when COMPUTER IN1, COMPUTER IN2, LAN, USB TYPE A or USB TYPE B port is selected, the projector will check HDMI port first. VIDEO button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY PAGE
  • Hitachi BZ-1 | User Manual - Page 24
    KEYSTONE MY BUTTON 1 2 MUTE - FOCUS + POSITION - D-ZOOM + MENU S-VIDEO HDMI  USB TYPE A USB TYPE B ENTER ESC RESET ● While ON is selected for AUTO SEARCH item in OPTION menu (56), the projector will keep checking the ports in above order repeatedly till an input signal is detected
  • Hitachi BZ-1 | User Manual - Page 25
    projector is in a condition to be able to just project. If necessary, detach the spacer, and the elevator feet can be manually twisted the image, use the magnify function (28). D-ZOOM - button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY PAGE VOLUME ON FREEZE UP ＋
  • Hitachi BZ-1 | User Manual - Page 26
    (54). ● FOCUS +/- button on the projector is invalid when the USB TYPE A port is selected as the input source. FOCUS - button MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY DISABLE is selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (61). 26
  • Hitachi BZ-1 | User Manual - Page 27
    screen, to display the D-SHIFT (45) dialog on screen. MY SOURCE/ VIDEO COMPUTER DOC.CAMERA ASPECT AUTO SEARCH BLANK MAGNIFY PAGE VOLUME ON FREEZE UP VIDEO COMPUTER DOC.CAMERA to aid you in correcting the distortion. ASPECT AUTO SEARCH BLANK 2. Use the ▲/▼ cursor buttons to select MANUAL
  • Hitachi BZ-1 | User Manual - Page 28
    for the first time after the projector is turned on, the MY SOURCE/ VIDEO COMPUTER DOC.CAMERA picture will be TYPE B port 1.5 times  2 times  3 times  4 times  1 time ENTER ESC RESET  F or video signals, s-video signals, component video supported is input. - There is no input signal. 28
  • Hitachi BZ-1 | User Manual - Page 29
    If the projector continues projecting a still image for a long time, theESC LCD RESET panel might possibly be burned in. Do not leave the projector in the input signal. Please refer to BLANK item in SCREEN menu MY SOURCE/ VIDEO COMPUTER DOC.CAMERA (50). ASPECT AUTO SEARCH BLANK To exit from the
  • Hitachi BZ-1 | User Manual - Page 30
    function This projector has the following menus: INTERACTIVE, PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK, SECURITY and EASY MENU. MY SOURCE/ VIDEO COMPUTER DOC item will appear. (3) Use the buttons as instructed in the OSD to operate the item. (continued on next page) 30
  • Hitachi BZ-1 | User Manual - Page 31
    Operating Using the menu function (continued) 3. To close the MENU, press the MENU button again or select EXIT and press the ◄ cursor button or ENTER button. Even if you do not do anything, the dialog will automatically disappear after about 30 seconds. ● If you want to move the menu position, use
  • Hitachi BZ-1 | User Manual - Page 32
    it according to the following table. Item INTERACTIVE ASPECT D-ZOOM KEYSTONE KEYSTONE PERFECT FIT Description Executing this item starts (or cancels) calibration of the position of the pen. For more details, refer to the manual for the "StarBoard Software" in the bundled DVD-ROM (80). Using
  • Hitachi BZ-1 | User Manual - Page 33
    the ◄/► buttons changes the display language. See the LANGUAGE item in SCREEN menu (50). Press the ► or ENTER button to use the menu of INTERACTIVE, ADVANCED MENU PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION, NETWORK or SECURITY. EXIT Press the ◄ or ENTER button to finish the OSD menu
  • Hitachi BZ-1 | User Manual - Page 34
    INTERACTIVE menu INTERACTIVE menu Item INTERACTIVE Description Executing this item starts (or cancels) calibration of the position of the pen. For more details, refer to the manual for the "StarBoard Software" in the bundled DVD-ROM (80). 34
  • Hitachi BZ-1 | User Manual - Page 35
    PICTURE menu From the PICTURE menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. PICTURE menu Item BRIGHTNESS CONTRAST Description
  • Hitachi BZ-1 | User Manual - Page 36
    be selected if either (1) or (2) applies. (1) HDMI FORMAT item in the INPUT menu is set to VIDEO. (2) HDMI FORMAT item in the INPUT menu is set to AUTO, and the projector recognizes that it receives video signals. TINT Using the ◄/► buttons adjusts the tint. Reddish ó Greenish • This item can be
  • Hitachi BZ-1 | User Manual - Page 37
    The active iris is always open. • The screen may flicker when the PRESENTATION or THEATER modes are selected. If this occurs select OFF. This projector has 4 memories for adjustment data (for all the items of the PICTURE menu). Selecting a function using the ▲/▼ buttons and pressing the ► or ENTER
  • Hitachi BZ-1 | User Manual - Page 38
    ASPECT For an HDMITM signal NORMAL ó 4:3 ó 16:9 ó 16:10 ó 14:9 ó NATIVE For a video signal, s-video signal or component video signal 4:3 ó 16:9 ó 16:10 ó 14:9 ó NATIVE OVER SCAN For an input signal from the LAN, USB TYPE A or USB TYPE B port, or if there is no signal 16:10 (fixed) • The NORMAL
  • Hitachi BZ-1 | User Manual - Page 39
    signal or an s-video signal, the range of this adjustment depends on OVER SCAN (38) setting. It is not possible to adjust when OVER SCAN is set to 10. • This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B or HDMI port. Using the ◄/► buttons adjusts the horizontal position
  • Hitachi BZ-1 | User Manual - Page 40
    item can be selected only for a computer signal or a component video signal. This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B or HDMI port. Using the ◄/► buttons adjusts the horizontal selected for the AUTO ADJUST item of the SERVICE item in the OPTION menu (61). 40
  • Hitachi BZ-1 | User Manual - Page 41
    REC709 ó REC601 COLOR SPACE • This item can be selected only for a computer signal (except for signals from the LAN, USB TYPE A and USB TYPE B ports) or a component video signal. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well at some signals. In such
  • Hitachi BZ-1 | User Manual - Page 42
    . AUTO ó NTSC ó PAL ó SECAM N-PAL ó M-PAL ó NTSC4.43 • This item is performed only for a video signal from the VIDEO port or the S-VIDEO port. • The AUTO mode automatically selects the optimum mode. • The AUTO operation may not work well for some signals. If the picture becomes unstable (e.g. an
  • Hitachi BZ-1 | User Manual - Page 43
    to select the COMPUTER IN port to be set. (2) U se the ◄/► buttons to select the computer input signal type. AUTO ó SYNC ON G OFF • Selecting the AUTO mode allows you to input a sync on G signal or component video signal from the port. Please refer to "Technical" for the connection of component
  • Hitachi BZ-1 | User Manual - Page 44
    COMPUTER IN1 and COMPUTER IN2 input signals can be set on this projector. (1) In the INPUT menu select the RESOLUTION using the ▲/▼ and vertical (VERT) resolutions using CUSTOM ↓ the buttons. This function may not support all resolutions. (5) Move the cursor to OK on screen and press the
  • Hitachi BZ-1 | User Manual - Page 45
    SETUP menu From the SETUP menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. SETUP menu Item D-ZOOM D-SHIFT PICT. POSIT. H KEYSTONE
  • Hitachi BZ-1 | User Manual - Page 46
    of correction is increased using the PERFECT FIT function, the Interactive Function may not function properly particularly if the side correction amount ECO MODE. ON ó OFF AUTO ECO MODE • When ON is selected, the projector will always be set to Eco mode at start-up regardless of the ECO MODE
  • Hitachi BZ-1 | User Manual - Page 47
    as below: • When SAVING is selected, the RS-232C communication control except to turn the projector on and the network function are disabled while the projector is in the standby mode. If the COMMUNICATION TYPE in the COMMUNICATION menu is set to NETWORK BRIDGE, all of the RS-232C commands are
  • Hitachi BZ-1 | User Manual - Page 48
    (2) is output to both the AUDIO OUT port and built-in speaker of this projector. However, the built-in speaker does not work when SPEAKER is set to OFF. received. This function is available only when the signal is NTSC for VIDEO or S-VIDEO, or 480i@60 for COMPUTER IN1 or COMPUTER IN2, and when AUTO
  • Hitachi BZ-1 | User Manual - Page 49
    AUDIO menu Item HDMI AUDIO MIC LEVEL MIC VOLUME Description Using the ▲/▼ buttons switches the mode for the HDMITM audio. Check each of the two modes provided and select the suitable one for your HDMITM audio device. 1 ó 2 Using the ▲/▼ buttons switches the input level to match that of the
  • Hitachi BZ-1 | User Manual - Page 50
    SCREEN menu SCREEN menu From the SCREEN menu, items shown in the table below can be performed. Select an item using the ▲/▼ cursor buttons, and press the ► cursor button or ENTER button to execute the item. Then perform it according to the following table. Item LANGUAGE MENU POSITION BLANK
  • Hitachi BZ-1 | User Manual - Page 51
    selected when the ON is selected to the MyScreen PASSWORD item in SECURITY menu (75). • This function is unavailable for a signal from the LAN, USB TYPE A, USB TYPE B or HDMI port. (continued on next page) 51
  • Hitachi BZ-1 | User Manual - Page 52
    SCREEN menu Item MyScreen Lock MESSAGE Description Using the ▲/▼ buttons turns on/off the MyScreen lock function. ON ó OFF When the ON is selected, the item MyScreen is locked. Use this function for protecting the current MyScreen. • This function cannot be selected when the ON is selected to the
  • Hitachi BZ-1 | User Manual - Page 53
    SCREEN menu Item SOURCE NAME Description Each input port for this projector can have a name applied to it. (1) Use the ▲/▼ buttons on the SCREEN menu to select SOURCE NAME and press the ► or ENTER button. The SOURCE
  • Hitachi BZ-1 | User Manual - Page 54
    SCREEN menu Item SOURCE NAME (Continued) TEMPLATE Description (6) The current name will be displayed on the first line. Use the buttons and the ENTER or INPUT button to select and enter characters. To erase 1 character at one time, press the RESET button or press the ◄ and INPUT button at the
  • Hitachi BZ-1 | User Manual - Page 55
    sounds. It is required to have NTSC format video or 480i@60 format component video source supporting C.C. feature to utilize this function. It may not which is for additional information such as news reports or a TV program guide. The information covers the entire screen. Not all of the C.C. program
  • Hitachi BZ-1 | User Manual - Page 56
    the following order. The search is started from the current port. Then when an input is found, the projector will stop searching and display the image. COMPUTER IN1  COMPUTER IN2  LAN  USB TYPE A VIDEO ï S-VIDEO ï HDMIï USB TYPE B • It may take several seconds to project the images from the USB
  • Hitachi BZ-1 | User Manual - Page 57
    turn the projector off. Long (max. 99 minutes) ó Short (min. 0 minute = DISABLE) AUTO POWER OFF When the time is set to 0, the projector is not turned USB DISPLAY in the dialog to project the picture input to the USB TYPE B port. In this case, you cannot use the simple mouse and keyboard
  • Hitachi BZ-1 | User Manual - Page 58
    , counted after the last resetting. It is shown in the OPTION menu. Pressing the RESET button on the remote control or the ► button of the projector displays a dialog. To reset the filter time, select the OK using the ► button. CANCEL  OK • Please reset the filter time only when you have cleaned
  • Hitachi BZ-1 | User Manual - Page 59
    the input from VIDEO port. • SLIDESHOW: Selects the input from USB TYPE A port, and starts a Slideshow. • MY IMAGE: Displays the MY IMAGE menu (70). • MESSENGER: Turns the messenger text displayed on the screen on/off (Messenger Function in the User's Manual - Network Guide). When there is
  • Hitachi BZ-1 | User Manual - Page 60
    the remote control. You can use this function not only for document cameras but also computers and other equipment. COMPUTER IN1  COMPUTER IN2  LAN  USB TYPE A VIDEO  S-VIDEO  HDMI  USB TYPE B (continued on next page) 60
  • Hitachi BZ-1 | User Manual - Page 61
    Selecting this item displays the SERVICE menu. Select an item using the ▲/▼ buttons, and press the ► button or the ENTER button on the remote control to execute the item. OPTION menu FAN SPEED Using the ▲/▼ buttons switches the rotation speed of the cooling fans. If the projector is used at an
  • Hitachi BZ-1 | User Manual - Page 62
    OPTION menu Item SERVICE (continued) Description KEY LOCK (1) Use the ▲/▼ buttons to select CONTROL PANEL or REMOTE CONTROL. (2) Use the ◄/► buttons to turn the key lock function on/off. When ON is selected, all buttons on the projector or remote control except the STANDBY/ON button are locked. •
  • Hitachi BZ-1 | User Manual - Page 63
    SERVICE (continued) OPTION menu Description REMOTE FREQ. (1)Use the ▲/▼ button to change the projector's remote sensor frequency setting (4, 18). 1:NORMAL ó 2:HIGH (2)Use the ◄/► button to change the projector of the projector using the described above. • When COMMUNICATION TYPE (64) is set to
  • Hitachi BZ-1 | User Manual - Page 64
    ó OFF NETWORK BRIDGE: Select this type, if it is required to control an external device as a network terminal, via this projector from the computer. The CONTROL port doesn't accept RS-232C commands (Network Bridge Function in the User's Manual - Network Guide) OFF: Select this mode to receive
  • Hitachi BZ-1 | User Manual - Page 65
    through the CONTROL port. OFF ó 1s ó 2s ó 3s SERVICE (continued) OFF: Select this mode if it is not required to check the responses from the device that the projector COMMUNICATION (continued) sends data to. In this mode, the projector can send out data from the computer continuously. 1s /2s
  • Hitachi BZ-1 | User Manual - Page 66
    OPTION menu Item Description INFORMATION Selecting this item displays a dialog titled "INPUT_INFORMATION". It shows the information about the current input. SERVICE (continued) • The "FRAME LOCK" message on the dialog means the frame lock function is working. • This item can't be selected for no
  • Hitachi BZ-1 | User Manual - Page 67
    NOTE • If you are not utilizing SNTP (Date/Time Settings in the User's Manual - Network Guide), then you must set the DATE AND TIME during the initial installation. • The network communication control is disabled while the projector is in standby mode if the STANDBY MODE item of SETUP menu is set
  • Hitachi BZ-1 | User Manual - Page 68
    set to OFF. • The IP ADDRESS is the number that identifies this projector on the network. You cannot have two devices with the same IP ADDRESS on Year (last two digits), Month, Date, Hour and Minute. • The projector will override this setting and retrieve DATE AND TIME information from the Time server
  • Hitachi BZ-1 | User Manual - Page 69
    ENTER or INPUT button, 1 character or all characters will be erased.The PROJECTOR NAME can be input up to 64 characters. (3) To change an already and press the ►, ENTER or INPUT button. To revert to the previous PROJECTOR NAME without saving changes, move the cursor to the CANCEL on screen and press
  • Hitachi BZ-1 | User Manual - Page 70
    , the application software PJImg/Projector Image Tool that can be downloaded from our website is required. Use the ▲/▼ buttons to select an item which is a still image by the MY IMAGE ( My Image Function in the User's manual - Network Guide) and the ► or ENTER button to display the image. • The
  • Hitachi BZ-1 | User Manual - Page 71
    a computer to the Presenter mode while its image is projected, the projector is occupied by the computer and access from any other computer is "LiveViewer". For details, see the section Presenter mode in the User's Manual - Network Guide. MULTI PC MODE If you set one or more computers to the Multi
  • Hitachi BZ-1 | User Manual - Page 72
    on how to switch the display mode to Multi PC mode on your computer, see the section Switching the display mode in the User's Manual - Network Guide. • The Presenter mode setting of the selected computer becomes valid when the display mode is changed to Single PC mode. Also, the Presenter mode
  • Hitachi BZ-1 | User Manual - Page 73
    network connection method in the User's manual - Network Guide. • Only the first 16 characters of the projector name are displayed. • When the initializes the network functions. Choose the RESTART EXECUTE using the button ►. SERVICE Then use the button ► to execute. Network will be once cut
  • Hitachi BZ-1 | User Manual - Page 74
    the RESET button on the remote control for about 3 seconds or press and hold the INPUT button for 3 seconds while pressing the ► button on the projector. (2). The 10 digit Inquiring Code will be displayed. Contact your dealer with the 10 digit Inquiring Code. Your password will be sent after your
  • Hitachi BZ-1 | User Manual - Page 75
    30 seconds, please make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to MyScreen PASSWORD on/off menu. When a password is set for MyScreen: • The MyScreen registration function (and menu) will be unavailable
  • Hitachi BZ-1 | User Manual - Page 76
    the Enter PIN code box is displayed. This function will activate only when the projector is started after AC power is turned off. • Please do not forget your LOCK function off. If an incorrect PIN code is input 3 times, the projector will turn off. 3 If you have forgotten your PIN code 3-1 While
  • Hitachi BZ-1 | User Manual - Page 77
    30 seconds, please make note of the password during this time. Pressing the ENTER button on the remote control or the ► button on the projector will return to the TRANSITION DETECTOR on/off menu. • Please do not forget your TRANSITION DETECTOR password. • This function will activate only when
  • Hitachi BZ-1 | User Manual - Page 78
    about 30 seconds, then please make note of the password during this time. Pressing the ENTER button on the remote control or ► button on the projector will return to the MY TEXT PASSWORD on/off menu. 2 Turning off the MY TEXT PASSWORD 2-1 Follow the procedure in 1-1 to display the MY TEXT
  • Hitachi BZ-1 | User Manual - Page 79
    When it is set ON, the MY TEXT will be displayed on the START UP screen and the INPUT_ INFORMATION when the INFORMATION on the SERVICE menu is chosen. • This function is available only when the MY TEXT PASSWORD function is set to the OFF. MY TEXT WRITING (1) U se the ▲/▼ buttons
  • Hitachi BZ-1 | User Manual - Page 80
    cable Computer cable 64#%SJWFS 4UBS#PBSE4PGUXBSF Interactive Function enables interactive operations, such as operation of the connected computer and writing on the screen using the "StarBoard Software", by making use of the built-in sensor of the projector and the supplied pen without the need
  • Hitachi BZ-1 | User Manual - Page 81
    Function (continued) Presentation tools When using the interactive function, the recommended computer specifications are shown below. Capture Device that supports Direct Show with a WDM device is required for playback and capturing on Web cam. NOTE • Do not place the projector near equipment
  • Hitachi BZ-1 | User Manual - Page 82
    any response even on the 60''-100'' sized screen. • Note that the interactive pen may not function properly if it is used near equipment that emits pest control unit, motion sensor, etc.) or it vibrates. • StarBoard Software may not activate, if DirectX® function of the computer is turned off
  • Hitachi BZ-1 | User Manual - Page 83
    may occur if the cables are not grounded. • The pen sensor may be blocked if the projector is placed directly on the floor. It is recommended the projector be mounted on the wall or ceiling. The Interactive Function does not work during rear projection. • It is also recommended to use an HDMI port
  • Hitachi BZ-1 | User Manual - Page 84
    use the Interactive Function, a cannot be loaded correctly on the computer, check whether the problem can be resolved by changing the way you hold the pen Otherwise, the pen may not function properly. NOTE • The projector detects the pen coordinates by reading infrared and ultrasound signals emitted
  • Hitachi BZ-1 | User Manual - Page 85
    Presentation tools Interactive Function (continued) Basic pen operation In the default setting, SIDE BUTTON No.0 SIDE BUTTON No1 You can use the "StarBoard Software" function to change the button settings. For more details, refer to the manual for the "StarBoard Software" in the bundled DVD-ROM. 85
  • Hitachi BZ-1 | User Manual - Page 86
    instructions in the manual located inside the bundled DVD-ROM. For details on how to use the "StarBoard Software" and its functions, refer to the bundled "StarBoard Software" DVD-ROM manual of Hitachi Interactive Projector and Starboard Software is in conformity with the Starboard FX Portable Series.
  • Hitachi BZ-1 | User Manual - Page 87
    card reader type) NOTE • USB readers (adapters) that have more than one USB slot may not work (if the adapter is acknowledged as multiple devices connected). • USB devices with security software may not work. • Be careful when inserting or removing a USB device. (12, 90) [Supported format] • FAT12
  • Hitachi BZ-1 | User Manual - Page 88
    some images in the Thumbnail mode. The Thumbnail mode will be started as the primary function of the PC-LESS Presentation after selecting the USB TYPE A port as the input source. Selected image Thumbnail images Thumbnail menu 88
  • Hitachi BZ-1 | User Manual - Page 89
    The following functions can be supported while the Thumbnail is displayed. The remote control PAGE UP PAGE DOWN Button operation The keypad on Web Remote in web the projector browser software. - PAGE UP PAGE DOWN ENTER INPUT ENTER Functions Move cursor Switches pages • Displays
  • Hitachi BZ-1 | User Manual - Page 90
    Slideshow. Selects the Slideshow mode. Switches the input port. Displays the menu. Be sure to use this function before removing USB storage device from the projector. After that, the projector will not recognize a USB storage device until you insert it again into the USB
  • Hitachi BZ-1 | User Manual - Page 91
    continued) Presentation tools NOTE • These operations are not accessible while the projector OSD is displayed. • The Thumbnail mode shows 20 pictures in the Thumbnail. This file seems to be broken or not supported format. A file that cannot be displayed on the thumbnail screen is indicated by a file
  • Hitachi BZ-1 | User Manual - Page 92
    on the Web Remote Control. Full screen display The following functions can be supported in the Full Screen mode. Button operation The remote control The keypad on the projector Web Remote in web browser software. ▼ ► or PAGE DOWN ▼ or ► ▼ ► or PAGE DOWN ▲ ◄ or PAGE UP ▲ or ◄ ▲ ◄ or PAGE
  • Hitachi BZ-1 | User Manual - Page 93
    is displayed. The remote control ENTER Button operation The keypad on the projector Web Remote in web browser software. INPUT ENTER Functions Displays thumbnail * These operations are not accessible while the projector OSD is displayed. NOTE • It is not possible to change the input
  • Hitachi BZ-1 | User Manual - Page 94
    Set the interval time of the Slideshow. It is not recommend to set the interval time very short something like several seconds, because it may take more than several seconds to read and display .txt" is the read only type file, it is impossible to change the settings of the Slideshow. 94
  • Hitachi BZ-1 | User Manual - Page 95
    Presentation tools PC-LESS Presentation (continued) Playlist The Playlist is a DOS format text file, which decides the order of displayed still image files in the Thumbnail or Slideshow. The playlist file name is "playlist.txt" and it can be edited on a computer. It is created in the folder that
  • Hitachi BZ-1 | User Manual - Page 96
    Display The projector can display images transferred from a computer via an USB cable (&10). Performance may suffer if the image displayed from the USB TYPE B Port is used while using Interactive Function. It is recommended to use COMPUTER IN or HDMI connection. Hardware and software requirement for
  • Hitachi BZ-1 | User Manual - Page 97
    to the User's Manual - Network Guide) and this application cannot be used at the same time. If you connect your computer to the projector by using a USB with following the user's manual. • Some security software may block image transmission. Please change the security software setting to allow the
  • Hitachi BZ-1 | User Manual - Page 98
    the button is clicked is remained on the screen. You can revise the image data on your computer without showing it on the projector's screen.  Option button The Options window is displayed.  Minimize button The Floating menu is closed, and the icon reappears in the Windows notification
  • Hitachi BZ-1 | User Manual - Page 99
    over Speed. It makes JPEG compression rate lower. The screen on the projector is rewritten slower because the transferred data is larger, but the image and the display speed may be faster. BZ-1, BZ-1M: 1280 x 800 If your computer does not support the display resolution specified above, a smaller
  • Hitachi BZ-1 | User Manual - Page 100
    LiveViewer application window on the screen, please check the box. NOTE • Please check this box when you use Starboard Software with BZ-1/ BZ-1M. The annotation layer may not display on the projector image when this option is OFF. About The version information of the "LiveViewer Lite for USB". 100
  • Hitachi BZ-1 | User Manual - Page 101
    with your dealer and tell the lamp type number. Type number : DT01251 lamp cover Replacing the lamp 1. Turn the projector off, and unplug the power cord. Allow the projector to cool for at least 45 minutes. 2. Prepare a new lamp. If the projector is mounted on a ceiling, or if the lamp has broken
  • Hitachi BZ-1 | User Manual - Page 102
    .org (in the US) or www.epsc.ca (in Canada). For more information, call your dealer. • If the not open the lamp cover while the projector is mounted on a wall or ceiling. This is dangerous, since if the problems elsewhere besides the lamp. If this happens, consult your local dealer or a service
  • Hitachi BZ-1 | User Manual - Page 103
    replace the lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. 1. Turn the projector off, and unplug the power cord. Allow the projector to sufficiently cool down. 3. 2. Use a vacuum cleaner on and around the filter
  • Hitachi BZ-1 | User Manual - Page 104
    or heavily soiled. • When you replace the projection lamp, please replace the air filter. An air filter of specified type will come together with a replacement lamp for this projector. • Please reset the filter time only when you have cleaned or replaced the air filter, for a suitable indication
  • Hitachi BZ-1 | User Manual - Page 105
    HITACHI MAXELL or HITACHI MAXELL ENERGY, part number CR2032 or CR2032H. 1. Turn the projector off, and unplug the power cord. Allow the projector by removing the battery. For setting the clock, see the User's Manual - Network Guide. WARNING ►Be careful of handling a battery, as a battery can
  • Hitachi BZ-1 | User Manual - Page 106
    is closed manually, it may not shut properly. • The lens door may not close when the LENS DOOR LOCK function of the SERVICE item SERVICE item in the OPTION menu (&62). WARNING ►Before caring for the projection mirror and lens, turn the projector off and unplug the power cord, then cool the projector
  • Hitachi BZ-1 | User Manual - Page 107
    function at all. Check the horns of the pen sensor, and remove any dust accumulated on them using a vacuum cleaner. PEN sensor 1. Turn the projector off, and unplug the power cord. Allow the projector to cool sufficiently. Make sure that the lens door is closed before cleaning. 2. Ensure that the
  • Hitachi BZ-1 | User Manual - Page 108
    . CAUTION ►Please take right care of the projector according to the following. Incorrect care could cause not only an injury but adverse influence such as discoloration, peeling paint, etc. ►Do not use cleaners or chemicals other than those specified in this manual. ►Do not polish or wipe with hard
  • Hitachi BZ-1 | User Manual - Page 109
    stopped, contact to your dealer or service company. Otherwise if a problem occurs with the projector, the following checks and measures are Manual - Network Guide) The horizontal or vertical frequency of the input signal is not within the specified range. Please confirm the specs for your projector
  • Hitachi BZ-1 | User Manual - Page 110
    the air filter dirty? • Does the peripheral temperature exceed 35°C? • Is the projector used at an altitude of about 1600 m or higher? If the projector is used at an altitude of about 1600 m or higher, set FAN SPEED of the SERVICE item in the OPTION menu to HIGH (61). A note of precaution when
  • Hitachi BZ-1 | User Manual - Page 111
    . If the same indication is displayed after the remedy, please contact your dealer or service company. Blinking In Red or Lighting In Red Turned off Blinking In Red The cooling fan is not operating. Please turn the power off, and allow the projector to cool down at least 20 minutes. After the
  • Hitachi BZ-1 | User Manual - Page 112
    Turned off At least 1 Power ON schedule is saved to the projector. Please refer to Schedule Settings section of User's Manual - Network Guide. NOTE • When the interior portion has become overheated, for safety purposes, the projector is automatically shut down, and the indicator lamps may also be
  • Hitachi BZ-1 | User Manual - Page 113
    Troubleshooting Resetting all settings When it is hard to correct some wrong settings, the FACTORY RESET function of SERVICE power plug from the power outlet, and allow the projector to cool down at least 10 minutes, then turn source device by referring to the manual of the source device. Neither
  • Hitachi BZ-1 | User Manual - Page 114
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects ( input to the port. Otherwise select other port for picture input. The projector does not recognize the USB storage device inserted into USB TYPE A port. Use the REMOVE USB function first, remove the USB storage
  • Hitachi BZ-1 | User Manual - Page 115
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect Video and/or CONTRAST settings to a higher level using the menu function. The projector is operating in Eco mode. Set ECO MODE to NORMAL, and set AUTO
  • Hitachi BZ-1 | User Manual - Page 116
    Troubleshooting Phenomena that may be easy to be mistaken for machine defects (continued) Phenomenon Cases not involving a machine defect The computer connected to the USB TYPE B port of the projector TYPE item function does in the OPTION - SERVICE Video Microsoft® Help and Support home page -
  • Hitachi BZ-1 | User Manual - Page 117
    interactive function, the projector can not be recognized. Is the use of USB cables disabled? Enable the use of USB cables. The "StarBoard Software relevant manuals such as that for the computer.) Is the power of the projector turned on? Check to ensure that the POWER indicator of the projector is
  • Hitachi BZ-1 | User Manual - Page 118
    Troubleshooting the "StarBoard Software" and reinstall it. Is the projector positioned too close fluorescent light. - Place surrounded by walls or ceiling made of materials that allow easy sound reflection, such example, the Interactive Function does not function if the projector is enclosed with
  • Hitachi BZ-1 | User Manual - Page 119
    Perform calibration of the pen position. For more details, refer to the manual for the "StarBoard Software" in the bundled DVD-ROM. - the pen cursor. Is the projector inclined? Install the projector correctly and horizontally before - performing calibration of the pen position. (continued on
  • Hitachi BZ-1 | User Manual - Page 120
    Troubleshooting the projector correctly installed? Check the installed position of the projector. Reference Software" files may be corrupted, or installation may not have completed successfully. 86 Uninstall the "StarBoard Software TYPE B in the OPTION menu set to USB DISPLAY? Change the setting
  • Hitachi BZ-1 | User Manual - Page 121
    system is ready to use. ・If you got the message dialog showing "Projector is not connected" after "Check Connection" command through the Starboard Software menu, and the interactive pen still does not work, turn the projector power off and try again from the beginning. Reference page 83 This may
  • Hitachi BZ-1 | User Manual - Page 122
    Specifications Specifications Please see the Specifications in the User's Manual (concise) which is a book. End User License Agreement for the Projector Software • Software in the projector consists of the plural number of independent software modules and there exist our copyright or/and third party
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
1
Projector
BZ-1
User's Manual (detailed)
Operating Guide
Thank you for purchasing this projector.
►Before using this product, please read all manuals for this
product. Be sure to read “
Safety Guide
” first. After reading them, store them in a
safe place for future reference.
WARNING
• The information in this manual is subject to change without notice.
• The illustrations in this manual are for illustrative purposes. They may differ
slightly from your projector.
• The manufacturer assumes no responsibility for any errors that may appear in
this manual.
• The reproduction, transfer or copy of all or any part of this document is not
permitted without express written consent.
NOTE
Trademark acknowledgment
Various symbols are used in this manual. The meanings of these symbols are
described below.
About this manual
WARNING
CAUTION
This symbol indicates information that, if ignored, could possibly
result in personal injury or even death due to incorrect handling.
This symbol indicates information that, if ignored, could possibly
result in personal injury or physical damage due to incorrect
handling.
Please refer to the pages written following this symbol.
• Mac
®
is a registered trademark of Apple Inc.
• Windows
®
, DirectX
®
, DirectDraw
®
and Direct3D
®
are registered trademarks of Microsoft
Corporation in the U.S. and/or other countries.
• VESA and DDC are trademarks of the Video Electronics Standard Association.
•
HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered
trademarks of HDMI Licensing LLC in the United States and other countries.
• Trademark PJLink is a trademark applied for trademark rights in
Japan, the United States of America and other countries and areas.
• Blu-ray Disc
TM
and Blu-ray
TM
are trademarks of Blu-ray Disc Association.
•
StarBoard
®
is a registered trademark of Hitachi Solutions, Ltd. in Japan and other countries.
All other trademarks are the properties of their respective owners.
NOTICE
This entry notices of fear of causing trouble.
(Type nos. BZ-1, BZ-1M)