Hitachi C47-WD8000 Owners Guide

Hitachi C47-WD8000 Manual

Get Hitachi C47-WD8000 PDF manuals and user guides View all Hitachi C47-WD8000 manuals
Add to My Manuals
Save this manual to your list of manuals

Hitachi C47-WD8000 manual content summary:

  • Hitachi C47-WD8000 | Owners Guide - Page 1
    INSTRUCTION MANUAL Rear Projection Color TV C47-WD8000 C57-WD8000 z Thank you for your purchasing HITACHI projection TV products. z In order to use the Rear Projection TV properly, please read this instruction manual carefully before using it.
  • Hitachi C47-WD8000 | Owners Guide - Page 2
    the batteries 8 FUNCTIONAL PARTS 9 Control panel and side panel 9 Rear panel 10 On the remote control unit 11 GETTING STARTED 12 Power on/off 12 Instructions for operating menu 13 of rear panel 65 ADDENDA 66 A guide to simple problem solving 66 Accessories 66 Specifications 67 2
  • Hitachi C47-WD8000 | Owners Guide - Page 3
    place any objects on the cord or allow it to overpass. If the cord or plug is damaged, please cut power supply immediately, then contact a service technician for inspection. gDo not overload wall outlets and extension cords as this can result in fire or electric shock. gDo not apply excessive force
  • Hitachi C47-WD8000 | Owners Guide - Page 4
    , e.g. house plant, vase, tea sets, etc. In case liquids are spilled inside the TVˈplease remove the plug from the wall outlet immediately and contact a service technician. In addition, if rubber or vinyl products remain in contact with the cabinet or screen of the TV for a long time, the TV surface
  • Hitachi C47-WD8000 | Owners Guide - Page 5
    power plug from the wall outlet. gDo not disassemble, repair or modify the TV by yourself. To prevent shock, disassembling the cabinet or touching the parts inside the TV by other than professional person is prohibited. Precautions when moving gWhen moving the TV, be sure to remove the plug from the
  • Hitachi C47-WD8000 | Owners Guide - Page 6
    set does not work properly, and you are unable to restore normal operation by following the "A guide to simple problem solving" section in your Instruction Manual, please unplug the set and consult service personnel. gIf the TV is dropped or the cabinet is damaged, remove the power plug immediately
  • Hitachi C47-WD8000 | Owners Guide - Page 7
    BEFORE USING THIS REAR PROJECTION TV Note This is not an integrated digital TV. To watch digital broadcast programs (if available), you have to purchase a Digital Set-Top Box that will receive and decode digital broadcast signals and input to the TV via the component input terminals. Location Select
  • Hitachi C47-WD8000 | Owners Guide - Page 8
    the battery cover of the ĸ Insert the batteries, paying Ĺ Replace the cover. remote control unit by pushing the special attention to their notched part of the cover with your polarities. fingers. Precautions when using the batteries ķ Do not use old and new batteries together. ĸ Do not use
  • Hitachi C47-WD8000 | Owners Guide - Page 9
    FUNCTIONAL PARTS Control panel and side panel POWER button POWER indicator Remote control sensor BRIDGE MEDIA status indicator P PC INPUT MEDIA INPUT terminals USB slot SD memory card slot Note: Before using these input jacks, please refer to the INSTRUCTION MANUAL on page 38,60 and 61. 9
  • Hitachi C47-WD8000 | Owners Guide - Page 10
    FUNCTIONAL PARTS Rear panel Audio/Video input terminals 3,4 Antenna terminal Monitor output terminals Audio/Video input & Component input terminals Multimedia Interface) IR BLASTER output jacks Note: Before using these rear panel jacks, please refer to the INSTRUCTION MANUAL on page 62-65. 10
  • Hitachi C47-WD8000 | Owners Guide - Page 11
    FUNCTIONAL PARTS On the remote control unit POWER button (Page 12) BRIDGE MEDIA buttons (Page 38-41) Program selector be used as program up and down buttons and as volume down and up buttons. The characters cursor" shown in this instruction manual will be referring to the ŸP+ źP- buttons. 11
  • Hitachi C47-WD8000 | Owners Guide - Page 12
    GETTING STARTED Power on/off TO TURN ON THE POWER Press the POWER button on the TV set. The power indicator will light up to indicate that the power is on. POWER button POWER indicator WHEN THE SET IS AT STANDBY The TV will be in standby mode and the blue power indicator becomes dimmer if the TV
  • Hitachi C47-WD8000 | Owners Guide - Page 13
    buttons on the remote control unit. ƽThe Chinese characters on the TV screen are supplied by Rico Company. The logos and symbols used in this instruction manual are intended for explanation purposes, they might differ from those shown on the TV. 1. Menu: After the power is on, press the MENU button
  • Hitachi C47-WD8000 | Owners Guide - Page 14
    GETTING STARTED Selecting the on-screen display language You can choose from two different languages (Chinese and English) for the on-screen displays. When necessary, you may change the displayed language following the procedures below. 1 Press the MENU button to display menu as shown on the right.
  • Hitachi C47-WD8000 | Owners Guide - Page 15
    GETTING STARTED Easy Preset It becomes convenient for the customers to program the TV using the remote control unit and detailed OSD of the TV set. Please follow the procedures below to start tuning. 1 Press the MENU button to display menu. Press the Ÿ ź cursor buttons to select the Setup option.
  • Hitachi C47-WD8000 | Owners Guide - Page 16
    ON-SCREEN DISPLAY MENUǏPICTURE MENUǐ Picture Menu Picture menu allows you to adjust various picture settings such as brightness, color, contrast and sharpness. You can also adjust the settings for color temperature, dynamic contrast, etc. Please follow the steps below. 1 Press the MENU button to
  • Hitachi C47-WD8000 | Owners Guide - Page 17
    ON-SCREEN DISPLAY MENUǏPICTURE MENUǐ 3 Press the ź cursor button until the second page in the Picture menu appears as shown on the right. These settings allow you to enhance or improve the visual condition of the picture. 3LFWXUHź  )LOP0RGH 2Q 1RLVH5HGXFWLRQ /RZ 90 2II '\
  • Hitachi C47-WD8000 | Owners Guide - Page 18
    ON-SCREEN DISPLAY MENUǏAUDIO MENUǐ Audio Menu Audio menu allows you to adjust various sounds settings such as treble, bass, balance and headphone volume. You can also adjust the settings for surround effect, perfect volume, etc. Please follow the steps below. 1 Press the MENU button to display
  • Hitachi C47-WD8000 | Owners Guide - Page 19
    ON-SCREEN DISPLAY MENUǏTIMER MENUǐ Timer Menu The Timer function for this TV uses a countdown timer system. It features On Timer, Off Timer and Auto Off. 1 Press the MENU button to display the menu. Press the Ÿ ź cursor buttons to select the Timer option as shown on the right. 3LFWXUH $XGLR
  • Hitachi C47-WD8000 | Owners Guide - Page 20
    ON-SCREEN DISPLAY MENUǏFUNCTION MENUǐ Function Menu Function menu allows you to select scan mode, decorative light on the front panel and multi picture mode, etc. Please follow the steps below. 1 Press the MENU button to display the menu. Press the Ÿ ź cursor buttons to select the Function option
  • Hitachi C47-WD8000 | Owners Guide - Page 21
    ON-SCREEN DISPLAY MENUǏFUNCTION MENUǐ 5 Follow the steps on page 20 to enter the Function menu and select the TV P.Size option as shown on the right. Press the Ż Ź cursor buttons to set the TV P.Size option to Expanded, 4:3 or 16:9 mode. )XQFWLRQź 6FDQ0RGH  3URJUHVVLYH '
  • Hitachi C47-WD8000 | Owners Guide - Page 22
    ON-SCREEN DISPLAY MENUǏFUNCTION MENUǐ 8 Follow the steps on page 20 to enter the Function menu 3KRWR ź  and select the Photo option, then press the Ź cursor button %DFNJURXQG 2II to enter Photo menu as shown on the right. 6OLGH0RGH  Press the Ʒͩ cursor buttons to select the
  • Hitachi C47-WD8000 | Owners Guide - Page 23
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ ǏPreset: TuningǐYou can perform search, skip, color system, sound system, program name,etc. on the Tuning menu. When the Easy Preset tuning is not desirable, you can adopt the following method to select programs. 1 Press the MENU button to display menu. Press the
  • Hitachi C47-WD8000 | Owners Guide - Page 24
    . 6NLS 6RXQG6\VWHP &RORU6\VWHP 3URJUDP1DPH 7915 $OO3URJUDP 6HOHFW 6HW 2II $XWR $XWR 2II 5HWXUQ In this way, you can manually select the desired program easily. Also, you can receive programs from RF output terminal of some equipment. In addition, you can receive AV program using
  • Hitachi C47-WD8000 | Owners Guide - Page 25
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ 7 The Sound System option in the Tuning menu allows you to select between various sound systems i.e. Auto, 4.5, 5.5, 6.0 or 6.5 (Note: Here the unit MHz is omitted.). Press the Ÿ ź cursor buttons to select the Sound System optionˈthen press the Ż Ź cursor buttons
  • Hitachi C47-WD8000 | Owners Guide - Page 26
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ 10 If the picture is noisy due to weak RF signals from some channels, you can reduce noise by using TV NR function. Press the Ÿ ź cursor buttons to select the TV NR option and then press the Ż Ź cursor buttons to select Off, Low and High to turn off noise
  • Hitachi C47-WD8000 | Owners Guide - Page 27
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ ǏPreset˖Fine TuningǐIt is unnecessary to fine tune in normal receiving condition. However, fine tuning is required in some areas where the broadcasting signals are weak. Please follow the steps as shown below. 1 Follow the steps on page 23 to enter the Preset menu
  • Hitachi C47-WD8000 | Owners Guide - Page 28
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ ǏPreset: Prog.ExchangeǐThe menu allows you to set the program to your desired channel position. Please follow the steps below. 1 Follow the steps on page 23 to enter the Preset menu, then select the Prog. Exchange option as shown on the right. 3UHVHWź
  • Hitachi C47-WD8000 | Owners Guide - Page 29
    , the quality of picture may be impaired due to strong RF signal from the antenna terminal. You can set the antenna attenuation to prevent such problem. Please follow the steps below. Follow the steps on page 23 to enter the Preset menu, then 3UHVHWź  select the Antenna Att. option as
  • Hitachi C47-WD8000 | Owners Guide - Page 30
    ON-SCREEN DISPLAY MENUǏSETUP MENUǐ ǏAuto Linkǐ Use this function to automatically switch on the TV and switch it to AV1 or AV5 mode when it detects a video signal from INPUT1 (or Y signal or HDMI signal) or INPUT5 (or S-VIDEO signal) terminal of the TV. It provides you ease when using with your
  • Hitachi C47-WD8000 | Owners Guide - Page 31
    ON-SCREEN DIPLAY MENUǏSETUP MENUǐ ǏAudio Outǐ Follow the steps on page 23 to enter the Setup menu, then select the Audio Out option as shown on the right. Press the Ż Ź cursor buttons to set the Audio Out option Fixed or Variable. The setting of the Audio Out option can change the output mode of
  • Hitachi C47-WD8000 | Owners Guide - Page 32
    moving mode. CANCEL DONE BACK RESET ˖[ 0 ] ˖[ 1 ] ˖[ 2 ] ˖[ 3 ] 2) If there is no operation for 3 minutes from the remote control unit, the TV will exit from MANUAL CONVERGENCE mode. Note*1˖The TV has three color projection tubes: one for red, one for green and one for blue. When mixed together
  • Hitachi C47-WD8000 | Owners Guide - Page 33
    MULTI PICTURE The Multi Picture function of this projection TV provides two modes, Split and P in P. To use the Multi Picture function allows you to enjoy the programs easily and comfortably. In normal picture mode, press the MULTI PIC. button to enter the Split or P in P mode. ǏSplitǐ 0XOWL
  • Hitachi C47-WD8000 | Owners Guide - Page 34
    MULTI PICTURE ǏP in Pǐ Follow the steps on page 20 to enter the Function menu and select the Multi Picture option, then enter the Multi Picture menu and select the Multi Picture option as shown on the right. Press the Ż Ź cursor buttons to set the Multi Picture option to P in P mode, then exit from
  • Hitachi C47-WD8000 | Owners Guide - Page 35
    MULTI PICTURE ƽOnce you enter the P in P mode, press the A/B button to select any one of the two pictures. A red symbol will appear on top of the selected picture, indicating: ˄1˅The TV speakers will output the sound from the selected picture. ˄2˅The monitor out terminals will output audio and video
  • Hitachi C47-WD8000 | Owners Guide - Page 36
    CH SURF FUNCTION The CH Surf function of this TV provides two modes, mode 3 and mode 12. To use this function allows you to enjoy the programs easily and comfortably. In normal picture mode, press the CH SURF button to enter mode 3 or mode 12. ǏMode 3ǐ Follow the steps on page 20 to enter the
  • Hitachi C47-WD8000 | Owners Guide - Page 37
    CH SURF FUNCTION ǏMode 12ǐ Follow the steps on page 20 to enter the Function menu and select the Multi Picture option, then enter the Multi Picture menu and select the CH Surf option as shown on the right. Press the Ż Ź cursor buttons to set the CH Surf option to mode 12, then exit from the menu. ƽ
  • Hitachi C47-WD8000 | Owners Guide - Page 38
    . Some camera need to be turned on before connecting to the USB cable, please refer to the camera instruction manual. If you do not follow the instructions stated in the camera instruction manual, it may be abnormal. Note: Refer to the above illustration for using SD or MMC memory card. Turn
  • Hitachi C47-WD8000 | Owners Guide - Page 39
    Note: In 16-motion-picture list mode, if a symbol appears on a thumbnail, it means that the audio format of this motion picture cannot be supported. If a symbol appears on a thumbnail, it means that this motion picture cannot be played. When enjoying motion picture, press the RETURN button No
  • Hitachi C47-WD8000 | Owners Guide - Page 40
    (include audio) in the digital camera, the audio that was recorded by the digital camera or appended to a photo cannot be played on the TV. ˄9˅Supported motion pictures of MPEG4 are up to 352h288, and motion pictures of Motion JPEG, PhotoJPEG and MPEG1 are up to 640h480. When the motion picture
  • Hitachi C47-WD8000 | Owners Guide - Page 41
    slot on the TV through PTP, you can only play photos. Refer to the digital camera instruction manual for PictBridge in detail. ˄15˅Some suggestions for playing the motion pictures: a) If your digital camera supports SD or MMC memory card, insert SD or MMC card to SD slot directly for viewing photos
  • Hitachi C47-WD8000 | Owners Guide - Page 42
    of the TV. 3.Please place the IR mouse near and face the IR sensor of the DVD player and the VCR. Please refer to the instruction manual of the DVD player and the VCR for the IR sensor location. ,5%/$67(5 RXWSXWMDFNV RU MONITOR OUT INPUT 4 INPUT 3 INPUT 2 Y/ VIDEO INPUT 1 Y/ VIDEO S-VIDEO
  • Hitachi C47-WD8000 | Owners Guide - Page 43
    AV NET ǏSetting up the type codes and the input terminals of the external audio/video equipmentǐ You must set up the Type and Input of the corresponding audio/video equipment after the audio/video equipment and the IR BLASTER cable are connected to the TV so that you can control your external
  • Hitachi C47-WD8000 | Owners Guide - Page 44
    AV NET 4.Press the Ź cursor button to enter the Input item of DVD as shown below. Press the Ÿ ź cursor buttons to select the terminal connected to your external audio/video equipment. You can choose Off, AV1, AV2, AV3, AV4 or AV5. AV1 is chosen as the DVD player in the example is connected to the
  • Hitachi C47-WD8000 | Owners Guide - Page 45
    AV NET ǏUsing the AV NET functionǐ You can use the AV NET function if the test succeeded. The DVD player which is connected to the INPUT1 terminals is used as an example to illustrate how to use the AV NET function.  1.Press the AV NET button to display the menu as shown on the right. Press the Ÿ
  • Hitachi C47-WD8000 | Owners Guide - Page 46
    AV NET ǏHow to learn the remote code of the external audio/video equipmentǐ  It enables you to realize the AV NET function by using this function if your external audio/video equipment's brands are not in the type code list. Please make sure that the IR BLASTER cable is connected as shown in Ǐ
  • Hitachi C47-WD8000 | Owners Guide - Page 47
    AV NET 4. Press the Ź cursor button to enter the Input item of Custom option and then press the Ÿ ź cursor buttons to select AV1. Notes: For DVD, AVR, CD, STB, DVD2, AVR2, CD2 and STB2, you can choose the Input from Off, AV1, AV2, AV3, AV4 or AV5. For VCR, CBL, VCR2 and CBL2, you can choose the
  • Hitachi C47-WD8000 | Owners Guide - Page 48
    AV NET 8.The word "Succeeded" will be displayed on the lower left corner of the screen if the code is learnt. The frame of the item will be in yellow, indicating this item has been registered. The word "Failed" will be displayed on the lower left corner of the screen if the TV fails to learn the
  • Hitachi C47-WD8000 | Owners Guide - Page 49
    AV NET ǏExternal audio/video equipment type codeǐ '9 2'( $0 IUHH LZD NDL OED OOHJUR PRLVRQLF SH['LJLWDO LJ(FKR ODXSXQNW OXH3DUDGH XEXJDR HOHVWLDO HQWUH KDQJKRQJ LQH9LVLRQ LUUXV RE GHFWLQ 9 DHZRR DQVDL D\WHN HFFD HQRQ HQYHU L9L'R LJLWUH RXEO]QH PHUVRQ QWHUSULVH
  • Hitachi C47-WD8000 | Owners Guide - Page 50
    AV NET ǏExternal audio/video equipment type codeǐ *UXQGLJ 0 4 DQVHDWLF DRMLH DUOH\'DYLGVRQ DUPDQ.DUGRQ DUZRRG HDGTXDUWHU LQDUL LVFKLWR LWDFKL RUQ\SKRQH XJKHV1HWZRUN6\VWHPV SVRQ 77 79 PSHULDO QJHUVRO QQR+LW QWHUIXQN QWHUYLVLRQ UUDGLR 9 HQVHQ DLVXL HQGR HQZRRG LPDUL
  • Hitachi C47-WD8000 | Owners Guide - Page 51
    AV NET ǏExternal audio/video equipment type codeǐ 7HPHL6KHQJ 7RVKLED 9LFWRU DPDKD 95HFHLYHU 9/LJKW LZD NDL OFR QDP SH['LJLWDO XGLRODE XGLRWURQLF XGLRYR RVH DSHWURQLF DUYHU HQWUH ODVVLF RE DHZRR HQRQ HUJXVRQ LQH$UWV LVKHU RQPL 7 DUUDUG ORU\+RUVH ROG6WDU UXQGLJ
  • Hitachi C47-WD8000 | Owners Guide - Page 52
    AV NET ǏExternal audio/video equipment type codeǐ *1 DOD[L HKXD HPLQL HQHUDO,QVWUXPHQW ROG6WDU RRGPLQG LWDFKL ZDOLQ HUUROG LX]KRX RND 06 0DFRP 0RWRUROD 0RYLH7LPH 1RZ 2DN 3936WHUHR9LVXDO0DWUL 3DFH 3DFLILF 3DQDVRQLF 3DQWKHU 3KLOLSV 3LRQHHU 5DGLR6KDFN 5DPSDJH 5HPEUDQGW
  • Hitachi C47-WD8000 | Owners Guide - Page 53
    MODE This button is used to switch between FASTEXT and LIST mode. FASTEXT is to link the four 'prompt' information on the lower part of the screen, represented by the four colors which match the color buttons on the remote control. TO ADJUST THE TELETEXT CONTRAST 3LFWXUHź  &RQWUDVW
  • Hitachi C47-WD8000 | Owners Guide - Page 54
    ASPECT MODE You may set different aspect modes to view the image with different signal formats. ǏTV P.Sizeǐ This function is available for conventional TV broadcast (RF) signal input. When other non RF signals are received, this function is not available and the size of the picture may not vary
  • Hitachi C47-WD8000 | Owners Guide - Page 55
    ASPECT MODE ƽTo switch aspect mode, please press the P.SIZE button, the TV will display the corresponding aspect mode momentarily at the lower part of the screen. For example, set the current aspect mode to lj16:9NJ as shown at the lower left side. If lj16:9 ZoomNJ is set as
  • Hitachi C47-WD8000 | Owners Guide - Page 56
    ASPECT MODE ǏAuto P.Sizeǐ The Auto P.Size is designed for HDMI input. Follow the steps on page 20, 21 to enter the menu, then access the Function menu and select the Auto P.Size option. Press the Ż Ź cursor buttons to change between On and Off. 1. With the signals such as 576i, 576p, 480i and 480p
  • Hitachi C47-WD8000 | Owners Guide - Page 57
    DVD player, press and hold the RECALL button, followed by the ķbutton. Brands of DVD Player HITACHI PIONEER PANASONIC TOSHIBA PHILIPS JVC SAMSUNG SONY RCA MITSUBISHI ONKYO ZENITH ORITRON SKYWORTH BBK SHINCO Press RECALL , ķ RECALL , ĸ RECALL , Ĺ RECALL , ĺ RECALL , Ļ RECALL , ļ RECALL , Ľ RECALL
  • Hitachi C47-WD8000 | Owners Guide - Page 58
    OTHER FUNCTIONS TV/VIDEO button Press the TV/VIDEO button to select the input mode.  AV1 AV2 PC AV3 AV5 AV4 RECALL button Press the RECALL button to display the program No. or AV No. and the related information. Pressing the RECALL button again, the display will disappear. ķWhen
  • Hitachi C47-WD8000 | Owners Guide - Page 59
    OTHER FUNCTIONS HD SIGNAL THROUGH MODE This TV incorporates a HD signal through mode to display more actual HD picture. When receiving HD signal, you can switch between the HD signal through and HD signal non-through modes to obtain optimum picture. To access HD signal through mode, please follow
  • Hitachi C47-WD8000 | Owners Guide - Page 60
    I N P U T 5 I N P U T 5 CONNECTION WITH OTHER EQUIPMENT Jacks and connections of side panel The side panel jacks are provided to allow you to conveniently connect a camcorder, VCR, PC, etc. ǏThe typical connection of video camera, VCR, etc.ǐ Side panel jacks or A U D I O A U D I
  • Hitachi C47-WD8000 | Owners Guide - Page 61
    N O P U T 5 PC Side panel jacks Explanations˖ ˊ This TV supports PC with the specification of VESA 640h480@60Hz, VESA 800h600@60Hz or VESA 1024h768@60Hz automatically. If your PC cannot be set automatically, please set it manually. When disconnecting, please turn off the PC power, then turn
  • Hitachi C47-WD8000 | Owners Guide - Page 62
    CONNECTION WITH OTHER EQUIPMENT Jacks and connections of rear panel ǏThe typical connection of rear panel 1ǐ 2XWVLGHDQWHQQDRU &$79FRD[LDOFDEOH 5) DGDSWHU RU ,5%/$67(5 FDEOH RU RU L R INPUT 6WHUHRV\VWHP VIDEO L R INPUT 9&5 S-VIDEO VIDEO L R RU OUTPUT /DVHUGLVFSOD\HU9&'SOD\
  • Hitachi C47-WD8000 | Owners Guide - Page 63
    OTHER FUNCTIONS ǏThe typical connection of rear panel 2ǐ +'0,+'0, '9,+'0, RU '9,WR+'0,&DEOH +'0,&DEOH HDMI Output '9'3OD\HURU +'7967% RL AUDIO OUT DIGITAL OUTPUT '9'3OD\HURU +'7967% About HDMI HDMI is the next-generation all digital interface for consumer electronics. HDMI
  • Hitachi C47-WD8000 | Owners Guide - Page 64
    CONNECTION WITH OTHER EQUIPMENT ǏThe typical connection of79$6&(17(5ǐ MONITOR OUT S-VIDEO INPUT 4 INPUT 3 INPUT 2 Y/ VIDEO INPUT 1 Y/ VIDEO PB CB PB CB VIDEO IR BLASTER L AUDIO R FIXED/ VARIABLE PR CR PR CR (MONO) (MONO) (MONO) (MONO) TV AS CENTER HDMI CENTER OUT 6WHUHRV\VWHP
  • Hitachi C47-WD8000 | Owners Guide - Page 65
    CONNECTION WITH OTHER EQUIPMENT About the jacks and connections of rear panel 1.Refer to the operation manual of your electronic equipment for additional information on connections. 2.If your device has only one audio output (mono sound), please connect it to the left
  • Hitachi C47-WD8000 | Owners Guide - Page 66
    radio equipment away from the TV set. Accessories No. Description 1 Instruction manual 2 Remote control unit (CLE-962) 3 Battery (For CLE-962) 4 IR BLASTER cable 5 Caster holder 6 Antenna adapter Quantity 1 1 2 2 4 1 C47-WD8000 Yes Yes Yes Yes Yes Yes C57-WD8000 Yes Yes Yes Yes Yes Yes 66
  • Hitachi C47-WD8000 | Owners Guide - Page 67
    ADDENDA Specifications Model Screen size Power supply Power consumption Reception system RF/VIDEO COMPONENT/HDMI Frequency range Antenna input impedance Speaker Sound output Comb filter Digital convergence Magic focus Perfect volume NICAM/A2 BBE SRS P in P Teletext S-VIDEO INPUT VIDEO INPUT
  • Hitachi C47-WD8000 | Owners Guide - Page 68
    , modification or erasure of record data, etc.) caused by use or misuse of product. ƵHitachi is not liable for any damage caused by neglect of the instructions described in the instruction manual. ƵHitachi is not liable for any damage caused by misuse or malfunction through simultaneous use of this
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
Thank you for your purchasing
HITACHI
projection TV products.
In order to use the Rear Projection TV properly, please read this instruction manual
carefully before using it.
INSTRUCTION MANUAL
C47-WD8000
C57-WD8000
Rear Projection Color TV